Chevrolet Corvette 2008 Navigation Manual

2008 Chevrolet Corvette Navigation System M

Overview

Features and Controls

........................................................ 1-1

.................................................. 1-2

..................................... 2-1

................................ 2-2

Navigation Audio System

Voice Recognition

................................................................ 1

Index

........................................... 4-1

................................ 3-1

............................ 3-2

...................................... 4-2

GENERAL MOTORS, GM, the GM Emblem, CHEVROLET, the CHEVROLET Emblem, the name CORVETTE, and the CORVETTE Emblems are registered trademarks of General Motors Corporation.

Dolby

is manufactured under license from Dolby

Laboratories. Dolby®and the double-D symbol are trademarks of Dolby®Laboratories.

The information in this manual supplements the owner manual. This manual includes the latest information available at the time it was printed. We reserve the right to make changes in the product after that time without notice. For vehicles ﬁrst sold in Canada, substitute the name General Motors of Canada Limited for Chevrolet Motor Division whenever it appears in this manual.

Keep this manual with the owner manual in the vehicle, so it will be there if it is needed. If the vehicle is sold, leave this manual in the vehicle.

Litho in U.S.A. Part No. 15838253 B Second Printing

Canadian Owners

A French language copy of this manual can be obtained from your dealer/retailer or from:

Helm, Incorporated P.O. Box 07130 Detroit, MI 48207

1-800-551-4123 www.helminc.com

Propriétaires Canadiens

On peut obtenir un exemplaire de ce guide en français auprès de concessionnaire ou à l’adresse suivante:

Helm Incorporated P.O. Box 07130 Detroit, MI 48207

1-800-551-4123 www.helminc.com

iii

✍ NOTES

Section 1 Overview

Overview .........................................................1-2

Navigation System Overview ............................1-2

Getting Started ...............................................1-4

Cleaning the Display .....................................1-12

1-1

Overview

Navigation System Overview

1-2

A. g (Voice Recognition) Key. See “Hard Keys”

under Using the Navigation System on page 2-2 for more information.

B. SRCE (Source) Key. See “Hard Keys” under Using

the Navigation System on page 2-2 for more information.

C. NAV (Navigation) Key. See “Hard Keys” under Using

the Navigation System on page 2-2 for more information.

ez (Audio/Screen Adjust) Key. See “Hard Keys”

under Using the Navigation System on page 2-2 for more information.

QO SEEKR(Seek/Tune) Key. See “Hard Keys”

under Using the Navigation System on page 2-2 for more information.

F. Power Volume Knob. See “Hard Keys” under Using

the Navigation System on page 2-2 for more information.

XDVD (DVD Map Database Eject) Key. See

“Installing the Map DVD” under Maps on page 2-49 for more information.

XB(CD Eject) Key. See “CD Player on page 3-14

for more information.

I. CD Slot

J. DVD Map Database Slot

K. Navigation System Screen

X(Open/Close Faceplate) Key. See “Hard Keys”

under Using the Navigation System on page 2-2 for more information.

1-3

Getting Started

Before you begin to operate the navigation system, read this manual thoroughly to become familiar with it and to understand how the system works.

Any route suggestionsmade by this navigation system may never override local traffic regulations, your own judgement, and/or knowledge of safe driving practices.

Disregard route suggestions made by the navigation system if such suggestions would; cause you to perform a hazardous or illegal maneuver, place you in a hazardous situation, or route you into an area you consider unsafe.

Keeping your mind on the drive is important for safe driving. See “Defensive Driving” in the Index of your vehicle’s owner manual for more information. Get familiar with your vehicle’s navigation system so you can use it with less effort and take full advantage of its features. Your navigation system includes not only navigation, but also audio functions.

While your vehicle is parked:

• Familiarize yourself with all of its controls: hard keys

on the faceplate and touch-sensitive screen buttons.

• Familiarize yourself with its operation.

• Set up your audio by presetting your favorite stations,

setting the tone, and adjusting the speakers. Then, when driving conditions permit, you can tune to your favorite stations using the presets and steering wheel controls (if equipped).

• Set up the navigation features that can only be done

before you begin driving, such as entering an address or a preset destination.

