User Manual
TABLE OF CONTENTS
1. Before You Begin .......................................................................................................... 3
What Is Included ............................................................................................................................. 3
Unpacking Instructions .................................................................................................................... 3
Claims ..................................................................................................................................................... 3
Text Conventions ............................................................................................................................ 3
Symbols .......................................................................................................................................... 3
Disclaimer ....................................................................................................................................... 3
Product at a Glance ........................................................................................................................ 4
Safety Notes .................................................................................................................................... 4
2. Introduction ................................................................................................................... 5
Product Overview ............................................................................................................................ 5
Product Dimensions ........................................................................................................................ 6
3. Setup .............................................................................................................................. 7
AC Power ........................................................................................................................................ 7
Fuse Replacement .......................................................................................................................... 7
Power Linking ......................................................................................................................................... 7
Mounting ......................................................................................................................................... 8
Orientation .............................................................................................................................................. 8
Rigging ................................................................................................................................................... 8
4. Operation ....................................................................................................................... 9
Control Panel Operation.................................................................................................................. 9
Menu Map ....................................................................................................................................... 9
DMX Linking .................................................................................................................................... 9
Configuration (DMX) ....................................................................................................................... 9
Starting Address ..................................................................................................................................... 9
DMX Channel Assignments and Values ....................................................................................... 10
4CH ...................................................................................................................................................... 10
Configuration (Standalone) ........................................................................................................... 10
Automatic Mode (including Sound-Active Mode) .................................................................................. 10
Color Control and Strobe ...................................................................................................................... 11
Display Orientation ............................................................................................................................... 11
Display Time-Out .................................................................................................................................. 11
Software Version .................................................................................................................................. 11
IRC-6 Infrared Remote Control ..................................................................................................... 12
IRC-6 Operation.................................................................................................................................... 12
Linking IRC Control With the Mini Kinta™ ............................................................................................ 12
Master/Slave Mode ............................................................................................................................... 13
5. Maintenance .................................................................................................................14
Product Maintenance .................................................................................................................... 14
6. Technical Specifications ..............................................................................................15
Returns .......................................................................................................................................... 16
Contact Us ........................................................................................................................17
Page 2 of 17 Mini Kinta™ IRC User Manual Rev. 2
1.BEFORE YOU BEGIN
What Is
Included
Unpacking
Instructions
check the container to make sure all the
If the box or the contents (the product and included accessories) appear damaged from
For other issues, such as missing components or parts, damage not related to shipping, or
Text
1—512
A range of values
50/60
A set of values of which only one can be chosen
Settings
A menu option not to be modified
Menu > Settings
A sequence of menu options to be followed
<ENTER>
A key to be pressed on the product’s control panel
ON
A value to be entered or selected
Symbols
Critical installation, configuration, or operation information. Not
damage to the product, or cause harm to the operator.
Disclaimer
The information and specifications contained in this document are subject to change
assumes no responsibility or liability for any errors or omissions
Claims
Conventions
• Mini Kinta™ IRC
• Power Cord
Carefully unpack the product immediately and
parts are in the package and are in good condition.
shipping, or show signs of mishandling, notify the carrier immediately, not Chauvet. Failure
to report damage to the carrier immediately may inv alidate y our claim. In addition, keep the
box and contents for inspection.
concealed damage, file a claim with Chauvet within 7 days of delivery.
Convention Meaning
Symbol Meaning
following these instructions may make the product not work, cause
• Warranty Card
• Quick Reference Guide
Important installation or configuration information. The product
may not function correctly if this information is not used.
Useful information.
without notice. Chauvet
that may appear in this manual. Chauvet reserves the right to update the existing
document or to create a new document to correct any er rors o r omissions .
You can download the latest version of this docume nt f rom www.chauvetlighting.com.
© Copyright 2015 Chauvet. All rights reserved.
Electronically published by Chauvet in the United States of America.
Author Date Editor Updated
A. Leon 04/02/15 R.Isenstadt 04/02/15
Mini Kinta™ IRC User Manual Rev. 2 Page 3 of 17
Product at a
x
P
x
P
P
P
P
x
P
Safety Notes
Do not touch the product’s housing when operating because it may be very hot.
completely disconnect the product from power via breaker or by unplugging it.
