Cisco 15.3.00P1 User Manual
Contents
Release Notes for the Cisco WAN Manager,
Release 15.3.00 P1
August 2006
Rev. C0
These release notes are for use with the Cisco WAN Manager (CWM) 15.3.00 P1 software release that
supports MGX,BPX, and IGX switches. You can access the MGX switch documentationat thiswebsite.
At the site, see MGX Switches:
http://www.cisco.com/en/US/products/hw/switches/tsd_products_support_category_home.html
The first section describes all of the switch releases that CWM 15.3.00 P1 supports.
• Releases Supported by CWM 15.3.00, Patch 1, page 2
• System Requirements, page 3
• CWM Packaging, page 8
• Supported Hardware, page 9
• Releases Certified for CWM 15.3.00 P1, page 22
• New Features and Enhancements, page 23
• CWM Feature Limitations, page 23
• Installing and Uninstalling CWM 15.3.00 P1, page 33
• Creating a CWM Auto-Restart Shell Script, page 43
• Installing WANDEST 2.7.00, Patch 1, page 44
• SNMP Service Agent Trap Limitation, page 46
• Caveats, page 47
• Related Documentation, page 48
• Obtaining Documentation, Support, and Security Guidelines, page 49
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2006 Cisco Systems, Inc. All rights reserved.
Releases Supported by CWM 15.3.00, Patch 1
Releases Supported by CWM 15.3.00, Patch 1
Table 1 shows the BPX, IGX, and MGX switch platforms and releases that the CWM 15.3.00, Patch 1
software supports.
For additional information on supported products, see these sections:
• Supported Hardware, page 9
• Releases Certified for CWM 15.3.00 P1, page 22
Table 1 Switch Platforms and Releases Supported by CWM 15.3.00 P1
Switch Platform Supported Software Release
Existing WAN switching products,
including the Cisco IGX 8400 series
and the Cisco BPX 8600 series
SES PNNI Controller 3.0.10–3.0.25
MGX 8220 4.1.07–4.1.12
MGX 8230, 8250 and 8850 (PXM1) 1.1.40–1.1.42
MGX8830/B (PXM45/C) 5.1.20
MGX 8830 and 8850 (PXM1E)
MGX 8850 (PXM45)
MGX 8880 (PXM45) 5.0.00–5.0.20
MGX 8950 (PXM45) 2.1.76–2.1.81
9.2.33–9.2.43
9.3.05–9.3.51
9.4.00–9.4.12
4.0.00–4.0.15
5.0.12–5.0.20
1.2.00–1.2.13
1.2.20–1.2.22
1.3.00–1.3.12
1.3.14
5.2.00
5.3.00 and 5.3.10
3.0.23–3.0.25
4.0.00–4.0.17
5.0.00–5.0.20
5.1.20
5.2.00
5.3.00 and 5.3.10
5.1.20
5.2.00
5.3.00 and 5.3.10
3.0.23–3.0.25
4.0.00–4.0.17
5.0.00–5.0.20
5.1.20
5.2.00
5.3.00 and 5.3.10
Release Notes for the Cisco WAN Manager, Release 15.3.00 P1
2
OL-11190-01, Rev. C0
System Requirements
This section describes the system requirements for using the CWM:
• CWM Server Requirements, page 3
• Java Client Requirements, page 4
• Standalone Statistics Manager Requirements, page 4
• Solaris Patch Requirements, page 6
• HP OpenView Requirements, page 7
• Informix Requirements, page 7
In addition to the CWM platform requirements listed in the Cisco WAN Manager Installation and
Configuration Guide, Release 15.3.00, consider also the following:
• UltraSPARC II,UltraSPARCIII, and UltraSPARCIIIi workstations—The CWM is compatible with
them. For system requirements, see Tables 2 through 5.
• Ultra 60 and Enterprise 450 and 4500—They were certified with earlier CWM releases and canstill
be used with this release. For the certified system requirements, see the CWM 11.0.10 release notes.
Cisco does not provide technical support for Sun configurations or products that Sun Microsystems
no longer supports.
• Graphics card—A graphics card is required when using the Java Client to access to the CWM.
• Video—Video on the CWM server is required only for user access or maintenance. It can be added
to Sun servers or workstations. For Ultra and Enterprise, a video adapter is required.