Entering a destination or alphanumeric text requires many steps, so you can only perform these operations when the vehicle is in PARK (P). You will notice that touch-sensitive screen buttons leading to the alphanumeric keyboard are dimmed out while driving.

Other functions may also be locked out while driving and they too will appear grayed out on the screen — but all functions are available when parked. Some functions can be performed while driving, as long as you can do so without diverting too much of your attention from your driving.

1-4

{CAUTION:

This system provides you with a far greater access to audio stations and song listings. Giving extended attention to entertainment tasks while driving can cause a crash and you or others can be injured or killed. Always keep your eyes on the road and your mind on the drive — avoid engaging in extended searching while driving.

{CAUTION:

Looking at the moving map on the navigation screen frequently or for too long while driving can cause a crash and you or others can be injured or killed. Keep your eyes and mind on the road and avoid looking too long or too often at the moving map on the navigation screen. Use the voice guidance directions whenever possible.

The navigation system allows you to do the following:

• Plan a route with provided turn-by-turn route

and map guidance with voice prompts.

• Select a destination using various methods and

choices.

• Receive broadcast announcements on traffic and

emergency alert communications.

You should always be alert and obey traffic and roadway laws and instructions, regardless of the guidance from the navigation system. The navigation system uses street map information that does not include all traffic restrictions or the latest road changes, it may suggest using a road that is now closed for construction or a turn that is prohibited by signs at the intersection. The system uses limited information, you must always evaluate whether following the system’s directions is safe and legal for the current conditions.

1-5

Each time you enter the navigation system, the CAUTION screen will display. Touch Agree to proceed into the system.

When getting started you may set the navigation system to your preference or delete information you may have entered using various options. To do so, reference the following topics.

Language

To change the language of the navigation screens, see “DIC Operation and Displays” in the Index of your vehicle’s owner manual.

Deleting Personal Information

This navigation system can record and store destinations. At times, such as when you are disposing of your vehicle, you may want to delete these destinations. refer to the following sections to delete the destination information that has been stored.

See “Memory Points”, “Home”, “Previous Destination” and “Preset Destinations”, under Stored Locations on page 2-23 for deleting stored destinations.

Storing Radio Station Presets

To set preset radio stations, do the following:

1. Press the power/volume knob to turn the system on.

2. Press the SRCE hard key and select the desired band (AM, FM1, FM2, XM1, or XM2 (if equipped)).

3. Use the TUNE/SEEK arrows to tune to the desired station.

4. Press and hold one of the six preset screen buttons, at the bottom of the screen, until you hear a beep or see the station displayed on the selected preset button.

5. Repeat the steps for each preset.

See “Preset Station Menu” under Navigation Audio System on page 3-2 for more information.

1-6

Setting the Time

To set the time, do the following:

1. Press the power/volume knob to turn the system on.

2. Press and hold the time display in the upper right corner of any screen.

3. Select the 12H or 24H screen button to display the time in standard or military time.

4. Press and hold the Hour and Min. (minute) arrow buttons to increase or to decrease the time.

5. Select the appropriate time zone screen button.

6. Select the Daylight Saving Time screen button, if necessary.

The radio will use the GPS satellite to set the time. The vehicle needs to be in an open area to receive the signal. See “Clock” under Navigation Audio System on page 3-2 for more information.

Setting the Region, Entering an Address and Point of Interest, and Storing a Home Destination and Preset Destinations

Before entering an Address, Point of Interest, Home, or Preset Destination, select the appropriate region that contains the ﬁnal destination. Your vehicle must be stopped to perform this operation.

Setting the Region

To set the region, do the following:

1. If the radio is already on with a map disc inserted, skip to Step 5.

2. Press the power/volume knob to turn the system on.

3. Insert the DVD map disc. See “Installing the Map DVD” under Maps on page 2-49 for more information.

4. A notice may appear. Touch the Agree screen button to proceed.

5. Press the NAV hard key.

6. Press the MENU screen button.

7. Press the

8. Press the Region screen button.

9. Select the appropriate region numbered screen button that contains your ﬁnal destination.

The system will return to the Enter Destination menu. See Enter Destination on page 2-4 for more information.

< Enter Destination screen button.

