Comelit MT VIP SYSTEM User Manual

TECHNICAL

MANUAL

The complete, simple and versatile

Internet Protocol System

Installer manual

www.comelitgroup.com

Fonts are (c) Bitstream (see below). DejaVu changes are in public domain. Glyphs imported from Arev fonts are (c) Tavmjong Bah (see below) Bitstream Vera Fonts Copyright

Permission is hereby granted, free of charge, to any person obtaining a copy of the fonts accompanying this license ("Fonts") and associated documentation ﬁles ("Font Software"), to reproduce and distribute the Font Software, including without limitation the rights to use, copy, merge, publish, distribute, and/or sell copies of the Font Software, and to permit persons to whom the Font Software is furnished to do so, subject to the following conditions:

The above copyright and trademark notices and this permission notice shall be included in all copies of one or more of the Font Software typefaces.

The Font Software may be modiﬁed, altered, or added to, and in particular the designs of glyphs or characters in the Fonts may be modiﬁed and additional glyphs or characters may be added to the Fonts, only if the fonts are renamed to names not containing either the words “Bitstream” or the word “Vera”.

This License becomes null and void to the extent applicable to Fonts or Font Software that has been modiﬁed and is distributed under the "Bitstream Vera" names.

The Font Software may be sold as part of a larger software package but no copy of one or more of the Font Software typefaces may be sold by itself.

THE FONT SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF COPYRIGHT, PATENT, TRADEMARK, OR OTHER RIGHT. IN NO EVENT SHALL BITSTREAM OR THE GNOME FOUNDATION BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, INCLUDING ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF THE USE OR INABILITY TO USE THE FONT SOFTWARE OR FROM OTHER DEALINGS IN THE FONT SOFTWARE.

Except as contained in this notice, the names of Gnome, the Gnome Foundation, and Bitstream Inc., shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Font Software without prior written authorization from the Gnome Foundation or Bitstream Inc., respectively. For further information, contact: fonts at gnome dot org.

Arev Fonts Copyright

Permission is hereby granted, free of charge, to any person obtaining a copy of the fonts accompanying this license ("Fonts") and associated documentation ﬁles (the "Font Software"), to reproduce and distribute the modiﬁcations to the Bitstream Vera Font Software, including without limitation the rights to use, copy, merge, publish, distribute, and/or sell copies of the Font Software, and to permit persons to whom the Font Software is furnished to do so, subject to the following conditions: is furnished to do so, subject to the following conditions:

The above copyright and trademark notices and this permission notice shall be included in all copies of one or more of the Font Software typefaces. The Font Software may be modiﬁed, altered, or added to, and in particular the designs of glyphs or characters in the Fonts may be modiﬁed and additional glyphs or characters may be added to the Fonts, only if the fonts are renamed to names not containing either the words "Tavmjong Bah" or the word "Arev".

This License becomes null and void to the extent applicable to Fonts or Font Software that has been modiﬁed and is distributed under the "Tavmjong Bah Arev" names.

The Font Software may be sold as part of a larger software package but no copy of one or more of the Font Software typefaces may be sold by itself.

THE FONT SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF COPYRIGHT, PATENT, TRADEMARK, OR OTHER RIGHT. IN NO EVENT SHALL TAVMJONG BAH BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, INCLUDING ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF THE USE OR INABILITY TO USE THE FONT SOFTWARE OR FROM OTHER DEALINGS IN THE FONT SOFTWARE.

Except as contained in this notice, the name of Tavmjong Bah shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Font Software without prior written authorization from Tavmjong Bah. For further information, contact: tavmjong @ free. fr.

