Cisco Systems SFS 7000 User Manual

Cisco SFS 7000 InfiniBand Server Switch
Quick Start Guide (Topspin 120 Quick Start Guide)
Release 2.2.0 Update 1
Part Number: OL-7723-01
Product ID: 140263
Copyright © 2004 - 2005 Topspin Communications, Inc. All rights reserved.
The Topspin Switched Computing System, Topspin Host Channel Adapter, Topspin Element Manager, and collateral software programs and documentation are subject to and made available only pursuant to the license agreement signed by you and Topspin, Communications, Inc. (or if no signed license agreement exists, the license agreement included with your original media) and may only be used in accordance with the terms of that agreement. Making copies, modifications, or compilation works of the software except as specifically allowed in that agreement is prohibited by law and constitutes a punishable violation of the law. This documentation may not be copied, modified or reduced to any electronic or machine-readable form without Topspin Communication, Inc.'s prior written consent.
As defined in FAR section 2.101, DFAR section 252.227-7014(a)(1) and DFAR section 252.227-7014(a)(5) or otherwise, the collateral software programs provided to you are “commercial items,” “commercial computer software” and/or “commercial computer software documentation.” Consistent with DFAR section 227.7202, FAR section 12.212 and other sections, any use, modification, reproduction, release, performance, display, disclosure or distribution thereof by or for the U.S. Government shall be governed solely by the terms of the license agreement and shall be prohibited except to the extent expressly permitted by the terms of that agreement. Any technical data provided that is not covered by the above provisions shall be deemed “technical data-commercial items” pursuant to DFAR section 227.7015(a) or equivalent. Any use, modification, reproduction, release, performance, display or disclosure of such technical data shall be governed by the terms of DFAR section 227.7015(b) or equivalent.
This documentation may include technical inaccuracies or typographical errors and is subject to correction and other revision without notice. TOPSPIN PROVIDES THIS DOCUMENTATION “AS IS” AND WITHOUT ANY WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states or jurisdictions do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you.
© Copyright 2004 - 2005, Topspin Communications, Inc. All rights reserved. Topspin is a registered trademark and the Topspin logo, TopspinOS, and Topspin Switched Computing System are trademarks of Topspin Communications, Inc. Other company, product, or service names are the property of their respective owners.
Document Version: 2.2.0 Update 1
Part Number: OL-7723-01
Product ID: 140263
January, 2005
Printed in the United States of America.
Regulatory Notices......................................................... v
FCC Statement.............................................................................................................................................v
Safety Information .......................................................................................................................................v
Electrical Cautions.......................................................................................................................... v
General Cautions.......................................................................................................................... vii
Contact Information.................................................................................................................................. vii
Topspin 120 Contents List ............................................ ix
___Accessory Kit....................................................................................................................................... ix
___Serial Cable Kit.................................................................................................................................... ix
___Power Cables ....................................................................................................................................... ix
___Chassis ................................................................................................................................................. ix
Product Registration ..................................................... xi
THANK YOU FOR PURCHASING YOUR TOPSPIN® PRODUCT .................................................... xi
iii
Terms and Conditions of Sale for
Topspin Communications, Inc..................................... xiii
Topspin Limited End User Warranty ........................... xix
Extent of Limited Warranty..................................................................................................................... xix
How to Obtain Warranty Service...............................................................................................................xx
Limitations of Liability..............................................................................................................................xx
Declaration of Conformity ........................................... xxi
1: Topspin 120 Quick Start...................................................... 1
Prepare the Site ............................................................................................................................................1
Mount the Chassis in a Rack........................................................................................................................1
Requirements .................................................................................................................................. 1
Rack Mount Installation.................................................................................................................. 2
Configure Basic Connectivity......................................................................................................................6
Configure and Connect InfiniBand Hosts....................................................................................................7
(Optional) Launch the Chassis Manager....................................................................................................11
Prepare Your Device..................................................................................................................... 11
Launch Chassis Manager .............................................................................................................. 11
(Optional) Install the Element Manager GUI ............................................................................................13
2: Index.................................................................................. 15
iv

