Discountcarstereo.com
C
L
A
R
I
O
N
E
A
1
2
5
1
B
i
P
o
d
I
N
T
E
R
F
A
C
E
C
L
A
R
I
O
N
E
A
1
2
5
1
B
i
P
o
d
I
N
T
E
R
F
C
L
A
R
I
O
N
E
A
1
2
5
1
B
i
P
o
d
I
N
T
E
(
a
b
b
r
e
v
i
O
W
N
E
R
’
S
M
A
N
U
A
L
(
a
O
W
N
E
R
’
S
M
A
N
U
O
W
N
E
R
’
S
M
A
N
INTRODUCTION
The interface adapter for iPod by Clarion, EA1251, works by simulating the iPod as a 6 disc CeNET CD
Changer. Please consult your main unit’s owner’s manual for CD Changer operations before beginning to
use the EA1251.
Clarion multimedia VRX series cannot control the EA1251 through the KEY PAD screen or the list screen. If
necessary please use the functions button instead. Some EA1251 functions might not be available.
Some head unit models with CD-Text function have the capability to show ID-3 TAG if the iPod is
connected through the EA1251. Please refer to title display section for more details.
For a list of main units compatible with the EA1251, please consult your nearest Clarion dealer.
CONNECTION
Please consult your nearest Clarion dealer before attempting to connect the EA1251 to your main units and
iPod. Improper connection might damage your main unit, EA1251, iPod or your vehicle wiring.
Please make sure the yellow wire (Bus power lead) is connected on the CeNET compatible main unit (this
wire usually has a 3 Amp Fuse inserted) connects to the battery. If this wire is not connected, the iPod
interface will not function.
U
A
A
L
L
b
(
a
b
a
b
r
e
v
i
a
b
r
e
v
i
a
R
t
t
t
A
F
A
e
d
)
e
d
)
e
d
)
C
C
E
E
Please refer to the wiring instruction for your CeNET main unit or contact your clarion dealer.
Note:
The C-BUS conversion adapter (RCB-138) is not compatible with this interface.
OPERATION
START –UP
After connecting your iPod to the EA1251, the iPod display will change to the following:
To start iPod operations, change the main unit mode to CD Changer mode. Playback will start automatically.
The display changes from: Disc check → Disc Repeat → Disc Playing
If the iPod is not connected, the main unit will display “NO MAGAZINE”.
The main unit is unable to detect the presence of the iPod if the iPod battery is discharged (flat)
Please refer to the playback section for detailed operation information.
DISCONNECTING
The iPod automatically switches “on” after connection to the EA1251, and its power is charged as long as it
stays connected with the vehicle ignition key turn to ACC or ON.
To switch the iPod off manually, disconnect it from the EA1251 adapter.
If vehicles ignition is turned to ACC off, playback is changed to pause, and the iPod will go to power off
mode in a few minutes.
PLAYBACK
The iPod buttons are disabled and the display is locks after it is connected to the EA1251. All iPod
operations are controlled from the main unit. Some iPod operations and features will be unavailable. Please
read this manual carefully to optimize your iPod operations.
To better understand the playback features, please refer to the PLAYLIST section of this manual.
Default Playback setting
By default, the playback setting will be:
• Start to play from DISC1 (all songs play)
• Shuttle (Random ) off
• DISC Repeat ON
When the ipod is connected, the main unit will initially display “DISC” and “RPT”
SONG NUMBER DISPLAY.
During Playback, the main unit will display song number in sequence. However, only a maximum of two
digits are displayed. If there are more than 99 songs on your iPod, only the last two digits will be displayed.
For example, songs number 102 and 1002 will both be displayed as “O2”
PLAY/PAUSE
Press Play/Pause button on the main unit to play/pause iPod playback