1-7

Entering an Address

To set a destination by entering a street address, do the following:

1. If the radio is already on with a map disc inserted, skip to Step 5.

2. Press the power/volume knob to turn the system on.

3. Insert the DVD map disc. See “Installing the Map DVD” under Maps on page 2-49 for more information.

4. A notice may appear. Touch the Agree screen button to proceed.

5. Press the NAV hard key.

6. Press the MENU screen button.

7. Press the Verify that the selected Region is correct.

8. Press the

9. Enter the street name using the alpha keypad on the screen.

Do not enter directional information or street type, and use the space symbol screen button (U)

between street or city names. For example, the street name N. Royal Oak Rd. should be entered as

royal button if an incorrect character has been entered.

< Enter Destination screen button.

2 Address screen button.

Uoak. Use the backspace (V) screen

10. Select the desired street name with the correct designation (Dr., Ln., St., etc.) from the list.

11. If there is more than one city, the system will display the list of cities that have a street with that name. Select a city from the list or select the Input Name screen button to input the city name.

12. Enter the house number using the numeric keypad on the screen and touch the OK screen button.

A map screen will appear with the destination marked.

13. Select the

14. Select the Guide screen button.

15. Once you begin driving you will hear an audio prompt to “Proceed to the highlighted route.” You are now in route guidance mode.

See “Address” under Enter Destination on page 2-4 for more information.

h (destination) symbol screen button.

1-8

Entering a Point of Interest (POI)

To set a destination by entering a Point of Interest (POI), do the following:

1. If the radio is already on with a map disc inserted, skip to Step 5.

2. Press the power/volume knob to turn the system on.

3. Insert the DVD map disc. See “Installing the Map DVD” under Maps on page 2-49 for more information.

4. A notice may appear. Touch the Agree screen button to proceed.

5. Press the NAV hard key.

6. Press the MENU screen button.

7. Press the Verify that the selected Region is correct.

8. Press the

9. Enter the speciﬁc title of the POI in the Name space (i.e. Washington Monument) using the alpha keypad on the screen.

< Enter Destination screen button.

K Point of Interest screen button.

10. Select the POI from the list.

A map screen will appear with the destination marked.

12. Select the

13. Select the Guide screen button.

14. Once you begin driving you will hear an audio prompt to “Proceed to the highlighted route.” You are now in route guidance mode.

Using the Category or City selections will aid the system in ﬁnding your POI by limiting the search options. See “Point of Interest (POI)” under Enter Destination on page 2-4 for more information.

h(destination) symbol screen button.

1-9

Storing a Home Destination

1. If the radio is already on with a map disc inserted, skip to Step 5.

2. Press the power/volume knob to turn the system on.

3. Insert the DVD map disc. See “Installing the Map DVD” under Maps on page 2-49 for more information.

4. A notice may appear. Touch the Agree screen button to proceed.

5. Press the NAV hard key.

6. Press the MENU screen button.

7. Press the

8. Press the

9. Press the Add screen button.

10. Press the Address screen button and enter all address information.

11. Press the OK screen button. A map screen will appear with the destination marked.

12. Press the OK screen button.

13. Press the back arrow screen button. The

Destination screen. See “Using Your Home or Preset Destinations” later in this section for more information.

1-10

N Stored Locations screen button. L Home screen button.

LHome icon will be highlighted on the Enter

Storing a Preset Destination

1. If the radio is already on with a map disc inserted, skip to Step 5.

2. Press the power/volume knob to turn the system on.

3. Insert the DVD map disc. See “Installing the Map DVD” under Maps on page 2-49 for more information.

4. A notice may appear. Touch the Agree screen button to proceed.

5. Press the NAV hard key.

6. Press the MENU screen button.

7. Press the

8. Press the

9. Press the Add screen button, then select the numbered preset button for the destination to appear as.

10. Press the Address screen button and enter all address information.

11. Press the OK screen button. A map screen will appear with the destination marked.

12. Press the OK screen button.

13. Press the back arrow screen button. The numbered preset destination will be highlighted on the Enter Destination screen. See “Using Your Home or Preset Destinations” next in this section for more information.

N Stored Locations screen button. & Previous Dest. screen button.

Using Your Home or Preset Destinations

These destinations are available for selection while driving.

