Page 1
BRICK CUTTER
BRICK CUTTER
Model No: CHT532
Part No: 1801532
Thank you for purchasing this Clarke Brick Cutter. Please read this leaflet carefully
to ensure you use it properly and safely.
CLARKE GUARANTEE
This CLARKE product is guaranteed against faulty manufacture for a period
of 12 months from the date of purchase. Please keep your receipt as proof
of purchase.
This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for the purpose for which it was
intended.
Faulty goods should be returned to their place of purchase, no product
can be returned to us without prior permission.
This guarantee does not affect your statutory rights.
SAFETY PRECAUTIONS
• ALWAYS keep fingers well away from the cutting blades.
• ALWAYS wear safety goggles, manufactured to the latest European Safety
Standards. Everyday eyeglasses do not have impact resistant lenses, they are
not safety glasses.
• Keep children well away from the area where the tool is being used.
Model No: CHT532
Part No: 1801532
Thank you for purchasing this Clarke Brick Cutter. Please read this leaflet carefully
to ensure you use it properly and safely.
CLARKE GUARANTEE
This CLARKE product is guaranteed against faulty manufacture for a period
of 12 months from the date of purchase. Please keep your receipt as proof
of purchase.
This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for the purpose for which it was
intended.
Faulty goods should be returned to their place of purchase, no product
can be returned to us without prior permission.
This guarantee does not affect your statutory rights.
SAFETY PRECAUTIONS
• ALWAYS keep fingers well away from the cutting blades.
• ALWAYS wear safety goggles, manufactured to the latest European Safety
Standards. Everyday eyeglasses do not have impact resistant lenses, they are
not safety glasses.
• Keep children well away from the area where the tool is being used.
Page 2
Assemble the brick cutter as follows:
Assemble the brick cutter as follows:
Arrange the components as shown,
with cutting edge of blade
uppermost
2
Slide the upper blade into the
slot in the post, fully - i.e. so that
the outer of the two guides
locates on the rear face of the
post, as shown, and the anvil is
uppermost
Place the post as shown, over the blade
1
3
Arrange the components as shown,
with cutting edge of blade
uppermost
2
Slide the upper blade into the
slot in the post, fully - i.e. so that
the outer of the two guides
locates on the rear face of the
post, as shown, and the anvil is
uppermost
Place the post as shown, over the blade
1
3
4
Place the brick on to the lower blade
and support, so that the break line is
over the blade and the anvil is
approximately central over the brick.
Strike the anvil hard with a heavy
hammer.
CLARKE International: Hemnall Street, Epping, Essex CM16 4LG
4
Place the brick on to the lower blade
and support, so that the break line is
over the blade and the anvil is
approximately central over the brick.
Strike the anvil hard with a heavy
hammer.
CLARKE International: Hemnall Street, Epping, Essex CM16 4LG
Loading...