Chapter 1: Introduction to the ViP system ............................................................................................................................................................... 4

What is the ViP system? ....................................................................................................................................................................................... 4

Main features ......................................................................................................................................................................................................... 4

General structure of a ViP system ....................................................................................................................................................................... 4

Chapter 2: Description of products and accessories ............................................................................................................................................. 5

Power supply unit art. 1441A ............................................................................................................................................................................... 5

Power supply unit art. 1441 .................................................................................................................................................................................. 5

Power supply unit art. 1395 .................................................................................................................................................................................. 6

Switch art. 1440 ..................................................................................................................................................................................................... 6

Repeater art. 1447 ................................................................................................................................................................................................. 7

POE power supply unit art. 1451 ......................................................................................................................................................................... 7

Planux bracket art. 6231. ...................................................................................................................................................................................... 8

Planux monitor art. 6202 ...................................................................................................................................................................................... 8

Maestro bracket art. 5931. .................................................................................................................................................................................... 9

Maestro monitor art. 5900 .................................................................................................................................................................................... 9

Easycom door-entry phone art. 6203 .................................................................................................................................................................. 10

ViP Manager software art. 1449 ........................................................................................................................................................................... 10

Powercom module for audio/video unit art. 3331/0-1-2 ..................................................................................................................................... 10

Powercom call button module art. 3337/3-4-6 .................................................................................................................................................... 11

Backlit module with actuator relay art. 3327 ...................................................................................................................................................... 11

Barcode Reader art. 1450 ..................................................................................................................................................................................... 11

Digital call module art. 3370 ................................................................................................................................................................................. 12

Audio / video unit art. 4662C ................................................................................................................................................................................ 12

Remote cameras module art. 1445 ...................................................................................................................................................................... 13

Chapter 3: System preparation and speciﬁcations ................................................................................................................................................. 14

Connection distances ........................................................................................................................................................................................... 14

Connection distances from power supply unit art. 1395 to external unit art. 3331 ........................................................................................... 14

Connection distances between external unit art. 3331 and Switch art. 1440 ................................................................................................... 14

Connection distances between 2 Switches art. 1440 ....................................................................................................................................... 14

Connection distances from Switch art. 1440 / Repeater art. 1447 to door-entry phones / door entry monitors ............................................... 15

Connection distances from Switch art. 1440 / Repeater art. 1447 to switchboard art. 1952 ............................................................................ 15

Expanding a system using repeater art. 1447 .................................................................................................................................................. 15

Guide to ﬁtting a UTP / STP RJ45 Direct network cable ................................................................................................................................... 16

Chapter 4: Mounting external units and internal units ........................................................................................................................................... 19

Mounting external unit art. 4662C ....................................................................................................................................................................... 19

Mounting digital directory art. 3370 .................................................................................................................................................................... 20

Mounting actuator module art. 3327 ................................................................................................................................................................... 20

Mounting Planux monitor art. 6202 with ﬂush-mounted box ............................................................................................................................ 21

Mounting Planux monitor art. 6202 with box art. 6120 ...................................................................................................................................... 22

Mounting Maestro monitor art. 5900 ................................................................................................................................................................... 23

Mounting Easycom door-entry phone art. 6203 ................................................................................................................................................. 23

Chapter 5: Installation programming ....................................................................................................................................................................... 24

Mac Address .......................................................................................................................................................................................................... 24

ViP code ................................................................................................................................................................................................................. 24

Reset procedure for external unit art. 4662C ..................................................................................................................................................... 24

Installing ViP Manager software art. 1449 .......................................................................................................................................................... 25

Detection of connected devices .......................................................................................................................................................................... 27

Key to connected devices .................................................................................................................................................................................... 28

Programming the ViP code for external unit art. 4662C .................................................................................................................................... 28

Programming buttons on external unit art. 4662C ............................................................................................................................................. 31

Manually programming buttons on external unit art. 4662C............................................................................................................................. 34

Programming additional button module art. 3337 ............................................................................................................................................. 35

Programming the ViP code for Planux monitor art. 6202 .................................................................................................................................. 39

Programming the ViP code for Easycom door-entry phone art. 6203.............................................................................................................. 42

Planux monitor installer settings ....................................................................................................................................................................... 47

Accessing the installer menu .............................................................................................................................................................................. 47

Programming the ViP code for main Planux monitors ...................................................................................................................................... 47

Programming the ViP code for secondary Planux monitors ............................................................................................................................ 48

