How it Works
Chauvet DJ
Loading...
Cosmos HP
User Manual [EN]
17 pgs2.33 Mb0

Chauvet DJ Cosmos HP User Manual [EN]

Download
Page 1
User Manual
Page 2
Table of Contents
TABLE OF CONTENTS
1. Before You Begin ......................................................................................... 1
Claims ............................................................................................................................ 1
2. Introduction................................................................................................... 3
3. Setup.............................................................................................................. 5
Fuse Replacement ......................................................................................................... 5
Power Linking................................................................................................................. 5
Orientation...................................................................................................................... 6
Rigging ........................................................................................................................... 6
4. Operation....................................................................................................... 7
Configuration (DMX) ...................................................................................................... 7
DMX Personality and Starting Address.......................................................................... 7
Configuration (Standalone) ...................................................................................... 10
Automatic Program ........................................................................................................ 10
Auto Program Speed...................................................................................................... 10
Motor Rotation Speed .................................................................................................... 10
Static Color Mode........................................................................................................... 10
Sound-Active Programs ................................................................................................. 10
Sound Sensitivity............................................................................................................ 10
IRC-6 Infrared Remote Control ................................................................................ 11
Master/Slave Mode .................................................................................................. 12
5. Maintenance.................................................................................................. 13
Product Maintenance ............................................................................................... 13
6. Technical Specifications.............................................................................. 14
Contact Us......................................................................................................... 15
Warranty & Returns.................................................................................................. 15
Cosmos HP User Manual Rev. 4
Page 3
Before You Begin

1. Before You Begin

What Is Included

•CosmosHP
• Power cable

Unpacking Instructions

Carefully unpack the product immediately and check the container to make sure all the parts are in the package and are in good condition.

Claims

If the box or the contents (the product and included accessories) appear damaged from shipping, or show signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier immediately may invalidate a claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed damage, file a claim with Chauvet within 7 days of delivery.

Text Conventions

Convention Meaning
1–512 A range of values
50/60 A set of values of which only one can be chosen
Settings A menu option not to be modified
<ENTER> A key to be pressed on the product’s control panel
ON A value to be entered or selected
• Hanging bracket
• Quick Reference Guide

Symbols

Symbol Meaning
Critical installation, configuration, or operation information. Not following these instructions may make the product not work, cause damage to the product, or cause harm to the operator.
Important installation or configuration information. The product may not function correctly if this information is not used.
Useful information.
Cosmos HP User Manual Rev. 4
1
Page 4
Before You Begin

Safety Notes

■ ALWAYS:
♦ Connect to a grounded circuit. ♦ Connect to operating voltages as specified on the product's spec sticker. ♦ Disconnect from power before replacing the fuse. ♦ Disconnect from its power source during periods of inactivity. ♦ Use a safety cable when suspending overhead. ♦ Heed all restrictions and warnings on the spec sticker. ♦ Mount in a location with at least 20 in (50 cm) of ventilation. ♦ Replace the fuse with the same type and rating. ♦ Use a clamp with a captive bolt when a single hanging bracket is used.
■ In the event of a serious operating problem, stop using immediately.
■ DO NOT:
♦ Open this product or attempt any repairs. It contains no user-serviceable parts. ♦ Look at the light source when the product is on. ♦ Use if the power cord is crimped or damaged. ♦ Disconnect by pulling on the power cord. ♦ Allow flammable materials close to the product when it is operating. ♦ Touch the housing when it is on. ♦ Block any ventilation holes/slots in the housing. ♦ Connect to a dimmer or rheostat. ♦ Carry the product by its power cord. ♦ Operate in temperatures higher than 104°F (40°C). ♦ Expose to environments that exceed the Ingress Protection (IP) rating. ♦ Expose to rain or moisture. ♦ Use outdoors. ♦ Expose to corrosive environmental conditions such as temperature, humidity, salinity,
pressure, radiation, or shock.
♦ Set this product on a flammable surface.