1. If the radio is already on with a map disc inserted, skip to Step 5.

2. Press the power/volume knob to turn the system on.

3. Insert the DVD map disc. See “Installing the Map DVD” under Maps on page 2-49 for more information.

4. A notice may appear. Touch the Agree screen button to proceed.

5. Press the NAV hard key.

6. Press the MENU screen button.

7. Press the

8. Select the preset destination symbols. A map screen will appear with the destination marked.

9. Select the

10. Select the Guide screen button.

11. Once you begin driving you will hear an audio prompt to “Proceed to the highlighted route.” You are now in route guidance mode.

< Enter Destination screen button.

L(Home symbol) or one of the available

h (destination) symbol screen button.

Canceling Guidance

Guidance will be canceled once you arrive at your ﬁnal destination. To cancel guidance prior to arrival at the ﬁnal destination, do the following:

1. Press the NAV hard key to access the map screen.

2. Press the MENU screen button on the map screen.

3. Press the

4. Press the Cancel Guidance screen button.

5. Press the Yes screen button to conﬁrm cancellation.

E Route Options screen button.

Stored Locations

Once a destination has been stored, the address information can then be edited and deleted. See Stored Locations on page 2-23 for more information on other features that can be stored, edited, and deleted.

To delete the stored home destination, do the following:

1. Press the power/volume knob to turn the system on.

2. Insert the DVD map disc. See “Installing the Map DVD” under Maps on page 2-49 for more information.

3. A notice may appear. Touch the Agree screen button to proceed.

If the radio is already on with a map disc inserted, press the NAV hard key.

1-11

4. Press the MENU screen button.

5. Press the

6. Press the

7. Press the Delete screen button.

8. A conﬁrmation pop-up screen will appear: select Yes to delete; select No to cancel the operation.

To delete a waypoint or a stored preset destination, do the following:

1. Press the power/volume knob to turn the system on.

2. Insert the DVD map disc. See “Installing the Map DVD” under Maps on page 2-49 for more information.

3. A notice may appear. Touch the Agree screen button to proceed.

If the radio is already on with a map disc inserted, press the NAV hard key.

4. Press the MENU screen button.

5. Press the

6. Press the Dest. screen button.

7. Press the Delete screen button, then select the way point or the numbered preset button to delete.

8. A conﬁrmation pop-up screen will appear: select Yes to delete; select No to cancel the operation.

N Stored Locations screen button. L Home screen button.

N Stored Locations screen button. $ Dest. & Way Pt. or the & Previous

Guidance Volume

To adjust the volume of voice guidance prompts, do the following:

1. Press the NAV hard key to access the map screen.

2. Press the MENU screen button on the map screen.

3. Press the

4. Press the

5. Select the desired volume or select Off. The system will play back the new volume level.

See “Guidance Volume” under Navigation Set Up on page 2-35 for more information.

I Navigation Set Up screen button.

> Guidance Volume screen button.

Cleaning the Display

If the panel or the display is stained, wipe it with a dry, soft cloth, such as a silicon cloth.

Notice: If you use abrasive cleaners when cleaning glass surfaces, you could scratch the glass. When cleaning the glass, use only a soft cloth and do not spray cleaner directly on the system.

Do not apply spray cleaner directly to the system, the cleaner could affect the mechanical parts.

Do not wipe the panel with a hard cloth or use a volatile liquid such as thinner or alcohol, it could scratch the surface or erase the characters.

1-12

Section 2 Features and Controls

Features and Controls ......................................2-2

Using the Navigation System ...........................2-2

Nav. (Navigation) Menu ...................................2-3

Enter Destination ............................................2-4

Stored Locations ...........................................2-23

Navigation Set Up .........................................2-35

Route Options ..............................................2-43

Maps ..........................................................2-49

Symbols ......................................................2-53

Head-Up Display (HUD) .................................2-59

Keyless Access System .................................2-59

Global Positioning System (GPS) ....................2-60

Vehicle Positioning ........................................2-61

Problems with Route Guidance .......................2-62

If the System Needs Service ..........................2-62

Ordering Map DVDs ......................................2-63

Database Coverage Explanations ....................2-63

2-1

Features and Controls

Using the Navigation System

This section presents basic information to operate the navigation system.

