Page 1
User Manual
Set Includes
LED Drape
LED Façade
Motion Set™ LED Controller
Page 2
TABLE OF CONTENTS
1. Before You Begin .......................................................................................................... 3
What Is Included ............................................................................................................................... 3
Unpacking Instructions ..................................................................................................................... 3
Claims ....................................................................................................................................................... 3
Text Conventions ............................................................................................................................. 3
Symbols ............................................................................................................................................ 3
Disclaimer ......................................................................................................................................... 3
Product at a Glance .......................................................................................................................... 4
Safety Notes ..................................................................................................................................... 4
2. Introduction ................................................................................................................... 5
Overview ........................................................................................................................................... 5
Dimensions ....................................................................................................................................... 6
3. Setup .............................................................................................................................. 7
AC Power ......................................................................................................................................... 7
Fuse Replacement .................................................................................................................................... 7
Mounting ........................................................................................................................................... 8
Orientation ................................................................................................................................................. 8
Rigging ...................................................................................................................................................... 8
4. Operation ....................................................................................................................... 9
Control Panel Operation ................................................................................................................... 9
Menu Map ......................................................................................................................................... 9
Configuration (DMX) ......................................................................................................................... 9
Starting Address ........................................................................................................................................ 9
DMX Channel Modes, Assignments, and Values .......................................................................... 10
8-Channel ................................................................................................................................................ 10
Configuration (Standalone) ............................................................................................................ 11
Sound Mode ............................................................................................................................................ 11
Automatic Mode ....................................................................................................................................... 11
Speed ...................................................................................................................................................... 11
Program ................................................................................................................................................... 11
Software Version ..................................................................................................................................... 11
Master/Slave Mode .................................................................................................................................. 12
5. Technical Information ..................................................................................................13
Product Maintenance ..................................................................................................................... 13
6. Technical Specifications ..............................................................................................14
Returns .............................................................................................................................15
Contact Us ........................................................................................................................16
Page 2 of 16 Motion Set™ LED User Manual Rev. 2
Page 3
What Is
Unpacking
Instructions
and check the container to make sure all the
included accessories) appear damaged from
missing components or parts, damage not related to shipping,
Text
1 to 512
A range of values
50/60
A set of values of which only one can be chosen
Settings
A menu option not to be modified
Menu > Settings
A sequence of menu options to be followed
<ENTER>
A key to be pressed on the product’s control panel
ON
A value to be entered or selected
Symbols
Critical installation, configuration, or operation information. Not
damage to the product, or cause harm to the operator.
Disclaimer
are subject to change
ity for any errors or omissions,
and reserves the right to revise or recreate this manual at any time. Download the latest
1. BEFORE YOU BEGIN
Included
Claims
Conventions
• LED Drape
• LED Façade
• Motion Set™ LED Controller
• Power Cord
Carefully unpack the product immediately
parts are in the package and are in good condition.
If the box or the contents (the product and
shipping, or show signs of mishandling, notify the carrier immediately, not Chauvet.
Failure to report damage to the carrier immediately may invalidate your claim. In
addition, keep the box and contents for inspection.
For other issues, such as
or concealed damage, file a claim with Chauvet within 7 days of delivery.
Convention Meaning
Symbol Meaning
• Carrying Bag
• Replacement LEDs
• Warranty Card
• Quick Reference Guide
The information and specifications contained in this User Manual
without notice. Chauvet assumes no responsibility or liabil
version from www.chauvetlighting.com.
© Copyright 2014 Chauvet. All rights reserved.
Electronically published by Chauvet in the United States of America.
Author Date Editor Date
A. Leon 12/31/14 M. Trouard 12/31/14
following these instructions may make the product not work, cause
Important installation or configuration information. The product
may not function correctly if this information is not used.
Useful information.
Motion Set™ LED User Manual Rev. 2 Page 3 of 16
Page 4
Product at a
x
P
x
P
P
P
P
x
P
Safety Notes
Do not touch the product’s housing when operating because it may be very hot.
completely disconnect the product from power via breaker or by unplugging it.
Glance
Use on Dimmer
Outdoor Use
Sound-Active
DMX
Master/Slave
These notes i nclude important information about the mounting, usage, and maintenance
of this product; read before using the product.
• Always connect the product to a grounded circuit to avoid the risk of electrocution.
• Always disconnect the product from the power source before cleaning or replacing
the fuse.
• Make sure the power cord is not crimped or damaged.
