CITROEN NAVIDRIVE - XSARA PICASSO, C8 NaviDrive User Manual

Download

Page 1

NaviDrive

Page 2

NAVIDRIVE

ITH

CHANGER

* According to version or option

2 4

6 3

TSR

QW PNOM

XFG

Page 3

CONTENTS

The equipment and operation modes are dependent on vehicle version and options, on country of marketing and on the service contract subscription.

NAVIDRIVE

Button controls...............................................................................................................................................................................................2 - 3

Controls at the steering wheel............................................................................................................................................................................4

Additional telematic control.................................................................................................................................................................................5

Operation - General............................................................................................................................................................................................6

Main Menu - Menu structure........................................................................................................................................................................7 - 12

Voice commands.......................................................................................................................................................................................13 - 17

Navigation - Traffic information..................................................................................................................................................................18 - 24

Audio (Radio, CD player, CD changer, MP3)............................................................................................................................................25 - 33

Trip computer....................................................................................................................................................................................................34

Directory.....................................................................................................................................................................................................35 - 36

Telephone and Telematic Services............................................................................................................................................................37 - 42

Configuration.....................................................................................................................................................................................................43

Map............................................................................................................................................................................................................44 - 46

Video.................................................................................................................................................................................................................47

Index NaviDrive.................................................................................................................................................................................................48

Page 4

BUTTON CONTROLS

CD eject.

B SOURCE Short press:

Selection of audio source (RADIO, CD, CD CHANGER and MP3) or Audio/Video auxiliary input (video is available if the vehicle is moving at less than 5 km/h).

C Press:

On/off.

Rotate:

Volume adjust.

D Short press:

Answer call. Display of telephone menu.

E Short press:

Access to the CITROËN services menu.

Long press:

Direct call to the CITROËN assistance

service.

F MODE

Selection of type of information displayed on the right of the screen (Radio, Navigation, etc.).

•

If you rotate it, the control allows you:

To move

around the screen to choose a function,

a parameter or a value.

To decrease

to increase

an adjustment value.

To scroll down

the list of elements to be selected.

To modify

the scale of the map on the display

•

If you press it, the control allows you:

To access

the contextual menu (short-cut to cer-

tain choices of the function displayed on the right).

To validate

the function chosen or the value mod-

ified.

To select

a parameter such as "

adjust

" or "

list

" to

be able to modify it.

To activate/deactivate

a function.

H Radio source:

Manual search of higher frequencies.

CD/MP3 changer source:

Selection of previous CD /

previous CD-cover.

Other sources:

Move in the menus.

I Radio source:

Manual search of lower frequencies.

CD/MP3 changer source:

Selection of the next CD /

next CD-cover.

Other sources:

Move in the menus.

J ESC Short press:

Cancel the current operation or delete a

superimposed display.

Infrared port.

SIM card slot.

L’

SIM card eject button.

M Radio source:

•

Short press:

Automatic search of a higher frequen-

cy.

CD and CD changer source:

•

Short press:

Search of the next track.

•

Long press:

Fast forward with accelerated sound.

MP3 source:

•

Short press:

Search of the next track.

•

Long press:

Rapid scrolling of following tracks.

Other sources:

Moving within the menus.

Page 5

BUTTON CONTROLS

N Radio source:

•

Short press:

Automatic search of lower frequen-

cies.

CD and CD changer source:

•

Short press:

Search of previous track.

•

Long press:

Rapid reverse with accelerated

sound.

MP3 source:

•

Short press:

Search of previous track.

•

Long press:

Rapid scrolling of previous tracks.

Other sources:

Moving within the menus.

O DARK Short successive presses:

•

One press:

Only the top part of the display re-

mains lit.

•

Two presses:

Display off (blank display).

•

Three presses:

Return to the standard display.

Long press (More than 10 seconds):

Re-initialisation of the system.

P MENU Short press:

Access to the Main Menu.

Long press:

Access to the Help Menu for voice commands, to the description of your equipment, to the demonstration of Navigation and to the status of services. In certain countries, this control is deactivated while the vehicle is moving.

Call in progress:

•

Short press:

End a call.

R BAND/

AST

Short press:

Selection of frequency bands and

memory banks.

Long press:

Automatic memorisation of FM stations

(Autostore).

S TA/PTY Short press:

Traffic information on/off.

Long press:

PTY function on/off.

T RDS Short press:

On/Off for the RDS function.

Long press:

PTY function on/off.

U AUDIO Call-up of audio adjustment functions:

Sound ambiences, bass, treble, loudness, fade, balance, speed-sensitive volume.

V SOS

Long press (2 to 8 seconds):

Emergency call.

W Radio source:

Short press:

Recall of pre-set stations

Long press:

Pre-setting of stations.

CD changer source:

Selecting a CD.

Other sources:

Any alphanumeric entry (telephone, address, adjustment of date/time, etc.). Rapid selection of a name commencing with the letter chosen, in the directory and in the SIM card.

CD aperture.

CD changer.

Buttons

H, M, I

and N allow you, in "

Select - Move on Map

", to

move respectively up or down, right or left on the map

Page 6

CONTROLS AT THE STEERING WHEEL

1 Radio source:

•

Scrolling of pre-set stations.

CD changer source:

•

Selection of next or previous CD.

MP3 source:

•

Selection of the next or previous CD-cover.

Other sources:

•

Selection of the next or previous elements of a menu in a screen, a list, an alphabet.

2 Radio source:

•

Short press:

Automatic search of a higher fre-

quency.

CD and CD changer source:

•

Short press:

Search of the next track.

•

Long press:

Fast forward with accelerated

sound.

MP3 source:

•

Short press:

Search of the next track.

•

Long press:

Rapid scrolling of following tracks.

3 Radio source:

•

Short press:

Automatic search of lower frequen-

cies.

CD and CD changer source:

•

Short press:

Search of previous track.

•

Long press:

Rapid reverse with accelerated

sound.

MP3 source:

•

Short press:

Search of previous track.

•

Long press:

Rapid scrolling of previous tracks.

Volume increase.

5 SRC Incoming call, telephone communication:

•

Short press:

Answer call, end call.

In a menu, a list, an alphabet:

•

Short presses:

Validation of the function, the el-

ement or the value chosen.

Other cases:

•

Short press:

Change of audio source (RADIO, CD, CD CHANGER, MP3, audio/video auxiliary input).

•

Long press:

Display of the telephone contextu-

al menu (excluding numbers).

Volume decrease.

4+6 Simultaneous press on both buttons:

MUTE

(temporary sound pause).

Page 7

ADDITIONAL TELEMATIC CONTROL

It allows access to certain functions, without you having to use the NaviDrive buttons, also to the contextual menus for certain functions.

The control

This control has two functions:

•

Rotate:

To move

around the screen to choose a function, a parameter or a value.

To decrease

to increase

an ad-

justment value.

To scroll down

the list of elements to

be selected.

To modify

the scale of the map on

the screen.

•

Press:

To access

the contextual menu (shortcut to certain functions of the application displayed on the right of the screen).

To validate

the function chosen or the value modified.

To select

a parameter such as "

ad-

just

" or "

list

" to be able to modify it.

The "MODE" button

•

Short press:

To select the type of information to be displayed on the right of the screen (radio, navigation, etc.).

•

Long press:

To display general infor-

mation.

The "ESC" button

•

Short press:

Cancel the current oper-

ation or delete a superimposed display.

•

Long press:

Return to the permanent

display.

The "MENU" button

•

Short press:

At any time, access to the

Main menu.

•

Long press:

At any time, access to the

Help menu.

To comply with legislation in certain countries, the "

" button is deacti-

vated while the vehicle is moving.

The "MUSIC" button Short press:

Display of the contextual

menu for the current audio source.

The "TEL" button Short press:

Display of the contextual menu for the telephone function, and pick-up for an incoming call.

The "NAV" button Short press:

Display of the contextual menu for the navigation/guidance function.

To comply with legislation in certain countries, the "

NAV

" button is deactivat-

ed while the vehicle is moving.

