Mirror Ball Party Kit
Snapshot
Replaceable Fuse
(Pinspot ONLY!)
Use on Dimmer
MBK-2
Outdoor Use
Sound Activated
DMX
Master/Slave
User Serviceable
Duty Cycle
User Manual
5200 NW 108th Avenue, Sunrise, FL 33351 U.S.A.
(800) 762-1084 – (954) 929-1115
FAX (954) 929-5560
www.chauvetlighting.com
What is Included
12’ mirror ball
2-RPM motor with power cord (includes s-ring)
Pinspot with lamp (YA-15)
Safety Instructions
Please read these instructions carefully, which include important information about the installation, usage and
maintenance of your fixture.
• Keep this User Manual for future consultation. If you sell the unit to another user, be sure that they also receive
this instruction booklet.
• Always make sure that you are connecting to the proper voltage and that the line voltage you are connecting to
is not higher than that stated on decal or rear panel of the fixture.
• This product is intended for indoor use only! To prevent risk of fire or shock, do not expose fixture to rain or
moisture.
• Make sure there are no flammable materials close to the unit while operating.
• In the event of serious operating problem, stop using the unit immediately. Never try to repair the unit by
yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the
nearest authorized technical assistance center.
• Do not connect the device to a dimmer pack.
• Make sure power cord is never crimped or damaged.
• Never disconnect power cord by pulling or tugging on the cord.
• Do not operate this device in more than 113° F (45° C) ambient temperature conditions.
There are no-user serviceable parts inside the unit. Do not open the housing or attempt any
repairs yourself. In the unlikely event your unit may require service, contact CHAUVET®
Technical Support.
Product Overview
1. Plug the motor into power.
2. Then, using the included s-ring, hang the 12” mirror ball from the motor.
3. Plug the included pinspot into power and aim it at the mirror ball. Mount the pinspot approximately
8~15 ft away from the mirror ball to achieve optimal performance.
Use
ONLY the included s-ring to hang the mirror ball from the motor. A replacement s-ring may
be purchased by contacting Chauvet®.
Set the voltage selection switch on the back of the pinspot to the correct setting before
plugging into power.
The motor speed ranges between 2~3 RPM, depending on the voltage being supplied at the
outlet.
MBK-2 User Manual 2 Rev. 2
The fuse is located inside this
FUSE
Fuse Replacement
Voltage Selection
Fuseholder
Power input
Pinspot Back panel
Motor (MOT-2)
S-ring
Mirror Ball Installation
12”Mirror ball
Disconnect the power cord before replacing a
fuse and always replace with the same type fuse.
With a Phillips-head screwdriver, unscrew the fuse holder from its housing. Remove the damaged fuse
from its holder and replace with exact same type fuse. Screw the fuse holder back in its place and
reconnect power.
compartment. Remove using a
flat-head screwdriver.
Switch
MBK-2 User Manual 3 Rev. 2
Return Procedure
Returned merchandise must be sent prepaid and in the original packing; call tags will not be issued. Package
must be clearly labeled with a Return Merchandize Authorization Number (RMA #). Products returned without
the RMA # will be refused. Call CHAUVET® and request an RMA # prior to shipping the fixture. Be prepared to
provide the model number, serial number and a brief description of the cause for the return. Be sure to pack
fixture properly; any shipping damage resulting from inadequate packaging is the customer’s responsibility.
FedEx packing or double-boxing are recommended.
CHAUVET® reserves the right to use its own discretion to repair or replace product(s).
If you are given an RMA #, please include the following information on a piece of paper inside
the box:
1) Your name
2) Your address
3) Your phone number
4) The RMA #
5) A brief description of the symptoms
Claims
Damage incurred in shipping is the responsibility of the shipper; therefore, the damage must be reported to the
carrier upon receipt of merchandise. It is the customer's responsibility to notify and submit claims with the
shipper in the event that a fixture is damaged due to shipping. Any other claim for items such as missing
component/part, damage not related to shipping, and concealed damage, must be made within 7 days of
receiving merchandise.
MBK-2 User Manual 4 Rev. 2
Technical Specifications
WEIGHT
12” Mirror Ball .................................................................................... 2.5 lbs (1.2 kg)
Pinspot (YA-15) ................................................................................. 2.4 lbs (1.1 kg)
Motor (MOT-2) .................................................................................. 0.7 lbs (0.3 kg)
Total .................................................................................................. 5.6 lbs (2.5 kg)
POWER
Operating range (motor) ........................................ 115 VAC, 60 Hz or 230 V, 50 Hz
Operating range (pinspot) ................................................... 115/230 VAC, 50/60 Hz
Fuse (pinspot) ....................................................................................... F 1 A, 250 V
MOTOR
Rotation speed ................................................................................ 2-RPM (MOT-2)
LIGHT SOURCE
Lamp (6 V, 30 W) (included) ....................................................................... CH-4515
THERMAL
Maximum ambient temperature ......................................................... 113° F (45° C)
ORDERING INFORMATION
Mirror Ball Party Kit ........................................................................................ MBK-2
WARRANTY INFORMATION
Warranty ................................................................................ 1-year limited warranty
Contact Us
World Wide
©CHAUVET, 2012, All Rights Reserved.
Information and specifications in this user manual are subject to change without notice.
CHAUVET® assumes no responsibility or liability for any errors or inaccuracies that may appear in this document.
General Information CHAUVET®
5200 NW 108th Avenue
Sunrise, FL 33351
voice: 954.929.1115
fax: 954.929.5560
toll free: 800.762.1084
Technical Support CHAUVET®
5200 NW 108th Avenue
Sunrise, FL 33351
voice: 954.929.1115 (Press 4)
fax: 954.929.5560 (Attention: Serv ice)
World Wide Web www.chauvetlighting.com
MBK-2 User Manual 5 Rev. 2
Loading...