• Never disconnect the product from power by pulling or tugging on the cord.
• If mounting the product overhead, always secure to a fastening device using a
safety cable.
• Make sure there are no flammable materials close to the product when operating.
•
• Always make sure that the voltage of the outlet to which y ou are conne cti ng the
product is within the range stated on the decal or rear panel of the product.
• The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not
expose the product to rain or moisture.
• Always install the product in a location with adequate ventilation, at least 20 in
(50 cm) from adjacent surfaces.
• Be sure that no ventilation slots on the product’s housing are blocked.
• Never connect the product to a dimmer.
• Make sure to replace the fuse with another of the same type and rating.
• Never carry the product from the power cord or any moving part.
• The maximum ambient temperature (Ta) is 104° F (40° C). Do not operate the
product at higher temperatures.
• In the event of a serious operating problem, stop using the product immediately.
• Never try to repair the product. Repairs carried out by unskilled people can lead to
damage or malfunction. Contact the nearest authorized technical assistance center.
• This product is not intended for permanent installation.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use
Auto Programs
Auto-ranging Power Supply
Replaceable Fuse
User-Serviceable
• This product is NFPA-certified fire-retardant material.
• Keep this User Manual for future use. If you sell the product to another user, be
sure to give this document to the next owner.
Page 4 of 16 Motion Set™ LED User Manual Rev. 2
Page 5
2. INTRODUCTION
Overview
Motion Set™ Controller
Front Panel
LED Display
Motion Set™ LED Controller
Top Panel
DMX In
On/Off
Switch
Power
In
LED Drape
Input
LED Drape
DMX Out
Button Menu
Fuse
Holder
LED Façade
Input
LED Façade
Motion Set™ LED User Manual Rev. 2 Page 5 of 16
Page 6
Dimensions
6.6 ft
(2 m)
4 ft
(1.22 m)
LED Drape
Motion Set™ LED Controller
(135 mm)
5.3 in
6.6 ft
(2 m)
2 in
(50 mm)
9.6 in
(243 mm)
LED Façade
9.8 ft
(3 m)
Page 6 of 16 Motion Set™ LED User Manual Rev. 2
Page 7
AC Powe r
ranging power supply and it can work with an input
circuit breaker, power outlet, and
’s back panel, or
dicates the
(circuit breaker or fuse). Make
an appropriate electrical ground to avoid the risk of
a rheostat (variable resistor) or dimmer circuit, even
Fuse
Installed fuse
(held by plastic clip)
Spare fuse holder
(inside safety cap)
Safety cap
3. SETUP
The Motion Set™ LED has an au tovoltage range of 100 to 240 VAC, 50/60 Hz.
To determine the product’s power requirements (
wiring), use the current value listed on the label affixed to the product
refer to the product’s specifications chart. The listed current rating in
product’s average current draw under normal conditions.
Always connect the product to a protected circuit
sure the product has
electrocution or fire.
Never connect the product to
if the rheostat or dimmer channel serves only as a 0 to 100% switch.
Replacement
Disconnect the product from power before replacing the fuse.
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the fuse holder out of the housing.
4. Remove the blown fuse from the holder.
5. Replace with a fuse of the exact same type and rating.
6. Insert the fuse holder ba ck in place and reconnect power.
A spare fuse is not included; however, the safety cap has room for a spare.
Always replace a blown fuse with another of the same type and rating.
Motion Set™ LED User Manual Rev. 2 Page 7 of 16
Page 8
Mounting
, read and follow the safety recommendations indicated in
, make sure adequate
31 portable truss or any
Controller are included here
Grommets for easy truss mounting
and various stand applications
LED Drape
Grommets for easy truss mounting
and various stand applications
Motion Set™ LED
Controller
8.75 in
(222.25 mm)
3.5 in
(88.9 mm)
Mounting
(4)
Before mounting the product
the Safety Notes.
Orientation
The Motion Set™ LED may be mounted in any position; however
ventilation is provided around the produc t .
Rigging
• Before deciding on a location, always make sure there will be easy access to the
product for maintenance and programming.
• Make sure that the structure or surface onto which you are mounting the product can
support the product’s weight (see Technical Specifications
).
• When mounting the product overhead, always use a safety cable. Mount the product
securely to a rigging point, such as an elevated platform or a truss.
• Reusable zip ties (tie wraps) are provided with the Motion Set™ LED for quick and easy
mounting.
The LED Drape can be used with the CHAUVET® CHsimilar portable trussing system.