The "MAIN" button Short press:

To display general informa-

tion.

Page 8

OPERATION - GENERAL

ON/O

With the ignition key in Drive position (M), press on the control (

) to switch the au-

dio part on or off.

Note:

•

If the audio part of NaviDrive was on before you last switched off the ignition, it will resume automatically when you switch on the ignition again.

•

The source selected when NaviDrive stopped is memorised and will resume when you switch on the ignition again.

•

After the ignition is switched off, with or without the key being present, the NaviDrive can operate for a maximum of 30 minutes following a press on any of the controls (

), (V), (D), (E) or the inser-

tion of a CD in the CD player.

ESCRIPTION

A long press on (P) gives you access to a technical description of your equipment.

SIM

CARD

•

Open the slot (L) by pressing with a ballpoint on the opening situated just above it (

L’

). Next, insert your SIM card

in the slot, then reclose it.

•

The SIM card should only be removed from its location (

) after NaviDrive has

stopped (key in position

(steering

lock) and display off).

•

Its presence is obligatory for certain functions to operate correctly.

RE-

INITIALISATION

In the event of NaviDrive malfunctioning, you can re-initialise it with a long press (more than 10 seconds) on button (

NTI-THEFT SYSTEM

This NaviDrive is coded in such a way that it will function only on your vehicle.

It cannot be used on any other vehicle.

Note:

The anti-theft system is automatic and requires no action on your part.

ECHNICAL SPECIFICATIONS

Your NaviDrive has:

•

3 wave bands (MW/LW/FM).

•

A dual tuner (if colour display) with RDS EON PTY, display of name (PS), Radio TEXT, programme search (RDS), traffic info (TA), Traffic Information (TMC), 24 preselections (18 FM - 6 MW/LW), automatic memorisation of the strongest stations (AST).

•

A CD player compatible with MP3.

•

A GSM dual band telephone phase 2 (900MHz/1800MHz), 2 Watts with voice commands and PIN code memorisation.

•

A voice synthesiser for the purposes of navigation, reading of text messages (SMS) and RDS - TMC information.

•

An audio power of 4X35 W.

Page 9

MAIN MENU

ISPLAY

Depending on your choices, it displays the information for the Navigation functions - Traffic Information, Audio, Directory, Telephone and Telematic Services, Configuration, Map and Video.

It is possible to modify the information displayed on the right of your screen either by pressing on control (

) or by using

voice commands. The information on the left and at the top

of the display depends on the choice made on the right.

Certain types of information and certain actions (alert, adjustments, contextual menu) are signalled by the temporary opening of a window on the display.

OVING WITHIN THE MENUS

Buttons (G), (H), (I), (M), (N) and button (

) at the steering wheel enable movement in the menus and a press on button (

) validates your choices.

You are recommended not to use the NaviDrive controls during driving. In certain countries, certain controls can be deactivated (to comply with national legislation).

AINTENANCE

To keep the screen in good condition, you are recommended to use a nonabrasive cloth and a computer screen cleaning product.

AIN MENU

A press on button (P) gives you access to all the functions that are available on your NaviDrive:

•

Navigation - Traffic information.

•

Audio.

•

Trip computer.

•

Directory.

•

Telephone and Telematic Services.

•

Configuration of your display.

•

Map (if colour display).

•

Video (if colour display).

These are described on the following pages. Certain choices appear only if you have subscribed to a specific contract.

ONTEXTUAL MENU

A press on button (G) gives you access to certain choices that are available for the function displayed on the right of your screen.

Page 10

MENU STRUCTURE

NAVIGATION - TRAFFIC INFORMATION

Page

Enter an address

................................................................................................................

HOOSING A DESTINATION

AGE

NaviDrive Services

..............................................................................................................

Choice of a Centre of interest

................................................................................................

Directory

Repeat Activates or deactivates repetition of playback of the current CD-cover Next Goes to the next CD-cover Previous Goes to the previous CD-cover Cancel Returns to the first level of the voice commands structure Help Displays the voice commands possible at this level What can I say Displays the voice commands possible at this level

Page 18

LIST AND STRUCTURE OF VOICE COMMANDS

Message

Display Displays the list of SMS messages Read Reads the last SMS message received or the SMS selected in the list of messages Cancel Returns to the first level of the voice commands structure Help Displays the voice commands possible at this level What can I say Displays the voice commands possible at this level

Navigation

Stop Stops the current guidance Directory "Pre-recorded label"

Starts guidance towards the address contained in the record associated with the voice label pronounced

Restart Resumes guidance towards the last destination selected

See

No Cancels a request to delete an SMS message Yes Confirms a request to delete an SMS message Previous Changes to the previous radio station, or previous CD/CDC track. If an SMS is being read, reads the previous SMS message Radio Changes to Radio audio source

Radio

Autostore Memorises the 6 strongest FM stations that can be received where the vehicle is List Displays a list of the stations that can be received where the vehicle is

Memory

Selects the station corresponding to the memory bank number given Cancel Returns to the first level of the voice commands structure Help Displays the voice commands possible at this level What can I say Displays the voice commands possible at this level

Previous Starts an automatic search for the previous radio station Next Starts an automatic search for the next radio station Cancel Returns to the first level of the voice commands structure Help Displays the voice commands possible at this level What can I say Displays the voice commands possible at this level

Page 19

LIST AND STRUCTURE OF VOICE COMMANDS

SMS

Stop Stops the reading of SMS messages. Stops voice commands

Next Changes to the next radio station, or next CD/CDC track. If an SMS is being read, reads the next SMS message

Delete Requests deletion of the SMS message currently being read

Telephone

Mail box Starts a telephone call to the user's mail box Last number Starts a telephone call to the most recent number figuring in the user's calls list Voice messaging Starts a telephone call to the user's mail box

Directory "Pre-recorded label"

Starts a telephone call to the first number on the record associated with the voice label pro-

nounced Cancel Returns to the first level of the voice commands structure Help Displays the voice commands possible at this level What can I say Displays the voice commands possible at this level

Help Displays the voice commands possible at the first level

What can I

say

Displays the voice commands possible at the first level

Page 20

NAVIGATION - TRAFFIC INFORMATION

When navigation is to be used for the first time, or when the battery has been disconnected for any reason, the navigation system has to be initialised. For this operation the vehicle must be parked outdoors so that it can pick up satellite signals. Turn the ignition to position M (see vehicle Handbook) and leave for at least fifteen minutes.

NTRODUCTION

The on-board navigation system uses audible and visual indications to guide you towards the destination of your choice. The system uses a cartographic database stored on CD-ROM, and GPS (Global Positioning System). The latter enables your position to be plotted via contact with a number of satellites.

The on-board navigation system is composed of the following elements:

•

A CD-ROM reader.

•

A button for recall of the last voice message - during navigation, a long press on the end of the lighting control stalk repeats the most recent voice information.

•

Cartographic data in the form of a CDROM that has to be inserted, printed side up, in the aperture (

•

A synthesised voice for enunciating guidance instructions during navigation.

•

A display screen.

•

A GPS aerial.

•

Controls on the dashboard and at the steering wheel.

Specific functions or services may vary depending on the CD-ROM version or the country where the system is to be used.

GPS satellite reception or guidance calculation may be affected temporarily (for example under bridges or in underground car parks, etc.) by where the vehicle is located.

TMC

TRAFFIC INFORMATION

In some countries, traffic information messages are transmitted by radio FM stations. Such information, broadcast by the RDS system, can be received and decoded by NaviDrive. See the description of this function from page 22.

OLUME FOR VOICE INSTRUCTIONS

When receiving voice instructions, you can adjust the volume using buttons (

(

) and (6).

You can deactivate voice instructions via the menu "Configuration" - "Display" "Sound".

AIN MENUNAVIGATION

- T

RAFFIC

INFORMATION

Press on (P) then use the control (G) to select the icon Navigation - Traffic information to access the following choices:

•

Selecting a destination

•

Stages and Itineraries

•

Guidance options

•

TMC traffic information

•

Stop/resume guidance

After the start of a guidance, a display cautions you concerning the use of navigation. If you accept its content, press on

. Respect the road regulations that are

in force.