Glance
Use on Dimmer
Outdoor Use
Sound-Active
DMX
Master/Slave
Please read the following Safety Notes carefully before working with the product. The
Notes include important safety information about instal lation, usage, and maintenance.
• Always connect the product to a grounded circuit to avoid the risk of electrocution.
• Always disconnect the product from the power source before cleaning or replacing
the fuse.
• Avoid direct eye exposure to the light source while the product is on.
• Make sure the power cord is not crimped or damaged.
• Never disconnect the product from power cord by pulling or tugging on the cord.
• If mounting the product overhead, always secure to a fastening device using a
safety cable.
• Make sure there are no flammable materials close to the product when operating.
•
• The product is not intended for permanent installation.
• Always make sure that the voltage of the outlet to which you are connecting the
product is within the range stated on the decal or rear panel of the product.
• The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not
expose the product to rain or moisture.
• Always install the product in a location with adequate ventilation, at least 20 in
(50 cm) from adjacent surfaces.
• Be sure that no ventilation slots on the product’s housing are blocked.
• Never connect the product to a dimmer.
• Make sure to replace the fuse with another of the same type and rating.
• Never carry the product from the power cord or any moving part. Always use the
hanging/mounting bracket.
• The maximum ambient temperature (Ta) is 104 °F (40 °C). Do not operate the
product at higher temperatures.
• In the event of a serious operating problem, stop using the product immediately.
• Never try to repair the product. Repairs carried out by unskilled people can lead to
damage or malfunction. Please contact the nearest authorized technical assistance
center.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use
Auto Programs
Auto-ranging Power Supply
Replaceable Fuse
User-Serviceable
Keep this User Manual for future use. If you sell the product to someone else, be sure
that they also receive this document.
Page 4 of 17 Mini Kinta™ IRC User Manual Rev. 2
2. INTRODUCTION
Product Overview
DMX In/Out
Power In
Microphone
Indicator LEDs
Power Out
Safety Loop
Fuse
Holder
Menu Display
Menu Buttons
Cooling Fan
Back Panel View
Lenses
IR Sensor
Sound
Sensitivity
Mini Kinta™ IRC User Manual Rev. 2 Page 5 of 17
Front View
Product Dimensions
9.1 in
241 mm
7.25 in
184 mm
7.5 in
191 mm
Page 6 of 17 Mini Kinta™ IRC User Manual Rev. 2
AC Power
ranging power supply and it can work with an input
power
circuit breaker, power outlet, and wiring), use the current value listed on the
’s specifications chart. The
(circuit breaker or fuse). Make
has an appropriate electrical ground to avoid the risk of
to a rheostat (variable resistor) or dimmer circuit, even if
Fuse
outlet located in the back of the unit.
Power Linking
s on 120 VAC or up to
in other markets, you must consult with the
distributor as power linking connectors and requirements may differ
1st Product
2nd Product
3rd Product
Additional Products
Installed fuse
(held by plastic clip)
Spare fuse holder
(inside safety cap)
Safety cap
3. SETUP
Replacement
The Mini Kinta™ IRC has an autovoltage range of 100 to 240 VAC, 50/60 Hz. To determine the product’s
requirements (
label affixed to the product’s back panel, or refer to the product
listed current rating indicates the product’s aver age c urrent dra w under normal conditions.
Always connect the product to a protected circuit
sure the product
electrocution or fire.
Never connect the product
the rheostat or dimmer channel serves o nly as a 0 t o 100% switch.
1. Wedge the tip of a flat-head screw driver into t he slot of the fus e holder.
2. Pry the fuse holder out of the housing.
3. Remove the blown fuse from the holder and repla ce with a fuse of the exact same
type and rating.
4. Insert the fuse holder back in place and recon nect power.
Disconnect the product from the power outlet before replacing the fuse.
Power Linking
The product provides power linking via the Edison
Please see the diagram below for further explanation.
