Page 1
8-Channel CCTV Surveillance Kit
User Manual
C8CHCCTVKIT
V1.0
Page 2
i
CONTENTS
Chapter one Products Introduce
................................... 4
1.1 Technical Parameter .......................................................... 4
1.2 Product overview ................................................................ 4
1.3 Key Features ...................................................................... 4
Chapter Two Hardware
............................................... 5
2.1 H.264 standalone DVR ....................................................... 5
Chapter Three Operation
............................................ 8
3.1 Operation instruction .......................................................... 8
3.2 Power On ............................................................................ 9
3.3 Shutdown .......................................................................... 10
3.4 Multi Channel .................................................................... 11
3.5 Preview ............................................................................. 11
3.6 Recording operation ....................................................... 11
3.7 Playback video ................................................................. 12
3.8 How to control PTZ ........................................................... 13
3.9 Alarm control .................................................................... 14
3.10 Display Adjust ................................................................. 14
Chapter Four Menu Operation Guide
........................... 16
4.1 Recording Setup ............................................................... 16
4.2 Camera ............................................................................. 17
Page 3
ii
4.3 Network Setup .................................................................. 18
4.4 System Setup ................................................................... 21
4.5 System Management ........................................................ 23
Chapter Five IE Preview
............................................ 25
5.1 logging on interface ........................................................ 25
5.2 System Settings ................................................................ 26
5.3 Status control .................................................................... 28
Chapter Six Asee series phone software for use
........... 30
6.1 Asee .................................................................................. 30
6.1.1 Instructions of Android ................................................... 30
6.1.2 Instructions of Blackberry .............................................. 34
6.1.3 Instructions of iPhone .................................................... 37
6.1.4 Instructions of Symbian ................................................. 41
Chapter Seven Instructions of imac
.......................... 44
7.1 Essential condition ............................................................ 44
7.2 Installation and operation instructions .............................. 44
Chapter Eight FAQ (Frequently Asked Questions)
........... 47
Page 4
3
Power
This DVR adaptor is DC12V; please make sure the power supply voltage before turn on the machine.
If long time do not use the machine, please turn off the power of DVR machine, and let the electric plug away from power socket;
2. safety
This DVR only for indoor use, as for prevent short circuit or electric danger, please do not let the DVR in the raining or humid area.
In case any solid or liquid inside the case of DVR, please turn off the power immediately, and ask the qualified technician check it before reboot the DVR;
The DVR is the precision machine, there is nothing for repair by customers themselves in it, when it break down, please ask the qualified technician to
check and repair, or contact with the agents of it.
3. Installation
Please keep the DVR in level for installation;
Pay attention to equipment ground;
For the first time to install the DVR, please make sure if the hard disk drive install or not;
Prevent to open the case and change the hard disk drive in electrified;
Propose to select the performance of hard disk drive will be 7200 rotating speed person second;
Please select the appropriate installation site, so let the air can be free flow inside the DVR, prevent the machine overheating;
Please do not install the DVR nearby the radiator, air chute etc. heat source,
or where the direct sunlight, too much dust, or mechanical vibration or attack;
Page 5
4
Chapter one Products Introduce
1.1 Technical Parameter
Compression standard
H.264 baseline profile@L3.1
Video input
Composite 1.0Vp-p/75Ω, BNC×8
Video output
Composite 1.0Vp-p/75Ω,BNC×1, VGA×1
Resolution
Preview D1 704×576（PAL）， 720×480（NTSC）
Recording D1 704×576（PAL）， 720×480（NTSC）
CIF 352×288（PAL）， 320×240（NTSC）
Frame rate
Preview/ recording
8ch 200fps(PAL), 240fps(NTSC)
Audio input
-8dB~22k,RCAx4(8ch)
Audio output
-8dB~92dB,RCAx1
Audio decode
ADPCM
Alarm input
4ch input
Alarm output
1ch output
Recording mode
Manual recording, timing recording , motion detection recording and external
alarm recording
Simplex/duplex/ triplex
triplex(recording, playback , LAN transmission)
LAN
RJ45(10M/100M self-adapting)
PTZ control
Yes
Communication
RS485×1，USB2.0×2
USB
USB mouse control
Hard disk drive
1
Remote control unit
Yes
Dimension
Main board size : 220mm x 112mm
Power supply
AC110-230V
1.2 Product overview
The Conceptronic CCTV Surveillance Kit offers an ideal way to securely monitor a house or business. With four
cameras focused on different areas, all access points to the front, rear and sides of the property will be
covered. All eight channels can easily be monitored from any PC, laptop, tablet or smartphone using the free
software provided. Cameras all conform to Weatherproof standard IP65, and operate in temperatures from
-10°C to 50°C. Built-in infrared LEDs support night monitoring for distances up to 15 metres, providing
peace-of-mind twenty-four hours a day. The quality cameras also offer full-screen, high resolution recording
and playback, and recording your data is made easy and efficient with a high compression rate and up to 2 TB
of disk capacity. Everything you need for safe, secure surveillance of your home or business.
1.3 Key Features
4 x 1/3.7'' CMOS 480TVL Day/Night Outdoor Cameras with an 8-CH Digital Video Recorder included.
