How it Works
CHAUVET DJ
Loading...
J
K
L
M
N
O
P
Q
R
S
Loading...
Loading...
Nimbus Jr.
User manual
11 pgs913.49 Kb0
Table of contents
Loading...

CHAUVET DJ Nimbus Jr. User manual

Download
User Manual
TABLE OF CONTENTS
1. Before You Begin .......................................................................................................... 3
Claims ....................................................................................................................................................... 3
2. Introduction ................................................................................................................... 6
3. Setup .............................................................................................................................. 8
About Dry Ice and CO2 ..................................................................................................................... 8
4. Operation ....................................................................................................................... 9
Safety Shutoff Feature ............................................................................................................................... 9
5. Technical Information ................................................................................................... 9
6. Technical Specifications ..............................................................................................10
Page 2 of 11 Nimbus™ Jr. User Manual Rev. 3

What Is
Included

Unpacking
Instructions

and check the container to make sure all the
included accessories) appear damaged from
missing components or parts, damage not related to shipping,
Text
1 to 512
A range of values
50/60
A set of values of which only one can be chosen

Symbols

Critical installation, configuration, or operation information. Not damage to the product, or cause harm to the operator.

Disclaimer

are subject to change ity for any errors or

1. BEFORE YOU BEGIN

Claims

Conventions
• Nimbus™ Jr.
• Power Cord
Carefully unpack the product immediately parts are in the package and are in good condition.
If the box or the contents (the product and shipping, or show signs of mishandling, notify the carrier immediately, not CHAUVET®. Failure to report damage to the carrier immediately may invalidate your claim. In addition, keep the box and contents for inspection.
For other issues, such as or concealed damage, file a claim with CHAUVET® within 7 days of delivery.
Convention Meaning
Symbol Meaning
following these instructions may make the product not work, cause
Important installation or configuration information. The product may not function correctly if this information is not used.
• Warranty Card
• Quick Reference Guide
Useful information.
The information and specifications contained in this User Manual without notice. CHAUVET® assumes no responsibility or liabil omissions, and reserves the right to revise or recreate this manual at any time. Download the latest version from
© Copyright 2014 CHAUVET®. All rights reserved.
Electronically published by CHAUVET® in the United States of America.
Author Date Editor Date
M. Trouard 07/03/14 D. Couppe 07/07/14
www.chauvetlighting.com.
Nimbus™ Jr. User Manual Rev. 3 Page 3 of 11
Product at a
x
x
x
Fixed voltage (120 VAC or 230 VAC)
P
x
x
x
x
x

Safety Notes

, use, and
exits the nozzle, keep a minimum distance of 6.5 ft (2 m) from the nozzle
) and make sure that any enclosed room
Use on Dimmer
Glance
Outdoor Use Sound-Active
DMX Master/Slave
These Safety Notes include important information about the installation maintenance; including DRY ICE WARNINGS. Read carefully!
• Always connect the product to a grounded and protected circuit to avoid the risk of electrocution.
• Always disconnect the product from the power source before cleaning.
• Make sure the power cord is not crimped or damaged.
• Never disconnect the product from power by pulling or tugging on the cord.
• Make sure there are no flammable materials close to the product when operating.
• Do not touch the product’s housing when operating because it may be very hot.
• Do not set this product on a flammable surface (linoleum, carpet, wood, paper,
carton, plastic, and so on).
• The product’s nozzle is very hot during operation and it remains hot for a long time after use. Do not touch the nozzle during or after operation (until cooled).
• When CO2 to the nearest object.
• Do not cover or plug the output nozzle during operation. Compressing the dry ice will cause a chemical reaction that may lead to an explosion.
• Do not handle dry ice with bare hands. Thick gloves must be worn.
• Do not swallow dry ice. It will lead to severe internal injuries.
• Before breaking dry ice, cover it with a piece of cloth or place the block in a cloth
bag. Eye protection must be worn.
• During warm-up and operation, the water in the Nimbus™ Jr. will be extremely hot. Do not touch or allow the water to splash to avoid scalds and burns.
• Do not remove the basket while the product is connected to power.
• Do not us in a room less than 10 sq ft (1 m
is well ventilated.
• Dry ice should never be stored in a sealed container that can lead to a pressure build-up and the risk of an explosion.
• Do not continue to create fog once visibility is 20” (50 cm) or less.
• Condensation may form on the bottom of the product, creating damp or wet
conditions under and around the Nimbus™ Jr. Use caution! Surfaces around the product may become slippery.
• Do not drink the liquid in the tank. If you do, call your local emergency service (911 in the US) for help.
• Do not add perfume, alcohol, gasoline, or any other flammables to the water.
Auto Programs
Replaceable Fuse User-Serviceable
2
Page 4 of 11 Nimbus™ Jr. User Manual Rev. 3
• Always make sure that the voltage of the outlet to which you are connecting the product is within the range stated on the decal or rear panel of the product.
• The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose the product to rain or moisture.
• Always install the product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surface s.
• Be sure that no ventilation slots on the product’s housing are blocked.
• Never connect the product to a dimmer.
• Never carry the product from the power cord or any moving part. Always use the
handles.
• Never disconnect the product from power by pulling or tugging on the cord.
• The maximum ambient temperature (Ta) is 104 °F (40 °C). Do not operate the
product at higher temperatures.
• In the event of a serious operating problem, stop using the product immediately.
• Never try to repair the product. Repairs carried out by unskilled people can lead to
damage or malfunction. Contact the nearest authorized technical assistance center.
• This product is not intended for permanent installation. Mounting in any form is not recommended. Operate the product while it is on the ground.
• Not for space heating purposes.
• The maximum water temperature should be about 175 °F (79 °C).
• Keep this User Manual for future use. If you sell the product to another user, be
sure to give this document to the next owner.
Nimbus™ Jr. User Manual Rev. 3 Page 5 of 11