The dimensions for mounting the Motion Set™ LED
to aid in installation.
Mounting Diagram
LED Façade
Points
Page 8 of 16 Motion Set™ LED User Manual Rev. 2
Page 9
Control Panel
Operation
control panel functions, use the four buttons located underneath the
<UP>
Menu Map
No
Yes
Note: Be sure to connect the LED Drape to the Drape input on the Motion Set™
Façade input
™ LED controller. If you connect either to the wrong input, they
will not function.
Configuration
selecting a starting DMX address, always consider the number of DMX channels
choose a starting address that is too high, you could
DMX mode, which
download the DMX Primer from
4. OPERATION
To access the
display.
Button Function
<MENU>
Selects an operation mode or backs out of the current menu option
Scrolls up the list of options or selects a higher value
<DOWN>
<ENTER>
Scrolls down the list of options or selects a lower value
Activates a menu option or a selected value
Main Level Programming Levels Description
Version
Automatic
Sound
Dmx512
Speed 1—9
Program 1—30
X.X
Yes
No
No
Yes 001—512
No
Yes
Shows the software version number
Disables automatic mode function
Enables automatic mode function
Disables sound mode function
Enables sound mode function
Disables DMX mode function
Enables DMX mode and sets starting
address
Selects the automatic mode ’s program speed
Disables numbered program running in
sequence in automatic or sound mode
Enables numbered program running in
sequence in automatic or sound mode
LED controller. Likewise, be sure to connect the LED Façade to the
on the Motion Set
Set the product in DMX mode to control with a DMX controller.
(DMX)
1. Connect the product to a suitable power outlet.
2. Turn the product on.
3. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
Starting Address
When
the selected DMX mode uses. If you
restrict the access to some of the product’s channels.
The Motion Set™ LED uses up to 8 DMX channels in its 8-channel
defines the highest configurable address to 505.
If unfamiliar with DMX or DIP switches,
www.chauvetlighting.com.
To select the DMX mode and starting address, do the following:
1. Press <MENU> repeatedly until Dmx512 shows on the display.
2. Press <ENTER> and Yes (enables DMX mode) or No (disables DMX mode) shows
on the display.
3. If not already selected, use <UP> to select Yes.
4. Press <ENTER> and Address 001—512 shows on the display.
5. Use <UP> or <DOWN> to select the desired starting address.
Motion Set™ LED User Manual Rev. 2 Page 9 of 16
6. Press <ENTER>.
Page 10
DMX Channel Modes, Assignments, and Values
000 ó 007
008 ó 255
No function
0 to 100%
000 ó 010
011 ó 255
No function
0 to 100%
3
Red
000 ó 255
0 to 100%
4
Green
000 ó 255
0 to 100%
5
Blue
000 ó 255
0 to 100%
000 ó 015
240 ó 255
No function
Multi box Frenzy
000 ó 015
240 ó 255
No function
Multi Rain
8
Speed
000 ó 255
Slow to fast
8-Channel
Channel Function Value Setting
1 Dimmer
2 Strobe
6 Programs 1—15
7 Program 16—30
016 ó 031
032 ó 047
048 ó 063
064 ó 079
080 ó 095
096 ó 111
112 ó 127
128 ó 143
144 ó 159
160 ó 175
176 ó 191
192 ó 207
208 ó 223
224 ó 239
016 ó 031
032 ó 047
048 ó 063
064 ó 079
080 ó 095
096 ó 111
112 ó 127
128 ó 143
144 ó 159
160 ó 175
176 ó 191
192 ó 207
208 ó 223
224 ó 239
Falling Star
Diagonal Color Bands
Color Pattern Chase
Inward Arrow (L-R)
Color Stack
Multi-Color Freeway
Color Wave (L-R)
Color Wave (R-L)
Color Bar Chase (L-R)
Color Bar Chase (R-L)
Windmill
Fan
Whirlpool
Falling Snow
Center Burst
Outer Burst
EQ Effect
Rolling Color
Horizontal Snow
Inner Zone
Outer Zone
Diamond Spread
Single Diamond Squeeze
Follow The Leader
Crisscross
X-Factor
Double Diamond Squeeze
Red X-Factor
Page 10 of 16 Motion Set™ LED User Manual Rev. 2
Page 11
Configuration
Static,
s in
standalone mode may transmit DMX signals that could interfere with the DMX
(Standalone)
Set the product in one of the standalone modes to contr ol without a DMX controller.