One 2.5”/3.5" disk slot supports storage capacity of up to 2TB
Built-in infrared LEDs for night viewing up to 15m
Weatherproof IP65-rated
Wide operating temperature range (-10°C to 50°C)
D1 real time, full screen, high resolution recording
H.264 compression for efficient data transfer and storage
Built-in USB port for backup, firmware upgrade and mouse
Supports VGA, HDMI output
Supports iPhone/Android/Blackberry remote viewing over the Internet
Page 6
5
Chapter Two Hardware
2.1 H.264 standalone DVR
2.1.1 Hard disk Installation
For the first use, please install the hard disk
○1Remove the screws on both ○2extracted from the next cover up ○3connect the data wire
○4connect the power wire ○5fix the screw of the hard disk ○6fix the screw of the hard disk
⑦close cover ⑧fix the cover
2.1.2 Rear panel and Front panel of DVR
Front panel
Page 7
6
Rear panel
Item
Interface
Description
1
VIDEO IN
8ch video input 2 AUDIO IN
8ch audio input 3 V-OUT
1ch video output 4 A-OUT
1ch audio output 5 VGA
VGA monitor ６ HD-OUT
HDMI interface ７ NETWORK
RJ45
８
USB
First USB for backup or upgrade system of DVR; Second
USB for mouse
９
ON/OFF
Power supply switcher
１０
DC-12V
Power adaptor port
１１
ALARM IN：IN1-IN4 alarm input port
RS-485：A , B
ALARM OUT: N1 alarm output port, every channel connect
GND、OUT、COM;
every two channel OUT, COM port is for GND;
2.1.3 Alarm input port
4chanel alarm input, the mode of alarm input is no restriction (possible is normal open also normal close);
the GND alarm detector connect to COM under parallel connection (the power of alarm detector supply by external power supply;
the ground terminal of alarm detector join-up in parallel with DVR;
the NC of alarm detector connect with the input end (alarm) of DVR;
when you want to reset the remote alarm of triggered , the +12V power supply of alarm detector supply by DVR, for example, smoke detector.
When you select the external power supply, please share the GND with DVR;
Alarm input circuit:
Alarm inlet connection:
2.1.4 Alarm output port
Page 8
7
4 way switching value alarm output, selectable in normally open contact, also selectable in normally closed contact, the external alarm
device should be
need Vcc;
Page 9
8
Chapter Three Operation
3.1 Operation instruction
3.1.1 Remote control AND Front panel keypad
Table：
S/
N
KEYpad
Name
Operating
instruction
S/
N
Keypad
Name
Operating
instruction
1
【POWER】
Power ON/OFF
8
【 ENTER 】
【OK】
This button is used
as“enter”and“ok” key in most
circumstances
2
【MENU】
Access main menu
3
【ESC】
Exit operation or enter upper
menu
Close soft keyboard
Close current window
Exit from current control
Return to last menu
Exit from PTZ control under
preview state
9
【PTZ】
Access/exit from PTZ control
under preview state
4
【 】
Slow playback,1/2×, 1/4×,
1/8× and single frame play
10
【+/-】
Volume or number
increase/reduction Select item
of the list
5
【 】
Fast playback, 2×,4× and 8×
playback
11
【 ZOOM
IN/OUT】
Lens control
12
【0~9 10+】
Digital input Corresponding;
Channel is magnified in full
screen under preview state
13
【FN】
Short cut
6
【 】
Playback stop
14
【 】
Switching of
1/4/8/9/16/24/32Preview mode
【 】
Play / Pause
15
【ALARM】
Alarm reset
【 ▲.▼.
】
Four-way to move the focal
point in main menu, up and
down to move in the normal
window, to control pan driver
Page 10
9
to move in
the PTZ control windows
【REC】
To mode of recording
16
【CLEAR】
Clear alarm
7
【SEARCH】
Search for playback time
choosing
3.1.2 How to use mouse of DVR (for right hand mouse)
1
Left key single click
To any function menu icon click the mouse left key into the menu
To run the control point out operation
Change again select frame or motion detection piece mode
Click the assemble frame popping to pull down the list
In the input frame, can select digit, character, lowercase, block letter, left click
mouse on the keyboard of character input, that’s. ← say move back, ＿ say
blank，Shift say switch case .
2
Right click mouse
Right click mouse, popping the shortcut menu, as follows;
。
Through the menu can be switching preview screen window mode, start
replays, PTZ control. Four pictures playback mode, the point of the right mouse
button, Can in a single picture, four pictures, eight pictures (8 road playback), 16
screen (16 road playback), twenty four picture,thirty two picture,
broadcast control switch view show or hide broadcast control bar.
3
Double click left
button
To run the ActiveX Control ActiveX special operation, For example, double click
the certain item of record listed file, then the system will playback the segment
record video.
4
Dragging the mouse
Depress the left key and dragging the mouse, banding select Motion detection
area, depress right key of mouse and Dragging, cancel the banding select area.
Dragging playback ProgressBar back and forth to dolly moves, to achieve the
playback position adjustment. Dragging the audio and video regulation
parameter bar dolly moves, to achieve the parameter adjustment.
3.2 Power On
Boot-strap
If【POWER】pilot lamp off, please follow the operation step by step:
First step: if the power does not plug into, please plug into the power, then the DVR begin to start, by now, if the DVR still inactive, to enter the next step;
Second step: turn on the power supply of the DVR at the back panel, DVR begins to start.
If【POWER】pilot lamp to offer RED, press the 【POWER】key, DVR begins to start.
The video output mode of DVR ’s the default setting is multi picture channel mode after starting the DVR , if the time of start the DVR is in the Timing Recording
Setting, the DVR will automatically to start the Timing Recording function, the corresponding channel’s recording pilot lamp will be light, the DVR is normal operation.
Page 11
10
Button
Description
Button
Description
Main Menu
PTZ control
Wizard language
Alarm control
Multi channel
Display setup
Recording Control
Exit
Playback Back up
If before starting, the system not to install hard disk, into the system, will tip: system didn't detect any hard disk connection!
Note:
In this dialog you can select language and quickly set various of parameters.
3.3 Shutdown
There are two safety mode for Shutdown
Enter【Exit】,select【Power Down】.
Abnormal shutdown
Through the rear panel to shutdown
During the DVR running, directly to turn off the power through the rear panel power switch, please avoid as much as possible to do it. (specially while the DVR
Page 12
11
recording).