Conﬁguring 1 - 2 or Self-ignition buttons ........................................................................................................................................................... 48

Conﬁguring key button ........................................................................................................................................................................................ 49

Conﬁguring the Privacy / Doctor button ............................................................................................................................................................. 50

Conﬁguring the intercom directory ..................................................................................................................................................................... 50

Conﬁguring the self-ignition directory ............................................................................................................................................................... 51

Set ringtone repetition .......................................................................................................................................................................................... 52

Set call times ......................................................................................................................................................................................................... 53

Set automatic answer ........................................................................................................................................................................................... 53

Chapter 6: Connection diagrams .............................................................................................................................................................................. 54

Connecting Powercom call button module art. 3337/3-4-6 ............................................................................................................................... 54

VIP/001 ................................................................................................................................................................................................................... 54

Connecting digital call module art. 3370 ............................................................................................................................................................ 55

VIP/002 ................................................................................................................................................................................................................... 55

Connecting backlit module with actuator relay art. 3327 .................................................................................................................................. 56

VIP/003 ................................................................................................................................................................................................................... 56

Connecting remote cameras module art. 1445 .................................................................................................................................................. 57

VIP/004 ................................................................................................................................................................................................................... 57

Connecting repeater module art. 1447 ................................................................................................................................................................ 58

VIP/005 ................................................................................................................................................................................................................... 58

Request to exit (RTE) button input variant ......................................................................................................................................................... 59

Planux ViP priority calls variant........................................................................................................................................................................... 59

VIP/RTE .................................................................................................................................................................................................................. 59

VIP/FMP.................................................................................................................................................................................................................. 59

Chapter 1: Introduction to the ViP system

What is the ViP system?

The ViP system is the new IP video entry phone system combining powerful performance with ease of installation. The ViP network, based on a connection via Ethernet cable, connects an inﬁnite number of users in simultaneous conversations and with no distance restrictions. It integrates a video entry phone system, burglar alarm, video surveillance, home automation and access control functions into a single system. The ViP System can be used to create either a dedicated, proprietary network or integrated into an existing LAN, creating a video entry phone system that runs in parallel with other existing systems.

Main features

The ViP System delivers optimal performance across an intelligible infrastructure, untangling the communication, control, security, automation and monitoring apparatus needed for access and building control.

• Multiple simultaneous audio-video conversations

• An unlimited number of users and devices can be plugged into the network

• No limits on the number of connected entrance panels, internal units, switchboards and cameras

• All network devices are connected to the network via RJ45 plug

• Simultaneous communication capabilities between all network users

• Memovideo function installed as standard on all monitors

• Interface management for lifts and additional oors

• Integrated access control and video surveillance options

• Alarms or panic messages can be sent to porter switchboards

• Audio and text messages between users and switchboards

• "Follow me" and data transfer to external applications (PC or telephone)

• Remote home automation management

General structure of a ViP system

Below is a synoptic diagram providing a general illustration as to how a ViP system can be laid out.

The optimal freedom offered by the ViP system means that networks can be created using cascade or branch connections, with no restrictions.

Chapter 2: Description of products and accessories

Power supply unit art. 1441A

Power supply unit art. 1441A, to power all accessories connected to the riser (not including external units).

1. Terminal blocks for connection.

Technical characteristics

-V

+V +V -V -V: Riser power supply terminals. L N: Alternating 230 Vac network terminals.

: Earth connection terminal.

2. Power supply LED.

3. Voltage selector switch 115 VAC - 230 VAC.

Input voltage 100 - 240 V AC (3 A)

Output voltage 48 V DC (2.5 A)

Powe r 120 W

Frequency 50/60 Hz

Temperature thresholds -30°C / +55°C

Dimensions 4 DIN modules / H: 12.5 cm W: 6.5 cm D: 10.7 cm

Power supply unit art. 1441

Power supply unit art. 1441, to power all accessories connected to the riser (not including external units).

