
INSTRUCTION MANUAL FOR MIYOTA WATCH MOVEMENT
FEATURES : ANALOG MULTI-HAND QUARTZ WATCH WITH
C) SETTING THE DAY AND TIME (HOUR, 24 HOUR, MINUTE, SECOND)
D) SETTING THE MONTH (BY QUICK OPERATION)
1st POSITION TIME/DAY SETTING (CLOCKWISE)
SETTING THE TIME (HOUR, 24HOUR, MINUTE and SECOND)
C) SETTING THE DAY AND TIME (HOUR, 24 HOUR, MINUTE AND SECOND)
The hour, 24 hour, minute, second and day are set by the same operation.
24HOUR HAND
MONTH DISC
MONTH-ADJUSTMENT
BUTTON
DAY ( OF THE WEEK )
HOUR HAND
SECOND HAND
MINUTE HAND
NORMAL CROWN POSITION
1ST POSITION

Pull the crown out to the 1st position to stop the second hand at 0 (12 o'clock).
Turn the hour/minute hands in a clockwise direction to set a day
In order to set the day, you must advance the hour hand by 24 hours per day.
Do not set the day by turning the crown in counterclockwise direction.
* The day changes somewhere between 0:00a.m. and 5:30a.m. or a little later.
After setting the day, set the hour (and 24hour) and minute hands.
Turn the hour/minute hands in a clockwise direction to set the time.
To ensure time is set accurately, first turn the minute hand 5 minutes ahead of desired
time and then turn back (in a counterclockwise) to the desired time.
After setting the time, use a time signal to synchronize the watch by pushing crown to
the normal position to start the second hand going.
Make sure you have correctly set AM/PM before setting the time.
When the day changes over, it is a.m..
(Day changes over between 0:00a.m. and 5:30a.m. or little later)
Check am./p.m. by the 24hour hand.
D) SETTING THE MONTH (BY QUICK OPERATION)
Each time the month-adjustment button is pushed, the month advances one month at a time.
Be sure to press firmly on the button when making month changes.
The month disc changes around midnight of the 31st..