Cisco Catalyst X6704, Catalyst WS-X6704-10GE, Catalyst WS-X6708-10G-3C, Catalyst WS-X6708-10G-3CXL Datasheet

Page 1

Data Sheet

Cisco Catalyst 6500 Series 10 Gigabit Ethernet Modules

Cisco data center switching delivers relentless velocity: Architecture scalability supports growth in any direction; Operational manageability maximizes service velocity and IT staff productivity; Comprehensive resilience addresses many potential sources of downtime.

Figure 1. Cisco Catalyst 6500 Series 4-Port 10 Gigabit Ethernet Module

Figure 2. Cisco Catalyst 6500 Series 8-Port 10 Gigabit Ethernet Module

PRODUCT OVERVIEW

The Cisco Catalyst 6500 Series has an 8-port 10 Gigabit Ethernet module and a 4-port 10 Gigabit Ethernet module. These modules support pluggable optics to support distances up to 80km over single-mode fiber, 300m over multimode fiber, and 15m over copper. The 8-port 10 Gigabit Ethernet module provides up to 64 10 Gigabit Ethernet ports in a single Catalyst 6500 chassis, ideal for deployment in the aggregation layer of LAN campus and data centers. Both modules are interoperable with the Cisco Catalyst 6500 Series Supervisor Engine 720 and provide 40 Gbps connection to the switch fabric. Building upon the award-winning Catalyst 6500 Series, these 10 Gigabit Ethernet modules are backward compatible with all existing Catalyst 6500 line cards and services modules, enabling service providers and enterprises to offer new Layer 2 through 7 services and network capabilities to increase revenue and user productivity without complete equipment upgrades.

The Cisco Catalyst 6500 Series 10 Gigabit Ethernet modules are designed for deployment in the distribution and core of campus and data center for traffic aggregation or for interbuilding, points of presence (POPs), WAN edge, and MAN connections. These modules support IEEE 802.3ad link aggregation and Cisco EtherChannel® technology for fault-tolerant connectivity and bandwidth scalability of up to 80 Gbps per EtherChannel connection. In addition, they support hardware based quality of service (QoS), access control lists (ACLs), and jumbo frames to enable secure and predictable performance for bandwidth-intensive applications.

Page 2

APPLICATIONS

8-port 10 Gigabit Ethernet module: server aggregation, LAN access uplinks aggregation, and links to and between core, where high-density 10 Gigabit Ethernet is required.

4-port 10 Gigabit Ethernet module: core, interbuilding connections, points of presence (POPs), WAN edge, and MAN connections, where medium to low 10 Gigabit Ethernet density is required.

See 10 Gigabit Ethernet Switching for Enterprises white paper for more details:

http://www.cisco.com/en/US/products/hw/switches/ps708/products_white_paper0900aecd802a648b.shtml

KEY FEATURES AND BENEFITS

Table 1. Cisco Catalyst 6500 Series 10 Gigabit Ethernet Modules Key Features Comparison

Feature WS-X6704-10GE WS-X6708-10G-3C

WS-X6708-10G-3CXL

Ports 4 8 Optics XENPAK X2 Switch fabric connection 40 Gbps

(80 Gbps full duplex)

Forwarding engine Default: centralized forwarding (CFC)

Optional: distributed forwarding with DFC3A, DFC3B, or DFC3BXL

Queues RX: 8q8t

TX: 1p7q8t

Queuing mechanisms Class of service (CoS)-based queue mapping CoS-based queue mapping

Scheduler Deficit Weighted Round Robin (DWRR) DWRR and Shaped Round Robin (SRR) Port buffers 16 MB per port 200 MB per port Jumbo frame support for bridged

and routed packets Maximum port density 32 ports (9-slot chassis) 64 ports (9-slot chassis) Supervisor engines supported Supervisor Engine 720 Supervisor Engine 720 Chassis supported Any Catalyst 6500 E-Series chassis, C6509-NEB-