Use the hard keys located on the navigation system along with the available touch screen buttons on the navigation screen to operate the system. See Navigation System Overview on page 1-2 for more information.

Once the vehicle is moving, various functions will be disabled to reduce driver distractions.

Hard Keys

The following hard keys are located on the navigation system:

X (Open/Close Faceplate): Press this key located at

the bottom of the Navigation Screen to open or close the faceplate.

XB (Eject CD): Press the eject CD key next to

the CD loading slot to eject CDs. See CD Player on page 3-14 for more information.

X DVD (Eject Map Database DVD): Press the eject

DVD key next to the DVD loading slot to eject the map DVD. See “Installing the Map DVD” under Maps on page 2-49 for more information.

Power/Volume Knob: Press the power/volume knob to turn the audio and navigation systems on and off. Turn the knob to increase or decrease the volume to the audio system.

g (Voice Recognition): Press this key to activate the

voice recognition system. See Voice Recognition on page 4-2 for more information.

NAV (Navigation): Press this key to access the map screen. If this key is pressed when a map screen is displayed and you are in route guidance, the system will repeat the last voice command.

SRCE (Source): Press this key to access the audio source screen. See Navigation Audio System on page 3-2.

e/ z (Audio/Screen Adjust): Press this key to

access the Audio Adjust and Screen Adjust screens. See Navigation Audio System on page 3-2.

QO SEEKR(Seek/Tune): Press the seek/tune

arrows to go to the next or previous radio station and stay there, or to tune in a station. See Navigation Audio System on page 3-2.

2-2

Alpha-Numeric Keypad

Letters of the alphabet, symbols, punctuation, and numbers will be displayed on the navigation screen as an alpha or numeric keypad. The alpha keypad will be displayed when the system needs input of a city or street name. Touch the Sym. (symbol) screen button at the bottom of the alpha keypad to access the numeric keypad when inputting a house address, punctuation mark, or other character. Touch A - Z to return to the alpha keypad.

All characters are touch-sensitive screen buttons. Touch a character to select it.

U (Space): Touch this screen button to enter a

space between characters or the words of a name.

V (Back space): Touch this screen button if an

incorrect character has been selected. To make name selections easier, the system will only

allow you to select a character which can follow the last one entered. For example, if a Z is entered, a T will not be available to select. The system will highlight the available characters.

If a name is not available after input, it may need to be inputted differently, the map DVD database may not contain that information, or the correct search area has not been selected. See Database Coverage Explanations on page 2-63 for more information.

Touch-Sensitive Buttons

Touch-sensitive buttons are located on the screen. When a screen button has been selected, a beep will sound. These buttons will be highlighted when a feature is available. There are also some toggle screen buttons that will be light color when active.

Nav. (Navigation) Menu

Press the NAV hard key to access the map screen. Press the MENU touch screen button on the map screen.

From this screen all of the navigation system features can be accessed.

2-3

Enter Destination

Press the < Enter Destination screen button to access the ENTER DESTINATION screen. From this screen, several options are available to plan a route by entering destination points.

Once a destination entry is complete, regardless of which method was used, a map screen with the destination previewed will display. You can change route preferences, route options, map appearances, or add a waypoint at this time. You may also set the destination without making any further changes. See “Getting Started on Your Route” later in this section for more information on your choices once a destination has been entered.

This menu has two pages. To view the second page, press the 1/2 arrow button.

2-4

Region

The ENTER DESTINATION screen displays a map of the United States and a part of Canada divided into 11 regions.

Before selecting a destination entry method, review the search area map to make sure your destination is located in the highlighted region.

Touch the Region screen button from the ENTER DESTINATION screen to see a list of states included in the highlighted region, or to change the region. The SEARCH AREA screen will display. Touch the numbered screen button to the left of the search area map that corresponds with the numbered region you wish to select or to view a list of states included in that region. Touch the down arrow to the left of the search area map to select CAN (Canada). Once the region has been selected, the region will be highlighted on the map. Touch the back key to return to the ENTER DESTINATION screen.

2-5

Address

The address destination entry method allows you to input an address by providing the system with a street name or city.

2 Address: Touch this screen button to access the

ADDRESS screen. You can enter the address one of two ways: street ﬁrst or city ﬁrst.

