About This Guide
This preface describes who should read the Processor Installation Guide, how it is
organized, and its document conventions.
Cisco documentation and additional literature are available in a CD-ROM package, which
ships withyour product. The Documentation CD-ROM,a memberof theCisco Connection
Family, is updated monthly. Therefore, it might be more up to date than printed
documentation. To order additional copies of the Documentation CD-ROM, contact your
local sales representativeor call customer service. The CD-ROMpackage is available as a
single package or as an annual subscription. You can also access Cisco documentation on
the World Wide Web at http://www.cisco.com, http://www-china.cisco.com, or
http://www-europe.cisco.com.
Documentation Feedback
If you are reading Cisco product documentation on the World Wide Web, you can submit
comments electronically:
1 Click Feedback in the toolbar. 2 Select Documentation. 3 Complete the form, click Submit, and send it to Cisco Systems.
If you are reading printed documentation that contains a response card, you can complete
the card and mail it to Cisco Systems.
We appreciate your comments.
About This Guide xi
Who Should Read This Guide
Who Should Read This Guide
To use this guide, you should be familiar with electronic circuitry and wiring practices and
have experience as an electronic or electromechanical technician.
This guideprovides informationspecific to initialinstallation of theATM switch processor
(ASP) and multiservice switch route processor (MSRP), which are referred to generically
as the processor card. ASP and MSRP are supported in the following systems:
• Catalyst 8510 MSR
• Catalyst 5500 switch
• LightStream 1010 ATM switch
How This Guide Is Organized
The major sections of this guide are as follows:
Chapter 1 Product Overview Describes the processor card features and components.
Chapter 2 Installing the
Appendix A Maintaining the
Appendix B Processor Card
Appendix C Processor Card Cable
Appendix D Translated Safety
xii
Processor Installation Guide
Processor Card
Processor Card
Specifications
and Port Pinouts
Warnings
Describes safety precautions and how to install the
processor card and confirm a successful installation.
Describes the maintenance procedures for the processor
card.
Describes the processor card specifications.
Lists the pinouts for the Ethernet cable connector and
the ports on the processor card.
Lists translations of the warnings that appear in this
guide.
Related Documentation
The processor card is just one component of the Catalyst 8510 MSR, the Catalyst 5500
switch, andthe LightStream 1010 ATM switch.Other components arethe carrier modules,
port adapters, and the main chassis. Refer to the following documents for detailed carrier
module, port adapter, and chassis hardware installation information:
• ATM Port Adapter Installation Guide
• Hardware Installation Guide
• Catalyst 5000 Series Installation Guide
Note The carrier modules are documented in the ATM Port Adapter Installation Guide.
Document Conventions
Command descriptions use the following conventions:
boldface font Commands and keywords are in boldface.
Related Documentation
Notes use the following conventions:
Note Means readertake note. Notes contain helpful suggestions or references to material
not covered in the publication.
Cautions use the following conventions:
Caution Means reader be careful. In this situation, you might do something that could
result in equipment damage or loss of data.
About This Guide xiii
Document Conventions
Warnings use the following conventions:
Warning Thiswarning symbolmeans danger.Youare ina situationthatcould causebodily
injury.Before youwork onany equipment, you must beaware ofthe hazards involved with
electrical circuitry and familiar with standard practices for preventing accidents. To see
translated versions of the warning, refer to the appendix “Translated Safety Warnings.”
Waarschuwing Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie
die lichamelijk letsel kan veroorzaken. Voordat u aan enige apparatuur gaat werken, dient
u zich bewust te zijn vande bij elektrische schakelingen betrokken risico's endient u op de
hoogte te zijn vanstandaard maatregelen om ongelukken te voorkomen.(Voor vertalingen
van de waarschuwingen die in deze publicatie verschijnen, kunt u het aanhangsel
“Translated Safety Warnings” (Vertalingen van veiligheidsvoorschriften) raadplegen.)
Varoitus Tämä varoitusmerkki merkitsee vaaraa. Olet tilanteessa, joka voi johtaa
ruumiinvammaan. Ennen kuin työskentelet minkään laitteiston parissa, ota selvää
sähkökytkentöihin liittyvistä vaaroista ja tavanomaisista onnettomuuksien
ehkäisykeinoista. (Tässä julkaisussa esiintyvien varoitusten käännökset löydät liitteestä
"Translated Safety Warnings" (käännetyt turvallisuutta koskevat varoitukset).
