Cisco Systems 1711, 1712 User Manual

Quick Start Guide

Cisco 1711 & 1712 Security Access Router Cabling and Installation

INCLUDING LICENSE AND WARRANTY

1 Cisco One-Year Limited Hardware Warranty Terms 2 Overview 3 Unpacking the Box 4 Connecting the Router 5 Configuring the Router Using Cisco Router and Security Device Manager 6 Connecting a PC to the Router’s Console Port 7 Verifying Your Installation 8 Obtaining Documentation 9 Documentation Feedback 10 Cisco Product Security Overview 11 Obtaining Technical Assistance 12 Obtaining Additional Publications and Information

Note: For localized versions of these instructions, please refer to the following URLs: French: http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/1700/1711/171xqsg/171Xq_fr.htm German: http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/1700/1711/171xqsg/171Xq_ge.htm Spanish: http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/1700/1711/171xqsg/171Xq_sp.htm Italian: http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/1700/1711/171xqsg/171Xqsg_it.htm

1 Cisco One-Year Limited Hardware Warranty Terms

Please refer to http://www.cisco.com/univercd/cc/td/doc/es_inpck/cetrans.htm for the Warranties and License Agreements page.

There are special terms applicable to your hardware warranty and various services that you can use during the warranty period. Your formal Warranty Statement, including the warranties and license agreements applicable to Cisco software, is available on Cisco.com. Follow these steps to access and download the Cisco Information Packet and your warranty and license agreements from Cisco.com.

1. Launch your browser, and go to this URL:

http://www.cisco.com/univercd/cc/td/doc/es_inpck/cetrans.htm

The Warranties and License Agreements page appears.

2. To read the Cisco Information Packet, follow these steps:

a. Click the Information Packet Number field, and make sure that the part number 78-5235-03A0 is highlighted. b. Select the language in which you would like to read the document. c. Click Go.

The Cisco Limited Warranty and Software License page from the Information Packet appears.

d. Read the document online, or click the PDF icon to download and print the document in Adobe Portable Document

Format (PDF).

Note You must have Adobe Acrobat Reader to view and print PDF files. You can download the reader from Adobe’s

website: http://www.adobe.com

3. To read translated and localized warranty information about your product, follow these steps: a. Enter this part number in the Warranty Document Number field:

78-10747-01C0

b. Select the language in which you would like to view the document. c. Click Go.

The Cisco warranty page appears.

d. Read the document online, or click the PDF icon to download and print the document in Adobe Portable Document

Format (PDF). You can also contact the Cisco service and support website for assistance:

http://www.cisco.com/public/Support_root.shtml.

Duration of Hardware Warranty

One (1) Year

Replacement, Repair, or Refund Policy for Hardware

Cisco or its service center will use commercially reasonable efforts to ship a replacement part within ten (10) working days after receipt of a Return Materials Authorization (RMA) request. Actual delivery times can vary, depending on the customer location.

Cisco reserves the right to refund the purchase price as its exclusive warranty remedy.

To Receive a Return Materials Authorization (RMA) Number

Contact the companyfromwhom you purchased the product. If you purchased the product directly from Cisco, contact your Cisco Sales and Service Representative.

Complete the information below, and keep it for reference.

Company product purchased from Company telephone number Product model number Product serial number Maintenance contract number

2 Overview

This document describes the steps for installing your Cisco 1711 or Cisco 1712 Security Access router.

The Cisco 1711 Security Access router is a fixed configuration router that includes a 1-port analog modem card (WIC-1-AM) that is installed in the WAN interface card (WIC) slot 1. The Cisco 1711 Security Access router alsoincludes an integrated4-port 10/100-Mbps Ethernet switch in WIC slot 0, an onboard Fast Ethernet port external interface, and a Virtual Private Network (VPN) module in the router’s internal slot. The analog modem WIC and the switch port WIC are not field replaceable.

The Cisco 1712 Security Access router is a fixedconfigurationrouter that includes a 1-port Integrated Services Digital Network Basic Rate Interface (ISDN-BRI) S/T interface card (WIC-1B-S/T) that is installed in the WAN interface card (WIC) slot 1. The Cisco 1712 Security Access router also includes an integrated 4-port 10/100-Mbps Ethernet switch in WIC slot 0, an onboard Fast Ethernet port external interface, and a virtual private network (VPN) module in the router’s internal slot. The ISDN WIC and the switch port WIC are not field replaceable.

The Cisco 1711 and Cisco 1712 Security Access routers provide secure Internet connectivity and dial backup using the analog modem port (on the Cisco 1711) or the ISDN port (on the Cisco 1712) in the event that your primary connection fails. The switch ports and the onboard 10/100-Mbps Ethernet port enable you to configure a demilitarized zone (DMZ) using virtual local area networks (VLANs) and Cisco IOS firewall features.

Additional documentation can be found on Cisco.com.

Product Serial Number Location

The serial number label for Cisco 1711 and Cisco 1712 routers is located on the rear of the chassis, to the right of the On/Off switch.

3 Unpacking the Box

When you unpack the box containing your Cisco 1711 or Cisco 1712 Security Access router, you should find the following items:

• One Cisco 1711 or Cisco 1712 Security Access router

• One blue RJ-45-to-DB-9 console cable

• One DB-9-to-DB-25 adapter

• One black power supply

• One black power supply cord

• Product documentation

Items You Need to Provide

Depending on your network environment, you may need to provide some of the following items so that you can install the router:

• Straight-through Ethernet cables (RJ-45-to-RJ-45) to connect the router to a broadband (xDSL or cable) modem and to a

hub or switch

• Straight-through or crossover cables to connect WICs to the appropriate WAN services (the integrated switch ports operate in auto-detect mode)

• Ethernet hub or switch to connect the router to the local network, or an xDSL or cable modem to connect the router to the service provider

• Server or other computer with a network interface card (NIC) or other networked device (such as a hub or a switch) to connect to the integrated 4-port 10/100-Mbps Ethernet switch

• (Cisco 1712 only) External Network Termination (NT-1), if needed, to connect the WIC to WAN services. (Some ISDN service providers require an external NT-1 device to connect an ISDN S/T port to the ISDN line.)

4 Connecting the Router

Figure 1 shows a typical installation of the Cisco 1711 or Cisco 1712 Security Access router.

Figure 1 Typical Cisco 1711 or Cisco 1712 Installation

Power Supply

WIC 4ESW

WIC0OK

ACT LNK ACT LNK ACT LNK

ACT LNK

LINK100

10/100 ETHERNET

CONSOLE

SEE MANUAL BEFORE INSTALLATION

AUX

MODOK

WIC1OK

BRI S/T

+5, +12, -12 VDC

FDX

Cisco 1711

Ethernet Hub

Internet Service

Provider

DSL/Cable Modem

94244

Follow these steps to connect the router to the power supply, your local network, and your service provider’s network:

Step 1 Connect power to the router as shown in Figure 1:

a. Connect the attached powersupply cord to the power socket (labeled +5, +12, -12 VDC) onthe back panel of the router. b. Connect the separate power cord to the power socket on the power supply. c. Connect the other end of the separate power cord to a power outlet. d. Turn on the router by pressing the power switch to the on ( | ) position.

+ 8 hidden pages