To input the street name ﬁrst, do the following:

1. Touch the Street screen button from the address menu and start inputting the street name using the alpha keypad. A list of available street names will automatically display if there are less than ﬁve street names available. Select the List screen button at any time to view the available street names. The box at the end of the Street entry ﬁeld will contain the number of street names available in the current generated list.

2. Select the desired street name with the correct designation (Dr., Ln, St., etc.) from the list.

3. If the system determines that the street is found in only one city within the search area that city will automatically be selected.

If there is more than one city, the system will display the list of cities that have a street with that name. Select a city from the list or select the Input Name screen button to input the city name.

4. The house number screen will display, enter the house number using the numeric keypad.

5. Once the correct house number is selected, press the OK screen button.

A map screen will appear with the destination marked.

2-6

6. Select the h (destination) symbol screen button.

7. Select the Guide screen button. See “Getting Started on Your Route” later in this

section for more information.

To input the city name ﬁrst, do the following:

1. Touch the City screen button.

2. Select from the choices shown on the city screen: Any City, 5 Nearest Cities, Input City Name, or from the Last 5 Cities used.

• Any City — The system will request input of a

street name, then generate a list of all cities containing that street name. Select a city from the list.

• 5 Nearest Cities — The system will display a list

of ﬁve cities closest to your vehicle’s current position. Select a city from the list.

• Input City Name — The keypad will display for

inputting the city name. Input the city name and then select the city from the list.

• Last 5 Cities — The city names of the last ﬁve

cities that were stored as a previous destination will display. Select a city from the list.

3. The screen to input the street name and house number will display. Input the street name using the alpha keypad. A list of available street names will display if there are less than ﬁve street names available. Select the List screen button at any time to view the available street names. The box at the end of the Street entry ﬁeld will contain the number of street names available in the current generated list.

4. Select the desired street name with the correct designation (Dr., Ln, St., etc.) from the list.

5. The house number screen will display, enter the house number using the numeric keypad.

Once the correct house number is selected, a map screen will appear with the destination marked.

6. Select the

7. Select the Guide screen button. See “Getting Started on Your Route” later in this

section for more information.

h (destination) symbol screen button.

2-7

Point of Interest (POI)

The Point of Interest (POI) destination entry method allows you to select a destination from the POI list.

K Point of Interest: Touch this screen button from

the ENTER DESTINATION screen to access the POINT OF INTEREST screen. This screen has three options to select/input the destination. Either input the name of the POI using the alpha keypad, select a category from the category list, or select the city by selecting the City screen button.

To input the POI name, do the following:

1. Use the alpha keypad to enter the POI name. Touch Sym. (symbol) to select symbols and

numbers for the POI, touch Others to select special characters for the POI, or touch A - Z to return to the alpha keypad.

A list of POIs will appear using the information from the alpha keypad input. A list of available POIs will display when there are less than ﬁve POIs available. Touch the List screen button at any time to view the available POIs.

2. Select the desired POI from the list.

3. If the system determines that the POI is found in only one city within the search area that city will automatically be selected.

If there is more than one city, the system will display the list of cities that have a POI with that name. Select a city from the list or select the Input Name screen button to input the city name.

Once all of the information is selected, a map screen will appear with the destination marked.

4. Select the

5. Select the Guide screen button. See “Getting Started on Your Route” later in this

section for more information.

h (destination) symbol screen button.

2-8

To select a POI from a category, do the following:

1. Touch the Category screen button from the POINT OF INTEREST screen to view a list of POI categories.

2. Select a category, and then a sub-category.

3. The system will display available POIs in the selected sub-category or if the list is too long the system will display the alpha keypad.

4. If the alpha keypad is displayed, input the POI name until a list of available POIs appear.

5. Select the POI from the list.

6. If the system determines that the POI is found in only one city within the search area that city will automatically be selected.

If there is more than one city, the system will display the list of cities that have a POI with that name. Select a city from the list or select the Input Name screen button to input the city name.

Once all of the information is selected, a map screen will appear with the destination marked.

7. Select the

8. Select the Guide screen button. See “Getting Started on Your Route” later in this

section for more information.

h (destination) symbol screen button.