Diagram
You can power link up to 29 Mini Kinta™ IRC unit
53 Mini Kinta™ IRC units on 230 VAC.
The power linking diagram corresponds to the North American version of the
Mini Kinta™ IRC User Manual Rev. 2 Page 7 of 17
product ONLY! If using the product
local Chauvet
in your country or region.
Mounting
, read and follow the safety recommendations indicated in the
may be mounted in any position; however, make sure adequate
of appropriate weight
power
knobs allow for directional adjustment when aiming the
Mounting Clamp
(such as the CLP-15N from Chauvet)
Bracket Adjustment
Knob x 2
Before mounting the product
Safety Notes.
Orientation
Rigging
Mounting Diagram
The Mini Kinta™ IRC
ventilation is provided around the product.
• Before deciding on a location for the product, always make sure there is easy access
to the product for maintenance and progr amming pur pose s.
• Make sure that the structure onto which you are mounting the product can support the
product’s weight. See the T echnical Specif ications for weight information.
• When mounting the product overhead, always use a safety cable. Mount the product
securely to a rigging point, whether an elev ated plat form or a truss.
• When rigging the product onto a truss, use a mounting clamp
capacity.
• When power linking multiple products, mount the products close enough for
linking cables to reach.
• The bracket adjustment
product to the desired angle. Only loosen or tighten the bracket knobs manually.
Using tools could damage the knobs.
Mounting Bracket
Safety Cable
(such as CH-05 from Chauvet)
Page 8 of 17 Mini Kinta™ IRC User Manual Rev. 2
Control Panel
Operation
<ENTER>
Menu Map
Mode
Programming Steps
Description
DMX Mode
Addr
A001–A509
Selects the DMX starting address
Slave Mode
SLnd
SL-1
Sets slave mode
Auto/Sound Modes
Auto
Aut
Sets Auto/Sound mode
r000–r255
Adjusts red value 0–100%
G000–G255
Adjusts green value 0–100%
b000–b255
Adjusts blue value 0–100%
U000–U255
Adjusts white value 0–100%
Str1
Selects Strobe 1 (slow)
Str3
Selects Strobe 3 (fast)
on
Sets Display to turn off after inactivity
oFF
Sets Display to stay on at all times
dISP
Normalizes Display
dSIP
Inverts Display
Software Version
uEr
XX.XX
Displays the software version
DMX Linking
works with a DMX controller. Information about DMX is in the
Configuration
When selecting a starting DMX address, always consider the number of DMX channels the
choose a starting address that is too high, you could
which defines the
4. OPERATION
To access the control panel functions, use the four buttons located underneath the display.
Please refer to the Product Overview to see the button locations on the control panel.
Button Function
<MENU>
<UP>
<DOWN>
Press to find an operation mode or to back out of the current menu
option
Press to scroll up the list of options or to find a higher value
Press to scroll down the list of options or to find a lower value
Press to activate a menu option or a selected value
Color Control and
Strobe
Display Time-out LEd
Display Orientation dISP
CoLo
Str2
The Mini Kinta™ IRC
CHAUVET® DMX Primer, which is available from the Chauvet website
http://www.chauvetlighting.com/downloads/DMX_Primer_rev05_WO.pdf.
Set the product in DMX mode to control w it h a DMX controller.
(DMX)
1. Connect the product to a suitable power outlet.
2. Connect a DMX cable from the DMX output of t he DMX contr oller to the D M X input
socket on the product.
Starting Address
selected DMX mode uses. If you
restrict the access to some of the product’s channels.
The Mini Kinta™ IRC uses up to 4 DMX channels in a 4-CH DMX mode,
highest configurable address to 509.
If you are not familiar with the DMX protocol, download the DMX Primer from
www.chauvetlighting.com.