Attention Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une
situation pouvant causer des blessures ou des dommages corporels. Avant de travailler sur
un équipement, soyez conscient des dangers posés par les circuits électriques et
familiarisez-vous avec les procédures couramment utilisées pour éviter les accidents. Pour
obtenir les traductions des mises en garde figurant dans cette publication, veuillez consulter
l’annexe intitulée «Translated Safety Warnings » (Traduction des avis de sécurité).
Warnung Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die
zu einer Körperverletzung führen könnte. Bevor Sie mit der Arbeit an irgendeinem Gerät
beginnen, seien Sie sich der mit elektrischen Stromkreisen verbundenen Gefahren und der
Standardpraktiken zur Vermeidung von Unfällen bewußt. (Übersetzungen der in dieser
Veröffentlichung enthaltenen Warnhinweise finden Sie im Anhang mit dem Titel
“Translated Safety Warnings” (Übersetzung der Warnhinweise).)
Avvertenza Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe
causare infortuni alle persone. Prima di lavorare su qualsiasi apparecchiatura, occorre
conoscere i pericoli relativi ai circuiti elettrici ed essere al corrente delle pratiche standard
per la prevenzione di incidenti. La traduzione delle avvertenze riportate in questa
pubblicazione si trova nell’appendice, “Translated Safety Warnings” (Traduzione delle
avvertenze di sicurezza).
xiv
Processor Installation Guide
Cisco Connection Online
Advarsel Dette varselsymboletbetyr fare. Du befinner deg i en situasjon som kan føretil
personskade.Før duutfører arbeidpå utstyr, mådu vareoppmerksom på defaremomentene
som elektriske kretser innebærer, samt gjøre deg kjent med vanlig praksis når det gjelder å
unngå ulykker. (Hvis du vil se oversettelser av de advarslene som finnes i denne
publikasjonen, kan du se i vedlegget "Translated Safety Warnings" [Oversatte
sikkerhetsadvarsler].)
Aviso Este símbolo de aviso indica perigo. Encontra-se numa situação que lhe poderá
causar danosfísicos. Antes de começar a trabalhar comqualquer equipamento, familiarizese com os perigos relacionados com circuitos eléctricos, e com quaisquer práticas comuns
que possam prevenir possíveis acidentes. (Para ver as traduções dos avisos que constam
desta publicação, consulte o apêndice “Translated Safety Warnings” - “Traduções dos
Avisos de Segurança”).
¡Advertencia! Este símbolo de aviso significa peligro. Existe riesgo para su integridad
física. Antes de manipular cualquierequipo, considerar los riesgos que entraña lacorriente
eléctrica y familiarizarse con los procedimientos estándar de prevención de accidentes.
(Para ver traducciones de las advertencias que aparecen en esta publicación, consultar el
apéndice titulado “Translated Safety Warnings.”)
Varning! Denna varningssymbol signalerar fara. Du befinner dig i en situation som kan
leda till personskada.Innan duutför arbetepå någonutrustning måste du vara medvetenom
farorna med elkretsar och känna till vanligt förfarande för att förebygga skador. (Se
förklaringar av de varningar som förekommer i denna publikation i appendix "Translated
Safety Warnings" [Översatta säkerhetsvarningar].)
Cisco Connection Online
Cisco Connection Online (CCO) is Cisco Systems’ primary, real-time support channel.
Maintenance customers and partners can self-register on CCO to obtain additional
information and services.
Available 24 hours a day, 7 days a week, CCO provides a wealth of standard and valueadded services to Cisco’s customers and business partners. CCO services include product
information, product documentation, software updates, release notes, technical tips, the
Bug Navigator, configuration notes, brochures, descriptions of service offerings, and
download access to public and authorized files.
About This Guide xv
Cisco Connection Online
CCO serves a wide variety of users through two interfaces that are updated and enhanced
simultaneously: a character-based version and a multimedia version that resides on the
World Wide Web (WWW). The character-based CCO supports Zmodem, Kermit,
Xmodem, FTP, and Internet e-mail, and it is excellent for quick access to information over
lower bandwidths. The WWW version of CCO provides richly formatted documents with
photographs, figures, graphics, and video, as well as hyperlinks to related information.
You can access CCO in the following ways:
• WWW: http://www.cisco.com
• WWW: http://www-europe.cisco.com
• WWW: http://www-china.cisco.com
• Telnet: cco.cisco.com
• Modem: From North America, 408 526-8070; from Europe, 33 1 64 46 40 82. Use the
followingterminal settings:VT100 emulation;databits: 8;parity: none; stop bits: 1; and
connection rates up to 28.8 kbps.
Fora copyofCCO’sFrequently AskedQuestions(FAQ), contactcco-help@cisco.com. For
additional information, contact cco-team@cisco.com.
xvi
Processor Installation Guide
Loading...