Directly to pull up the power cable of DVR
While the DVR running, directly to pull up the power cable of DVR, please avoid as much as possible to do it. (specially while the DVR recording).
Caution: In some area, the power supply is irregularity, it will cause the DVR working not normal-operation, the DVR will be damaged in serious. In this
surroundings, suggest select the stabilized voltage supply.
3.4 Multi Channel
1/4/8/9preview screen mode switch
3.5 Preview
After log in system of DVR, system will automatically directly enter the preview mode
In the preview picture, you can see the overprint date, time, channel name, if the date and time is not correct show on the picture, re setting the date. There is a alarm
input mode icon. (the meaning of every kind of icon as following table)
Channel picture attention
3.6 Recording
operation
Customer can according to select
the different kind of recording mode in
this system. For the different kind of
recording mode you set, the channel
will be showed the mark on everyone
channel.
Manual recording
Note: Manual recording operational requirement the user should have “recording” permission. Please make sure the hard disk drive has been
installed and it has been formatted.
1）Input manual recording operation menu
Single click right key of mouse or In main menu=> recording control can into manual recording operation menu. Under preview mode, press REC key or on the
Remote controller unit key into recording control operation menu, as follows:
2) The explanation of manual recording operation menu
【manual recording】 Priority level highest, no matter currently what status of every channel, after carry out the
manual press, corresponding channel will be record common in progress;
【Auto recording】Setting channel recording by setting condition to record under Timing, Motion detection and Alarm in Recording Setting;
【Stop Recording】All video channel stop recording;
1
Channel is video when channel
video pictures showed this symbol
2
Channel happen when dynamic
test, channel video pictures
showed this symbol
3
Channel open sound, the channel
video pictures showed this symbol
Page 13
12
3.7 Playback video
Button
Description
Button
Description
Synchronous/asynchronous play
Voice adjustment
frame by frame
1/4/8/9screen(switch image)
Speed slow
Hide / display list
Speed normal
recording date
Speed fast
Play/pause/stop
Sound off/on
rewind
Note:
1) During playback the Playback Tool will show the file playback speed, channel, timing, playback speed etc. information in the Playback control panel;
2) Can’t same time to select the Fast forward operation function in over 2 channel, only progress in anyone channel;
3) Can drag the Playback Speed toolbar by mouse;
4)In this dialog you can select the video precise to the second.
Page 14
13
3.8 How to control PTZ
【Zoom】Lens in the current play far closer picture, use the mouse wheel also can undertake variable times control.
【Focus】Slight adjusting the focal length
【Iris】Aperture size adjustment
【Speed】Through the slider adjust rotation stepinterval, yuntai mainly used to control direction operation, the step length of turning the faster yuntai.
【Preset】Adjust the camera Angle, then direction and the corresponding input and clicking on [ set] button, preset dots to set the dots in the preset rastelli.
Input presets dots and click on [Transfer] button, the camera will be transferred to the preset point corresponding position.Click[remove ] button, this presets dianjiang
be cleared
【Set】Click 【Start Tour】 the trajectory of said no corresponding, click the 【 add Preset 】 and 【 delete Preset point 】, 【Clear Tour】 the cruise lines.
【Start Tour】begin to track record, was registered date 【 end Tour】， thus set up from the corresponding track circuit.
【Left Limit】Began to limit scanning Settings, was registered date 【 right Limit 】, thus set up corresponding limit scanning.
【Add Preset】Add presets point to the cruise lines.
【Delete Preset】Cruise lines from deleting preset points.
【Clear Tour】Remove the cruise line designated.
Note: some equipment doesn't fully support all function, depending on the specific yuntai equipment and different.
【Control】PTZ Control
【Tour Scan】Point between cruise control.
【Pattern Scan】Track patrol control.
【PTZ Reset】Remove all Settings, original reset to the original state.
【Limit Scan】Yuntai boundary scan control around.
【Auto Pan】Remove the cruise line designated
Note: some equipment doesn't fully support all function, depending on the specific yuntai equipment and different.
Page 15
14
3.9 Alarm control
【Set Alarm】Selection need protection channel, click confirm corresponding channel after in protection status
【Clear Alarm】Remove protection condition, not alarm input to react
【Alarm Output】Open the alarm output.In the premise of no trigger alarm input,user can operate the output.for example, some alarm switch is connected with a
lamp,lamp is open when alarm is trigered
【All】Can choose all the channels
3.10 Display Adjust
(1)Video
【Video Effect】Optional: standard, downy, sharp, custom.
【Default】Restoring default effect, for custom video effects, copy standard effect parameters.
Through the slider fluctuation sliding, respectively adjustable brightness, contrast and saturation, tonal, etc.
(2)Monitor
【Device】Optional: VGA output, TV output etc display output device.
【Default】Restoring default display parameters.
Through the slider fluctuation sliding, respectively adjustable brightness, contrast and saturation, tonal, etc.
(3)Setup
Page 16
15
【Device】The first generation of DVR’s optional: VGA output, TV output etc display output devices, the system may support multiple equipment and output.
The second generation of DVR’s optional:VGA Output+HDMI Output、TV Output.
【Resolution】Setting the resolution of the display device.
The first generation of DVR default VGA resolution is 1024 x 768;
The second generation of DVR default VGA resolution is 1280 x 1024;
Page 17
16
Chapter Four Menu Operation Guide
4.1 Recording Setup
(1) Recording Setup
【Channel】Choose the need to install passage "whole" says setting all channels.
【Image Size】CIF/HALF D1/D1,if the model is 960H,the encoding format maybe is 960H/D1/CIF,if the model is 1080P,the encoding format maybe is 1080P/720P,
different models,different encoding format
【Encoding Mode】Including fixed bitrate, dynamic bitrate.