Regulatory Notices

FCC Statement

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
v

Safety Information

“Electrical Cautions” on page v
“General Cautions” on page vii

Electrical Cautions

CAUTION: Use only the power cable provided with your Topspin system. Inspect the power cord and determine if it provides the proper plug and is appropriately certified for use with your electrical system. Discard the cord if it is inappropriate for your country’s electrical system and obtain the proper cord, as required by your national electrical codes or ordinances.
vi
CAUTION: Grounding is supplied by the ground-prong on the 3-prong power cable. Do not attach a separate ground cable. Do not use adapter plugs. Do not remove the ground prong from the cable. Ensure the ground connection on the power supply is correct and functioning before applying power to the Topspin system.
CAUTION: Always ground yourself before touching any internal Topspin system component to avoid damage from electrostatic discharge (ESD).
CAUTION: Remove power cables by grasping the cable connector and pulling straight out.If the chassis comes equipped with a power-plug retainer, move the bail wire used to retain the plug to the side before attempting to remove the power plug. The operator must disconnect all power cables before attempting to remove the system from the rack.
CAUTION: The Topspin system contains lithium batteries. Do not attempt to replace or discard these batteries. The batteries may only be serviced by Topspin service personnel.
CAUTION: Observe and follow service markings. Do not service the Topspin system, except as explained in the Topspin documentation supplied with your system. Opening the chassis or removing the enclosure cover exposes you to electrical shock and may damage system components.
If one or more of the following situations occurs, remove power to the Topspin system chassis, and contact your Topspin support representative:
The power cable or power plug is damaged.
The system has been exposed to water.
The system has been dropped or damaged in any way.
The system does not operate correctly after following the installation instructions.
CAUTION: You must ensure the operating environment has adequate air circulation. Keep the Topspin system in a cool, well-ventilated room. Do not block cooling vents. Install filler panels into all unused slots.
CAUTION: Never place your hand inside an empty card or module bay. You should never have cause to place a hand anywhere inside the Topspin chassis. Unused card and module bays should always have a Topspin cover over the bay to ensure proper safety, ventilation, and cooling.
vii

General Cautions

CAUTION: No user is authorized to remove the Topspin system enclosure cover. The internal chassis contains no user-serviceable components. Removing the enclosure cover voids your warranty. See the warranty card for further details regarding the servicing of your chassis.
CAUTION: Opening and/or modifying expansion and system modules may void your warranty. Refer to your warranty to determine access restrictions.
In general
Do not spill food or liquids on your system components.
Protect your Topspin system from sudden power-surges and interruptions by using a surge suppressor, line conditioner, or uninterruptable power supply (UPS).
Place cables appropriately so that they do not obstruct any egress within the data center and they do not block any ventilation inlets or outlets.
Rack mount the Topspin chassis according to the rack manufacturer recommendations.

Contact Information

Table III-1: Customer Contact Information
Address Topspin Communications, Inc.
Telephone, Corporate Headquarters (866) TOPSPIN or (650) 316-3300
Fax (650) 316-3269
Telephone, Technical Support (800) 499-1473
Email, Technical Support support@topspin.com
Web site, Support http://support.topspin.com
515 Ellis St.
Mountain View, CA 94043
viii

Topspin 120 Contents List

The following contents are included with your Topspin 120 product:

___Accessory Kit

___Documentation & CD-ROM Assembly
Topspin 120 Quick Start Guide
Release Notes
___Hardware Kit
2 Topspin 120 rack-mount brackets
12 screws
___Bezel

___Serial Cable Kit

___Serial Cable
Serial cable document
DB-9 connector male to RJ-45
DB-9 connector female to RJ-45
MX-9-1 roll-over cable
___Documents
Located inside serial cable kit package

___Power Cables

Located outside of accessory kit.
two standard

___Chassis

___Power Supply/Cooling Units
1 unit (standard)

Product Registration

THANK YOU FOR PURCHASING YOUR TOPSPIN® PRODUCT

Topspin Communications is pleased that you have selected Topspin for your computing infrastructure. Topspin provides comprehensive customer support resources via telephone and Web access.
Topspin’s Customer Support Website has the latest TopspinOS (IB Switch and I/O Chassis Operating System), Linux and Windows Host Side Drivers, Boot over Infiniband Firmware and technical documentation. Topspin recommends that you download the latest Topspin software and documentation from the Topspin support web site so that you can take full advantage of the latest capabilities.
xi
Registration Benefits
Customers must register on-line to receive the following benefits:
Software updates and downloads
Product warranty support
Customer service and support
Product documentation
Registration Instructions
Please immediately follow the instructions below to register yourself as a Topspin user:
1. Go to http://support.topspin.com
2. Click the “Register Now” link below the customer login prompt
3. Enter at least one of your product serial numbers in the spaces provided. Each serial number must be entered exactly as it appears on the product label, including dashes.
4. Enter your contact information in the spaces provided.
User Name and Password
Once you register, Topspin will provide you with a user name and password to access the secure customer support Web site. You may also contact Topspin customer support at:
xii
Email: support@topspin.com
Phone: (800) 499-1473
Online Help Desk: http://support.topspin.com
Loading...
+ 25 hidden pages