Slot requirements Can occupy any slot in any Cisco Catalyst 6503-E,

Onboard memory 256 MB default, upgradable to 512 MB or 1 GB 1 GB default

Up to 9216 bytes Up to 9216 bytes

A chassis, non-E-Series chassis with Fan Tray 2, or Cisco 7600 chassis (NEBS compliant: operating temperature up to 55°C)

Not supported in Catalyst 6503 non-E Series chassis

6504-E, 6506, 6506-E, 6509, 6509-E, 6509-NEBA, Cisco 7604, 7607, 7609 chassis; can only occupy slots 9 through 13 in a Cisco Catalyst 6513 or Cisco 7613 chassis

40 Gbps (80 Gbps full duplex)

WS-X6708-10G-3C: equipped with DFC3C for distributed forwarding, supporting 256K routes

WS-X6708-10G-3CXL: equipped with DFC3CXL for distributed forwarding, supporting 1M routes

RX: 8q4t TX: 1p7q4t

Differentiated services code point (DSCP)-based queue mapping

Any Catalyst 6500 E-Series chassis, including 6503-E, 6504-E, 6506-E, 6509-E, and C6509-NEB-A chassis, or the Cisco 7604 and 7609 chassis (NEBS compliant: operating temperature up to 55°C)

Or Non-E-Series chassis with Fan Tray 2, including 6506,

6509, 6513, or the Cisco 7606 and 7613 chassis (nonNEBS compliant: operating temperature up to 40°C)

Not supported in Catalyst 6503 non-E Series chassis Can occupy any slot in any Cisco Catalyst 6503-E, 6504-E,

6506, 6506-E, 6509, 6509-E, 6509-NEB-A, Cisco 7604, 7606, 7609 chassis; can only occupy slots 9 through 13 in a Cisco Catalyst 6513 or Cisco 7613 chassis

Page 3

Table 2. Pluggable Optics for Catalyst 6500 10 Gigabit Ethernet Modules

X2 Product ID

X2-10GB-SR

X2-10GB-LR1 XENPAK-10GB-LR 10GBASE-LR 1310 nm serial 802.3ae 10 km over single-mode fiber X2-10GB-ER1 XENPAK-10GB-ER 10GBASE-ER 1550 nm serial 802.3ae 40 km over single-mode fiber X2-10GB-LX41 XENPAK-10GB-LX4 10GBASE-LX4 WWDM 1310 nm 802.3ae 300 m over 62.5-micron FDDI grade

X2-10GB-CX41 XENPAK-10GB-CX4 10GBASE-CX4 Copper 802.3ak 15 m over 8 pair 100-Ohm

Not available today

Only version -02 of these X2 optics is supported on WS-X6708-10G-3C and WS-X6708-10G-3CXL. See release notes or external Q&A for more details.

Besides CX4, all XENPAKs and X2s have dual SC (female) connectors. CX4 has an Infiniband 4x connector.

To calculate the exact distances that your module will support before installation, see optical specifications in the XENPAK and X2 data sheets.

XENPAK Product ID Transceiver Type2 Wavelength IEEE

XENPAK-10GB-SR 10GBASE-SR

XENPAK-10GB-ZR 10GBASE-ZR 1550 nm serial – 80km over single-mode fiber

DWDM-XENPAK-xx.yy DWDM 32 different

WDM-XENPAK-REC RX only WDM 1530-1565nm – RX only; no TX; 80km over

XENPAK-10GB-LW 10GBASE-LW 1310 nm serial 802.3ae 10 km over single-mode fiber

850 nm serial 802.3ae 26 m over 62.5-micron FDDI grade

wavelengths; C band

Standard

100GHz ITU grid

Maximum Distance/Cable Type3

multimode fiber 33 m over 62.5-micron 200 MHz * km

multimode fiber 66 m over 50-micron 400 MHz * km

multimode fiber 82 m over 50-micron 500 MHz * km

multimode fiber 300 m over 50-micron 2000 MHz * km

multimode fiber

multimode fiber 240 m over 50-micron 400 MHz * km

multimode fiber 300 m over 50-micron 500 MHz * km

multimode fiber

Infiniband cable

32 wavelengths over single strand of single-mode fiber; 80km5

single-mode fiber

The exact distance supported varies according to the number of splices and connectors in a single-mode fiber strand.

