Condec PIN7000, PIN7010 Specifications
PIN7000/PIN7010
Pneumatic Pressure Intensier
PIN 7000
Please refer to price schedule for part numbers and
part numbering guide.
Pump up your system with the PIN7000 or PIN7010
pneumatic pressure intensifier!
Both the PIN7000 and PIN7010 operate using any clean
dry air or gaseous nitrogen. Containing an automatic
precision intensifying system, these models generate up
to 10 times the input pressure.
This easy-to-operate system provides fingertip control
with the exclusive micro-metering valve for pressure adjustment and venting. Monitoring has never been easier
with three gauges that account for regulated pressure,
accumulated pressure, and output pressure. These units
are completely equipped with quick-disconnect fittings
and hoses for rapid input and output pressure.
These pressure intensifying systems were designed
for custom use. The compact PIN7000 incorporates a
portable configuration for on-the-go operation. The rugged PIN7010 is a rack-mount model, ideal for frequent
in-house use.
Applications
• High pressure supply, up to 10,000 psi, for test equipment
• Ideal for uid-free high pressure calibration
Standard Features
• Internal precision pressure intensier generates up to 10 times input
pressure
• Electronically controlled intensier system
• Precision regulator to adjust input pressure
• Three gauges to monitor regulated pressure, accumulated
pressure, and output pressure
• Patented micro-metering valves for pressure adjustment
and venting
• Quick-disconnect ttings and hoses supplied for input and
output pressure
• Easy to operate, training can be accomplished in 10 minutes
• Available in self-contained enclosure with carrying handles
(PIN7000) or 19 inch rack-mount version (PIN7010)
Options/Accessories
63258 ........Additional operating & maintenance manual
59533 ........External portable pressure cylinder with (83.3 cu ft.
3694 psi test pressure) CGA-580 shutoff valve/internal
rupture disk and carrying handle
58478 ........Pressure trap Literature sheet PN 58596
55280 ........Additional test port (output) 4-1/2 ft. long hose with
quick-disconnect (SST) plug on one end and 1/4 in.
37º female AN swivel pressure fitting on opposite end
55360 ........Additional fill port (input) 4 ft. long hose with CGA-580
male nipple on one end and 1/4 in. 37º female AN
swivel pressure fitting on opposite end
(Specifications on back)
PIN 7010 Rack-mount
CP-7
PIN7000/PIN7010
Specications
TEMPERATURE RANGE:
Operating: 40°F to 140°F (4°C to 60°C)
Storage: 0°F to 185°F (-17°C to 85°C)
Relative humidity: 95%, non-condensing
PRESSURE MEDIA:
Clean dry gaseous nitrogen or clean dry air
REGULATED PRESSURE GAUGE:
Size: Two and one half-inch diameter
Range: 0-1500 psi
ACCUMULATOR PRESSURE GAUGE AND
OUTPUT PRESSURE GAUGE:
Size: Two and one half-inch diameter
Range: 0-15,000 psi
CONTROL VALVES:
Type: Micro-metering with positive shut off, adjustable stop and
replaceable seat, non-destructible
Material: 300 series stainless steel outer body
INTERNAL PIPING:
Tubing: 1/4 in. O.D. and 1/8 in. O.D. 300 series stainless steel,
seamless
Couplings: 300 series stainless steel Swagelok
®
OUTPUT TEST PORT:
Style: Quick-disconnect type
Pressure rating: 10,000 psig minimum, connected
or disconnected
PRESSURE HOSES:
Quantity supplied: 2; one input and one output
Length: 4 ft., nominal each hose
BOOSTER PUMP SOLENOID VALVE:
Type: Three-way, normally closed, electronically controlled
PRESSURE RATING:
1500 psig
POWER REqUIREMENTS:
115 VAC, 50 Hz, 10 watts
INPUT PRESSURE REGULATOR:
Pressure rating: 3000 psi maximum
Output pressure range: 0-1000 psi
Construction: Self-relieving, single stage regulator
ExTERNAL HOUSING:
PIN7000: Deep drawn aluminum case with cover and handles
PIN7010: Sheet aluminum enclosure
ExTERNAL FINISH:
PIN7000: Deep drawn aluminum case
PIN7010: Sheet aluminum
WEIGHT:
Approximately 40 lb (18.1 kg), nominal including all hoses and
power cord
PIN7010 DIMENSIONS
A = 19 in. (482.60 mm) F = 10.47 in. (265.93 mm)
B = 0.25 in. (6.35 mm) G = 2.60 in. (66.04 mm)
C = 2.25 in. (57.15 mm) H = 8.00 in. (203.20 mm)
D = 1.48 in. (37.59 mm) I = 10.36 in. (263.24 mm)
E = 0.55 in. (13.97 mm) J = 17.18 in. (436.37 mm)
Rack-mount dimensions are for reference only. Consult factory for
cutout dimensions.
PIN7000 dimensions (not shown):
18 in. (457.2 mm) W x 11 in. (279.4 mm) D x 11.5 in. (292.1 mm) H
Specifications subject to change without notice
© Condec 2012 Catalog PN 64749 1/12
Loading...