1. Terminal blocks for connection: +V -V: Riser power supply terminals. L N: Alternating 230 Vac network terminals.

Technical characteristics

Input voltage 100 - 240 V AC (3 A)

Output voltage 56 V DC (1.8 A)

Powe r 100 W

Frequency 50/60 Hz

Temperature thresholds -30 +55

Dimensions 6 DIN modules / H: 9.3 cm W: 9.9 cm D: 5.3 cm

Power supply unit art. 1395

Power supply unit art. 1395, for powering external units.

230 V ~: Alternating 230 Vac network terminals.

2. 0 12~: Power supply output terminals.

Technical characteristics

Input voltage 207 - 257 V AC (3 A)

Output voltage 13.1 - 15.9 V DC (1.8 A)

Powe r 60 W

Frequency 50 Hz

Temperature thresholds -20 / +40°C

Dimensions 4 DIN modules / H: 9 cm W: 7.15 cm D: 6.2 cm

Switch art. 1440

The Ethernet Switch module art. 1440 performs two main functions:

• Directing data ViP system data packages.

• Provide a power supply for the extensions connected to it and to any switch/repeaters connected in cascade.

Description

Port status indicator LED.

1. Lit steadily: port in standby.

Flashing: data passing through the port. Off: port not connected.

2. 10 Mb extension Ethernet port. Used for the connection of distributors, such as repeaters, switches, internal units etc...

3. External power supply terminals. Connection of power supply unit art. 1441 or art. 1441A.

4. 100 Mb riser Ethernet por ts. Used for the connection of distributors, such as repeaters, switches, internal units etc...

Technical characteristics

Absorption Min. 0.7 W Max. 2.6 W

Power supply 36/57 Vdc 3A Max.

Temperature thresholds -30 / +55°C

N.B. For correct operation of the system protecting art. 1440, the riser must be connected with input on port IN1 and output on port IN2.

Dimensions 4 DIN modules / H: 6.2 cm W: 7.2 cm D: 9 cm

Repeater art. 1447

The repeater module art. 1447 is used to extend networks, making it possible to connect a ViP device at a greater distance than would be possible using a single section of point-to-point Ethernet and, if necessary, to connect two risers to each other:

Description

Ethernet In port.

2. Ethernet Out port.

3. JP1 Jumper: positive pole separation (+).

4. JP2 Jumper: negative pole separation (GND).

The two Ethernet ports are polarised as an IN input port and an OUT output port. In general, the repeater will receive power from the input port and supply power to the remote device (door-entry phone, switch, repeater) via the output port. This distinction was made to interrupt power supply propagation between the In port and the Out port by removing Jumpers JP1 and JP2, in order to separate - for example - the power supplies to two risers. The device even operates correctly if the output port is switched with the input port. In this

Technical characteristics

Absorption Min. 0.7 W Max. 2.6 W

Power supply 36/57 Vdc 3A Max.

Temperature thresholds -30 / +55°C

Dimensions 4 DIN modules / H: 3.6 cm W: 6.5 cm D: 8.3 cm

case, however, it will no longer be possible to interrupt power supply propagation.

POE power supply unit art. 1451

The power supply unit converts an Ethernet connection into a POE-type connection supplying an internal unit. The power supply unit is necessary if ViP devices (door entry monitors / door-entry phones) are installed on existing Ethernet networks with non-POE (Power Over Ethernet) connections.

Description

230 V power supply socket.

2. Indicator LED:

a) Power supply enabled indication. b) Error indication. c) Ethernet cable connected to OUT port indication.

3. OUT Ethernet port (for the connection of Planux art. 6202, Maestro art. 5900 internal units).

4. IN Ethernet ports (for the connection of a non-POE Ethernet network).

Technical characteristics

Input voltage 100 - 240 V AC (0.95 A)

Output voltage 56 V DC (0.35 A)

Powe r 33.6 W

Frequency 50 - 60 Hz

Temperature thresholds -20 / +50°C

Dimensions H: 3.7 cm W: 6.5 cm D: 16.4 cm

Planux bracket art. 6231.

Terminal blocks for connection.

