Comnet CNFE6+2USPOE-M, CNFE6+2USPOE-S Specsheet
10/100TX Drop/Insert/Repeat 6TX/2FX
Ethernet Self-Managed Switch with PoE
CNFE6+2USPOE
HARDENED
The ComNet™ CNFE6+2USPOE provides 8 Ethernet ports operating at 10/100Mbps
and is designed to combine six electrical ports into a second optical port that
forwards this data to the next CNFE6+2USPOE. The optical por ts are designed to
forward the data from the six electrical ports to the next switch, to a PC, or another
Ethernet connection. In addition, the electrical ports can supply up to thirty (30) watts
of power (“Power Over Ethernet”) to remote Ethernet devices. This product uses ST
optical connections and can be supplied to operate over Singlemode or Multimode
optical fiber. There is no programming required to use this product. The sixth (6th)
electrical port can be used to monitor the data flow from the optical port to permit
“local” observation and diagnostics of the equipment.
6+2
30W
FEATURES
› No Programming Required
› 10/100 Mbps Ethernet
• 10/100 BASE-T/TX electrical port
• 100 BASE-FX optical port
› Electrical ports support Auto-Negotiation for 10 Mbps
or 100 Mbps, full duplex or half duplex data.
› Optical port supports 100 Mbps full duplex data
› IEEE802.3af Class 1 – 3 Power over Ethernet (PoE) 30W
› Automatic MDI/MDI-X crossover
› Designed to meet full compliance with the environmental
requirements (ambient operating temperature, mechanical
shock, vibration, humidity with condensation, high-line/lowline voltage conditions and transient voltage protection) of
NEMA TS-1/TS-2 and the Caltrans Specification for Traffic
Signal Control Equipment.
› Voltage transient protection on all power and signal input/
output lines provides unconditional protection from power
surges and other voltage transient events.
› No in-field optical adjustments required
› Power, Activity and Port PoE status LED indicators
› Hot-swappable rack modules
› The ComNet CNFE6+2USPOE may be either wall mounted,
rack mounted (“ComFit” packaging) or DIN-rail mounted
with the use of the ComNet DINBKT1 adapter.
› IEEE 802.3 compliant
› Lifetime Warranty
APPLICATIONS
› 10/100 Mbps Ethernet
› High Speed Computer Links
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
CNFE6+2USPOE
SPECIFICATIONS
10/100TX Drop/Insert/Repeat 6TX/2FX
Ethernet Self-Managed Switch with PoE
Data
Data Interface Ethernet
Data Rate 10/100 Mbps
IEEE 802.3 Compliant
Full Duplex or Half Duplex Electrical Ports/Full
Duplex Optical Port
Electrical 30 W (max)
Fibers SC or ST, MM or SM
Connectors
Power Terminal Block
Data RJ45
POE Pin Assignment RJ45 port support s IEEE802.3af
End-point Positive (VCC+): RJ45 pin 1, 2
Negative (VCC-): RJ45 pin 3, 6
Electrical & Mechanical
Surface Mount Wall or Flat Surface Screw Attachment
Number of Rack Slots 2
Current Protection Automatic Resettable Solid-State Current Limiters
Circuit Board Meets IPC Standard
Size (in./cm) (L×W×H) 6.1 × 5.3 × 2.2 in. (15.5 × 13.5 × 5.6 cm)
Shipping Weight <2 lbs./0.9 kg
Environmental
MTBF >100,000 hours
Operating Temp -40˚ C to +75˚ C
Storage Temp -40˚ C to +85˚ C
Relative Humidity 0% to 95% (non-condensing)
1
LED Indicators - Optical Link/Data Activity
- Electrical Link/Data Activity
- Power - PoE
Power
Operating Voltage 48VDC PoE, 12–48VDC non-PoE
Current Draw 5A, with PoE, 1A w/out PoE
ORDERING INFORMATION
Part Number Description Maximum Distance
CNFE6+2USPOE-S 8 Port 10/100 Mbps Ethernet Self-managed Switch 2FX Single mode, 6TX (PoE)
CNFE6+2USPOE-M 8 Port 10/100 Mbps Ethernet Self-managed Switch 2FX Multimode, 6TX (PoE) 3 km (1.8 mi)
Options PS48VDC-5ADIN Recommended Power Supply for PoE Applications (Not Included)
PS12DC-3A-US Recommended Power Supply for non-PoE Applications (Not Included)
[1] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1)
20 km (12.4 mi)
‡
NOTE: This product requires a fiber installation with a minimum 30 dB connector return loss. The use of Super Polish Connectors is recommended.
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J. In a continuing effort to improve and advance technology, product
specifications are subject to change without notice.
TYPICAL APPLICATION
CNFE6+2USPOE CNFE6+2USPOE
Monitor
PC
Fiber
1
2
3
4
5
6
... ...
... ...
10/100TX
PoE
... ...
7
8
Ethernet
1
2
3
4
5
6
7
8
48VDC in
... ...
PC
3 CORPORATE DRIVE
8 TURNBERRY PARK ROAD
© 2013 Communic ation Netwo rks. All Righ ts Reserv ed. “ComNet ” and the “ComNe t Logo” are regi stered tra demarks of Co mmunication Ne tworks.
|
DANBURY, CONNECTICUT 06810
|
GILDERSOME
5 61 1
|
MORLEY
48VDC in
|
|
USA
T: 203.796.5300
|
LEEDS, UK LS27 7LE
|
T: +44 (0)113 307 6400
FiberFiber
PoE
...
INSERTINSERT
|
F: 203.796.5303
10/100TX
Ethernet
|
TECH SUPPORT: 1.888.678.9427
|
F: +44 (0)113 253 7462
|
INFO@COMNET.NET
|
INFO-EUROPE@COMNET.NET
10 Jul 2013
Loading...