Page 21

NAVIGATION - TRAFFIC INFORMATION

ONTEXTUAL MENU

: N

AVIGATION

RAFFIC INFORMATION

A press on (G) during navigation, brings up a display on the right of the screen, permitting you to:

•

Modify the display of the map:

full screen or right hand side (colour screen only).

•

Alter the route.

During guidance this function lets you modify your original route. Enter the distance of the desired diversion then select the function "

and validate.

•

Memorise the position of the vehicle

. This will be saved in the current directory, under a label for name of town and street (if available on the Navigation CDROM ). Otherwise the label corresponds to GPS coordinates.

•

Modify the guidance criteria for your itinerary

•

Stop/resume guidance

During navigation, provided the navigation CD-ROM is present, the display indicates the manoeuvres to be made:

In navigation: manoeuvre to be made or, momentarily, direction to follow. Not under guidance: representation of a compass.

Next manoeuvre to be made.

Next road to be taken and name of town.

Road currently being taken and name of town.

Symbol concerning Traffic information or the services that are in proximity (colour display).

Estimated time of arrival at destination (based on flowing traffic).

Distance to final destination.

Distance to the next manoeuvre.

Remark:

Depending on the situation of the vehicle and the reception of the GPS information, this information may temporarily be absent from the screen.

Tip:

When Navigation is being displayed, a long press on the "Menu" button activates a demonstration of the Navigation function of your NaviDrive. Next select a destination by means of the Navigation Menu. After entering it, start Navigation for a simulation of the movements of your vehicle. The point of departure will be either the place where the vehicle is now, or the last known location. It is possible to enter a different point of departure via the demonstration menu. This demonstration can let you see a route that you wish to take in the future.

1 23

765

Page 22

NAVIGATION - TRAFFIC INFORMATION

HOOSING A DESTINATION

This menu allows you to:

•

Enter an address.

•

Access

NaviDrive Services

if you have subscribed to a specific contract (assistance and entry of a destination).

•

Choose a centre of interest available

in a town (restaurant, airport, hotel, cinema, theatre, etc.).

•

Choose a destination stored in a directory.

•

Choose one of the last twenty destinations.

NTER AN ADDRESS

The last guidance address is displayed.

1 Enter a town name

- To enter the name of a town, select "

Town

" then validate. Next, select then validate letter by letter or enter them using the alphanumeric keypad. If you make an error, press "

Correct

to delete the last letter entered.

Remark:

After the first letter has been validated, only those letters that can complete an existing name in the database will be displayed.

List

" tells you, as you begin to enter the name of the town, how many towns start with or include the same letters. Select "

List

" to choose one of them.

- Up to 6 names will be displayed automatically. Select a town, then validate. When the complete name of the town is displayed, select it then validate "

2 Enter the name of the street

Enter the street name in the same way as you entered the town name.

Note:

Do not enter the type of road

(street, avenue, etc.).

3 Validation

When the complete name of the street is displayed, select it then validate "

Tips:

•

If you enter only the name of the town and then validate immediately "

you will go directly to the town centre.

•

The function "

Store

" memorises the address displayed into a file of the current directory.

•

The selection "

Present location

" dis-

plays the current address.

•

The selection "

GPS

" brings up the GPS

coordinates.

Page 23

NAVIGATION - TRAFFIC INFORMATION

4 Enter a street no. or the name of an

intersecting street

You can enter the desired street name using either the control (

) or the alpha-

numeric keypad. Select then validate "

Remark:

The first and last street num-

bers are displayed. You can also select a street from the list

of "

Intersections

", which means you do

not have to enter the street no.

Remark:

If the street selected has no numbers, the list of street intersections is automatically displayed.

The complete destination is then displayed. Select then validate "

", to start the

guidance. Follow the action instructions.

HOOSING A CENTRE OF INTEREST

If you desire to be directed to a centre of interest, select the type of centre of interest and validate.

The list of centres of interest of the type selected appears. Select then validate the centre of interest desired, in order to access the menu "

Choice of location

". The last-entered address is displayed. There are 3 possibilities for defining the

location close to which you desire to find a centre of interest:

•

Take the last address entered by validating the function "

•

Enter the name of a different town then enter the street name (optional).

•

Bring up the name of the place you are currently at, via the function "

Present

location

Remark:

If the centre of interest selected is not available at the programmed location, a message informs you of this.

After validation of the location, the centre of interest closest to your location appears. The distance indicated is the distance in a straight line from this location.

A message in the strip (X/n) tells you if there is more than one establishment (n = maximum) offering a similar centre of interest within a radius 50 km in a straight line from the location selected. Use the functions "

", ">>" or "<", ">" to study the list on offer. When the establishment of your choice appears, you can choose:

•"OK

" to activate guidance to this centre

of interest.

•"Store

" to add it to your directory.

•"Contact

" to make a call to this centre

of interest.

ELECTION FROM THE DIRECTORY

This allows you to start guidance towards a location that is stored on a file, with the Navigation CD-ROM present.

ELECTING FROM YOUR MOST RECENT

DESTINATIONS

You can start guidance towards one of the last twenty destinations that have been automatically stored by your installation.

Page 24

NAVIGATION - TRAFFIC INFORMATION

RDS-TMC

TAGES AND ITINERARIES

This menu enables you to:

•

To add a stage onto your itinerary

af-

ter guidance has started.

•

To sort or delete stages.

•

To change your route

. You can indicate the number of kilometres you wish to leave out in order to permit calculation of a new route.

•

To select the destination chosen initially

in order to modify it.

Remark:

if a stage is programmed, the navigation system will still try to go that way unless it has already been passed or deleted.

UIDANCE OPTIONS

This menu enables you to:

•

To define the criteria for calculating your itinerary

so that it will be the quickest or the shortest, taking account of traffic information etc. The last criteria selected are displayed.

•

To adjust the volume of the voice synthesiser for guidance purposes.

•

To activate/deactivate pronunciation of the name of the street

in the voice

command requirements.

•

To show the information from the Navigation CD-ROM.

•

To delete the last destinations.

TMC T

RAFFIC INFORMATION

This menu enables you to:

•

To consult the Traffic Information messages.

•

To filter the traffic information.

•

To adjust the volume of the voice synthesiser for the reading of the information.

•

To activate/deactivate the showing of messages.

The symbols remain dis-

played on the map.

Page 25

RDS-TMC TRAFFIC INFORMATION

As opposed to the road information flashes broadcast by an FM station during its normal programming (see the TA function in RDS), the TMC (Traffic Message Channel) messages are coded and not audible. TMC filters the information that is of interest to you and broadcasts it in the language selected in your NaviDrive, even in a foreign country where the language of the local radio is not your own.

The availability of such information depends on the country and on the region where you are travelling.

This information is displayed in a superimposed window, using symbols on the map (colour screen). Messages can then be read to you by the voice synthesiser.

Remark:

the volume of the voice synthesiser can be adjusted in the menu "TMC Traffic Information" and by moving control (

) while the TMC traffic information

is being heard. The messages contain for example: a

date and time of transmission, the nature of the traffic incident, its location, plus the name and direction of the traffic artery concerned.

They are classed according to the distance of the incident from your vehicle. This list is updated approximately every 15 minutes.

•

To receive and view this traffic information, it is necessary to insert the navigation CD-ROM , to activate traffic information (TMC), to select a type of incident and a type of geographical filtering.

•

Selection of an FM radio station broadcasting RDS-TMC traffic information is automatic. If you want to select a different station, you must use the menu "

Fil-

tering TMC information

" then

Choice of TMC station

Remarks:

•

The multifunction screen displays the symbol "

TMC

" as soon as a station broadcasting TMC information is being received.

•

When the FM station selected is not able to broadcast TMC information, the symbol "

TMC

" will be barred on a monochrome display and shaded on a colour display.