0V PA N CFP

S+

OPOP+ 0V

OUT 1

ViP - Standard POE power supply selector.

Reference for CFP and PAN terminals. Panic contact terminal. Floor door call contact terminal.

Additional ringtone terminals.

Optically coupled input terminals.

Reference for OUT1 and AL terminals. LOW-side output terminal.

Alarm contact terminal.

3. Monitor-bracket connectors.

3. RJ45 bracket-network connector.

Planux monitor art. 6202

Technical characteristics

Absorption

Min. 0.7 W Max. 2.6 W (value for complete bracket + monitor product)

Power supply 36/57 Vdc 3A Max.

3.5" colour LCD display.

2. Speaker.

3. Speech button.

4. Menu button.

5. Conﬁrm button.

6. Navigation keypad.

7. Programmable buttons 1 and 2.

8. Privacy - Doctor / Programmable button.

9. Self-ignition / Programmable button.

10. Door lock / Programmable button.

11. Microphone.

Technical characteristics

Absorption

Min. 0.7 W Max. 2.6 W (value for complete bracket + monitor product)

Power supply 36/57 Vdc 3A Max.

Dimensions H: 6.2 cm W: 7.2 cm D: 9 cm

Maestro bracket art. 5931.

Terminal blocks for connection.

OUT 1 OUT 1

AL AL

PA N PA N

CFP CFP

-LED +LED

C5 P5

S-

S+

Monitor-bracket connector.

LOW-side output terminal.

Alarm contact terminals.

Panic contact terminals.

Floor door call contact terminals.

LED contact terminals.

Terminals for contacts of buttons that can be used as free contact.

Additional ringtone terminals.

3. RJ45 bracket-network connector.

4. ViP - Standard POE power supply selector.

Maestro monitor art. 5900

Technical characteristics

Absorption

Min. 0.7 W Max. 2.6 W (value for complete bracket + monitor product)

Power supply 36/57 Vdc 3A Max.

91011

5.6" colour LCD display.

2. Door lock / Programmable button.

3. Speech button.

4. Privacy - Doctor / Programmable button.

5. Speaker.

6. Programmable buttons 1 - 2 - 3 - 4 - 5.

7. Microphone.

8. Yellow LED.

a) Flashes to indicate video message waiting / door open. b) Remains steadily lit to indicate that the video memory function is enabled.

9. Blue LED, audio enabled.

10. Green LED, absent message enabled.

11. Red LED, Privacy function / Doctor function enabled.

Technical characteristics

Absorption

Min. 0.7 W Max. 2.6 W (value for complete bracket + monitor product)

Power supply 36/57 Vdc 3A Max.

Dimensions H: 6.2 cm W: 7.2 cm D: 9 cm

Easycom door-entry phone art. 6203

Speaker.

2. Programmable buttons.

3. Switchboard call button.

9. ViP - Standard POE power supply selector.

10. RJ45 bracket-network connector.

11. Terminal block for connection.

4. Speech button.

5. Microphone.

6. Door lock button.

7. Loudspeaker volume selector.

8. Ringtone volume selector.

CFP

GND

Technical characteristics

Absorption Min. 0.7 W Max. 2.6 W (value for complete bracket + monitor product)

Power supply 36/57 Vdc 3A Max.

Dimensions H: 16 cm W: 9.1 cm D: 2.7 cm

S+

S-

Ringtone repetition terminals.

Floor door call contact terminal.

Alarm contact terminal. Common terminal for alarm

contact and ﬂoor door call.

ViP Manager software art. 1449

CD-ROM software for PC installation, for the programming and conﬁguration of all wired devices in the system. Also allows button programming and management of names in external unit directories. Includes a special cable for connection between switch 1440 and PC.

Warning

When connecting a PC to a ViP system, the special cable supplied with software art. 1449 must be used.

Powercom module for audio/video unit art. 3331/0-1-2

Module preset for audio/video speaker units. Requires audio/video unit art. 4662C to complete installation. Versions with 0, 1 and 2 buttons are available.