【Image Quality】Client-side image quality, the higher the quality the clearer. Choice scope: minimum, low, general, high, highest
【Frame Rate】Can click on the button manually input, 1 ~ 25 frames per second (PAL) or 1 ~ 30 frames per second (NTSC) continuous adjustable.【Audio】Can select
close, open according to requirements
【Pre-Alarm Rec】Can select close, open according to requirements
(2)Channel Overlay
【Channel】Choose the need to install passage "whole" says setting all channels.
【Channel Name】Can manual corresponding input channel's name
【Channel Display】Can choose according to the requirements of users don't use, the top-left corner, left, lower, middle and downward, upper, right, and lower.
【Time Display】Can choose according to the requirements of users don't use, the top-left corner, left, lower, middle and downward, upper, right, and lower.
(3)Recording Schedule
Page 18
17
【Channel】Choose the need to install passage "whole" says setting all channels.
Each longitudinal row of every seven days a week, said the 24 hours a day manipulated said, mouse the left key click on the small square footage, setting time to
clean it has chosen right-click drag video time.
4.2 Camera
When the system starts the camera will detect the format of video
(1) PTZ Setup
【Channel】Choose regional channels, yuntai Settings "whole" says setting all channels
【PTZ Protocol】Yuntai equipment communication protocol
It contains these options:Pelco_D、Pelco_P、LILIN、MINKING、STAR、VIDO、NEON、DSCP、HY、N-control、RM110、SAMSUNG，the default option is Pelco_D.
★Note: yuntai parameter Settings every channel need after completion in Settings of gc1318 alone.
【PTZ Address】Yuntai equipment address, digital range 0 to 255.
★Note: here with the address must be consistent ball machine address, we can't control the ball machine.
【Bit-rate】Yuntai equipment baud rate.
(2)Video Setup
【Video Mode】Provide PAL and NTSC both formats video formats choice, modify after you must restart your system can take effect.
【Channel】Choose to set the video Settings area passage "whole" says setting all channels
【Reserved Section】Click Settings enter. The white areas for privacy area
【Buzzer Alarm】Happen when video lost choice whether or not to allow buzzer warning
【Alarm Output】Happen when video lost upcoming linkage selected channel corresponding alarm output
(3)Motion Detection
Page 19
18
【Channel】Choose need to set up mobile testing area passage "whole" says setting all channels
【Sensitivity Setting】Can be set to give: minimum, low, general, high, highest
【Detection Area】Click Settings enter.
Green area for dynamic test, grey areas design.ferroconcrete-brick undefended area for. Press the mouse left key to drag on the lower detection area to the right,
press the mouse button clearance. Detection area drag The save and exit button can save Settings, some give up and quit button abandon modification.
【Buzzer Alarm】Occur when dynamic test on the buzzer whether to allow the alarm
【Trigger Recording】That will happen when dynamic test on the linkage of selected channel fast ball trigger video
【Alarm Output】In this passage setting user can be copied to the other channels, fulfill the same dynamic detection alarm Settings
4.3 Network Setup
(1)General Setup
【DHCP】After checked automatic assignment device will get IP address, subnet mask, the default gateway, the DNS server, etc
【UPnP】Can choose according to the requirement
【IP Address】Network logic address can according to the requirements set
【Subnet Mask】Server subnet mask
【Default Gateway】Server gateway
【DNS Server】DNS server addresses
【Server Port】Data port, initial socket for 7777
【HTTP Port】the default port for 80. If change, when using IE browser, need to monitor the IP address, adding new socket. If use IP address to 82, from the original
browsing http://192.168.0.19, change for http://192.168.0.19:82.
【Handset Port】Network phones socket, initial socket for eight thousand eight hundred and eighty eight
(2)Dial-UP Setup
Page 20
19
Tip: PPPoE dial-up successful, according to 【 PPPoE IP 】 shown on IP address, users can remote access hard disk video recorder. By nic LAN IP access.
The dvr support model：
Unicom：huawei E173,zhongxing MF100
Telecom:huawei EC150.huawei EC156.zhongxing MF583
“3G DIAL” have two modes with automatic and manual dialing, the operation follows as below.
1. Automatic Dialing
Select the Automatic Dialing in the interface of the following picture, fill the right information according to the operator where the 3G card belongs to and the 3G
referred guide, It includes IPS names, AP, dial-telephone, ID and password, the interface shows as the other following picture (some IPS once be chosen, the other
relative information has been already done, so you needn’t fill any more, click “SAVE” directly). Then click “Save” directl y. After having detected the 3G signal when
DVR start, the system will dial up automatically.
2. Manual Dialing
In the interface of following picture, users would fill the right information in the menu bar as same as
Automatic dialing and click “SAVE”. Then cli ck “Dial-up” after saving successfully (The referred information would be saved still after the DVR restart, but you
should click “Dial-up” again).
In these two modes, if the dial-up want success, first you should make sure that the 3G card is available. Since the 3G signal has been existed, the related menu
bar will show the correct IP address; if failed, system will popup a window to show the wrong information.
(3)DDNS Setup
【DDNS Service】Dynamic DNS provider website, Via DDNS server, it compatible with, DYNDNS.ORG
Page 21
20
【DDNS Domain】Dynamic domain name, soft keyboard and hard keyboard can be input.
【DDNS Account】Login domain name service provider website user name
【DDNS Password】Login domain name service provider website password
Tip: through the dynamic DNS server. Support dynamic DNS.
(4)Email
【SSL Protocol】Sending E-mail in use safety network connection
【Test Email】Send an email to the recipient mailbox test
【Email Address】The recipient's email address. Users can input two different email address.
【Send Email】The sender email address .
【SMTP Server】Send mailbox mail server
【Email Account】The sender email address the corresponding account
【Email Password】The sender email address of the corresponding email password
According to the customer request can be checked 【Video Setup 】and 【 • Motion Detection 】 sending emails. Two can also choose.