Cisco 10GBASE XENPAK Modules data sheet:

http://www.cisco.com/en/US/products/hw/modules/ps5455/products_data_sheet09186a008007cd00.html

Cisco 10GBASE X2 Modules data sheet:

http://www.cisco.com/en/US/products/hw/modules/ps5455/products_data_sheet0900aecd801f92aa.html

Cisco 10GBASE DWDM XENPAK Modules data sheet:

http://www.cisco.com/en/US/products/hw/modules/ps5455/products_data_sheet0900aecd801f9333.html

According to the IEEE 802.3ae standard, requires 5 dB 1550 nm fixed loss attenuator for <20 km; a 5 dB fixed loss attenuator is available as a spare,

part number WS-X6K-5DB-ATT=.

Any passive mux demux can be used with the DWDM XENPAKs. The ONS 15216 Flexlayer filters is one of the options.

Page 4

PRODUCT SPECIFICATIONS

Table 3. Product Specifications

Standard protocols IEEE 802.1d, IEEE 802.1p, IEEE 802.1q, IEEE 802.1s, IEEE 802.1w, IEEE 802.3x, IEEE 802.3ad, IEEE 802.3ae, and

Physical specifications Occupies one slot in the Cisco Catalyst 6500 Series chassis or Cisco 7600 chassis

Environmental conditions

Regulatory compliance Cisco Catalyst 6500 Series 10 Gigabit Ethernet modules, when installed in a system, comply with the following EMI and safety

Network management

IEEE 802.3ak

Dimensions (H x W x D): 1.2 x 14.4 x 16 in. (3.0 x 35.6 x 40.6 cm) Weight:

●

WS-X6708-10G-3C: 13 pounds

●

WS-X6708-10G-3CXL: 13 pounds

●

WS-X6704-10GE with DFC3BXL: 10 pounds

●

WS-X6704-10GE with DFC3B: 9.8 pounds

●

WS-X6704-10GE with CFC: 9 pounds

Operating temperature: Certified for operation: 32° to 104°F (0° to 40°C) Design and tested for operation 32° to 130°F (0 to 55 °C) Storage temperature: -40° to 167°F (-40° to 75°C) Relative humidity: 10 to 90 percent, noncondensing Operating altitude:

●

Certified for operation: 0 to 2000 m (0 to 6500 ft)

●

Designed and tested for operation -60 to 3000 m (-200 to 10000 ft)

standards:

●

UL 60950

●

CSA C22.2 No. 60950

●

EN 60950

●

IEC 60950

●

CE marking

●

AS/NZS 60950

●

FCC Part 15 (CFR 47) Class A

●

VCCI Class A

●

EN55022 Class A

●

EN55024

●

CISPR 22 Class A

●

AS/NZS CISPR 22 Class A

●

ETS 300 386

EHERLIKE-MIB (RFC 1643) IF-MIB (RFC 1573) Bridge MIB (RFC 1493) CISCO-STACK-MIB CISCO-VTP-MIB CISCO-CDP-MIB RMON MIB (RFC 1757) CISCO-PAGP-MIB CISCO-STP-EXTENSIONS-MIB CISCO-VLAN-BRIDGE-MIB CISCO-VLAN-MEMBERSHIP-MIB ENTITY-MIB (RFC 2037) HC-RMON RFC1213-MIB (MIB-II) SMON-MIB

Page 5

Power requirements

Indicators

WS-X6708-10G-3C: 444.36W (10.58A @ 42v) WS-X6708-10G-3CXL: 473.76w (11.28A @ 42V) WS-X6704-10GE with DFC3BXL: 402.36W (9.58A @ 42V) WS-X6704-10GE with DFC3B: 377.16W (8.98A @ 42V) WS-X6704-10GE with DFC3A: 389.76W (9.28A @ 42V) WS-X6704-10GE with CFC: 295.26W (7.03A @ 42V) Go to

http://www.cisco.com/go/powercalculator for easy power consumption calculation

Status: green (operational); red (faulty); orange (module booting) Link: green (port enabled and connected); orange (port disabled); off (port enabled and not connected)

