SUCTION LIFTERS
Model Nos: CHT706 & CHT707
INSTRUCTIONS FOR USE
Thank you for purchasing this CLARKE product.
Please read and follow the instructions carefully. In doing so you will ensure the safety of yourself
and others around you, and you can look forward to the product giving you long & satisfactory
service.
GENERAL SAFETY RULES
Important: Failure to follow these
precautions could result in personal injury
and or damage to property.
Always check that the suction lifter pads are in
good condition before use
Always ensure both heads are securely fixed
before lifting.
Only suitable for non-porous materials such as
glass, marble etc.
Never use as a climbing aid or hang from the
suction lifters.
Never prise off the suction cups.
Never use for lifting in conjunction with cranes
or winches.
Always ensure lifting surfaces are clean and
dry before lifting.
Always keep work area clean. Cluttered areas
invite accidents.
Always keep your proper footing and balance
at all times - don’t overreach. For best footing,
wear rubber soled footwear. Keep floor area
clear of scrap materials etc.
Always keep children away from work areas.
OPERATION
Push the levers down to secure the pad.
Ensure lever is locked in position before lifting.
Lift lever up to release pad. Ensure lever is all
the way up before releasing.
MAX WORKING LOAD
Never exceed the maximum working load.
Part Nos: 1801706 & 1801707
Model: CHT706 40kg
Model: CHT707 80kg (per pair)
GUARANTEE
This product is guaranteed against faulty manufacture for a period of 12 months from the date of
purchase. Please keep your receipt which will be required as proof of purchase.
This guarantee is invalid if the product is found to have been abused or tampered with in any way,
or not used for its intended purpose. Faulty goods should be returned to their place of purchase.
No product can be returned to us without prior permission. This guarantee does not effect your
statutory rights.
GC0812
Loading...