Cisco 4G-LTE-ANTM-D User Manual

Overview

Cisco 4G/3G Omnidirectional Dipole Antenna (4G-LTE-ANTM-D)
This document outlines the specifications, describes the Cisco 4G/3G Omnidirectional Dipole Antenna (4G-LTE-ANTM-D), and contains the following sections:
Overview, page 1
Specifications, page 3
Installation Notes, page 9
Safety Instructions, page 11
Obtaining Documentation and Submitting a Service Request, page 11
The 4G-LTE-ANTM-D omnidirectional dipole antenna is designed for indoor use with Cisco 4G and Cisco 3G wireless Integrated Services Routers Generation 2 (ISRs G2) and Enhanced High-Speed WAN Interface Cards (EHWICs).
The 4G-LTE-ANTM-D antenna is marked with a green band and the product ID (PID) to indicate that it supports 4G Long Term Evolution (LTE) networks. It has the following hardware features:
Articulating Joint—It can be rotated 360 degrees and is capable of maneuvering into three stop
positions: 0 degrees, 45 degrees, and 90 degrees.
Male threaded Neill-Concelman (TNC) Connector—It lets you directly mount the antenna to any
Cisco 4G and Cisco 3G wireless Integrated Services Router (ISR) EHWIC with a TNC connector (Figure 1). The threads on the connector must comply with the ANSI 7/16-28 UNEF 2B thread specification.
Americas Headquarters: Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Overview
Cisco 4G/3G Omnidirectional Dipole Antenna (4G-LTE-ANTM-D)
Figure 1 Cisco 4G-LTE-ANTM-D Ominidirectional Dipole Antenna, TNC Connector, and
Articulation Joint
4G-LTE-ANTM-D
7
4
3
6
2
1
245831
1 0 degree position 5 TNC connector
2 45 degree position 6 Green band
3 90 degree position 7 Product ID
4 Articulating joint
Cisco 4G/3G Omnidirectional Dipole Antenna (4G-LTE-ANTM-D)
2
OL-25143-01
Cisco 4G/3G Omnidirectional Dipole Antenna (4G-LTE-ANTM-D)

Specifications

Table 1 Specifications for Cisco 4G-LTE-ANTM-D Antenna
Specification Description
Maximum input power 3W
Connector TNC male
1
VSWR
Characteristic impedance 50 ohm
Antenna base and radome color Cisco Raven Black
Antenna dimensions 9 (L) x 1.2 (W) x 7/16 in (D)
Operating temperature –22° to 158°F (–30° to 70°C)
Operating frequency ranges
Specifications
2.5:1 or less
(229 x 30.5 x 11 mm)
698–806 MHz
824–894 MHz
925–960 MHz
1710–1885 MHz
1920–1980 MHz
2110–2170 MHz
2500–2690 MHz
Maximum Peak Gain 2 dBi
1. VSWR = voltage standing-wave ratio.
OL-25143-01
Cisco 4G/3G Omnidirectional Dipole Antenna (4G-LTE-ANTM-D)
3
Specifications
Cisco 4G/3G Omnidirectional Dipole Antenna (4G-LTE-ANTM-D)
Figure 2 Elevation Cut (AMPS) Phi 0 Degree Plane for Cisco 4G-LTE-ANTM-D
246653
Cisco 4G/3G Omnidirectional Dipole Antenna (4G-LTE-ANTM-D)
4
OL-25143-01
Loading...
+ 8 hidden pages