2-9

To select a POI by inputting a city name, do the following:

1. Select the City screen button, then select: Any City, 5 Nearest Cities, Input City Name, or from the Last 5 Cities used.

• Any City — The system will request input of a

POI name, then generate a list of all cities containing that POI name. Select a city from the list.

• 5 Nearest Cities — The system will display a list

of ﬁve cities closest to your vehicle’s current position. Select a city from the list.

• Input City Name — The keypad will display for

inputting the city name. Input the city name and then select the city from the list.

• Last 5 Cities — The city names of the last ﬁve

cities that were stored as a previous destination will display. Select a city from the list.

2. Use the alpha keypad to enter the POI name. Touch Sym. (symbol) to select symbols and

numbers for the POI, touch Others to select special characters for the POI, or touch A - Z to return to the alpha keypad.

3. A list of POIs will appear using the information from the alpha keypad input. A list of available POIs will display when there are less than ﬁve POIs available. Touch the List screen button at any time to view the list of available POIs.

4. Select the desired POI from the list. A map screen will appear with the destination

marked.

5. Select the

6. Select the Guide screen button. See “Getting Started on Your Route” later in this

section for more information.

h (destination) symbol screen button.

2-10

Map

The map destination entry method allows you to select a destination by scrolling on the map.

I Select from Map: Touch this screen button from

the ENTER DESTINATION screen to enter the map destination entry method, then do the following:

1. Touch the map for the desired area you wish to set as your destination.

2. Use the zoom in/out function to view the direction of the desired area.

3. Pressing/holding and dragging on the map will activate fast scrolling. Press/touch once on the area to which you would like to move the current position mark.

Once the scroll symbol is on the location, the address information will display on the map screen.

4. Select the

5. Select the Guide screen button. See “Getting Started on Your Route” later in this

section for more information.

h (destination) symbol screen button.

2-11

Emergency

The emergency destination entry method allows you to enter a destination by selecting from three categories: Police Station, Hospital, or Dealer.

| Emergency: Touch this screen button from

the ENTER DESTINATION screen to access the EMERGENCY screen. The system will display the address, longitude, and latitude information of your vehicles current position.

To use this destination entry method, do the following:

1. Select a category. A list of destination(s) will display with the name of the destination and the distance from your vehicle’s current position.

2. Select a destination point from the list. Touch Name Sort to sort the list by name, or Dist Sort to sort the list by distance from the vehicle’s current position.

After selecting a destination from the list, a map screen will appear with the destination marked.

3. Select the

4. Select the Guide screen button. See “Getting Started on Your Route” later in this

section for more information.

h (destination) symbol screen button.

2-12

Memory Points

The memory points destination entry method allows you to select a destination from a list of points that have been previously stored.

To store, edit, and delete memory points see Stored Locations on page 2-23 for more information.

N Memory Point: Touch this screen button from the

DESTINATION ENTRY screen to access the MEMORY POINTS screen.

To use this destination entry method, do the following:

1. Select the category/folder in which the memory point has been stored. Select from PERSONAL, BUSINESS, ENTERTAINMENT, or MARKED POINT folders.

2. Sort the list by distance, icon, name or date stored.

3. Select the desired memory point. After selecting a memory point from the list, a map

screen will appear with the destination marked.

4. Select the

5. Select the Guide screen button. See “Getting Started on Your Route” later in this

section for more information.

h (destination) symbol screen button.

2-13

Previous Destination

The previous destination entry method allows you to select a destination from a list of previous destination points.

h Previous Destination: Touch this screen button

from the ENTER DESTINATION screen to access the PREVIOUS DEST screen. The system will store up to 100 points that have been previously input.

As new destinations are entered, the system will automatically delete the oldest destinations and add the new entries.

To use the previous destination entry method, do the following:

1. Select a previous destination from the list. Use the Sort by Name/Date function as necessary. Also from this menu you can select the previous start point option. This option is available while the vehicle is moving.

To use the previous start point option from the PREVIOUS DEST screen, select the Previous Start Point screen button.

2. After selecting a destination from the list, a map screen will appear with the destination marked.

3. Select the

4. Select the Guide screen button. See “Getting Started on Your Route” later in this

section for more information.

h (destination) symbol screen button.

2-14

+ 88 hidden pages