• Firewalls—If you are using a firewall between the server and the clients, you must open a range of
ports for the CWM servers. For additional information about using firewalls, see the “Using
Firewalls” section in the CWM installation guide. You can access all CWM documentation at this
website:
http://www.cisco.com/en/US/products/sw/netmgtsw/ps2340/tsd_products_support_series_home.ht
ml
System Requirements
CWM Server Requirements
Table 2 lists the system requirements for the CWM server. Note also the following about the
CWM servers:
• Other UltraSPARC III server models with equal or higher CPU speedand memorycapacity can also
be used.
• If UltraSPARC II servers are used, see the CWM 11.0.10 release notes for system requirements.
• If you are using an Ultra 60 (low-end platform), it should have at least 2 GB of RAM.
OL-11190-01, Rev. C0
Release Notes for the Cisco WAN Manager, Release 15.3.00 P1
3
System Requirements
Table 2 CWM Server System Requirements
Max No. of
PVC/SPVC
Connections
Min.
No.
CWM
Platform
Low - Medium #1 1 900 2 4 1x 36 100K 10 100 Netra 20, Sun Fire280R
Low - Medium #2 1 1000 2 4 2x36 100K 10 100 Sun Fire V210
Medium #1 2 900 4 8 1x36 200K 20 500 Netra20, Sun Fire 280R
Medium #2 2 1280 4 8 2 x 72 200K 20 500 Sun Fire V240
High- Carrier Grade 4 900 8 16 2x36 1M 40 1000 Sun Fire V880
Carrier Grade 8 900 16 32 2x 36 2M 100 2000 Sun Fire V880
Carrier Grade 2 8 900 40 88 5 x 68 3M 100 2000 Sun Fire V880
of
CPUs
CPU
Speed
(MHz)
Min.
RAM
(GB)
Min.
Swap
Space
(GB)
Min.
Disk
Space
(GB)
or
Connection
Segments
for XPVC
Max.
No. of
PC
Clients
Max.
No. of
Node
s
UltraSPARC III Server
Used for NetworkScale
Testing by Cisco
Java Client Requirements
Table 3 lists the Java Client system requirements.
Table 3 Java Client System Requirements
CWMJava
Client Operating System Web Browser No. of CPUs
PC Windows 2000
Windows NT 4.0,
SP 6a
Windows XP, SP1
SPARC10 Solaris 8
Solaris 9
IE 6.0
Netscape 4.76
JRE 1.4.2_02
(CWM 15.3.00 P1
also supports JRE
1.4.2_10.)
Netscape 4.76 1: 450 MHz 450 512 1 130
Standalone Statistics Manager Requirements
Table 4 lists the Standalone Statistics Collector (SSC) or Standalone Statistics Manager (SSM) system
requirements, which are the same. Note also the following:
• The file size is 2 MB (typically holds statistics with peak enabled for 20-KB endpoints).
• The number of files does not increase with smaller file size.
Disk
CPU
Speed
(MHz)
1: Pentium 3 750 512 N/A 130
RAM
(MB)
Swap
Space
(GB)
Free
Space
(MB)
Release Notes for the Cisco WAN Manager, Release 15.3.00 P1
4
OL-11190-01, Rev. C0
System Requirements
• Average Network Transfer Rate is the required TFTP or FTP throughput to collect the maximum
number of files (combination of server performance and network bandwidth and traffic).
• One SSM can control a maximum of 12 SSCs.
Table 4 SSC or SSM System Requirements
Max. No. of
SSC Platform
No.of
CPUs
Min.
CPU
Speed
(MHz)
Average
Network
Transfer
Rate RAM
Swap
Space
(GB)
Disk
Space
(GB)
Stats Files
(15-min.
collection
intervals)
Server Used
in CiscoTesting
Low 2 450 170 kBps 512 MB 2 2 x 18 350 U60
Medium #1 2 450 3.5 MB/sec 512 MB 2 2 x 18 700 U60
Medium #2 1 1002 4 MB/sec 1 GB 2 2 x 73 550 Sun Fire 210/240
Medium #3 1 900 1.7 MB/sec 1 GB 2 1 x 36 700 Netra 20 or
Sun Fire 280R
High #1 2 900 3.5 MB/sec 4 GB 8 1 x 36 900 Netra 20 or
Sun Fire 280R
High #2 2 1200 4 MB/sec 1 GB 2 2 x 73 1200 Sun Fire 240
Table 5 lists additionalsystem requirements forthe parserin the CWMserver,SSC, or SSM.If the parser
is enabled, add the applicable system requirements in Table 5 to the CWM server requirements listed in
Table 2 or to the SSM or SSC requirements listed in Table 4.