Note: your sender email must support SMTP.
(5)Access Control
【List Rule】According to the requirement to choose: don't use, allow access, refused to visit.
【Starting IP】Display IP address started section
【Ending IP】Display IP address end segments
【Add】On the basis of the need for added
【Delete】According to the need to delete
Page 22
21
4.4 System Setup
(1)Time
【System Language】Used in a remote remote device control more hard disk video recorder occasions, only in remote controls address and hard disk video recorder
Numbers identical to remote operation.
【Device Number】According to the requirement to select the time zones, has twenty six time zone for user Settings.
【Time Zone】Select the format the date is displayed in including date, sun and moon June 21 years in three formats.
【Date Mode】To choose time display modes include 24-hour system and 12 hours to make
【System Date】The current system date
【System Time】The current system time
【Daylight-saving mode】According to the requirement to choose
【Set Time】Confirm modification system of time
(2)HDD Management
【Disk Full】When video disk full system how to deal with, "said system will be automatic coverage the earliest video files continue covering video," stop video "says
system to stop the current video.
【File Time】Says automatic generation video files interval, the set range 5-120 minutes.
【Recording Bit-rate】Said the total rate of current coding
【Recording Time】Said the storage devices systems installed in accordance with the current bitrate can store video of time.
Display the current hard disk attributes: types, hard disk, usable capacity total capacity. Click [formatting ], all storage file will be lost.
Tip: to format the hard disk before please stop system current all those videos.
(3)User Management
Page 23
22
【User】Characters in length up to 8 bytes, ignore trailing Spaces. Can be letters, Numbers, and other symbols. The user has the largest number of eight, user name
may not be repeated.
【User Rights】According to the requirements set of functions need checked
【Add User】Input need to add user, and input the account password and passwords. According to save button to add user.
【Delete User】Select the users need to delete, and click on the "yes" button to remove users
【Edit User】Choose need to modify user, and in user permissions bar needed under the function of check. According to the save button modified users.
【Edit Password】Select the account, input to modify current user password, and enter the account password and confirmation password new. According to the save
button for password changing. The password can be set to 0 ~ 8 bits
(4)Alarm Setup
【Alarm Input】Choose corresponding alarm channel, "all" setup all channel said.
【Input Type】Alarm input to often open/closed type choice (voltage output style)
【Clear Alarm】Stop the current alarm video and alarm output, but not removal, can again trigger alarm.
【PTZ Relate】When will the linkage happened alarm yuntai control
【Trigger Recording】When will trigger happened alarm selected channel video.
【Alarm Output】When will the linkage happened alarm corresponding alarm output
(5)Output Management
Page 24
23
【Buzzer Output】In the chosen time intervals have alarm input will start buzzer output.
【Send Email】In the chosen time intervals have alarm input which will send relevant information, such as the alarm events, paparazzi pictures, equipment name,
device ID, etc sent to user specifies the mailbox.
【Alarm Output】In the chosen time intervals have alarm input will start alarm output
(6)Margin Adjust
By the function, you can adjust the distance between the display device and the picture edge.
4.5 System Management
(1)System Upgrade
Show the system hardware versions, software version, release dates. Click [software upgrade 】, the system began to automatically detect and upgrade file.
Note: equipment currently support upgrades: local USB mode, IE mode, the client software.
USB mode: former ensure USB device to connect upgrade normal, as upgrade program has copy USB devices in the root directory. According to the
interface can upgrade operation hints.
Page 25
24
Upgrade was successful, and the screen appears to restart operating hints. Equipment reboot after system that will enable the new software.
(2)Log Search
【Date Search】Can search according to date
【Log Type】Optional: all, operation log, set diaries, alarm log, error log
Note: according to the left, right arrow can move forward and content.
(3)Default
Restoring default can restore selected according to need. The system restore to the default configuration state out, can according to the menu options choose to
restore the corresponding Settings.
Tip: menu color, language, time date format, video format, IP address, the user account, etc will not be restored.
(4)Exception Handling
Page 26
25
【Exception Type】Choose abnormalities: hard disk full, hard disk errors, network connection.
【Buzzer】When abnormality, choose whether to allow the buzzer hints.
Chapter Five IE Preview
5.1 logging on interface
To input the IP address
Page 27
26
Pretermission IP address is 192.168.0.20
5.2 System Settings
Point , As the picture ,You can set up language directory,After all to save you set.
Page 28
27
Page 29
28
5.3 Status control
In state control you can set reboot server, close server , remote to go up
Remote upgrade: let PC file load in the system
Log: to inquire sometime the server’s action
Page 30
29
Page 31
30
Chapter Six Asee series phone software for use
6.1 Asee
This module has mainly instructions on the installation and usage in Android, Blackberry, iPhone mobile phone.
1) The acquisition of client software:
The client software can be got from the CD material equipped with CD , then choose English and select the options supporting tools, finally choose the mobile phone
monitoring or obtained from technical support. Each type of corresponding client software as follows.
1. Asee.apk: The smart phone monitoring client of Android operating system
2. ASee.cod & ASee.alx: The smart phone monitoring client of BlackBerry operating system
3. ASee.sisx: The smart phone monitoring client of Symbian operating system
Notes：
be directly searched for ASee+ in the appstore and installed online.
2) The main functions of the program which is straight even version of current mobile phone monitoring are shown as follows:
1. Browsing real-time video function. In addition to BlackBerry, it can support four pictures at the same time preview.
2. PTZ control function (the controlled ball machine is in front).
3) The instructions of three platforms is shown as follows.
1. Android
2. Blackberry
3. iPhone
4.Symbian
6.1.1 Instructions of Android
6.1.1.1 Essential condition
1) Support the version 1.5 or above of Android system.
2) Support DVR platform versions:
v1.0.1.8 and higher.
v8.33 and higher.