•

Depending on the station selected, the traffic information may be more or less complete and precise, or cover a larger or smaller area. Each radio station is individually responsible for the quality of the information that it broadcasts.

These symbols may be accompanied by an arrow indicating in which traffic direction they are situated.

List of TMC symbols on the colour display

Traffic bottlenecks and queues

Road closures and restrictions

Vehicle size restrictions

Road conditions and dangers

Weather and visibility

Parking restrictions

Restrictions on public transport

Demonstrations

Page 26

RDS-TMC TRAFFIC INFORMATION

ONSULTING OF MESSAGES

This menu gives you access to the

list of

messages

Note:

•

Certain of these messages may offer you a diversion from your route, depending on the TMC information received (it is necessary for you to have selected the "traffic info" guidance option). If you accept one of these messages, then the NaviDrive offers you a diversion and recalculates your itinerary. You can then choose whether or not to accept the offer.

•

A message is sent to you when the incident is imminent. You are informed again when you are approaching the incident.

Tip:

It is possible to consult a message by selecting a symbol present on the map. For this, in the menu "Map" select "Move the map", then the symbol.

ILTERING

TMC

INFORMATION

This menu gives you access to:

•

Activation/deactivation of the itinerary filter

. In navigation, it lets you select only those incidents that are located on the guidance itinerary and in the relevant traffic direction.

•

Filtering by incident

. This allows you to select only certain types of incident (all selected by default).

•

Geographical filter

. This lets you select only the incidents that have occurred around the vehicle or around a specific location.

Remark:

The different filters can be cu-

mulative.

•

Choice of the TMC station

. This allows you to select another station that broadcasts RDS-TMC information.

ILTERING BY INCIDENT

This choice lets you select the nature of the incidents of which you wish to be informed:

•

Those to do with roads, such as traffic conditions, roads closed or vehicle size restrictions, and/or

•

Those concerning the town where you are, such as parking, public transport or demonstrations.

Whether you are able to access this information depends on its availability.

Remark:

if you do not select an incident, you will not receive any TMC traffic information.

EOGRAPHICAL FILTER

This choice lets you select a zone for incidents (radius of 3 to 200 km) of which you wish to be informed:

•

Those happening around your vehicle

•

Those at a location to be selected.

The two filters can be cumulative. The radius value is then common to both.

Page 27

AUDIO

ELECTION OF SOURCE

Press on button (B) or (5) to select the audio source : RADIO, CD, CD CHANGER, MP3 or audio/video auxiliary input.

Remark:

it is necessary to activate the auxiliary input in the menu "Configuration" then "Sound".

OLUME ADJUSTMENT

Rotate the control (C) to increase or decrease the sound volume.

You can also increase or decrease the volume by using controls (4) and (6) at the steering wheel.

Note:

•

The sound volume when you switch off NaviDrive will be the same when you switch it on again.

•

The sound volume is automatically corrected according to vehicle speed if the function "

speed-sensitive volume

" is

active.

•

The sound volume adjustment operates independently for each audio source. Thus volume can be varied according to the sound source.

EMPORARY SOUND PAUSE

Press simultaneously on buttons (4) and (

) at the steering wheel to activate this function. The sound will be paused, regardless of the source selected. The permanent audio sources (radio, CD, CD changer, MP3, auxiliary input) will be cut, but not the others (guidance data for example). To resume sound, press any of the buttons on the dashboard.

OUND ADJUSTMENTS

Each press on button (U) displays the parameter to be adjusted: These are the pre-defined ambiences: bass, treble, loudness, fade (front/rear sound distribution), balance (left/right sound distribution), and speed-sensitive volume.

Control (

) allows you to modify the val-

ues of the parameters displayed.

Note:

•

The value chosen is automatically accepted, without any need for validation.

•

The selection of a particular sound ambience automatically adjusts the bass and treble.

•

Adjustment of bass and treble is available only if you have selected the sound ambience "

None

•

Adjustment of loudness, as well as of bass and treble, when they are available.

RINCIPAL AUDIO MENU

Press on (P) then use the control (G) to select the Audio icon in order to access the following choices:

•

Activate/deactivate the RDS search function in FM.

•

Activate/deactivate the regional search mode in FM.

•

Activate/deactivate the display of Radio Text

, broadcast by the radio station if available ("RT" displays at the bottom of the screen).

•

Activate/deactivate the display of CD MP3 detail.

You change from one source to another by pressing the button (

) or control (5) at

the steering wheel.

Page 28

RADIO SOURCE

ADIO SOURCE CONTEXTUAL MENU

A press on (G) while listening to the radio permits you to:

•

Enter the frequency desired.

•

Display the list of stations.

•

Update the list of stations.

•

Display Radio Text information

, broadcast by the radio station if it is available ("RT" displays at the bottom of the screen).

OTES ON RADIO RECEPTION

Your Navidrive system will be subject to phenomena not encountered by your equipment you have at home. The reception of AM and FM signals may suffer from interference, which is caused by the nature and propagation of the signals and does not reflect on the quality of your radio installation.

In AM, the reception may be affected when passing under power lines or bridges, or when travelling through tunnels.

In FM mode, the reception may be affected by the distance from the station transmitter, the reflecting of signals off obstacles (mountains, hills, tower blocks) and radio blackspots (no coverage from the station transmitter).

ELECTION OF FREQUENCIES AND

MEMORY BANKS

By successive presses on button (R), the NaviDrive changes successively between the memory banks FM1, FM2 and FMast, corresponding to FM frequencies, and to the memory bank MW/LW, corresponding to the AM frequencies.

ANUAL SEARCH

A short press on one of the buttons (H) or (

) will respectively increase or decrease

the displayed frequency. By keeping button (

) or (I) pressed, you will be able to scroll through the waveband. Scrolling stops as soon as a station is found. NaviDrive remains on the frequency displayed.

ANUAL PRE-SETTING

Select the waveband and memory bank required using button (

Select a station using either automatic or manual search.

Keep pressing for more than two seconds on one of the preselection buttons"

" to "6" (W).

A window opens on the screen, the station is memorised as it is displayed on the memory number you have given it.

Page 29

RADIO SOURCE

EARCH FOR A STATION IN A SORTED

LIST

To search for a station in a sorted list, your installation periodically updates the list of the stations received around your vehicle. It shows you what stations are available, first in alphabetical order, then by frequency in ascending order if the names are not known.

To access this list, press on (

) and dis-

play the list. This list is updated automatically every

10 minutes. You can update this list at any time by

pressing button (

) and selecting the up-

date.

UTOMATIC SEARCH

A short press on one of the buttons (M) or (

) will tune into higher or lower radio stations respectively, within the chosen waveband.

By keeping button (

) or (N) pressed, you will be able to scroll through the waveband. The scrolling will stop at the first station it finds once the button is released.

You can also do this by means of buttons (

) and (3) at the steering wheel.

If NaviDrive did not manage to capture a station on a frequency known to you (reception very weak), you can perform a manual search for this station.

UNING SENSITIVITY

Automatic searches can be carried out according to two levels of sensitivity:

•

To capture the most powerful transmitters, choose the local search mode "

" (default option).

•

To capture the weakest or most distant transmitters, choose the sensitive search mode "

Search for a station is done first in "LO" (local) sensitivity, then in "

" (distant) sensitivity. To search immediately in "

" (distant) sensitivity, press twice in succession on one of the buttons (

) or (N).

UTOMATIC PRE-SETTING OF

STATIONS

UTOSTORE FUNCTION

)

In FM, if you keep pressing for more than two seconds on button (

), your Navi-

Drive will automatically memorise the

strongest transmitters on the FMast memory bank.

NaviDrive memorises the 6 strongest transmitters by deleting the 6 previously memorised.

After the memorisation, NaviDrive goes immediately to memory 1 of the FMast memory bank.

Note:

•

If the traffic information function has been activated (see RDS SYSTEM), the stations offering this facility will be memorised as priority.

•

If it is unable to memorise any new stations, the system will retain the previously memorised stations.