Five statistics are collected from each connection segment endpoint in 15-minute file collection
intervals. Collecting statistics for 4 million endpoints with five statistics per endpoint requires 80 GB of
disk space per 24-hour period. You will need at least 3 x 36 GB of disk space.
Table 5 Parser System Requirements for the CWM Server, SSC, or SSM
Max.No. of
Connection
SSM Platform
No. of
CPUs
Min.
CPU
Speed
(MHz)
RAM
(GB)
Swap
Space
(GB)
Min.
Disk Space
(GB)
Segment
Endpoints
(Statistics
Enabled)
Server Used in Cisco
Testing
Low - Medium 2 450 1 2 2 x 18 300 KB Ultra 60
Low - Medium 1 900 2 4 2 x 36 750 KB Netra 20, Sun Fire 280R
Medium 2 900 4 8 2 x 36 2 MB Netra 20, Sun Fire 280R
High - Carrier
4 900 8 16 2 x 36 4 MB Sun Fire V880
Grade
OL-11190-01, Rev. C0
Release Notes for the Cisco WAN Manager, Release 15.3.00 P1
5
System Requirements
Solaris Patch Requirements
This section shows the Solaris patches that you must install for the CWM and those that we recommend
you install. You will install these patches after you install the Solaris 9 operating system.
Before You Begin Installing Patches
For best results, follow these Sun recommendations before you begin installing the patches:
• After installing the Solaris 9 operating system, you must install the Solaris 9 Kernel Patch 12 or
later. After you have installed the patch, you will install the additional patches (see Table 6)ifthey
were not already installed as part of the cluster.
• Use the single-user mode to install most patches.
• Shut down CWM processes before installing the patches.
• Avoid installing these patches that cause problems with Informix during startup.
–
SPARC Platform—Solaris 9 with patches 112963-21 through 112963-24
–
x86 Platform—Solaris 9 with patches 113986-17 through 113986-20
• Not all Solaris patches or patch clusters require a reboot. If a reboot is not required, you can start
the CWM after the patch is installed.
Installing the Patches
Use this procedure and sequence to install the Solaris patches, which assumes that the Solaris operating
system is already installed.
Step 1 Verify the already installed patches. To do this, use the Solaris showrev –p command.
Step 2 Go to the SunSolve Patch Access website to access the patches:
http://sunsolve.Sun.COM/pub-cgi/show.pl?target=patches/patch-access
(If you have a SunSpectrum contract, you can also access patches from SunService.)
Install the Kernel Patch 12 for Solaris 9. See Table 6 for the correct version number.
Step 3 Install the rest of the required patches ifthey were not already installed as part of the cluster. Depending
on your situation, you may want to enter only the first6 digitsof thepatch numberin theFind Patchfield
on the Sun Patch Access site and not the version extension to obtain the latest patch version.
Step 4 Install the recommended patches, as needed and desired. (Several of these recommended patches may
require a service contract with Sun.)
Release Notes for the Cisco WAN Manager, Release 15.3.00 P1
6
OL-11190-01, Rev. C0
Table 6 Required and Recommended Solaris Patches
Patches Solaris 9
Required to be
installed first
Required 112874-31
Recommended 115336-02
Kernel Patch 12
(112233-12 or higher)
112785-42
112970-07
114716-01
113580-01
114224-02
112998-03
112811-01
112964-07
113575-05
112808-06
System Requirements
HP OpenView Requirements
HP OpenView is used only for viewing the event log and is not required for other CWM procedures.
The CWM works with HP OpenView 6.3 or 7.0.
HP OpenView is not bundled with the CWM CDs. You must order it directly from Hewlett-Packard and
follow the H-P installation requirements and procedures. (Refer to HP OpenView Network Node
Manager Products, Installation Guide, Part No. J1136-90000.)