6.1.1.2 Installation and operation instructions
1）Installation
Support two installation modes and the user can choose one way for installation.
1. Install online
Search ASee+ on google market and install online. As the below image shows:
Page 32
31
2. Install offline
Copy the Asee.apk installation package to Android phone through cable. In the specified directory find out the corresponding .apk, click the application installation (If
there is not installed apk installer in the mobilke phone, the user needs to download an apk installation software so that it can identify the apk package), and there will
be program icons after finishing installing. As the above image shows.
3）Click the program icon <Asee+>，the first screen after running is shown in the below image.
The functions of buttons show as follows:
Table 1-1
Function keys
Definition
Function specification
Play
When the program connects with device, play video
Capture
Capture the current screen(the default save path: the default pictures
directory of mobile)
Settings
Set some information of the device, such as IP address, dynamic domain
name, port, username, password and device alias information.
About
Some device information of the software
Previous group
It can show the previous channels group.
Page 33
32
Next group
It can show the next channels group.
Select channel
Choose one video channel of the device. And cooperate with "next
group" can switch the 8 or 16 channels.
PTZ control
PTZ direction control including up, down, left and right.
Zoom
Zoom in/out control of PTZ.
Focal length
Focal length adjustment of PTZ.
Aperture
Aperture control of PTZ.
4）If it is first running or need to change the parameters, please click the <settings> button and enter the <Device List> page, as shown in the below image.
In <device list>interface, click <Add> button and enter <settings> interface, as shown in the above image
Notes：
<DVR Title>：It is convenient to identify among multiple devices.
<Server>：The public IP address, dynamic domain name or LAN IP of DVR (The port should be mapping before using public IP and mobile phones need to
open wifi before using LAN IP).
<Port>：The mobile port set in DVR（default parameter is 8888）.
：The username permitted to login the DVR（default username is ‘admin’）.
<Password>：The password of the user (default password is empty).
<Max Channel>: The actual channel numbers of DVR.
5）After finishing, click <OK>and enter the Device List page. As shown in the below image
Page 34
33
Notes：
<Back>：Back to the screen of previewing image.
<Channel List>：It shows the corresponding DVR and the default channel list, the user can arbitrarily choose a channel to preview image.
<Information Edit>：Click this button and enter the “Settings” interface, you can editor delete the device information, as shown in the above image
6）Complete settings, choose channel to preview, and the preview function include two modes: common mode and full screen mode.
1. Common mode is shown in the below image
2. Full screen mode is that when mobile phone lay down horizontally it will automatically switch to full screen mode, as shown in the above image
7）Channel switch function
Select some channels in the Device List interface, the program will automatically switch to the Preview Interface and open the corresponding channel preview in
Preview Interface. Program displays the default 1 ~ 4 channels, if the user clicks the channel button of Next Group in the Preview Interface, the channels
group will switch to 5 ~ 8, 8 ~ 12, 12~16 and circulation switch. As shown in the below image
Page 35
34
6.1.2 Instructions of Blackberry
6.1.2.1 Essential condition
1) Support the version 4.6 or above of Blackberry system, and mobile phone screen resolution is 480*360 and 480*320. Support 8900, 9000, 9700, 9630, 9900 of
Blackberry.
2) Support DVR platform versions:
Hisilicon v1.0.1.8 and higher.
GRain v8.33 and higher§2.2 Installation and operation instructions
6.1.2.2 installation
1）Install ASee. cod and ASee. jdp installation package into Blackberry handset through the desktop manager, as shown in the below image.
2）Click the options on mobile phone desktop and enter the interface of the above image.
3) <Asee> permission settings
a. Click <application program> to find out <Asee>；
b. Click the icon of <Asee> and enter the permission settings.
c. Click <edit permissions>, set all permissions <permit>.
Note：Some permissions can not be set <permit>( the gray options mean cannot change this option), and click “save”.
4）Enter the initial interface
Click the program icon <Asee>, after running procedure there will be an welcome page, then enter the initial interface, as shown in the below image.
Page 36
35
Notes：
<Title>：It is convenient to distinguish between multiple devices.
：The public IP address, dynamic domain name or LAN IP of DVR (The port should be mapping before using public IP and mobile phones need to
open wifi before using LAN IP).
<Port>：The mobile port set in DVR（default parameter is 8888）.
<Channel total>：The actual channel number of DVR.
<User ID>：The username owens view permissions of mobile phone（default username is admin）.
<Password>：The mobile phone port of DVR (default password is empty).
<Network type>：Choose the network type that you need.
The corresponding functions of buttons show as follows:
Function keys
Definition
Function specification
login
Enter the playing interface, and the program will connect with device and
begin to play video
exit
Exit the program
Device list
Enter the device list interface.
5) Click <login>, play the main interface, as shown in the below image.
The corresponding functions of buttons in <Main interface> show as follows:
Function keys
Definition
Function specification
Play
When the program connects with device, play video
Full screen
Play full screen.
Page 37
36
Capture
Capture the current image (the default save path: the default pictures
directory of mobile)
About
Some device information of the software.
Next group
It can select the next channels group (1-4、4-8、8-16) or PTZ control.
Select channel
Choose one video channel of the broadcasting device and select any
one of 8 channels.
Up control of PTZ
The up direction control of PTZ.
Down control of PTZ
The down direction control of PTZ.
Left control of PTZ
The left direction control of PTZ
Right control of PTZ
The right direction control of PTZ
Zoom in
The zoom in control of PTZ.
Zoom out
The zoom out control of PTZ.
Focal length +
Amplify the focal length of PTZ.
Focal length -
Lessen the focal length of PTZ.
Aperture +
Amplify the aperture of PTZ.
Aperture -
Lessen the aperture of PTZ.
6) Exit the application program
Click the button <Exit> and exit the program, as the below image shows.