If the system is unable to find 6 stations, the unfilled memory slots will remain unchanged.

Page 30

RADIO SOURCE - RDS SYSTEM

ECALL OF PRE-SET STATIONS

A short press on one of the preselection buttons "

" to "6" (W) recalls the corre-

sponding memorised station. If an RDS station is selected, the station's

frequency will appear on the display a few seconds before the station's name.

For RDS stations, recall a station may prompt a search of the frequency corresponding to the region where you are located.

This operation can also be performed using control (

) at the steering wheel.

SING THE

RDS (

RADIO DATA

SYSTEM) FUNCTION ON THE

WAVEBAND

The majority of FM radio stations use the RDS system.

This system permit these stations to transmit non-audible data in addition to the broadcasting of their programmes.

The data provides access to various functions described in this chapter, such as: intermittent traffic information flashes, display of the station name and automatic station scanning.

RDS enables you to continue listening to your chosen radio station, regardless of the different frequencies it uses in the regions through which you are travelling.

CANNING FOR

RDS

STATIONS

NaviDrive keeps the best possible reception.

It continuously looks for any other frequencies on which the selected radio station is broadcast, automatically choosing the frequency offering the best reception (if the station broadcasts on more than one transmitter or frequency).

Activation or deactivation of the function can be accessed via the main "

AUDIO

menu or with a short press on (

The display will indicate:

•"RDS

", if the function is active and

available for the station chosen.

•"RDS

" barred on the monochrome dis-

play or "

RDS

" shaded on the colour display, when the function is active but not available on the station.

If the station you have selected does not broadcast on different frequencies in the areas in which you are travelling, it is possible to deactivate the automatic RDS transmission scanning function.

EGIONAL SEARCH MODE

Some stations when they are organised in a network in the different regions that they serve, transmit programmes that are different at certain times and the same at other times.

It is possible to search:

•

Either for a regional station only.

•

Or across the whole network in order to find a different programme.

Activation or deactivation of the function can be accessed via the main "

AUDIO

menu or with a long press on (

Note:

•

If the function is active, NaviDrive will not change from one regional station to another.

•

If the function is non-active, NaviDrive will choose the strongest frequency of different stations.

Page 31

RDS SYSTEM

TRAFFIC INFORMATION (TRAFFIC

ANNOUNCEMENTS

)

Some stations allow broadcasting of these messages thanks to the "

" func-

tion. You can activate this function by pressing

on button "

TA/PTY

" (S).

Your system allows you to receive traffic information flashes from an FM station which broadcasts them, even though you are listening to another radio programme not itself providing traffic information, or to another audio source.

The display will indicate "

" if the function is active and the station is compatible with these messages ; "

" will be barred on the monochrome display and shaded on the colour display, if the station is not compatible.

While traffic announcements are being broadcast, the original radio programme, or audio source being played, is paused. When the messages are finished, your NaviDrive will revert automatically to the musical programme originally being listened to.

Note:

•

You should be in FM wave band.

•

During station search phases or automatic memorisation phases, if the "

" function is active, the transmitters that are compatible with the broadcasting of these messages will be captured or memorised first.

•

The station being listened to should indicate via the RDS system that it broadcasts traffic information.

•

Stations organised in a network (EON) have regional transmitters sending their own programmes: while listening to one of these stations the system will switch automatically to any station on the network that is broadcasting traffic information.

During the broadcast of a message you can stop listening to it by pressing the "

TA/PTY

" button (S), the "TA" function

remains active.

OUND VOLUME ADJUSTMENT FOR

TRAFFIC INFORMATION

The sound volume for traffic information operates separately from that for the rest of the system, and can be adjusted independently.

Rotate button (

) while a traffic informa-

tion message is being broadcast. This volume adjustment is memorised.

ADIO TEXT VIA CONTEXTUAL MENU

If you are in radio source, a press on the control (

) lets you call up the Radio con-

textual menu to select "

Reading of Ra-

dio Text

" (information broadcast by the station about the programme being listened to) (for example : name of singer, title of song, etc.).

Page 32

RDS SYSTEM

ELECTING A PROGRAMME TYPE

Certain stations allow you to choose to listen to a particular type of programme selected from the available list, for example as below:

Press for more than two seconds on the "

TA/PTY

" button (S).

Rotate control (

) to select the required

programme type.

EARCHING FOR A STATION BROADCASTING THIS PROGRAMME TYPE

Once you have selected the programme type, validate to start a search.

NaviDrive will settle on the first transmitter broadcasting this type of programme.

If none can be found, the system will return to the station it was originally tuned to, and will quit the PTY function.

PRE-

SETTING A STATION BROADCASTING THIS PROGRAMME TYPE

Search to select a station. While it is broadcasting, keep one of the

pre-selection buttons "

" to "6" (W)

pressed for more than two seconds. To recall the pre-set programme type,

press the corresponding button.

UITTING THE

PTY

FUNCTION

To quit this function, press on the "

TA/PTY

" button (S) for more than two seconds, then NaviDrive will revert to normal mode.

NEWS SCIENCE

CURRENT AFFAIRS VARIOUS

SERVICES POP MUSIC

SPORT ROCK MUSIC

EDUCATION FOLK MUSIC

FICTION LIGHT MUSIC

CULTURE OTHER MUSIC WEATHER LEISURE ECONOMY JAZZ CHILDREN COUNTRY

SOCIAL AFFAIRS NATIONAL

RELIGION OLD FAVOURITES

DISCUSSION TRADITIONAL

TRAVEL DOCUMENTARY

Page 33

CD SOURCE

AFETY PRECAUTIONS

Do not use the CD changer if the interior temperature is higher than +60°C or lower than -10°C.

If the temperature becomes too high, an automatic safety device will prevent the CD changer from working until an acceptable temperature is restored.

ANDLING COMPACT DISCS

Do not drop them. Store the CDs so that they are kept of dust. Avoid touching the disc surface as any scratches may adversely affect the sound quality. Do not attach any stickers to the discs. Do not write on them. Do not use damaged or deformed discs. Do not expose them to heat or direct sunlight.

Note:

some cut CDs cannot be read by your equipment (quality, speed of recording, etc.).

If the surface of the compact disc is dirty, it can be wiped with a soft, clean cloth. Always wipe from the centre of the disc outwards.

ELECTING

SOURCE

After inserting a CD, with the printed side facing upwards, the player will start playing the CD automatically.

If there is a CD already inserted, press on button (

) until you have the source you

require. You can also do this by means of control

(

) at the steering wheel.

Remark:

•

Before inserting a CD, check that no CD is already there, with a press on (

•

If the navigation CD-ROM is inserted, it is not possible to listen to a CD

in CD

source

JECTING A

Press on button (A) to eject the CD, the NaviDrive changes automatically to radio source. If the CD is not removed within 10 to 15 seconds of being ejected, it will automatically be taken back into the CD player, although it will not be played.

AST FORWARD AND RAPID REVERSE

WITH ACCELERATED SOUND

To move swiftly through the CD, press and keep pressed button (

) or (N), respectively for fast forward or rapid reverse with accelerated sound. Play resumes as normal when the button is released.

Page 34

CD SOURCE

SOURCE CONTEXTUAL MENU

If you are in CD source, a press on control (

) allows you to call up the contextual menu, for activating or deactivating the following functions:

•

Playback of the start of each track.

•

Random playback.

•

Programming of a sequence for playback of tracks.

•

List of tracks.

ELECTING A TRACK

Press button (M) once to play the next track. Press button (

) once to return to the beginning of the track currently being played, press a second time to go back to the start of the previous track. Press the buttons successively to skip several tracks at a time. You can display the list of tracks by pressing on control (

) then select the

track with a press on (

) or (I).

You can also do this by means of the controls (

) and (3) at the steering wheel.

LAYBACK OF

CD MP3

After inserting a CD MP3, the playback of the first song of the first CD-cover commences. You can select the track you wish to listen to via (

) or (N), or the

desired CD-cover via (

) or (I).

If CD MP3 is already inserted, press on button (

) until you reach the source re-

quired.

