CMA Dishmachines E3DEXT, ECEXT, E3D, EC Specifications
MODEL E ENERGY SAVER
FEATURES AND FACTS:
CMA Dishmachines 12700 Knott Street Garden Grove, CA 92841• 800-854-6417 • 714-898-8781 • Fax: 714-895-2141 • www.cmadishmachines.com
CMA reserves the right to modify specifications or discontinue models without prior notification.
Printed in the U.S.A. © 11-2014 CMA, Inc.
U
L
R
LISTED
COMMERCIAL
DISHWASHER
864T
USC
n Energy Star Qualified.
n 40 racks / 160 covers per hour.
n Economical to operate. Uses only 1.01
gallons of water per cycle.
n All stainless steel construction assures long
life and years of trouble free operation.
n Unique spray arm system features upper
and lower stainless steel wash arms with
reinforced end caps.
n Top mounted controls include built-in
chemical pumps and deliming system for
dealing with scale.
n Auto start/stop makes operation safe
and easy.
n New integrated scrap tray prevents food soil
from entering drain system.
n Airgap fill system.
3090590
MODEL E
AVAILABLE IN STRAIGHT
AND CORNER MODEL
MODEL E EXT
WITH 20-1/2" DOOR OPENING
AVAILABLE IN STRAIGHT
AND CORNER MODEL
Available Options
n Sanitizer Alarm
n Alternative cycle times
n Pull Pins
n Stainless Steel Scrap Trap Up
Grade
n
The “TEMP-SURE” requires a
seperate 208-240v 3 phase
40 amp power supply
n 3 Doors open
n Extended (Tall) version
CONVERTIBLE CORNER TO
STRAIGHT AND STRAIGHT TO
CORNER.
Gallons Of Water
Per Cycle!
USES ONLY
1.01
LOW WATER
MACHINES
DISHMACHINES
CMA
®
Registered Trademark
MIZER
OPTIONAL 3 DOOR
MODEL AVAILABLE
FOR STRAIGHT AND
CORNER OPERATION
17"
S
TANDARD
2
0
1
/2"
E-EXT
1
1" ADJ 12"
S
CRAP TRAP DRAIN
F
ACING FLOOR
D
OOR OPENING 20
3
/4"
7
4-1/2"
80-1/2"
E
-EXT
56"
ADJ
5
7"
59"
ADJ
60"
E
-EXT
R
IGHT VIEW
Summary Specifications: Model E/E-3/E-EXT
CMA Energy Mizer model E/E-3/E-EXT(Extended 20-1/2" door opening) low temperature, chemical sanitizing commercial
dishwashers meet ETL, UL, and CUL sanitation and construction standards WITHOUT the use of BOOSTER or TANK
HEATERS. The model E/E-3/E-EXT is constructed e ntire ly o f st ainle ss s te el. Each unit aut om atica lly washe s, r inses
and san it izes ut en sils in sta ndard 19-
-
3/4"x19 -3/4" racks. Units come with standard upper and lower stainless steel wash
arms. Note: This machine does not have built-in heaters, therefore produces no steam.
MODEL E/E-3/E-EXT USA METRIC
OPERATING CAPACITY
RACKS PER HOUR
(NSF RATED) 40 40
OPERATING CYCLE
WASH TIME-SEC 45 45
RINSE TIME-SEC 30 30
DWELL TIME-SEC 15 15
TOTAL CYCLE TIME 90 90
PUMP CAPACITY 52 GPM (197 LPM)
OPERATING TEMPERATURE
REQUIRED 120°F (49°C)
RECOMMENDED 140°F (60°C)
WATER CONSUMPTION
PER RACK 1.01 GAL. (13.79 L)
PER HOUR 37 GPH (139 LPH)
WATER REQUIREMENTS
WATER INLET 1/2" (1.27cm)
DRAIN-I.P.S. 2" (5.1cm)
Specifications:
WASH PUMP MOTORS HP 11
DIMENSIONS
DEPTH 25-3/4" (65.4cm)
WIDTH (OUTSIDE DIMENSION) 25-3/4" (65.4cm)
HEIGHT 56"-57" (142.2cm-144.8cm)
E-EXT 59"-60" (150cm-152cm)
STANDARD
TABLE HEIGHT 34" (86cm)
MAXIMUM CLEARANCE
FOR DISHES 17" (43cm)
E-EXT 20-1/2" (52cm)
STANDARD DISHRACK 11
DIMENSIONS 19-3/4"X19-3/4" (50X50cm)
ELECTRICAL RATING VOLTS AMPS
115 16
SHIPPING WEIGHT
APPROXIMATE 218# (98.7kg)
E-EXT L 260# (117.8kg)
USA METRIC
3
4"
ADJ
35"
TOP VIEW E-AH
CMA TABLE DIMENSION
TOP VIEW E-C
FRONT VIEW
CMA Dishmachines 12700 Knott Street Garden Grove, CA 92841• 800-854-6417 • 714-898-8781 • Fax: 714-895-2141 • www.cmadishmachines.com
CMA reserves the right to modify specifications or discontinue models without prior notification.
Printed in the U.S.A. © 11-2014 CMA, Inc.
253/4"
91/2"
1
0"
W
ATER INLET
3" OFF THE TOP
E
LECTRICAL
H
OOK-UP
3
" OFF THE TOP
5"Min
253/4"
41/2"
25-1/4"
Inside tank
Dimension
2
5
3
/4"
91/2"
41/2"
1
0"
5"Min
WATER INLET
3
" OFF THE TOP
ELECTRICAL
HOOK-UP
3" OFF THE TOP
253/4"
WARNING: Plumbing connections must be made by a qualified service company who will comply with all available Federal, State, and Local Health,
Plumbing and Safety codes.
MODEL E ENERGY SAVER
LOW WATER
MACHINES
2 3/4"
1-1/4"MAX. 3/16"
MIN.
21"
6"
M
IN.
2
5 - 3/ 8
DISHMACHINES
U
L
R
LISTED
COMMERCIAL
DISHWASHER
864T
USC
3090590
CMA
®
Registered Trademark
MIZER
Loading...