Informix Requirements
The CWM uses Informix 9.4 for database operations. The Informix software is bundled with the CWM
and is included on the CWM Server CD in the CWM CD package. The Informix program is installed
automatically when the CWM is installed.
OL-11190-01, Rev. C0
Release Notes for the Cisco WAN Manager, Release 15.3.00 P1
7
CWM Packaging
CWM Packaging
This section describes theCWM andassociated softwareand CDs.See Table 7for softwareinformation
and CD contents.
The CWM Software Evaluation CD package includes all CWM CDs and functionality.All of the CWM
features are available until the 45-day evaluation period expires. As noted in Table 7, when you order
the CWM package, you receive the CWM Server and Documentation CDs.
Table 7 CWM and Associated Software
Software and
Documentation CD Notes
CWM Server
Informix 9.4
Orbix
Java Development Kit
(JDK)
CWM documentation
(PDFs)
Acrobat Reader
gzip
CWM Service Agent Service Agent CD The CD must be ordered separately from the
Statistics Collection
Manager–Standalone
(SCMSA)
RTM Proxy for the
SCM application
Cisco WAN Data
Extraction and
Synchronization Tool
(WANDEST)
CWM Server: CD 1 Part of the CWM package.
CWM Documentation:
CD 2
Standalone Statistics
Collection Manager CD
RTM Proxy for SCM
Application CD
WANDEST Server
Software CD
WANDEST Client
Software CD
Part of the CWM package.
The gzip utility is used to decompress the gz
files. The command is gzip –d.
CWM Client/Server package CD set.
The CD must be ordered separately from the
CWM package CD set.
The Standalone SCM software includes the
WANDEST client software and the Informix
server software.
This application is included on a separate CD
with the Standalone Statistics Collection
Manager software only when you order that
software. It is meant to be installed only with
the SSM and not on systems using the Service
Agent. If you have alreadyinstalled theService
Agent software and you attempt to install this
application, you will see errors because the
~/config/process.conf file has duplicate entries
for the RTM Proxy.
To install the RTM Proxy for SCM application
from the CD, refer to the CWM
installation guide.
The CD must be ordered separately from the
CWM set.
Release Notes for the Cisco WAN Manager, Release 15.3.00 P1
8
OL-11190-01, Rev. C0
Table 7 CWM and Associated Software (continued)
Software and
Documentation CD Notes
Automated Bulk
Provisioning
Cisco WAN
Modeling Tools
Supported Hardware
The following subsections list all of the hardware that CWM 15.3.00, Patch 1 supports. You can access
BPX, IGX, and MGX switch documentation at this website:
http://www.cisco.com/en/US/products/hw/switches/tsd_products_support_category_home.html
See also these sections:
• Releases Supported by CWM 15.3.00, Patch 1, page 2
• Releases Certified for CWM 15.3.00 P1, page 22
Automated Bulk
Provisioning Software CD
Cisco WAN Modeling
Tools Software CD
Supported Hardware
This CD must be ordered separately from the
CWM set.
This CD must be ordered separately from the
CWM set.
New Hardware Supported by CWM 15.3.00, Patch 1
No new hardware has been added in the CWM 15.3.00, Patch 1 release.
Existing Hardware Supported by CWM 15.3.00, Patch 1
The tables on the following pages list the hardware that CWM 15.3.00, Patch 1 supports. Table 8
provides an index of the table numbers that apply to particular platforms.
Table 8 Index of Hardware Tables
Platform Series Table and Page No.
