TOOL KIT
Model No: CHT 147
Thank you for purchasing this Clarke, 162 piece professional tool kit.
Your kit will provide you with many years satisfactory service, providing each tool is used for the purpose for which it was
intended.
DO NOT use for other purposes, as damage will inevitably occur. Always keep your tools clean and dry. If they are used in wet
conditions, always dry them before storing, and preferably wipe with an oily cloth.
Your kit comprises the following components:
• 10 combination wrenches ........................................................................ 8mm - 19mm
• 16 x 1/2” Square Drive sockets ................................................................. 10mm - 32mm
• 12 x 1/4” Square Drive sockets ................................................................. 4mm - 13mm
• 10 deep sockets 1/2” Square Drive ......................................................... 4mm - 13mm
• 1 x Flexible extension Bar 1/4” Square Drive ........................................... 145mm
• 1 x Sliding ‘T’ Bar 1/4” Square Drive ......................................................... 125mm
• 2 x Extension bars 1/4” Square Drive ....................................................... 50mm & 100mm
• 3 x Hex. key wrenches ............................................................................... 1.5mm - 2.5mm
• 1 x Universal Joint ....................................................................................... 1/2” Square Drive
• 1 x Ratchet handle .................................................................................... 1/2” Square Drive
• 29 assorted Torx, Phillips, Posidrive, Hex sockets ..................................... 1/4” drive
• 1 x Ratchet handle .................................................................................... 1/4” Square Drive
• 1 x Sliding ‘T’ Bar 1/4” Square Drive ......................................................... 125mm
• 4 x XZN Bit (100mm shank) ........................................................................ 6mm - 12mm
• 1 x Bit adapter ............................................................................................ 1/2” x 10mm Hex.
• Coupler ........................................................................................................ 1/2” Square Drive
• Sliding ‘T’ Bar 1/4” drive ............................................................................. 250mm
• 2 x Extension bars 1/2” Square Drive ....................................................... 125mm & 250mm
• 2 x Ignition Plug sockets ............................................................................. 16mm & 21mm
• Universal Joint ............................................................................................. 1/4” Square Drive
• Crimping Pliers - 5 way .............................................................................. 9”
• Long Nose Pliers .......................................................................................... 7”
• 1 x terminal set ........................................................................................... 30 Piece
• 2 x Phillips screwdrivers .............................................................................. 38mm & 100mm
• 2 x Slotted Screwdrivers ............................................................................. 38mm & 100mm
• 1 x Universal Grip
• Auto Tester .................................................................................................. 6V & 12V
• Utility Knife
• Hammer ...................................................................................................... 300gm
• 1 x Extendable Wheel Nut Lever
• 1 x ‘T’ Handle Nut Driver
• 1 x Feeler Gauge set
• 20 x Bits, Torx, Slotted Screwdriver, Hexagon
Clarke International: Hemnall Street, Epping, Essex CM16 4LG. Tel: +44 (0)1992 565300
Loading...