Powercom call button module art. 3337/3-4-6

Additional call button module. Versions with 3, 4 and 6 buttons are available.

Backlit module with actuator relay art. 3327

Backlit module with LEDs for various indications and additional 10 A relay.

Technical characteristics

Power supply 13 Vac

Temperature thresholds -30 / +55°C

Dimensions H: 8.9 cm W: 11.2 cm D: 4 cm

Barcode Reader art. 1450

Barcode reader for reading the unique code of the device to be programmed.

Description

Technical characteristics

Power supply 13 Vac 3A

Temperature thresholds -30 / +55°C

Dimensions H: 8.9 cm W: 11.2 cm D: 4 cm

Technical characteristics

Power supply USB

Digital call module art. 3370

Digital call module complete with electronic directory with graphic LCD display. Also functions as a coded electronic key module. Names can be scrolled using the two search buttons or by entering the initial letter of the required name. Once the right name has been found, press the call button. The user code can also be entered to make a direct call.

Graphic LCD display.

2. Search buttons.

3. Call / select menu button.

4. Search name / Exit menu button.

~ ~: Power supply terminals.

PR -: Programming terminals. TX RX: RS232 line terminals (not used).

-: RS232 line negative terminal (not used). D- D: RS485 data line.

N.B. Up to this point, the functions linked to the RS485 line have not been implemented.

5. Call / local door-opener button.

6. Delete character / Pause call button.

Technical characteristics

Power supply 13 Vac

Temperature thresholds -30 / +55°C

Dimensions H: 18 cm W: 11.2 cm D: 4 cm

Audio / video unit art. 4662C

ViP system audio-video unit with terminal block, complete with spherical lens adjustable colour camera.

1. Terminal block for connection.

NC / NO: Door lock connection terminals. COM: Common terminal. DO: Door Open terminal. RTE / -: Timed relay control terminals. ~ ~: Power supply terminals. TX- / TX+: Ethernet transmission line terminals. RX- / RX+: Ethernet reception line terminals.

Technical characteristics

Power supply 13 Vac

Temperature thresholds -30 / +55°C

Dimensions H: 10.2 cm W: 5.5 cm D: 3.5 cm

Remote cameras module art. 1445

The remote cameras module art. 1440 transmits the video signals received from 4 cameras.

Description

Video signal from cameras input terminals.

V1 SH

V2 SH

V3 SH

V4 SH

2. Secondary power supply terminals.

To be used if the POE network power supply is insufﬁcient.

AUX GND

3. Network connection Ethernet port.

4. RS485 line terminals.

GND

Input terminal for composite video signal from camera 1 Camera 1 shield terminal

Input terminal for composite video signal from camera 2 Camera 2 shield terminal

Input terminal for composite video signal from camera 3 Camera 3 shield terminal

Input terminal for composite video signal from camera 4 Camera 4 shield terminal

12 - 24 V DC power supply terminal Earth terminal

Earth terminal

D-

D+

5. RS485 line closure jumper.

RS485 data line

N.B. Up to this point, the functions linked to the RS485 line have not been implemented.

Technical characteristics

Absorption Min. 0.7 W Max. 2.6 W

Power supply 36/57 Vdc 3A Max.

Temperature thresholds -30 / +55°C

Dimensions 4 DIN modules / H: 3.6 cm W: 6.5 cm D: 8.3 cm

For wiring, see diagram VIP/004

Chapter 3: System preparation and speciﬁcations

Art. 1440

Connection distances

Connection distances from power supply unit art. 1395 to external unit art. 3331

0.5 mm2 (Ø 0.8 mm - AWG 20)

Comelit art. 4576-4578

A Max.

10 m

1 mm2 (Ø 1.2 mm - AWG 17)

1.5 mm2 (Ø 1.4 mm - AWG 15)

2.5 mm2 (Ø 1.8 mm - AWG 13)

Connection distances between external unit art. 3331 and Switch art. 1440

The connection distance varies depending on the port used on Switch art. 1440.

