Cisco Systems 8240 User Manual

APPENDIX

Task List for MGX 8240 Private Line Service Gateway

• Prepare site

• Unpack/Required tools

• Inventory parts

• Check condition

• Physically mount chassis

• Check cable length

• Check air flow ventilation and obstruction

• Check air for contamination, humidity, and temperature

• Mount I/O cards (including IMC I/O)

• Mount PSM cards and IMC card

• Connect bits clocks (if necessary)

• Check voltage

• Install power

• Connect power from chassis to power source

• Check fuses (if used)

• Check voltage

• Check Ready LED

• Configure PC/terminal

• Check software versions and revisions

• Perform FDOS

• Prepare site

• Unpack/Required tools

• Inventory parts

Release 2.2, 78-10084-01, November 1999

Cisco MGX 8240 Hardware Installation Guide

A-1

Task List for Common Interface Module

• Check condition of CIM

• Mount the Common Interface Module in rack

• Check cable length

• Check air flow ventilation and obstruction

• Check for air contamination, humidity, and temperature

• Connect 10Base-T between the Common Interface Module and 1600

• Connect other cables

• Check voltage

• Install power from the Common Interface Module to power source

• Check fuses (if used)

• Configure PC/terminal

• FDOS

Appendix A Task Lists

A-2

Cisco MGX 8240 Hardware Installation Guide

Release 2.2, 78-10084-01, November 1999