Remark:

if the navigation CD is present,

it is not possible to listen to a CD MP3

CD source

ELECTION OF THE

CD-

COVER

You can display the list of CD-covers by pressing on (

) then select the CD-cover

with a press on (

) or (I).

MP3

CONTEXTUAL MENU

When you are in MP3 source, a press on the control (

) allows you to activate or

deactivate the following functions:

•

Playback of the start of each CD track.

•

Random playback.

•

Repetition of tracks.

•

List of CD-covers.

This equipment enables you to listen to music which is usually rights-protected according to national and international conventions. Please consult these and respect them.

This equipment is MP3-compatible in accordance with ISO 9660 and formats MP3, MPEG 1, MPEG 2 and MPEG 2.5 layer 3. It can handle transmission speeds of 32 to 320 kbits/s and playback of 8 to 48 kHz.

Page 35

CD CHANGER SOURCE

CD C

HANGER

This equipment, if present, comprises: a CD changer (

), located in the vehicle glovebox, with a magazine holding 6 CDs.

NSERT/REMOVE A

1 Remove the magazine from the CD

changer

- Open the sliding door of the changer.

- Press on the "

EJECT

" button to eject

the magazine partially.

- Remove it carefully.

- Close the sliding door.

2 Remove a compartment

Take out just one drawer at a time.

3 Insert/remove a CD

- Insert a single CD, printed side upwards. Otherwise the CD changer will not operate.

- Pull out the CD by pulling on the part that is showing.

4 Reposition the compartment

Refit the drawer by pushing it into the magazine. Do not push directly on the CD.

5 Repositioning the magazine

- Open the sliding door.

- Hold the magazine, narrow side towards the opening of the CD changer.

- Push it gently into the aperture of the changer until there is a click.

- Reclose the sliding door to prevent entry of dust or of foreign bodies.

For handling of CDs and user precautions, proceed as for CD Source (page 31).

ELECTING

CHANGER SOURCE

Press successively on button (B), until the desired source is obtained.

You can also do this by means of control (

) at the steering wheel.

ELECTING A

Press on one of the preselection buttons (

) "1" to "6" to choose the CD that you wish to listen to. Press button (

) to play the previous CD,

or button (

) to play the next CD. The CD will start to play automatically. This operation can also be performed using control (

) at the steering wheel. After each change of source, on return to CD changer source, playback will resume at the same point where it had been interrupted.

AST FORWARD AND RAPID REVERSE

WITH ACCELERATED SOUND

To move swiftly through the CD, press and keep pressed button (

) or (N), respectively for fast forward or rapid reverse with accelerated sound. Play resumes as normal when the button is released.

ONTEXTUAL MENU

If you are in CD source, a press on control (

) allows you to call up the contextual menu, for activating or deactivating the following functions:

•

Random playback.

•

Playback of the start of each track.

•

Repetition of the current CD.

•

Display of the list of tracks on the CD.

ELECTING A TRACK

Press button (M) once to play the next track.

Press button (

) once to return to the beginning of the track currently being played, press a second time to go back to the start of the previous track.

Press the buttons successively to skip several tracks at a time.

You can display the list of the tracks on the CD currently being played by pressing on button (

) then select the track

with a press on (

) or (I).

You can also do this by means of the controls (

) and (3) at the steering wheel.

Page 36

TRIP COMPUTER

RIP COMPUTER MAIN MENU

Press on (P) then, using control (G), select the TRIP COMPUTER icon and validate to have access to the following choices:

•

Trip computer configuration.

•

Diagnosis.

ONTEXTUAL MENU

When any type of trip computer information is visible on the multifunction screen, a press on the control (

) gives you direct

access to the functions:

•

Log of alerts.

•

Distance to destination.

RIP COMPUTER CONFIGURATION

This menu allows you to:

•

Enter a distance to a destination

, if no guidance has been activated (otherwise this information is given by the navigation system.

•

Modify the units

(°C or °F, km and li-

tres or miles and gallons).

IAGNOSIS

This menu allows you to:

•

Display the log of alerts.

This gives you a list of the most recent alerts which have been signalled to you, by a message on the screen, whether or not accompanied by the lighting of one of the alert warning lamps.

•

Display the level of charge of the system back-up battery

. The latter enables you to make an emergency call should there be a disconnection of the vehicle's main battery.

•

Display the status of the GPS coverage.

This enables you to see how many satellites are available, as well as the status of the location of your vehicle.

Remarks:

The back-up battery has a life of 4 years. It must be disposed of by a specialist operator, never thrown into the public refuse. National regulations should be consulted and complied with.

Page 37

DIRECTORY

When they are created, the files are stored in the current directory, notably for use in voice commands.

OICE LABEL

You can record a voice label linked to a file by selecting and validating the icon "

", then pronouncing the voice label 2

times. Next, the voice label can be used in voice

commands for the telephone (say "

call

" then the voice label) or for navigation (say "

guide to

" then the voice label), provided that the address entered in the file has been entered in conjunction with the navigation CD-ROM and is in the current directory.

ILE TRANSFER

This menu enables you to:

•

Exchange by infrared

between the NaviDrive and nomad equipment by means of an infrared port, of all or some of the files in the current directory.

•

Exchange between the SIM card

(inserted in the NaviDrive) and the NaviDrive, of all or only one of the files it contains.

XCHANGE OF A FILE BY INFRARED

After selection of the menu "

File trans-

fer

" and of the direction of this transfer, you must initiate the exchange by showing simultaneously in front of the infrared port the nomad equipment on which you have started the transfer (refer to the instructions for this equipment). A message confirms to you that the exchange can gone through correctly.

XCHANGE WITH THE

SIM

CARD

This menu enables you to:

•

To send all the files to the SIM card, from the current directory of your NaviDrive.

•

To send one file to the SIM card, from the current directory of your NaviDrive.

•

To receive all the files from the SIM card into the current directory of your NaviDrive.

•

To receive one file from the SIM card into the current directory of your NaviDrive.

Reminder:

when you transfer a file from the NaviDrive to the SIM card, only the first number on the file is recorded.

Remark:

The SIM card represents an independent source of information: the telephone nos. can be consulted in the current directory.

Page 39

TELEPHONE AND TELEMATIC SERVICES

HAT IS THE TELEPHONE FUNCTION

This function consists of a GSM telephone incorporated in NaviDrive. It has a "

hands free

" function, provided by a microphone located in the front interior lamp and controls at the steering wheel giving you access to most of the functions.

Remark:

As with any mobile telephone, your vehicle telephone operates on the existing cellular and terrestrial networks, and so a connection cannot be guaranteed on every occasion.

Priority on safety:

Do not allow yourself to be distracted while you are driving. Observe the national legislation currently in force. We recommend the driver to stop the vehicle to continue a telephone conversation or to perform certain actions (selecting a number manually, for example).

NSERTING AND RETRIEVING THE

SIM

CARD

Open the slot (L) by pressing with a ballpoint on the opening situated just above it (

L’

). Insert your SIM card into the aperture as indicated, then close the aperture again.

Remarks:

•

You should only remove the SIM card after NaviDrive has stopped (key in position S (Steering lock) and display switched off).

•

If you have a twin card, from first installation or to update your directory you have to insert the SIM card of your mobile telephone then transfer its informa-

tion into the directory of the NaviDrive see the Directory main menu.

NTERING THE

CODE

NaviDrive can definitively memorise the

code of a SIM card. Having memorised it on the first entry, the system will not require it to be entered again.

Enter your

code using the buttons on

the keypad (

), then validate by pressing

control (

) or alternatively button (#) on

the keypad (

Remark:

•

After three errors in trying to enter the code, your telephone will be blocked. You will then have to enter your deblocking code (PUK code).

The PUK code is supplied with your SIM card by your service provider. The PUK code tolerates 10 successive errors. After this the SIM card will be un-usable.

Remark:

•

All the essential types of information associated with a "

mobile telephone

" can be viewed on the multifunction screen.