IGX 8400 Table 9 on page 10
BPX 8600 Table 10 on page 10
MGX 8220 Table 11 on page 11
MGX 8230 (PXM1) Table 12 on page 12
MGX 8250 (PXM1) Table 13 on page 13
MGX 8850 (PXM1) Table 14 on page 14
PXM1E on MGX 8830, 8830/B, 8850, and 8850/B Table 15 on page 15
MGX 8830/B (PXM 45/C) Table 16 on page 17
PXM45 on MGX 8850 and 8850/B Table 17 on page 18
MGX 8880 (PXM45/C) Table 18 on page 20
MGX 8950 (PXM45) Table 19 on page 20
SES PNNI Controller Table 20 on page 21
OL-11190-01, Rev. C0
Release Notes for the Cisco WAN Manager, Release 15.3.00 P1
9
Supported Hardware
IGX 8400 Series
For IGX 8400 product details, refer to Table 10 in the release notes at this website:
http://www.cisco.com/univercd/cc/td/doc/product/wanbu/bpx8600/9_4/rnote/9412rn.pdf
Table 9 IGX 8400
Front Card Back Card
IGX-HDM —
IGX-NPM SCM
IGX-NTM BC-xxxxx-T1/E1/SR/Y1
IGX-UFM-4C
IGX-UFM-8C
BC-UFI-8T1/8E1-DB15
BC-UFI-8E1-BNC
IGX-UFM-U BC-UFI-12V35
BC-UFI-12X21
BC-UFI-4HSSI
IGX-URM BC-2FE2V
IGX-UVM UVI-2T1EC/2E1EC
UVI-2J1EC
IGX-UXM
IGX-UXME
BC-UAI-4-155-MMF/SMF
BC-UAI-2-155-SMF
BC-UAI-2SMFXLR
BC-UAI-4SMFXLR
BC-UAI-3/6-T3/E3
BC-UAI-4/8-E1-BNC
BC-UAI-4/8-T1/E1-DB15
BC-UAI-4-STM1E
BPX 8600 Series
For BPX 8600 product details, refer to Table 9 in the release notes at this website:
http://www.cisco.com/univercd/cc/td/doc/product/wanbu/bpx8600/9_4/rnote/9412rn.pdf
Table 10 BPX 8600
Front Card Back Card
ASI-2T3/E3 —
ASI-155E —
ASM-LM —
BNI-3-T3/C
BNI-3-E3/C
BPX-E3-BC
BPX-MMF/SMF/SMFLR-2-BC
BNI-155E
BNI-2-155/B
BPX-ASM BPX-ASM-BC
BPX-BCC BPX-BCC-BC
BPX-BCC-3 BCC-3BC
BPX-BCC4V —
10
Release Notes for the Cisco WAN Manager, Release 15.3.00 P1
OL-11190-01, Rev. C0
Table 10 BPX 8600 (continued)
Front Card (continued) Back Card
BPX-BCC-4V/B —
BPX-BME BPX-T3/E3-BC
BPX-BME-OC12 BPX-E3-BC
BPX-MMF/SMF/SMFLR-2-BC
BPX-BXM-155-8 BPX-MMF/SMF/SMFLR-8-155
BPX-BXM-155-4
BPX-MMF/SMF/SMFLR-4-155
BPX-BXM-E-155
BPX-BXM-622
BPX-BXM-E-622
BPX-622-2-BC
BPX-SMF/SMFLR-622-BC
BPX-SMF/SMFLR-622-2-BC
BPX-BXM-T3/E3 BPX-T3/E3-BC
BPX-STM1-EL-4
BPX-T3/E3
BPX-E3-BC
BPX-MMF/SMF/SMFLR-2-BC
BPX-XLR BPX-E3-BC
BPX-MMF/SMF/SMFLR-2-BC
RDNT-SMF-155
RDNT-LR-155/622
BPX-E3-BC
BPX-MMF/SMF/SMFLR-2-BC
RDNT-SMF-622
Supported Hardware
MGX 8220 Series
For MGX 8220 product details, refer to Table 8 in the release notes at this website:
http://www.cisco.com/univercd/cc/td/doc/product/wanbu/bpx8600/9_4/rnote/9412rn.pdf