Comelit art. 4577

25 m

40 m

60 m

250 m

120 m

10 Mb

100 Mb

1395

Using the 10 Mb port

Art. 1440

Using the 100 Mb port

Connection distances between 2 Switches art. 1440

The connection distance varies depending on the ports used on Switches art. 1440.

Art. 1440

10 Mb

100 Mb

10 Mb

100 Mb

10 Mb

250 m

Art. 1440

10 Mb

250 m

Art. 1440

100 Mb

250 m

Art. 1440

100 Mb

120 m

Connection distances from Switch art. 1440 / Repeater art. 1447 to door-entry phones / door entry monitors

Art. 1440

Art. 1440 Art. 1447

120 m

Art. 1447

120 m

Art. 1447

Connection distances from Switch art. 1440 / Repeater art. 1447 to switchboard art. 1952

The connection distance varies depending on the port used on Switch art. 1440.

Using the 10 Mb port

10 Mb

250 m

Art. 1447

Art. 1440

Using the 100 Mb port

100 Mb

120 m

Art. 1447

Expanding a system using repeater art. 1447

Repeaters art. 1447 can be connected in series to increase the connection distance between two Switches art. 1440 (Max. 8).

The connection distance between a Switch and a Repeater varies depending on the port used on Switch art. 1440.

Art. 1440

The connection distance between 2 Repeaters is always 120 m.

See diagram VIP/005.

10 Mb

250 m

Art. 1447

100 Mb

Guide to ﬁtting a UTP / STP RJ45 Direct network cable

The recommended cables are:

• UTP(UnshieldedTwistedPair):

not protected from electromagnetic interference, maximum length 100 metres. We recommend the use of a Panduit cable code NUL5C04BU-CE.

• STP(ShieldedTwistedPair):

similar to the UTP but with a metal sheath.

The UTP and STP can fall into various categories. Category 5 (CAT 5) cables or greater must be used for the ViP system.

The tools required for ﬁtting are as follows:

• Crimpingpliers6-P8-P.

We recommend using 8-pole Panduit pliers code MPT5-8A.

• Tester for RJ45 cables.

The tester must only be used while the system is off

• 2RJ45connectorsforeachsectionofcable.

We recommend using Panduit connectors code MP588-L.

Fitting procedure

1. Most crimping pliers have two pairs of blades, one pair on one side to strip the wires and another pair on the other side to cut the wires. If the pliers do not allow you to cut the cable sheath, you should use a blade and cut the sheath with it, removing a length of about three centimetres. Be especially careful not to cut or scratch the wires inside the sheath; once cut, most sheaths break if they are folded or pulled.

2. When you have removed the sheath, you will have four pairs of wires, twisted together two by two and of different colours. Untwist the wire pairs so you have 8 separate wires, but make sure you mark them if they are not of different colours (in some cables, the white/colour wires are completely white).

3. Spread the wires out into a fan, in the order in which you need to crimp them from left to right. The cable conﬁguration is illustrated in Table 1 and Figure A.

Table 1

Connector 1 Connector 2

White / Orange White / Orange

Orange Orange

White / Green White / Green

Blue Blue

White / Blue White / Blue

Green Green

White / Brown White / Brown

Brown Brown

N.B.: if the cable colours are different, simply maintain the correct correspondences

FIGURE A

4. Hold the wires tightly between two ngers and atten them so that they are side by side, then straighten them by pulling them taut with your ﬁngers to remove slight curves caused by the previous twisting. Make sure they stay in the correct order.

5. Continuing to hold them taut, trim the excess by 2 centimetres, so that they are all the same length.

6. Insert the wires into the RJ45 connector, still holding them tightly between your ﬁngers. The connector tab should be facing downwards and not visible. The insulating sheath should just reach the edge of the connector.

7. Make sure the wires are fully inserted by inspecting the side of the transparent connector. Next, insert the connector into the crimping pliers and, using both hands, crimp the connector so as to secure the wires. The pliers should not open if they did not close fully.

8. Now repeat steps 1 to 7 above, to crimp the cable on the other side.

Complete connector example

+ 42 hidden pages