ULTIFUNCTION SCREEN DISPLAY

When you are not engaged on a telephone call, the display tells you if you have voice messages or text messages (SMS) incoming, the length of connection since the last reset to zero and the status of your telephone.

During a telephone call, it tells you the time that has elapsed since the start of the call, as well as the number (if this option and service is available) or the name (if recorded in the directory) of the person you are speaking with, and the status of your telephone.

Page 40

TELEPHONE AND TELEMATIC SERVICES

SING THE KEYPAD

Press successively on any one of the buttons (

) of the keypad to:

•

Select a name commencing with the letter chosen, either in the directory or the SIM card.

•

Scroll down the characters, until you reach the one you need.

AIN MENU FOR TELEPHONE AND

ELEMATIC SERVICES

Press on (P) then use the control (G) to select the TELEPHONE AND TELEMATIC SERVICES icon and validate to have access to the following choices:

•

Call.

•

Services

, for access to NaviDrive and

CITROËN services.

•

Telephone functions

, for adjustment

of all the telephone functions.

•

Text messages (SMS)

, to enable you to manage all the text messaging functions (SMS).

ONTEXTUAL MENU

Making a call Press on button (

) to display the tele-

phone contextual menu. This menu allows you to:

•

Access the calls list.

•

Enter a number.

•

Access the directory.

•

Access to your voicemail

(messaging

from your GSM operator).

Remark:

A long press on button (5) at the steering wheel brings up a contextual menu with the calls list, the current directory and the voicemail.

[1]

1 or space by short press to enter text (SMS)

[2]

2 or A B C 2 or a b c 2

[3]

3 or D E F 3 or d e f 3

[4]

4 or G H I 4 or g h i 4

[5]

5 or J K L 5 or j k l 5

[6]

6 or M N O 6 or m n o 6

[7]

7 or P Q R S 7 or p q r s 7

[8]

8 or T U V 8 or t u v 8

[9]

9 or W X Y Z 9 or w x y z 9

[0]

To enter text (SMS)

Short press: Space then 0 Long press: Space

In dialling

Short press: 0 Long press: +

[#]

In dialling Short press: #

[]

To enter text (SMS)

Short press: Deletion of the last character Long press:Progressive deletion of the complete line

In dialling

Short press: Long press:Deletion of the last character

Page 41

TELEPHONE AND TELEMATIC SERVICES

ALL A NUMBER

To call a number, carry out one of the following actions:

•

Select "

Call

" in the menu TELEPHONE AND TELEMATIC SERVICES then compose the number with the keyboard (

•

Press on button (D) to start the dialling, or select the function "

•

Say "

Call

" then the voice label from a

file that includes a telephone number.

•

Use the current directory

A long press on button (5) at the steering wheel brings up a contextual menu with the calls list, the current directory and the voicemail.

•

With Telephone and Telematic Services displayed, press on button (

) to have

access to the calls list.

AKING A CALL TO A STORED NUMBER

Select the function giving you access to your directory or to the calls list (the 20 most recent incoming or outgoing calls). These only figure in the calls list if the person calling does not withhold the number.

After selecting the number you wish to call, press on either button (

) or control

(

) to connect the call.

Reminder:

In the directory there are two groups of memorised numbers accessible, one from the current directory of NaviDrive and one from the SIM card. The numbers contained in the latter are preceded by a "SIM card" symbol.

ECEIVING A CALL

When receiving a call, announced by a ringing tone, you can choose:

•

To accept the call by pressing control (

) or control (5) at the steering wheel

or validating the function "

YES

" in the

menu "

Respond

•

To refuse the call by pressing button (

) or by selecting and validating the

function "

" in the menu "

Respond

If you have accepted the call, when you finish the call press button (

), or control

(

) at the steering wheel, to end the call.

Page 42

TELEPHONE AND TELEMATIC SERVICES

THE

SERVICES

This menu, depending on the contracts subscribed to, allows you to choose one of the following services:

•

CITROËN on line

, giving you direct contact with the Customer Contact Centre CITROËN and access to the services on offer (such a call will be overridden if an emergency or breakdown call is made).

•

CITROËN Assistance

, giving you direct contact with the Call Centre handling the CITROËN breakdown service, for the fastest possible recovery.

You have a few seconds to cancel this call once it has been made. This call can also be made by giving a long press on button (

). While making an assistance call, it is impossible to make other calls apart from an emergency call. If you have subscribed to a specific Services contract, your GPS position is relayed to the assistance centre.

•

NaviDrive Services

, for access to the list of telematic services from CITROËN (e.g.: Customer Service, choice of a destination, fuel consumption monitoring, sport, current affairs, finance, weather, horoscope, travel, games, etc.) depending on availability.

•

Messages received

, messages relating to the benefits of your specific Service Contract.

MERGENCY CALL

In the absence of a subscription to the CITROËN Emergency service, the

SOS

button (V) is configured for making calls to the number

112

, being a standard number reserved by the European GSM network for emergency calls.

For this call, a valid SIM card must be present, permitting the sending and receiving of telephone calls and SMS messages. You also need to be in an area that has GSM coverage.

WIN

SIM

CARD

For better peace of mind, offers of twin SIM cards (available in some countries and from some service operators) give you two SIM cards with a standard price, a single number and single messaging. Calls arrive as priority on your principal line. In the absence of a reply, the calls are transferred automatically to the equipment that is using the second SIM card.

Note:

•

This transfer necessitates a callback (consult your telephone service operator).

•

For optimum operation of services, it may be necessary to insert the principal SIM card into the NaviDrive.

If you have a special Service Contract, refer to the general conditions described in the contract.

A green diode flashes on the NaviDrive control panel as soon as you commence the emergency call procedure, then it comes on permanently when the call is picked up by the emergency services.

The same warning lamp flashes or illuminates permanently in orange should it detect a malfunction in the telephone's emergency calls function.

Remarks:

•

If you are subscribed to a Service Contract, the services can then be localised by means of GPS. You can check the activation of this localisation wih a long press on (

) followed by selection of "Configuration of services". If the emergency services appear activated, you can then be localised. Otherwise, you are not localised.

•

If the emergency services appear activated but you have not subscribed to a Services contract and do not wish to be localised, make contact with your usual CITROËN dealer.

Page 43

TELEPHONE AND TELEMATIC SERVICES

ELEPHONE FUNCTIONS

This menu gives you access to the following functions:

•

Network

, to select the network search mode and to view the networks available.

•

Length of calls

, to consult the call

length counters and the reset to zero.

•

Managing the SIM card

, for modifying the PIN code and deleting the list of calls and SMS messages.

•

Call options

, for configuring calls by whether or not you withhold your number, for hanging up automatically after X rings, for defining ring tones and callback for SMS and for deleting the calls list.

EXT MESSAGING

(SMS)

This menu allows you to read, send, and edit SMS messages and to delete the list of them.

Normally, your server centre number is configured automatically depending on your network operator.

To modify it, select the menu "

Telephone

and Telematic Services

", then "

Text-

messages (SMS)

" and "

Number of

server centre

" for entering and recording

the latter. Any text message composed prior to the

recording of this number, will be deleted and not sent.

ENDING A TEXT MESSAGE

(SMS)

In the menu "

Text-messages (SMS)

validate the function "

Production of an

SMS

", and enter your SMS via the key-

pad. You can then:

•

Either record the message for later use by vaidating in the "

" function.

•

Or send it by validating in the "

Send

function.

Then compose the destination number or select it either in the directory or in the calls list. Then send it.

Page 44

TELEPHONE AND TELEMATIC SERVICES

ECEIVING AN

SMS

A sound signal (if the ringing option for SMS messages is active) and a superimposed window tell you of the arrival of an SMS.

You can then:

•

Either read the SMS by selecting and validating "

YES

•

Or defer reading it by selecting and validating "

" or by pressing button (J) or by waiting for the superimposed window to disappear.

Note:

•

SMS messages that have been stored or deferred can be consulted at any time.