To select the starting address, do the follow ing:
1. Press <MENU> repeatedly until Addr shows on the display.
2. Press <ENTER> and A001–A509 will show on the display.
3. Use <UP> or <DOWN> to select the starting address.
4. Press <ENTER>.
Selects Strobe 2 (medium)
Mini Kinta™ IRC User Manual Rev. 2 Page 9 of 17
DMX Channel Assignments and V alues
4CH
000ó005
No function
006ó020
Red 021ó035
Green 036ó050
Blue 051ó065
White 066ó080
Red/Green
081ó095
Red/Blue
096ó110
Red/White
111ó125
Green/Blue
126ó140
Green/White
141ó155
Blue/White
156ó170
Red/Green/Blue
171ó185
Red/Green/White
186ó200
Green/Blue/White
201ó215
Red/Green/Blue/White
216ó229
Automatic (slow 4-color chase)
230ó255
Automatic ( fast 7-color combo chase)
000ó005
No strobe
006ó255
Strobe (slow to fast)
000ó127
Motor indexing
128ó255
Motor speed
000ó004
No function
005ó200
Auto mode (slow to fast)
201ó255
Sound mode
Configuration
(Standalone)
to a DMX string
s in standalone mode may transmit DMX
Automatic Mode
Channel Function Value Percent/Setting
Control/
1
Operating Mode
2
3
4
Set the product in one of the standalone mo des to c ont rol without a DMX controller.
• Connect the product to a suitable power outlet.
Never connect a product that is operating in any standalone mode
connected to a DMX controller. Product
signals that could interfere with the DMX signals from the controller.
To run the Mini Kinta™ IRC in automatic mode, follow the instructions below:
(including Sound-
Active Mode)
1. Press <MENU> repeatedly until Auto shows on the display.
2. Press <ENTER> and Aut will show on the display.
3. Turn the music on and adjust the sound se nsitiv ity knob until the product responds to
the beat of the music.
The product will only respond to low frequencies of music (bass and drums).
Strobe
Motor Rotation
Auto/Sound Mode
Page 10 of 17 Mini Kinta™ IRC User Manual Rev. 2
Color Control and
Display
Display Time-Out
Software Version
Strobe
Orientation
To custom mix a color and select the strobe speed, follow the i nstr uctions below:
1. Press <MENU> repeatedly until CoLo shows on the display.
2. Press <ENTER> and one of the following will show on the display:
• rxxx (red, 000-255)
• Gxxx (green, 000-255)
• bxxx (blue, 000-255)
• Uxxx (white, 000-255)
• Str1 (slow strobe)
• Str2 (medium strobe)
• Str3 (fast strobe)
3. Press <ENTER> to cycle through the color and strobe speed settings.
4. With the color options, when the desired color shows on the display, use <UP> or
<DOWN> to select the desired color value.
NOTE: Selecting 0 will turn the color off.
5. Repeat steps 3 and 4 until you have your desired color.
6. To select strobe speed, press <ENTER> until the desired strobe setting shows on
the display.
NOTE: For no strobe effect, press <ENTER> until a color option shows on the display .
To set the orientation of the display, f ollow t he instructions bel ow:
1. Press <MENU> repeatedly until dISP shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select either:
• dISP for normal mode.
• dSIP for inverted mode.
4. Press <ENTER>.
To set the display to turn off after inactivity or not , do the f ollow ing:
1. Press <MENU> repeatedly until LEd shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select either:
• on to set the display to turn off after inactiv ity .
• oFF to set the display to stay on at all times.
4. Press <ENTER>.
To view the software version, do the following:
1. Press <MENU> repeatedly until uEr shows on the display.
2. Press <ENTER>.
Mini Kinta™ IRC User Manual Rev. 2 Page 11 of 17
IRC-6 Infrared
Remote
Control
The Mini Kinta™ IRC is compatible with the IRC-6 infrared remote control from Chauvet.
IRC mode will activate at the press of any button on the remote, as long as the product
IRC-6 Operation
Be sure the IRC-6 remote is pointing directly at the product and there is nothing in
<0> - Red/Green/Blue/White
<4> - Green
<5> - Green/Blue
<6> - Blue
<7> - Red/Blue
<8> - Green/White
<9> - Blue/White
The IRC-6 will not respond to any inputs when Black Out is activated. If the remote
<BLACK OUT>. You may
Linking IRC
units with the
Master/Slave
with the
is not in slave mode. After activating IRC mode, rEN will show on the display.
between the remote and the product.