Table 11 MGX 8220
Front Card Back Card
ASC ASC-LM
AUSM-4T1E1
RJ-48-8E1/8T1
AUSM-8T1E1
AUSM--8T1E1/B
BNM-155 155-SMF
T3E3-B/D T3E3-B/D
CESM-8T1E1 RJ-48-8E1/8T1
SMB-8E1
FRSM-4T1E1
FRSM-8T1E1
RJ-48-8T1/8E1
SMB-8E1
FRSM-HS1 HSI-4X21/3HSSI
FRSM-VHS HS2
IMATM-8T1E1/B RJ-48-T3T1/E3E11.3.12
SMB-E3E1
OL-11190-01, Rev. C0
Release Notes for the Cisco WAN Manager, Release 15.3.00 P1
11
Supported Hardware
Table 11 MGX 8220 (continued)
Front Card Back Card
SRM DB-15-T1/E1
LM-3T3
AUSM-4T1E1
8T1/E1
AUSM-8T1E1
AUSM-8T1E1/B
MGX 8230 Series
For MGX 8230 product details, refer to Tables 16 and 17 in the release notes at this website:
http://www.cisco.com/univercd/cc/td/doc/product/wanbu/mgx8230/13/rnotes/rn1312.pdf
Table 12 MGX 8230 (PXM1)
Front Card Back Card
AX-CESM RJ48-8T1/8E1
SMB-8E1
AX-FRSM RJ48-8T1/8E1
SMB-8E1
MGX-AUSM 8T1/E1
MGX-CESM MGX-RJ48-8T1
MGX-BNC-2E3/2E3A/2T3
MGX-FRSM-2CT3
MGX-BNC-2E3/2T3/2E3A
MGX-FRSM-2T3E3
MGX-FRSM-HS1/B MGX-12IN1-4S
MGX-FRSM-HS2 MGX-HSSI
MGX-FRSM-HS2/B MGX-HSSI
MGX-12IN1-8S
MGX-RPM-128M/B MGX-RJ45-FE/4E
MGX-MMF-FE
MGX-MMF/SMF-FDDI
MGX-MMF/SMF-FDDI/FD
MGX-RPM-PR MGX-MMF-FE
MGX-RJ45-4E/B (Ethernet)
MGX-RJ45-FE (Fast Ethernet)
5-port auto-sensing Fast and Gigabit Ethernet
MGX-SRME
MGX-SRME/B
MGX-SMFIR-1-155
MGX-STM1-EL1
T3
MGX-VISM-8T1/8E1 AX-SMB-8E1
AX-R-SMB-8E1
AX-RJ-48-8T1/8E1
AX-R-RJ-48-8T1/8E1
MGX-RJ48-8E1
12
Release Notes for the Cisco WAN Manager, Release 15.3.00 P1
OL-11190-01, Rev. C0
Supported Hardware
Table 12 MGX 8230 (PXM1) (continued)
MGX-VISM-PR AX-SMB-8E1
AX-R-SMB-8E1
AX-RJ48-8T1/8E1
AX-R-RJ48-8T1/8E1
MGX-RJ48-8E1
PXM1 T3/E3/OC-3/OC-12
MGX 8250 Series
For MGX 8250 product details, refer to Tables 15 and 17 in the release notes at this website:
http://www.cisco.com/univercd/cc/td/doc/product/wanbu/mgx8230/13/rnotes/rn1312.pdf
Table 13 MGX 8250 (PXM1)
Front Card Back Card
AX-CESM AX-RJ48-8T1/8E1
AX-SMB-8E1
MGX-RPM-128M/B MGX-RJ45-FE/4E
MGX-MMF-FE
MGX-MMF/SMF-FDDI
MGX-MMF-FDDI/FD
MGX-SMF-FDDI/FD
MGX-SRME MGX-SMFIR-1-155
MGX-STM1-EL1
MGX-AUSM AX-SMB-8E1
AX-R-SMB-8E1
AX-RJ48-8E1/8T1
AX-R-RJ48-8T1/8E1
MGX-RJ48-8E1
MGX-CESM MGX-BNC-2E3/2E3A/2T3
MGX-FRSM-HS1/B MGX-12IN1-4S
MGX-FRSM-HS2 MGX-HSSI
MGX-FRSM-HS2/B MGX-HSSI
MGX-12IN1-8S
MGX-RPM-PR MGX-MMF-FE
MGX-RJ45-4E/B (Ethernet)
MGX-RJ45-FE (Fast Ethernet)
5-port auto sensing Fast Ethernet and Gigabit-Ethernet
MGX-VISM-8T1
MGX-VISM-8E1
AX-SMB-8E1
AX-R-SMB-8E1