7) Edit the <Device List> interface
1. Click the <Device List>and enter <Device List> interface, as shown in the above image.
2. Click the <menu> button and enter the <device edit> interface, as the below image shows.
Page 38
37
The corresponding functions of buttons in < device edit> interface show as follows:
Menu definition
Function specification
Set to real-time preview
When the program connects with device, play video.
New Device
Create a new record.
Edit
Edit record.
Delete
Delete the selected record.
Delete All Records
Delete all records.
Shutdown
Shut down the program.
6.1.3 Instructions of iPhone
6.1.3.1 Essential condition
1) Support the version iOS 3.0 or above, and mobile phones includes iPhone, iPod, touch etc.
2) Support DVR platform versions:
v1.0.1.8 and higher.
v8.33 and higher§2.2 Installation and operation instructions
6.1.3.2 Installation and operation instructions
1）Run the App Store program of iPhone
Switch to the search tag page, and input Asee + in the search box to find the application installation package, then click <install> .After finishing installation, there will
be Asee + program icon on the mobile phone desktop, as shown in the below image.
2）Click the program icon Asee+ and the initial interface after running procedure is shown in the above image.
The corresponding functions of buttons show as follows:
Page 39
38
Function keys
Definition
Function specification
Stop
playing
When the program disconnects with device, stop playing the video.
Capture
Capture the current image (the default save path: the default pictures
directory of mobile).
Settings
Set some information of the device, such as IP address, dynamic domain
name, port, username, password and device alias information.
Channels group switch
It can switch to next channels group.
About
Some device information of the software.
Select channel
Choose one channel video of the broadcasting equipment. And cooperate
with "next group " can achieve the switch of 8ch and 16ch.
PTZ control
PTZ direction control including up, down, left and right.
Zoom
Zoom in/out control of PTZ.
Focal length
Focal length adjustment of PTZ.
Aperture
Aperture control of PTZ.
3）Initial usage of need to change the parameter
1.Please click the settings button and enter the device manage interface, as shown in the below image.
Page 40
39
2.Then select Add button and enter device add interface, as shown in the above image.
Notes:
<Device Name>：It is convenient to distinguish between multiple devices.
<Address>：The public IP address, dynamic domain name or LAN IP of DVR (The port should be mapped before using public IP and mobile phones need to
open wifi before using LAN IP).
<Port>：The mobile phone port set in DVR（default parameter is 8888）.
<User ID>：The username permitted to login the DVR（default username is ‘admin’）.
<Password>：The password of the user (default password is empty).
<Max Channel>：The actual channel number of DVR.
3.After finishing, click <OK>, enter <Device Manage> interface. As shown in the below image.
4.In the <Device Manage> page, click the <back> button, enter the <add channel> interface, then click the <+> button , as shown in the above image.
5.Click the <+> button , and switch automatically to <Device List>, as shown in the below image.
6.Click the button to view all channel numbers, as shown in the above image.
7.Double click any channel, then switch to the <channel preview> interface to preview channels, it can support four channels previewing at the same time, as shown
in the below image.
Page 41
40
8.Click the <settings> button enter the <Device Manage> interface, as shown in the above image. The user can edit, modify and delete device information by
clicking the corresponding icon or slipping the item.
（1）Click the <edit> button enter <parameter modifying> interface, as shown in the below image.
（2）Slide rightly the <edit> button to delete the information. As shown in the above image.
4）Video display mode
There are two modes: common mode and full screen mode
Switch: when the mobile phone lay down horizontally it will automatically display full screen.
Page 42
41
common mode full screen mode
5）Channel switch function
Select some channels in the Device list interface, the program will automatically switch to the Preview Interface and open the corresponding channel preview in
Preview Interface. Program displays the default 1 ~ 4 channels, when elected the channel <Channel switch> button in the <preview interface>, the channels
group will switch to 5 ~ 8, 8 ~ 12, 12~16 and circulation switch. As shown in the below image.
6.1.4 Instructions of Symbian
6.1.4.1 Essential condition
1) Support the version OS S60 or above of Symbian system.
2) Support DVR platform versions:
Hisilicon v1.0.1.20 and higher.
GRain v8.42 and higher.
6.1.4.2 Installation and operation instructions
Installation
Support two installation modes and the user can choose one way for installation.
1.Install online
Search ASee on google market and install online.
2.Install offline
Copy the Asee.sisx installation package to Symbian phone through cable. In the specified directory find out the corresponding .sisx, click the application installation (If
there is not installed apk installer in the mobile phone, the user needs to download an apk installation software so that it can identify the sisx package), and there will
be program icons after finishing installing. As the following figure shows.
2）Click the program icon <Asee>，the first screen after running is shown in the following figure
Page 43
42
click PTZ show as the following figure
The functions of buttons show as follows:
Function keys
Definition
Function specification
Play/pause
When the program connects with device, play video
capture
Capture the current screen(the default save path: the default pictures directory
of mobile)
settings
Set some information of the device, such as IP address, dynamic domain name,
port, username, password and device alias information.
Full screen
For this channel full screen.
pervious/next
Pervious to the former channel,next to the latter channel
exit
quit current software
Select channel
Choose one video channel of the device. And cooperate with "next group" can
switch the 8 or 16 channels.
Ptz
PTZ
Page 44
43
PTZ control
PTZ direction control including up, down, left and right.
zoom
Zoom in/out control of PTZ.
Focal length
Focal length adjustment of PTZ.
Aperture
Aperture control of PTZ.
3）If it is first running or need to change the parameters, please click the <settings> button and enter the <Device List> page, as shown in the following
figure:
Notes:
1)<server address>：The public IP address, dynamic domain name or LAN IP of DVR (The port should be mapped before using public IP and mobile phones need to
open wifi before using LAN IP).
2)<port>：The mobile phone port set in DVR（default parameter is 8888）.