1. Connect the product to a suitable power outlet.
2. Turn the product on.
Never connect a product that is operating in any standalone mode (
Automatic, or Sound) to a DMX string connected to a DMX controller. Product
signals from the controller.
Sound Mode
Automatic Mode
Speed
Program
To enable the Sound mode, do the following:
1. Press <MENU> repeatedly until Sound Yes (enable s Sound mode) or Sound No
(disables Sound mode) shows on the display.
2. Press <ENTER>.
3. If not already selected, use <UP> to select Yes.
4. Press <ENTER>.
The product will only respond to low frequencies of music (bass and drums).
To enable the Automatic mode, follow the instructions below:
1. Press <MENU> repeatedly until Automatic Yes (enables Automatic mode) or
Automatic No (disables Automatic mode) shows on the display.
2. Press <ENTER>.
3. If not already selected, use <UP> to select Yes.
4. Press <ENTER>.
To set the Automatic mode’s program speed, do the following:
1. Press <MENU> repeatedly until Speed 1—9 shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the desired speed.
4. Press <ENTER>.
To select the numbered program running in sequence in Automatic or Sound mode,
follow the instructions below:
1. Press <MENU> repeatedly until Program shows on the display.
2. Press <ENTER> repeatedly until the desired program (Program 1—30) shows on
the display.
3. Use <UP> or <DOWN> to select Yes (enables the numbered program) or No
(disables the numbered program).
4. Press <ENTER>.
5. Repeat steps 2—4 for all numbered programs.
Software Version
To view the version number of the software installed on the Motion Set™ LED, follow the
instructions below:
1. Press <MENU> repeatedly until Version shows on the display.
2. Press <ENTER>.
3. Press <UP> and the software version shows on the display. (Press <DOWN> and
the software version disappears from the display.)
Motion Set™ LED User Manual Rev. 2 Page 11 of 16
Page 12
Master/Slave
unit (the “master”) to control
units (the “slaves”) without the need of a
be set to operate in either Automatic or Sound
ode. Once set and
all the slave units before connecting the master unit to the DMX
Never connect a DMX controller to a DMX string configured for Master/Slave
may interfere with the signals from the
The Master/Slave mode allows a single Motion Set™ LED
Mode
the actions of one or more Motion Set™ LED
DMX controller. The master unit will
mode, while the slave units will be set to operate in Slave m
connected, the slave units will operate in unison with the master unit.
Configure the units as indicated below.
Slave units:
1. Set the DMX address to 001.
2. Connect the DMX input of the first slave unit to the DMX output of the master unit.
3. Connect the DMX input of the subsequent slave units to the DMX output of the
previous slave unit.
4. Finish setting and connecting all the slave units.
Master unit:
1. Set the master unit to operate in either Automatic or Sound mode .
2. Make the master unit the first unit in the DMX daisy chain.
• Configure
daisy chain.
•
operation because the controller
master unit.
• Do not connect more than 31 slave units to the master unit.
Page 12 of 16 Motion Set™ LED User Manual Rev. 2
Page 13
Product
up reduces light output performance and can cause overheating. This can
life and wear. To maintain optimum performance
sage and
Always dry the external optics and glass/transparent surfaces carefully after
5. TECHNICAL INFORMATION
Dust build-
Maintenance
lead to reduction of the light source’s
and minimize wear, clean the product at least twice a month. However, u
environmental conditions contribute to increased cleaning frequency.
To clean the product, follow the instructions below:
1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on
the external vents and reachable components.
4. Clean all external optics and glass surfaces with a mild solution of glass cleaner or
isopropyl alcohol.
Note: Do not apply isopropyl alcohol onto the fabric of the LED Drape or LED
Façade.
• Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
• Softly wipe away any dirt and grime.
• Gently polish the external glass surfaces until they are free of haze and lint.
cleaning them.
Motion Set™ LED User Manual Rev. 2 Page 13 of 16
Page 14
Dimensions
Length (Controller)
Width (Controller)
Height (Controller)
Weight (Controller)
5.3 in (135 mm)
9.6 in (243 mm)
2.0 in (50 mm)
2.2 lb (1.1 kg)
Length (LED Drape)
Width (LED Drape)
Weight (LED Drape)
6.6 ft (2 m)
9.8 ft (3 m)
9.8 lb (4.4 kg)
Length (LED Façade)
Width (LED Façade)
Weight (LED Façade)
4 ft (1.22 m)
6.6 ft (2 m)
3.9 lb (1.7 kg)
Note: Dimensions in inches rounded to the nearest decimal digit.
