Clearsounds BTS001 User Manual
BTS001
Stereo Bluetooth Speaker
User’s manual
Brief introduction…………………………………………… …..…..1
1. Bluetooth wireless communication technology………………….…...1
2. About BTS001…………………………………………………….….1
Before use………………………………………………………...…..2
1. Overview…………………………………………………………...…2
Basic operation………………………………………………..….….2
1. Turning on/off BTS001…………………………… ……… ……….… 2
2. Pairing BTS001 with Bluetooth devices………………….…….….…3
3. Music playback…………………………………………………....….4
4. Making calls with BTS001……………………………...………..…..6
5. The operation of BTS001………………………………………….…6
6. LED indicator…………………………….……………………….….8
Care and maintenance……………………………….……….…….8
FAQs……………………………………………………..…….…….8
Specifications…………………………………………….…….……9
Welcome to this stereo Bluetooth speaker, BTS001. Please read this user’s
manual carefully before use.
Brief introduction
1. Bluetooth wireless communication technology
Bluetooth is a standard of close range radio -communication tech nology that
was drawn up by Ericsson, IBM, Intel, Nokia and Toshiba. With Bluetooth
technology, we can achieve the highest transmission rate among cell phones,
computers, printers, PDAs and ot her devices. The max transmission range of
class II is 10 meters while the max transmission range of class I can reach
up to 100 meters.
2. About the BTS001
BTS001 is a stereo Bluetooth speaker. It supports the following profiles:
HFP —— Hands-free Profile
A2DP—— Advanced Audio Distribution Profile
AVRCP——Audio/Video Remote Control Profile
You can listen to music wirelessly using the BTS001 . It has the following
features:
1) Pairing with a Bluetooth cell phone or PDA supporting HFP.
Answer call, end call and reject call
Redial last number
Voice dial
Adjust the volume
Three-way calling
2) Pairing with a Bluetooth music device or Bluetooth transmitter
supporting A2DP.
Enjoy music wirele s sly
Adjust the volume
Remote control pause/play
Remote control previous/next song
3) It is powered by the AC power adaptor or 6×AA alkaline ba tteries
When using indoors, you can use AC power adaptor to supply power.
When using outdoors, you can use 6×AA alkaline batteries to supply
power.
1
Before use
1. Overview
Basic operation
1. Turning on/off BTS001
Function Operation
Turn on
BTS001
Turn off
BTS001
Remark: Every time the BTS001 is turned on, it will connect to the last
connected device automatically. If no device can be connected after 5
minutes, it will turn off automatically in order to save power.
Press and hold
button for 3-5 seconds
Press and hold
button for 2-3 seconds
2
LED
indicator
Blue LED
flashes slowly
Red LED is on
and then off
Indication
tone
A string of
tones
A string of
tones
2. Pairing the BTS001 with Bluetooth devices
How to enter pairing mode
Function Status of BTS001 Operation LED indicator
Enter
pairing
mode
Remarks:
Pairing mode will last 5 minutes, the BTS001 will turn off automatically
if no device can be connected after 5 minutes.
You will hear 2 “Du” tones wh ile entering pairing mode.
When the BTS001 exits connection with a Bluetooth device or
disconnects to a Bluetooth device owing to exceeding effective range, it
will return to pairing mode automatically.
Pairing the BTS001 with a Bluetooth cell phone
Please make sure your cell phone is Bluetooth-enabled. Specific pairing
steps may vary with different cell phones. Please refer to your cell phone’s
user’s manual for further information. The general pairing steps are as
follows:
1) Keep BTS001 and your Bluetooth cell phone within 1 meter when
pairing;
2) Enter BTS001’s pairing mode (refer to “How to enter pairing mode);
3) Turn on your cell phone’s Bluetooth function and search for Bluetooth
devices. After the search is completed, select “BTS001” from the
Bluetooth device list;
4) According to the indication, enter password or PIN No:”0000”, and
press ”Yes” or “confirm”;
5) After successful pairing, select “BTS001” from the Bluetooth device list
and press “connect”;
6) After successful connect ion, the Blue LED of BTS001 will flash once
every 2 seconds.
Remarks:
If the pairing has failed, please switch off BTS001 first and then try
re-pairing according to steps 1～6 mention ed above.
Just turned off Press and hold
Turned on and not
connected to a
Bluetooth device
button for
3-5 seconds
Short press
button
3
Red and blue
LEDs flash
alternately
Red and blue
LEDs flash
alternately
Loading...