3)<uer ID>：The username permitted to login the DVR（default username i s ‘admin’）.
4)<password>：The password of the user (default password is empty).
5)<alias>：the record’s name
After entering the above information, identify and select play.
Page 45
44
Chapter Seven Instructions of imac
7.1 Essential condition
1)Support the version OS X 10.6.3 or above of imac system.
2)Support DVR platform versions:
Hisilicon v1.0.1.20 and higher.
GRain v8.42 and higher.
7.2 Installation and operation instructions
One method:
To unzipped the Asee.app in windows xp os, copy it to the mac machine.and then you will find the icon.
The other method:
Download from App Store,Search for Asee ,find the corresponding program installation package (Asee.apk installation package), install online.After finishing
installation, as the following figure shows:
7.2.1 operation instructions
After installing,click Asee icon to work.
Log on the main menu interface,as the following figure shows
main menu interface
After loading，enter default main menu interface,buttons instruction as show below:
buttons instruction
Button icon
corresponding definition
function introduction
single picture
Single picture shows video channel
4 pictures
4pictures show video channels
disconnect
disconnect single picture of connection
disconnect
disconnect all pictures of connection
Page 46
45
Capture
Capture the current image (the default save path: the default
pictures directory of mobile).
full screen
Picture full-screen
add
add device
delete
Delete device
modify
Modify device
Switch pictures on Imac platform，click view->scream mode on the top of the screen to switch pictures from 1/4/9/16，as the following figure shows:
picture switch
First login ,preview interface is empty, need to set parameters and add device,after adding device, can preview, configuration, modify or delete equipment information
ect.
click “add ”,pop-up a message box as shown in the follong figure:
add device
The current message box shows the need to enter five information: device name、IP address、port、user ID and password.
Device name:the name of monitor device,help you distinguish between multiple devices
IP address：The public IP address or dynamic domain name of DVR(here the address must be internet address)
port：The mobile phone port set in DVR，default parameter is 8888
User name：default username usually to be ‘admin’,can be set according to the DVR .
Password：:admin user’s default password is empty，can be set according to the DVR.
Page 47
46
add device
after inputting above information，click“ok”.enter main menu interface,click a picture,after appearing green frame(as shown window 1 in picture below),click a
channel on right channel column(such as channel 1 ),connect play，as shown in the following figure
connection play interface
If there is error device information above,click to modify or click ,add the device again.
Note：Asee on Imac platform can only add one device,and there is no PTZ control function.
Page 48
47
Chapter Eight FAQ (Frequently Asked Questions)
01：Why the DVR did not run after connect the power supply?
①Please check the power switch turn on or off at the rear panel of DVR.
②Please check if the turn on DVR operation correct or not?
③If you select the adaptor +12V, 5A or above? (8ch 5A, 16ch 220V 200W)
02：Still stop over on the boot-strap frame?
Physical damaged in hard disk drive
Boot manager abnormal.
03：Why does appear the boot running too slow?
①There are too much capacity data in hard disk drive, the system will automatic search the data when the system boot up, caused the boot
running slow.
②The hard disk drive error will cause the system research the data repeatedly, caused the boot running slow.
04：Why does the system reboot repeatedly?
①Check the hard disk drive, if there is not the FAT32 formatted in it or the problem in it and caused the DVR reboot;
②Please check the power supply of DVR, if you installed a lot of hard disk drive, it may be reboot repeatedly underpower;
③Please pull up the network cable, then to check the DVR can work normally or not, being the catastrophe failure in network,
it will cause the DVR reboot repeatedly;
05：Why does the system halted of DVR during the playback and search the video file information in progress?
Please check if you install the hard disk drive or if the drive is ok or not? Please replace the good one for it soon;
If the ambient temperature on the high side or not?
Is there any heaven current installation surrounding and external video device, heavy current surging video cable, caused the DVR can not work
properly and the system halted;
06：Firmware upgrade failure?
U drive is not good compatible with the DVR, cause the DVR can not detected it, suggested to try one or two more different kind of U drive in the
market;
USB interface is not good;
The voltage hunting fearfulness during the system firmware upgrade in progress;
07：Why the display color is black and white in TV and VGA monitor?
Check the video system is it matching the video input, DVR, TV or VGA monitor, if there is not on all fours, please set the video system mode in auto
automatic recognition;
08：Why does nothing display on the TV or VGA monitor?
一、 ①please make sure if the power supply of TV or VGA monitor turn on or not; if the illumination located in the lowest status?
二、 ②if the video connected with TV or VGA monitor properly? Check if there is any video signal input? And make sure the line faulty or not?
09：Why does the video like water wave, to appear obstruction distortion?
①if there is short circuit, open circuit or insufficient solder and connection failure of video cable?
②If the video cable obstruction by high voltage interference, please separate the video and high voltage in linkup cabling, at the meantime, please
select the better quality, shield video cable for the project;
③In the whole system, only select the central point to grounding, please do not multi port to grounding, then, cause the common mode obstruction,
please connect the screw in DVR rear panel to grounding;
④Check if there is the become old problem in the camera or TV monitor and cable?
10：Why do the color of live video and record video data distortion?
1、 ①Make sure the input and output video parameter of main menu setting correct;
2、 ②Make sure the connection is correct;
11：Why does the video skew became deformed, color cast?
①Make sure the VGA cable and DVR be connected with grounding properly;
② The DVR working atmosphere temperature high, or no good in radiating, cause the VGA chipset working exceptional, or the mention circuit
parameter is abnormal;
12：Why does the record video playback in mosaic under local DVR?
①The recording parameter setting is too low cause the record video quality overall down, sometime appears to mosaic;
②The record video file locates where there is a bad sector in a hard disk drive, it will cause the mosaic raising;
Enjoy the use of your Conceptronic CCTV!
Loading...