The following buttons function w ith this product:
• <MANUAL> - Activates manual color mode
• <R> - Turns red on/off
• <G> - Turns green on/off
• <B> - Turns blue on/off
• <W> - Turns white on/off
• <SOUND> - Activates Sound mode
• <STROBE> - Activates strobe
• <AUTO> - Activates auto programs (<0> through <9>)
<1> - Red
<2> - Red/White
<3> - Red/Green
• <SPEED> - Activates speed control in Auto mode
NOTE: For strobe speed, do not press the speed button
• <+> - Increases auto program or strobe speed
• <-> - Decreases auto program or strobe speed
• <BLACK OUT> - Turns LEDs on/off
• All other buttons on the remote have no function with this product.
does not respond when a button is pressed, try pressing
have inadvertently activated Black Out.
It is possible to control the original Mini Kinta™ or several Mini Kinta™
Control With the
Mini Kinta™
IRC-6, by slaving them to a Mini Kinta™ IRC. Follow the instructions under
Mode for more information on Master/Slave mode.
Note: The master must be a Mini Kinta™ IRC to run any Mini Kinta™ products
IRC-6.
Page 12 of 17 Mini Kinta™ IRC User Manual Rev. 2
Master/Slave
(the master) to control the
(the slaves) without the
ce set and
Never connect a DMX controller to a DMX string configured for Master/Slave
The Master/Slave mode allows a single Mini Kinta™ IRC
Mode
actions of one or more Mini Kinta™ or Mini Kinta™ IRC products
need of a DMX controller. The master will be set to operate in either Auto/Sound mode or
a custom mix, while the slave units will be set to operate in Slave mode. On
connected, the slaves will operate in unison with the mast er .
Configure the units as indicated below.
Slaves:
1. Press <MENU> repeatedly until SLnd show s on the display .
2. Press <ENTER> and SL-1 w ill show on the display.
3. Connect the DMX input of the first slave unit to the D M X output of the master.
4. Connect the DMX input of the subsequent slaves to the DMX output of the previous
slave.
5. Finish setting and connecting all the slaves.
Master:
1. Set the master to operate in a custom mix or Auto/Sound mode through the menu or
with the IRC-6.
2. Make the master the first unit in the daisy chain.
• Configure all the slaves before connecting the master to the daisy chain.
•
operation because the controller may interfere with the signals from the master .
• Do not connect more than 10 slaves to the master.
Mini Kinta™ IRC User Manual Rev. 2 Page 13 of 17
Product
up reduces light output performance and can cause overheating. This can lead
mechanical wear. To maintain optimum
s at least twice a month.
er, be aware that usage and environmental conditions could be contributing factors
because you could damage
5. MAINTENANCE
Dust build-
Maintenance
to reduction of the light source’s life and/or
performance and minimize wear, clean your lighting product
Howev
to increase the cleaning frequency.
To clean the product, follow the instructions below:
1. Unplug the product from pow er .
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust
collected on the external surface/vents.
4. Clean all transparent surfaces with a mild soap solution, ammonia-free glass
cleaner, or isopropyl alcohol.
5. Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning
tissue.
6. Softly drag any dirt or grime to the outside of the tra nsp arent surface.
7. Gently polish the transparent surfaces until they are free of haze and lint.
Always dry the transparent surfaces carefully af ter cleaning them.
Do not spin the cooling fans using compressed air
them.
Page 14 of 17 Mini Kinta™ IRC User Manual Rev. 2
Dimensions and
Length
Width
Height
Weight
7.5 in (191 mm)
9.1 in (241 mm)
7.25 in (184 mm)
3.4 lb (1.6 kg)
Note: Dimensions in inches rounded to the nearest decimal digit.
Power
Power Supply Type
Range
Voltage Selection
Switching (internal)
100 to 240 VAC, 50/60 Hz
Auto-ranging
Parameter
120 V, 60 Hz
230 V, 50 Hz
Consumption
19 W
18 W
Operating Current
0.3 A
0.2 A
Power linking current (units)
8 A (29 units)
8 A (53 units)
Fuse
T 1 A, 250 V
T 1 A, 250 V
Power I/O
U.S./Worldwide
UK/Europe
Power input connector
IEC
IEC
Power output connector
Edison
IEC
Power Cord plug
Edison (U.S.)