Table 4. Cables for 10GBASE-CX4 Optics

Product ID Product Description

CAB-INF-28G-1= Cisco 1 m CX4 patch cable CAB-INF-28G-5= Cisco 5 m CX4 patch cable CAB-INF-28G-10= Cisco 10 m CX4 patch cable CAB-INF-26G-15= Cisco 15 m CX4 patch cable

ORDERING INFORMATION

Table 5. Product Numbers for Ordering

Product ID Product Description

WS-X6708-10G-3C Cisco Catalyst 6500 8-Port 10 Gigabit Ethernet Module with DFC3C, requires X2 WS-X6708-10G-3CXL Cisco Catalyst 6500 8-Port 10 Gigabit Ethernet Module with DFC3CXL, requires X2 X2-10GB-SR 10GBASE-SR X2 (multimode fiber) X2-10GB-LR 10GBASE-LR X2 (single-mode fiber) X2-10GB-ER 10GBASE-ER X2 (single-mode fiber) X2-10GB-LX4 10GBASE-LX4 X2 (multimode fiber) X2-10GB-CX4 10GBASE-CX4 X2 (copper Infiniband cable) WS-X6704-10GE Cisco Catalyst 6500 4-Port 10 Gigabit Ethernet Module, requires XENPAK WS-F6700-DFC3BXL Distributed Forwarding Card-3BXL Upgrade for WS-X6704-10GE WS-F6700-DFC3B Distributed Forwarding Card-3B Upgrade for WS-X6704-10GE WS-F6700-DFC3A Distributed Forwarding Card-3A Upgrade for WS-X6704-10GE XENPAK-10GB-SR 10GBASE-SR XENPAK (multimode fiber) XENPAK-10GB-LR 10GBASE-LR XENPAK (single-mode fiber) XENPAK-10GB-ER 10GBASE-ER XENPAK (single-mode fiber) XENPAK-10GB-LX4 10GBASE-LX4 XENPAK (multimode fiber) XENPAK-10GB-CX4 10GBASE-CX4 XENPAK (copper Infiniband cable) CAB-INF-28G-1= Cisco 1 m CX4 patch cable for XENPAK-10GB-CX4 CAB-INF-28G-5= Cisco 5 m CX4 patch cable for XENPAK-10GB-CX4 CAB-INF-28G-10= Cisco 10 m CX4 patch cable for XENPAK-10GB-CX4 CAB-INF-26G-15= Cisco 15 m CX4 patch cable for XENPAK-10GB-CX4 XENPAK-10GB-ZR 10GBASE-ZR XENPAK (single-mode fiber) DWDM-XENPAK-xx.yy DWDM XENPAK, where xx.yy ranges from 30.33 to 60.61 (single-mode fiber) WDM-XENPAK-REC RX only XENPAK (single-mode fiber) XENPAK-10GB-LW 10GBASE-LW XENPAK (single-mode fiber) (WAN PHY)

Page 6

Note:

WS-X6708-10G-3C ships with WS-X6708-10GE and WS-F6700-DFC3C.

WS-X6708-10G-3CXL ships with WS-X6708-10GE and WS-F6700-DFC3CXL.

The front panel of these modules is labeled as WS-X6708-10GE.

Cisco IOS® Software commands display WS-X6708-10GE with either WS-F6700-DFC3C or WS-F6700-DFC3CXL.

SERVICE AND SUPPORT

Cisco offers a wide range of services programs to accelerate customer success. These innovative services programs are delivered through a unique combination of people, processes, tools, and partners, resulting in high levels of customer satisfaction. Cisco services help you to protect your network investment, optimize network operations, and prepare the network for new applications to extend network intelligence and the power of your business. For more information about Cisco Services, see

Cisco Technical Support Services or

Cisco Advanced Services.

FOR MORE INFORMATION

For more information about Cisco Catalyst 6500 Series Switches, visit http://www.cisco.com/en/US/products/hw/switches/ps708/index.html or contact your local account representative.

Page 7

Printed in USA C78-362060-00 09/06