2. INTRODUCTION

Overview

Carry Handles
LED
Indicators
Lid Latch
Power In
Basket/Operation
Lever
Top Plate
Output
Nozzle
Page 6 of 11 Nimbus™ Jr. User Manual Rev. 3

Dimensions

13.3 in
337 mm
15.5 in
393 mm
13.6 in
345 mm
Nimbus™ Jr. User Manual Rev. 3 Page 7 of 11

AC Power

has a fixed voltage power supply and it can work with an input voltage
circuit breaker, power outlet, and
’s back panel, or
’s specifications chart. The listed current rating indicates the
(circuit breaker or fuse). Make
an appropriate electrical ground to avoid the risk of
a rheostat (variable resistor) or dimmer circuit, even
About Dry Ice
Dry ice is a solid form of carbon dioxide. The term “dry ice” is used because of its ability
the process of transforming from a solid directly to a gas without any
When immersed in hot or boiling water, dry ice sublimates and agitates the water. The
gas causes the water vapor to form water droplets in the air. This
cold and heavy, the moisture sinks to the floor. The droplets in the air create the fog
Dry Ice
Before breaking the dry ice, cover it with a piece of cloth or place the block in a cloth

3. SETUP

The Nimbus™ Jr. of either 120 VAC, 60 Hz or 230 VAC, 50 Hz, depending on the specific model.
To determine the product’s power requirements ( wiring), use the current value listed on the label affixed to the product refer to the product product’s average current draw under normal conditions.
Always connect the product to a protected circuit sure the product has electrocution or fire.
Never connect the product to if the rheostat or dimmer channel serves only as a 0 to 100% switch.
and CO
Warnings
to sublimate —
2
liquid formation. Dry ice reaches a temperature of -189.5 °F (-87.5 °C).
released cold CO2 expansion of gas and moisture pushes its way out of the machine. Because the CO2 is
effect.
• Do not cover or plug the output nozzle during operation. Compressing the dry ice will cause a chemical reaction that may lead to an explosion.
• Do not handle dry ice with bare hands. Thick gloves must be worn.
• Do not swallow dry ice. It will lead to severe internal injuries.
•
bag. Eye protection must be worn.
• Do not use in a confined space. Make sure the room is well ventilated before beginning usage.
• Dry ice should never be stored in a sealed container that can lead to a pressure build-up and a risk of an explosion.
Page 8 of 11 Nimbus™ Jr. User Manual Rev. 3

Setup

The top plate has two LED indicators – one red and one green. The red LED indicates
heater is on, and the green LED indicates the water is at its optimal operating
As the dry ice sublimates, the water will cool and the green LED indicator will turn off.
The dry ice must be stored inside the internal basket for optimal performance. Do not

Operation

Water temperature should be about 175° F (79° C) for optimal fog output.
wait for the red LED indicator to come on before repeating Operation steps 4–7.
Safety Shutoff
safety shutoff feature, which prevents the unit’s heaters
from turning on when the water level is too low. If this safety shutoff feature has been

Maintenance

Jr. requires minimal upkeep in order to maintain optimum performance.
However, some steps are needed in order to clean and maintain the product for

4. OPERATION

that the temperature. The heater will not turn on unless there is enough water.
This is normal and the Nimbus™ Jr will continue to operate until all the dry ice is used.
remove this basket as serious bodily injury may occur.
During operation, do not touch the top plate; it becomes very hot.
1. Place the machine on a level surface and connect the product to a suitable power outlet.
2. Raise the basket to its highest level with the operation lever.
3. Open the lid and fill with water until the red light appears. The container can hold up to 2.6 gallons (9.8 liters).
4. Using protective gear, load the basket with up to 5 lb (2.3 kg) of dry ice. The dry ice should be loaded at the last possible moment.
5. Close and latch the lid.
6. Grab the operating lever and slowly lower the handle to the middle notch for low output or all the way down for high output.
7. When the output slows or stops, raise and refill the basket.
You may need to refill the Nimbus™ Jr with water from time to time. Once refilled,
The Nimbus™ Jr. is fitted with a
Feature
engaged, simply add more water to continue using the Nimbus™ Jr.

