Carefully unpack the product immediately and check the container to make sure all the parts are in the
package and are in good condition.
Claims
If the box or the contents (the product and included accessories) appear damaged from shipping, or show
signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier
immediately may invalidate your claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed
damage, file a claim with Chauvet within 7 days of delivery.
Text Conventions
CONVENTIONMEANING
1–512A range of values
50/60A set of values of which only one can be chosen
SettingsA menu option not to be modified
<ENTER>A key to be pressed on the product’s control panel
ONA value to be entered or selected
•Power Cord
•Warranty Card
•Quick Reference Guide
Symbols
SYMBOLMEANING
Electrical warning. Not following these instructions may cause electrical damage to
the product, accessories, or the user.
Critical installation, configuration, or operation information. Not following these
instructions may make the product not work, cause damage to the product, or cause
harm to the operator.
Important installation or configuration information. The product may not function
correctly if this information is not used.
Useful information.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects. However,
Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,
damage or disruption caused by any errors or omissions in this document, whether such errors or
omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the
content of this document without any obligation to notify any person or company of such revision, however,
Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest
version from www.chauvetdj.com
.
Intellectual Property
The works of authorship contained in this manual, including, but not limited to, all design, text and images
are owned by Chauvet.
Electronically published by Chauvet in the United States of America.
CHAUVET, the Chauvet logo, and Festoon/Festoon VW are registered trademarks or trademarks of
Chauvet & Sons LLC. (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries.
Other company and product names and logos referred to herein may be trademarks of their respective
companies.
Festoon/Festoon VW User Manual Rev. 2
Page 1 of 23
Safety Notes
•Always connect the product to a grounded circuit to avoid the risk of electrocution.
•Always disconnect the product from the power source before cleaning or replacing the
fuse.
•Avoid direct eye exposure to the light source while the product is on.
•Make sure the power cord is not crimped or damaged.
•Never disconnect the product from power cord by pulling or tugging on the cord.
•If mounting the product overhead, always secure to a fastening device using a safety
cable.
•Make sure there are no flammable materials close to the product when operating.
•The bulbs can get hot with excessive use. Avoid touching them with bare hands, and
always allow the bulb to cool before handling.
•This product is not intended for permanent installation.
•Always make sure that the voltage of the outlet to which you are connecting the product
is within the range stated on the decal or rear panel of the product.
•The Festoon/Festoon VW String is for indoor or temporary outdoor use (IP43). Do not
expose to harsh or excessively corrosive environmental conditions (whether indoors or
outdoors), including, but not limited to, extreme temperatures, humidity, atmospheric
conditions (including salinity or pressure), radiation (UV, infrared or nuclear), shock and
conditions which exceed the product’s Ingress Protection (IP) rating.
•ALWAYS terminate the open end of your string when being used outdoors or near
moisture.
•The Festoon/Festoon VW Strings may be exposed to rain and moisture, as long as the
bulbs hang at a 90° angle to the ground. The Festoon/Festoon VW controller is not
intended for outdoor use.
•The Festoon/ Festoon VW Controller is IP20 rated. Keep it away from water, solvents and
chemicals. Take care to site it away from potential water hazards, for example, do not
install it beneath pipes that are subject to condensation. Avoid installing it where
excessive humidity and condensation may occur
•Always install the product in a location with adequate ventilation, at least 20 in (50 cm)
from adjacent surfaces.
•Be sure that no ventilation slots on the product’s housing are blocked.
•Never connect the product to a dimmer.
•Make sure to replace the fuse with another of the same type and rating.
•Never carry the product from the power cord or any moving part. Always use the hanging/
mounting bracket.
•The maximum ambient temperature (Ta) is 104 °F (40 °C). Do not operate the product at
higher temperatures.
•In the event of a serious operating problem, stop using the product immediately.
•Never try to repair the product. Repairs carried out by unskilled people can lead to
damage or malfunction. Please contact the nearest authorized technical assistance
center.
•To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by
BEFORE YOU BEGIN
unplugging it.
Page 2 of 23
Keep this User Manual for future use. If you sell the product, be sure that they receive this
document.
Festoon/Festoon VW User Manual Rev. 2
INTRODUCTION
Festoon/Festoon VW Controller
D-Fi USB Port
DMX Out
Power In/Out
Festoon String Port
Display and Menu Buttons
IR Receiver
DMX In
Extension String
Festoon/Festoon VW String
Festoon/FestoonVW Bulb (in detail)
Mounting Eyelet
IP43 Rated Socket,
Cabling and Plug
2. INTRODUCTION
Product Overview
Festoon/Festoon VW User Manual Rev. 2
Page 3 of 23
Product Dimensions: String and Bulb
590.5 in
15000 mm
561 in
14249 mm
5 in
127 mm
29.5 in
749 mm
INTRODUCTION
Page 4 of 23
Festoon/Festoon VW User Manual Rev. 2
INTRODUCTION
7.5 in
191 mm
8.4 in
213 mm
2 in
51 mm
6.7 in
17 cm
Product Dimensions: Controller
Festoon/Festoon VW User Manual Rev. 2
Page 5 of 23
SETUP
Fuse Holder
Power In
Power Out to Next Product
Safety cap
Spare fuse holder
(inside safety cap)
Installed fuse
(held by plastic clip)
3. SETUP
AC Power
The Festoon/Festoon VW controller has an auto-ranging power supply and it can work with an input
voltage range of 100 to 240 VAC, 50/60 Hz. To determine the product’s power requirements (circuit
breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back
panel, or refer to the product’s specifications chart. The listed current rating indicates the product’s
average current draw under normal conditions.
•Always connect the product to a protected circuit (circuit breaker or fuse).
Make sure the product has an appropriate electrical ground to avoid the risk of
electrocution or fire.
•To eliminate unnecessary wear and improve its lifespan, during periods of nonuse completely disconnect the product from power via breaker or by
unplugging it.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if
the rheostat or dimmer channel serves only as a 0 to 100% switch.
Fuse Replacement
1.Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
2.Pry the fuse holder out of the housing.
3.Remove the blown fuse from the holder and replace with a fuse of the exact same type and rating.
4.Insert the fuse holder back in place and reconnect power
.
Disconnect the product from the power outlet before replacing the fuse.
Page 6 of 23
Festoon/Festoon VW User Manual Rev. 2
Loading...
+ 17 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.