Code 3 Halogen Duo Bulb Work Light User Manual

INSTALLATION MANUAL

www.code3pse.com

Tech Support: (314) 996-2800

2 3/4"

TO MOUNT WITH HAT BRACKET DRILL (2) 21/64" DIA HOLES AT DESIRED LOCATION.

TO MOUNT WITHOUT HAT BRACKET DRILL (1) 13/32" DIA HOLE AT DESIRED LOCATION.

MOUNTING:

DUO POWER HALOGEN WORK LAMP

Duo Power Halogen Work Lamp

FLOOD---MODEL # = DBWL222FL SPOT-----MODEL # = DBWL222SP

6.5"High X 6.9"Wide X 3.3"Deep

(2) 55 Watt H3 Halogen Lamps

Operating Voltage : 12V

Wide Angle Lens

Adjustable 360 Degrees

Horizontally

HAT BRACKET

Code 3 is a registered trademark of Code 3, Inc. a subsidiary of Public Safety Equipment, Inc.

WIRING:

1. WIRE GAUGE: USE MINIMUM 14 GAUGE WIRE & CONNECTORS

2. CONNECT RED (+) WIRE TO POSITIVE OR POWER. CONNECT BLACK (-) WIRE TO NEGATIVE OR GROUND.

3. FUSE REQUIREMENTS: 15AMP FUSE.

4. WEATHER RESISTANT CONNECTORS RECOMMENDED.

St. Louis, Missouri 63114-2029—USA

Ph. (314) 426-2700 Fax (314) 426-1337

Revision 0, 09/11 - Instruction Book Part No. T15477

Adjustable 180 Degrees

Vertically

Code 3®, Inc.

10986 N. Warson Road

www.code3pse.com