Power
Power Supply Type
Range
Voltage Selection
Switching (internal)
100 to 240 V, 50/60 Hz
Auto-ranging
Parameter
120 V, 60 Hz
230 V, 50 Hz
Consumption
49 W
57 W
Operating current
0.4 A
0.2 A
Fuse
F 2 A, 250 V
F 2 A, 250 V
Power I/O
US/Worldwide
UK/Europe
Power input connector
IEC
IEC
Power Cord plug
Edison (US)
Local plug
Light Source
Type
Quantity (LED Drape)
Lifespan
SMD LED
176
50,000 hours
Color
Quantity (LED Façade)
Current
Tri-color RGB
66
20 mA
Thermal
Maximum External Temp.
Cooling System
104° F (40° C)
Convection
DMX
I/O Connectors
Connector Type
Channel Range
3-pin XLR
Sockets
8
Ordering
Product Name
Item Code
UPC Number
Motion Set™ LED
15090672
781462210205
6. TECHNICAL SPECIFICATIONS
and Weight
Note: Unless otherwise indicated, all specifications are applicable to both the LED Façade and LED
Drape.
Page 14 of 16 Motion Set™ LED User Manual Rev. 2
Page 15
R
To return a product or request support:
If you live outside the U.S., United Kingdom, Ireland, or Mexico, contact your distributor of
products to them. Visit our
Call the corresponding Chauvet Technical Support office and request a Return Merchandise
without an RMA number.
Write the RMA number on a properly affixed label. DO N O T wr ite the RMA numb e r directly on
Before sending the product, clearly write the following information on a piece of paper and place
packaging will be your responsibility. FedEx packing or double-boxing are recommended.
Chauvet reserves the right to use its own discretion to repair or replace returned product(s).
ETURNS
• In the U.S., conta ct Chauvet World Headquarters (see Contact Us).
• In the UK or I r elan d, con ta ct Chauvet Europe Ltd. (see Contact Us).
• In Mexico, contact Chauvet Mexico (see Contact Us).
In any other country , DO NOT conta ct Chauvet. Contact your distributor. See
www.chauvetlighting.com
record and follow their instructions on how to return Chauvet
website for contact details.
Authorization (RMA) number before shipping the product. Be prepared to provide the model
number, serial number, and a brief description of the cause for the return.
You must send the merchandise prepaid, in its original box, and with its original packing and
accessories. Chauvet will not issue call tags.
Clearly label the package with the RMA number. Chauvet will refuse any product returned
the box.
it inside the box:
1. Your name
2. Your address
3. Your phone number
4. RMA number
5. A brief description of the problem
Be sure to pack the product properly. Any shipping damage resulting from inadequate
for distributors outside the U.S., United Kingdom, Ireland, or Mexico.
Motion Set™ LED User Manual Rev. 2 Page 15 of 16
Page 16
C
WORLD HEADQUA R TERS - Chauvet
General Information
Toll free: (8 00) 762-1084
Techni ca l S u pp o r t
World Wide Web www.chauvetlighting.com
UNITED KIN GDOM AND IRE LAND - Chauvet Europe Ltd.
General Information
Fax: +44 (0)1773 511110
Techni ca l S u pp o r t
MEXICO - Chauvet Mexico
General Information
Voice: +52 (728) 285-5000
Techni ca l S u pp o r t
Outside the U.S., United Kingdom, Ireland, or Mexico, contact your dealer. Follow their
instructions to request support or to return a product. Visit our website for contact details.
ONTACT
US
Address:5200 NW 108th Avenue
Sunrise, FL 33351
Voice: (954) 577-4455
Fax: (954) 929-5560
Address:Unit 1C
Brookhill Road I ndu s trial E sta te
Pinxton, Nottingham, UK
NG16 6NT
Voice: +44 (0)1773 511115
Address:Av. Santa Ana 30
Parque Indust rial Le rma
Lerma, Mexico C.P. 52000
Voice: (954) 577-4455 (Press 4)
Fax: (9 54) 756-8015
Email: tech@chauvetlighting.com
Email: uktech@chauvetlighting.com
World Wide Web www.chauvetlighting.co.uk
Email: servicio@chauvet.com.mx
World Wide Web www.chauvet.com.mx
Page 16 of 16 Motion Set™ LED User Manual Rev. 2
Loading...