Local plug
Light Source
Type
Power
Lifespan
LED
3 W
50,000 hours
Color
Quantity
Current
Red
1
0.24 A
Green
1
0.24 A
Blue
1
0.25 A
White
1
0.25 A
Photometrics
Parameter
Coverage angle
114°
Thermal
Maximum External Temp.
Cooling System
104 °F (40 °C)
Fan-assisted Convection
DMX
I/O Connectors
Channel Range
3-pin XLR 4
Ordering
Product Name
Item Code
UPC Number
Mini Kinta™ IRC
10050950
781462212988
6. TECHNICAL SPECIFICATIONS
Weight
Mini Kinta™ IRC User Manual Rev. 2 Page 15 of 17
Returns
distributor and
follow their instructions on how to return Chauvet products to them. Visit our
Call the corresponding Chauvet Technical Support office and request a Return
shipping the product. Be prepared to
provide the model number, serial number, and a brief description of the cause for the
You must send the merchandise prepaid, in its original box, and with its original packing
Clearly label the package with the RMA number. Chauvet will refuse any product returned
Write the RMA number on a properly affixed label. DO NOT write the RMA number
product, clearly write the following information on a piece of paper and
from inadequate
Chauvet reserves the right to use its own discretion to repair or replace returned
To return a product or request support:
• In the U.S., contact Chauvet World Headquarters (See Contact Us).
• In the UK or Ireland, contact Chauvet Europe Ltd. (S ee Contact Us).
• In Mexico, contact Chauvet Mexico. (See Contact Us).
• In Benelux, contact Chauvet Europe BVBA. (See Contact Us).
• In any other country, DO NOT contact Chauvet. Instead, contact your lighting
distributor. See www.chauvetlighting.com for distributors outside the U.S., UK,
Ireland, Mexico, or Benelux.
Outside the U.S., UK, Ireland, Mexico, or Benelux, contact your
website for contact details.
Merchandise Authorization (RMA) number before
return.
and accessories. Chauvet will not issue call tags.
without an RMA number.
directly on the box.
Before sending the
place it inside the box:
• Your name
• Your address
• Your phone number
• RMA number
• A brief description of the problem
Be sure to pack the product properly. Any shipping damage resulting
packaging will be your responsibility. F edEx packing or double-boxing are recommended.
product(s).
Page 16 of 17 Mini Kinta™ IRC User Manual Rev. 2
C
WORLD HEADQUA R TERS - Chauvet
General Information
Techni ca l S u pp o r t
www.chauvetlighting.com
UNITED KIN GDOM AND IRE LAND - Chauvet Europe Ltd.
General Information
Fax: +44 (0)1773 5111 10
Techni ca l S u pp o r t
MEXICO - Chauvet Mexico
General Information
Voice: +52 (728) 285-5000
Technical Support
www.chauvet.com.mx
CHAUVET EUROPE - Chauvet Europe BVBA
General Information
Voice: +32 9 388 93 97
Techni ca l S u pp o r t
www.chauvetlighting.eu
Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux, contact your dealer. Follow their
instructions to request support or to return a product. Visit our website for contact details.
ONTACT
US
Address:5200 NW 108th Avenue
Sunrise, FL 33351
Voice: (954) 577-4455
Fax: (954) 929-5560
Toll free: (800) 762-1084
Address:Unit 1C
Brookhill Road I ndu s trial
Estate
Pinxton, Nottingham, UK
NG16 6NT
Voice: +44 (0)1773 511115
Address:Av. Santa Ana 30
Parque Indust rial Le rma
Lerma, Mexico C.P. 52000
Voice: (954) 577-4455 (Press 4)
Fax: (954) 756-8015
Email: tech@chauvetlighting.com
World Wide Web
Email:
uktech@chauvetlighting.com
World Wide Web
www.chauvetlighting.co.uk
Email: servicio@chauvet.com.mx
World Wide Web
Address:Stokstraat 18
9770 Kruishoute m
Belgium
Mini Kinta™ IRC User Manual Rev. 2 Page 17 of 17
Email: Eutech@chauvetlighting.eu
World Wide Web
Loading...