5. TECHNICAL INFORMATION

The Nimbus™ maximum usage. The recommended procedure is as follows:
1. After use, wait for the machine and any remaining water inside to reach room temperature.
2. Dump all the cooled water from the internal tank of the product. You may risk bodily harm and damage to items if the water is still hot.
Nimbus™ Jr. User Manual Rev. 3 Page 9 of 11
Dimensions and
Length
Width
Height
Weight
Full: 34 lb (15.5 kg)
Note: Dimensions in inches rounded to the nearest decimal digit.
Power
Power Supply Type
Range
Voltage Selection
Model specific
120 V, 60 Hz or 230 V, 50 Hz
Voltage specific
Parameter
120 V, 60 Hz
230 V, 50 Hz
Consumption
1,500 W
1,400 W
Operating current
12.2 A
6.2 A
Power I/O
US/Worldwide
UK/Europe
Power input connector
Edison (US)
Local plug
Heat Element
Heat-up Time
Reheat Time
20 min
10 min
Average Runtime
Tank Capacity
Dry Ice Capacity
2.5 min
2.6 gal (9.8 L)
5 lb (2.3 kg)
Thermal
Maximum External Temp.
Maximum Water Temperature
104 °F (40 °C)
175 °F (79 °C)
Ordering
Product Name
Item Code
UPC Number
Nimbus™ Jr. (120 V)
05070678
781462210267
Nimbus™ Jr. (230 V)
05070679
781462210274

6. TECHNICAL SPECIFICATIONS

Weight
15.5 in (393 mm) 13.6 in (345 mm) 13.3 in (337 mm)
Empty: 14.6 lb (6.6 kg)
Page 10 of 11 Nimbus™ Jr. User Manual Rev. 3

Returns

, United Kingdom, or Ireland, contact your distributor of
s to
Support office and request a Return
. Be prepared to
description of the cause for the
You must send the merchandise prepaid, in its original box, and with its original packing
the following information on a piece of paper
properly. Any shipping damage resulting from inadequate
reserves the right to use its own discretion to repair or replace

Contact Us

Fax: +44 (0)1773 511110
Email: tech@chauvetlighting.com
www.chauvetlighting.com
www.chauvetlighting.co.uk
To return a product or reques t supp ort :
• In the U.S., contact CHAUVET® World Headquarters (see below).
• In the UK or Ireland, contact CHAUVET® Europe Ltd. (see b elow ) .
• In any other country, DO NOT contact CHA UV E T®. Contact your distributor. See
www.chauvetlighting.com
for distributors outside the U.S., United Kingdom, or
Ireland.
If you live outside the U.S. record and follow their instructions on how to return CHAUVET® product them. Visit our website for contact details.
Call the corresponding CHAUVET® Technical Merchandise Authorization (RMA) number before shipping the product provide the model number, serial number, and a brief return.
and accessories. CHAUVET® will not issue call tags. Clearly label the package with the RMA number. CHAUVET® will refuse any product
returned without an RMA number.
Write the RMA number on a properly affixed label. DO NOT write the RMA number directly on the box.
Before sending the product, clearly write and place it inside the box:
• Your name
• Your address
• Your phone number
• RMA number
• A brief description of the problem
Be sure to pack the product packaging will be your responsibility. FedEx packing or double-boxing are recommended.
CHAUVET® returned product(s).
World Headquarters
CHAUVET® General Information
Address: 5200 NW 108th Avenue Sunrise, FL 33351 Voice: (954) 577-4455 Fax: (954) 929-5560 Toll free: (800) 762-1084
Technical Support
Voice: (954) 577-4455 (Press 4) Fax: (954) 756-8015
United Kingdom & Ireland
CHAUVET® Europe Ltd. General Information
Address: Unit 1C Brookhill Road Industrial Estate Pinxton, Nottingham, UK NG16 6NT Voice: +44 (0)1773 511115
Technical Support
Email: uktech@chauvetlighting.com
World Wide Web
Nimbus™ Jr. User Manual Rev. 3 Page 11 of 11
World Wide Web
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use