Comnet CNFE8FX4TX4US, CNFE8FX8US, CNFE8TX8US Specsheet
10/100 Mbps Ethernet 8 Port Unmanaged Switches
4 × Electrical + 4 × SFP Optical; 8 × Electrical; 8 × SFP Optical
CNFE8US Series
INCLUDED
The ComNet™ CNFE8US Series Ethernet 8 port unmanaged switches are designed
to transmit and receive 10/100 Mbps data over optical fiber through user selectable
SFP options or 10/100 Mbps data over CAT5e/6 electrical cable. Eight independent
10/100 Mbps channels are integrated in a single package. The CNFE8FX4TX4US
and CNFE8FX8US require the ordering of sold-separately interchangeable SFP*
modules for fiber type, distance and connectors. The CNFE8US Series models are
environmentally hardened to operate in demanding environments. LED indicators
are provided for confirming equipment operating status. Packaged in the exclusive
ComNet ComFit housing, these units may be either wall or rack-mounted, or may be
DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate.
HARDENED
8FLEXIBILIT Y
FEATURES
› 10/100 Mbps Ethernet
• 10/100 BASE-T/TX electrical port
• 100 BASE-FX optical port
› Electrical ports support Auto-Negotiation for 10 Mbps
or 100 Mbps, full duplex or half duplex data.
› Optical port supports 100 Mbps full duplex data
› Automatic MDI/MDI-X crossover
› Designed to meet full compliance with the environmental
requirements (ambient operating temperature, mechanical
shock, vibration, humidity with condensation, high-line/lowline voltage conditions and transient voltage protection) of
NEMA TS-1/TS-2 and the Caltrans Specification for Traffic
Signal Control Equipment.
› Uses interchangeable SFP for fiber type, distance
and connector (Ordered separately)
› Voltage transient protection on all power and signal input/
output lines provides protection from power surges and other
voltage transient events.
› No in-field optical adjustments required
› Power, Activity and Port status LED indicators
› Hot-swappable rack modules
› Interchangeable between stand-alone or rack mount use –
ComFit
› IEEE 802.3 compliant
› Lifetime Warranty
APPLICATIONS
› 10/100 Mbps Ethernet
› High Speed Computer Links
* Small Form-Factor Pluggable Module. Sold separately.
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
CNFE8US Series
SPECIFICATIONS
10/100 Mbps Ethernet 8 Port Unmanaged Switches
4 × Electrical + 4 × SFP Optical; 8 × Electrical; 8 × SFP Optical
Data
Data Inter face Etherne t
Data Rate 10/100 Mbps
IEEE 802.3 Compliant
Full Duplex or Half Duplex Electrical Ports/Full
Duplex Optical Port
Fibers¹ (CNFE8FX4TX4US & CNFE8FX8US) Requires
selection of sold-separately SFP modules. See
ComNet data sheet for number and description of
SFP modules
Cable CAT5E/6 (CNFE8FX4TX4US & CNFE8TX8US)
Connectors
Power Terminal Block
Data RJ45
Optical SFP Dependent
Indicating LEDs - Optical Link/Data Activity
- Electrical Link/Data Activity
- Power
ORDERING INFORMATION
Power
Operating Voltage Range 9 to 24 VDC
Power Consumption 700 mA
Electrical & Mechanical
Number of Rack Slots 2
Current Protection Automatic Resettable Solid-State Current Limiters
Circuit Board Meets IPC Standard
Size 6.1 × 5.3 × 2.2 in (15.5 × 13.5 × 5.6 cm)
Shipping Weight <2 lbs./0.9 kg
Environmental
MTBF >100,000 hours
Operating Temp -40˚ C to +75˚ C
Storage Temp -40˚ C to +85˚ C
Relative Humidity 0% to 95% (non-condensing)²
[1] Multimode fiber needs to meet or exceed fiber standard ITU-T G.651.
Single mode fiber needs to meet or exceed fiber standard ITU-T G.652.
Part Number Description
CNFE8FX4TX4US 8 Port 10/100 Mbps Ethernet Unmanaged Switch with 4 TX RJ45 Ports, 4 FX SFP Ports
CNFE8FX8US 8 Port 100 Mbps Ethernet Unmanaged Switch with 8 FX SFP Ports
CNFE8TX8US 8 Port 10/100 Mbps Ethernet Unmanaged Switch with 8 TX RJ45 Ports
Included Accessories DC Plug-in Power Supply, 90-264 VAC, 50–60 Hz
Options [2] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
Small Form-Factor Pluggable Modules (See SFP Data sheet)
Note: This product requires a fiber installation with a minimum 30 dB connector return loss. The use of Super Polish Connectors is recommended.
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J. In a continuing effort to
improve and advance technology, product specifications are subject to change without notice.
DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1)
3 CORPORATE DRIVE
8 TURNBERRY PARK ROAD
© 2013 Communic ation Netwo rks. All Right s Reserv ed. “ComNet ” and the “ComNe t Logo” are regi stered tra demarks of Com munication Ne tworks.
|
DANBURY, CONNECTICUT 06810
|
GILDERSOME
|
MORLEY
|
|
USA
T: 203.796.5300
|
LEEDS, UK LS27 7LE
|
F: 203.796.5303
|
T: +44 (0)113 307 6400
|
|
F: +44 (0)113 253 7462
TECH SUPPORT: 1.888.678.9427
|
INFO-EUROPE@COMNET.NET
|
INFO@COMNET.NET
20 Nov 2013
Loading...