AX-RJ48-8T1/8E1
AX-R-RJ48-8T1/8E1
MGX-RJ48-8E1
MGX-VISM-PR AX-RJ48-8T1
AX-R-RJ48-8T1
OL-11190-01, Rev. C0
Release Notes for the Cisco WAN Manager, Release 15.3.00 P1
13
Supported Hardware
Table 13 MGX 8250 (PXM1) (continued)
Front Card Back Card
MPSM-8-T1E1 AX-RJ-48-8T1/8E1
AX-R-RJ-48-8T1/8E1
AX-SMB-8E1
AX-R-SMB-8E1
PXM1 T3/E3/OC-3/OC-12
SRM LM-3T3
MGX 8850 Series
For MGX 8850 product details, refer to Tables 15 and 17 in the release notes at this website:
http://www.cisco.com/univercd/cc/td/doc/product/wanbu/mgx8230/13/rnotes/rn1312.pdf
Table 14 MGX 8850 (PXM1)
Front Card Back Card
AX-CESM AX-RJ48-8E1/8T1
AX-SMB-8E1
AX-FRSM AX-SMB-8E1
AX-R-SMB-8E1
AX-RJ48-8E1/8T1
AX-R-RJ48-8E1/8T1
MGX-RJ48-8E1
MGX-AUSM AX-SMB-8E1
AX-R-SMB-8E1
AX-RJ48-8T1/8E1
AX-R-RJ48-8T1/8E1
MGX-RJ48-8E1
MGX-CESM RJ48-8T1
R-RJ48-8T1
MGX-BNC-2E3/2E3A/2T3
MGX-FRSM-2CT3
MGX-FRSM-2T3E3
MGX-BNC-2T3/2E3
MGX-BNC-2E3A
MGX-BNC-2T3
MGX-FRSM-HS1/B MGX-12IN1-4S
MGX-SCSI2-2HSSI/B
MGX-FRSM-HS2 MGX-SCSI2-2HSSI/B
MGX-FRSM-HS2/B MGX-12IN1-8S
MGX-RPM-PR MGX-MMF-FE
MGX-RJ45-4E/B (Ethernet)
MGX-RJ45-FE (Fast Ethernet)
5-port auto sensing Fast and Gigabit Ethernet
14
Release Notes for the Cisco WAN Manager, Release 15.3.00 P1
OL-11190-01, Rev. C0
Table 14 MGX 8850 (PXM1) (continued)
Front Card Back Card
MGX-RPM-128M/B MGX-MMF-FE
MGX-RJ45-FE
MGX-RJ45-4E
MGX-MMF/SMF-FDDI
MGX-MMF/SMF-FDDI/FD
MGX-SRME MGX-SMFIR-1-155
MGX-STM1-EL1
MGX-VISM-8T1
MGX-VISM-8E1
AX-SMB-8E1
AX-R-SMB-8E1
AX-RJ-48-8T1/8E1
AX-R-RJ48-8T1/8E1
MGX-RJ48-8E1
MGX-VISM-PR AX-RJ48-8T1
AX-R-RJ48-8T1
MGX-VXSM-6T3 VXSM-BC-SMB-3T3E3
MPSM-8-T1E1 AX-RJ-48-8T1/8E1
AX-R-RJ-48-8T1/8E1
AX-SMB-8E1
AX-R-SMB-8E1
PXM1 T3/E3/OC-3/OC-12
SRM LM-3T3
Supported Hardware
PXM1E on MGX 8830, 8830/B, 8850, and 8850/B Series
For product details, refer to Tables 4 through 8 in the release notes at this website:
http://www.cisco.com/univercd/cc/td/doc/product/wanbu/8850px45/relnote/52008xx0.pdf
Table 15 PXM1E on MGX 8830, 8830/B, 8850, and 8850/B
Front Card Back Card
AX-FRSM AX-SMB-8E1
AX-R-SMB-8E1
AX-RJ48-8T1/8E1
AX-R-RJ48-8T1/8E1
MGX-RJ48-8E1
AX-CESM AX-RJ48-8E1/8T1
AX-SMB-8E1
MGX-AUSM AX-SMB-8E1
AX-R-SMB-8E1
AX-RJ48-8T1/8E1
AX-R-RJ48-8T1/8E1
MGX-RJ48-8E1
MGX-FRSM-2T3E3
MGX-FRSM-2CT3
MGX-BNC-2T3/2E3
MGX-BNC-2E3A
MGX-FRSM-HS2/B MGX-12IN1-8S
OL-11190-01, Rev. C0
Release Notes for the Cisco WAN Manager, Release 15.3.00 P1
15
Loading...