To gain access, press on button (

select "

Telephone and Telematic

Services

" then the function "

SMS text-

messages

and validate the function

Reading of SMS messages re-

ceived

". Then move in the list to be able to select and validate the message you wish to read. The number of SMS messages unread is indicated.

•

If the voice synthesiser function is active, as soon as the message is displayed, it will be read out by the voice synthesiser.

EPLYING TO AN

SMS

After reading a text message, you can:

•

Reply directly to the sender by selecting "

Respond

". A screen appears auto-

matically to return your message.

•

Record the number of the SMS sender into your current directory, by selecting "

Record

Page 45

CONFIGURATION

ONFIGURATION MAIN MENU

Press on (P) then use the control (G) to select the CONFIGURATION icon and validate to access the following choices:

•

Choose colours

(colour screen), to choose one of the colours available for the display.

•

Adjust brightness

, to adjust bright-

ness and sharpness and video display.

•

Sound

, for adjusting the voice synthesis (for the feminine/masculine voice parameter), and activation/deactivation of voice commands and audio/video auxiliary input.

•

International parameters

, for setting the date and time (12 or 24 hour format, adjusting the minutes on GPS) and adjusting the units (metric or imperial system).

•

Choose language

, to choose the language for the voice synthesiser and displays.

Page 46

MAP

ENERAL

When the map is displayed, you can use either of two functioning modes: The mode "

Follow vehicle on map

", which shows you the movement of the vehicle on the map, and the mode "

Select -

Move on map

", which allows you to de-

fine a particular spot by moving a pointer. The map can be displayed either on the

right of the screen as in the other applications, or full screen enlarged.

Remarks:

•

By default, the map displays in mode "

Follow vehicle on map

•

The change of the mode "

Follow vehi-

cle on map

" to the mode "

Move on

map

" is made via the Map main menu or using the Navigation contextual menu by means of a press on the control (

•

The change the other way is made using the Contextual Menu for the mode "

Move on map

ODE

OLLOW VEHICLE ON MAP

This mode enables you to view the vehicle centred on the map, whether or not guidance is active.

The map has a zoom function which can alter the scale of the map. To vary the scale between 50 m / cm to 200 km / cm, rotate control (

Remark:

•

In this mode, a validation on control (G) brings up the display of the Navigation contextual menu.

•

The more precise scale allows you to see one-way systems.

ODE

ELECT

- M

OVE ON MAP

This mode enables you:

•

To move on the map in all four directions: North, South, East, West via buttons (

), (M), (I) and (N). The movement can be speeded up by keeping the appropriate button pressed down.

•

To select a point on the map by moving the latter in order, after a press on (

), to be guided towards this point, to have information on it, or to memorise it.

Remarks:

•

In this mode, the zoom is also available and the map is always full screen, oriented to North.

•

In this mode, a validation on the control (

) displays the Map contextual menu.

•

In this mode, the symbol for the nearest Point of Interest is displayed.

Page 47

MAP

MAIN MENU

Press on (P) then use the control (G) to select the Map icon and validate to have access to the following choices:

•

Move the map

, to change to the mode

Select - Move on map

•

Orientation of the map

, for orienting the map either to the direction the vehicle is travelling in, or to North.

•

Centre around the vehicle

, to recentre the map on the vehicle if it no longer appears on the map.

•

Details of the map

, for selecting the points of interest to be displayed using symbols on the map (see next page).

•

Memorise the current position

, to display the panel for entering a label for recording the vehicle's current position in a file in the current directory.

Tip:

Among the details of the map, you can select (depending on the country where the vehicle was marketed and on the availability of the service) the display of radar zones or high-accident zones.

ONTEXTUAL MENU

This contextual menu displays in mode "

Select - Move on map

•

Information on this location

, to view the information on the point of the map selected by the cursor.

•

Choose as destination/stage

, lets you select the location which is pinpointed as a destination or stage if a guidance is already in progress.

•

Memorise this location

, to memorise the point selected by the cursor in a file in the current directory.

•

Exit map mode

, changes the map

back to the mode "

Follow vehicle on

map

Page 48

SYMBOLS FOR CENTRES OF INTEREST

Public authorities and security Sports and open air centres

City hall, City centre Sports centres and complexes

Universities, Colleges, Schools Golf courses

Hospital Skating, Bowling

Hotels, restaurants, business and retail parks

Winter sports

Hotels Parks, gardens

Restaurants Public attractions

Vineyards

Transport and motoring

Supermakets, Shopping malls Airports, flying clubs

Business centre Rail stations, bus stations

Culture, tourism, entertainment

Car hire

Culture, museums and theatres Car parks, rest areas

Tourism, historic monuments Ferry terminals, port areas

Casinos and night life Service stations, garages

Cinemas

Radar zones/High-accident zones (display depends on the country where the vehicle was marketed and on the availability of the service)

Shows, exhibitions CITROËN Dealer or Repairer

Page 49

VIDEO

IDEO CONTEXTUAL MENU

The contextual menu gives you access to the following functions:

•

Display format.

This allows you to select the display format: 16/9 or 4/3.

•

Brightness adjustment.

•

Contrast adjustment.

•

Deactivate Video mode.

IDEO MAIN MENU

Press on (P) then use the control (G) to select the VIDEO icon and validate to have access to the following choices:

•

Activate/deactivate Video mode.

•

Video parameters.

This application is displayed full screen.

Remarks:

•

If a piece of equipment is connected to accessory Video-Audio sockets (located in the glovebox) then the activation of Video mode cuts the Audio source currently being listened to. You can reactivate any of the other Audio sources with a short press on the "

Source

" but-

ton.

•

It is possible to view the images on equipment that is connected provided that it is emitting a signal and the vehicle is stationary. While the vehicle is moving, only the sound is available.

IDEO PARAMETERS

This menu permits you to choose display formats and to individually adjust brightness, colours and contrast for the Video image.

Page 50

INDEX NAVIDRIVE

Address - entry ................................

20-21

Address - memorisation...................

20-35

Assistance .......................................

Audio ...............................................

Auxiliary input (activation)................

Calls list...........................................

39-40

CD - CD changer.............................

31 33

CD, CD changer and radio sources .......

26 28 31-32 33

CD-ROM..........................................

Centre of interest.............................

21-46

CITROËN Assistance......................

Contextual menu ............................. 19-26

31-32 33-37 45-47

Destination selected ........................

18-20

Directory file.....................................

35-36

Directory ..........................................

35-36

Display.............................................

Diversion (modification of itinerary)........

19-22

Exchange between Directory and

SIM card ..........................................

Filtering TMC incidents.................... 24

Guidance criteria ..............................

Guidance options .............................

Guidance.......................................... 18-19

Infrared.............................................

Keypad.............................................

Last calls ..........................................

Last destinations ..............................

20 22

List of radio stations available..........

Location - memorisation...................

Location - point on map....................

Log of alerts......................................

Main Menu........................................

Map - display - orientation................

44-45

Map - traffic information....................

Memorising a radio station ...............

Memorising the PIN code.................

MP3..................................................

Navigation ........................................

18 22

Notebook of contacts and addresses ....

35-36

RDS system .....................................

28 30

RDS-TA Traffic Information..............

29-30

RDS-TMC Traffic Information........... 22 24

Scale of map....................................

SIM card...........................................

36-37

SMS ................................................. 38-41

Telephone and Telematic Services .......

Telephone call..................................

38-39

Text-Message (SMS) .......................

41-42

Video................................................

Voice commands .............................

13 17

Voice label on a file..........................

36-39

Voice volume adjustments ...............

18-43

Page 51

The descriptions and data in this guide are given without obligation.

AUTOMOBILES CITROËN reserves the right to modify its models and associated equipment without necessarily being

bound to update the present handbook.

Création COMIDOC - Automobiles CITROËN - RCS PARIS 642 050 199 - Edition ALTAVIA/PRODITY - Imp. en UE

Page 52

ART-V3-GB-45/0

Edition 07/2005

CITROEN NAVIDRIVE - XSARA PICASSO, C8 NaviDrive User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual