Contour CHD1080p, HD1080p User Manual
Product Guide
1
About the Camera
a Power Button
b Battery Status
c Record Button
d Rotating Lens
e Record Status
f Memory Status
g Resolution Switch
h USB
i Charge Indicator
j Battery Latch
k Battery Slot
l MicroSD card
Quick Start
2
ContourHD1080p
Getting Ready
• Open the back door.
• Insert battery with (+) aligned
and close latch.
• Align back door slightly above
camera and slide down until
it locks in.
Power Up
• Push power button.
• Camera beeps and lights turn off.
• You are ready to record.
Note: Power up with record switch
forward to enable silent mode.
3
Record
• Start: slide switch forward.
• Stop: slide switch back.
• Congrats, your fi rst video!
Share
• Install Easy Edit Software directly from MicroSD card provided or
download at: www.VholdR.com/support/software.
• Connect camera to computer with USB cable.
• Set date and time on your camera using the Easy Edit Software
• Then import, clip and share your videos…
Note: HD is beautiful but some computers cannot play smooth HD video. Visit
www.vholdr.com/support for the latest information on computer requirements.
4
ContourHD1080p
Video
Use switch under back door to select video resolution.
Default Resolutions:
HI: 1920 x 1080 @ 30 fps
LO: 1280 x 960 @ 30 fps
Alternate Resolutions:
1280 x 720 @ 30 fps
1280 x 720 or 848 x 480 @ 60 fps
Use Easy Edit Software to select alternate resolutions, adjust video
and mic settings, and set camera time.
Power
Recharge
• Connect to computer with
USB cable.
• Red light indicates charging.
• Charge complete when camera
beeps and red light turns off.
(about 4 hrs)
Power Off
• Press and hold power button
for 3 seconds.
• Double beep & lights turn off.
Note: Camera automatically turns
off after 15 minutes of inactivity.
5
Status
Press power button to check status.
• Memory / Battery Available
Green > 80%
Yellow 20-80%
Red < 20%
• Record Status
Green = ready
Red = recording
Flashing = memory full or corrupt
2GB microSD card included. Accepts up to 16GB microSD.
(SDHC compatible)
Error Conditions
• Time invalid: Memory/battery fl ash red at power on.
• Memory full: (3) beeps, recording stops.
• Memory corrupt: (3) beeps, shuts off.
• No card or memory corrupt: (3) beeps, shuts off.
• Low battery: lights fl ash, beeps, shut off.
• Battery dead: lights fl ash, beeps, shut off.
• No beeps: camera in silent mode.
6
Note:
Always turn
camera
off before
removing
SD card.
ContourHD1080p
Loading...