Disclaimer

Chauvet believes that the information contained in this manual is accurate in all respects. However, Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss, damage or disruption caused by any errors or omissions in this document, whether such errors or omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the content of this document without any obligation to notify any person or company of such revision, however, Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest version from www.chauvetdj.com
The works of authorship contained in this manual, including, but not limited to, all design, text and images are owned by Chauvet.
© Copyright 2023 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America. CHAUVET, the Chauvet logo, and Cosmos HP are registered trademarks or trademarks of Chauvet & Sons LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company and product names and logos referred to herein may be trademarks of their respective companies.
.
Keep this User Manual for future use. If the product is sold to someone else, be sure that they also receive this document.
2
Cosmos HP User Manual Rev. 4
Page 5
Introduction
Display
Power
out
DMX in/
out
Microphone
LED
Indicators
Menu
buttons
Carry
handle
Power
in
Fuse holder
IR sensor

2. Introduction

Product Overview

Cosmos HP User Manual Rev. 4
3
Page 6

Product Dimensions

11.6 in
295 mm
18.9 in
480 mm
3.5 in
90 mm
Introduction
4
Cosmos HP User Manual Rev. 4
Page 7
Setup
Power
source
1
st
product
2
nd
product
3
rd
product
Additional
products

3. Setup

AC Power

The Cosmos HP has an auto-ranging power supply, and it can work with an input voltage range of 100 to 240 VAC, 50/60 Hz.
To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart. The listed current rating indicates the product’s average current draw under normal conditions.
• Always connect the product to a protected circuit (a circuit breaker or fuse). Make sure the product has an appropriate electrical ground to avoid the risk of electrocution or fire.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel serves only as a 0 to 100% switch.

Fuse Replacement

1. Disconnect the product from power.
2. Using a Phillips-head screwdriver, unscrew the fuse holder and pull it straight out.
3. Remove the blown fuse from the holder and replace with a fuse of the exact same type and rating.
4. Re-insert the fuse holder and reconnect power.

Power Linking

The product provides power linking via the outlet located in the back of the product. See the diagram below for further explanation.
Power Linking Diagram
It is possible to link up to 50 Cosmos HP products on 120 VAC or up to 95 products on 230 VAC.
The power linking diagram shown above corresponds to the North American version of the product ONLY! If using the product in other markets, consult with the local Chauvet distributor as power-linking connectors and requirements may differ by country or region.
Cosmos HP User Manual Rev. 4
5
Page 8
Setup
Safety cable
(such as CH-05
from Chauvet)
Mounting clamp
(such as CLP-15N from Chauvet)

Mounting

bracket
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.

Orientation

The Cosmos HP may be mounted in any position; however, make sure adequate ventilation is provided around the product.

Rigging

• Before deciding on a location, always make sure there is easy access to the product for maintenance and programming.
• Make sure adequate ventilation is provided around the product.
• Mount the product on a structure or surface that can support the product’s weight (see the Technical
Specifications).
• Always use a safety cable when mounting the product overhead. Mount the product securely to a rigging point, such as an elevated platform or a truss.
• Use a mounting clamp of appropriate weight capacity when rigging the product onto a truss
• When power linking multiple products, mount the products close enough for power-linking cables to reach.
Mounting Diagram
6
Cosmos HP User Manual Rev. 4
Page 9
Operation

4. Operation

Control Panel Operation

To access the control panel functions, use the four buttons located underneath the display. Refer to the
Product Overview to see the button locations on the control panel.
Button Function
<MENU> Exits from the current menu or function
<UP> Navigates upwards through the menu list or increases a selected numeric value
<DOWN> Navigates downwards through the menu list or decreases a selected numeric value
<ENTER> Enables the currently displayed menu or sets a selected value into the selected function

Menu Map

Refer to the Cosmos HP product page on
Mode Programming Levels Description
DMX Mode
Programs P-- P 1–6 Automatic programs
Auto Speed S-- S001–100 Program speed for P 1–6
Motor Mot M000–100 Standalone motor speed
Static Colors
Sound Mode Snd
Sensitivity SEnS u001–100 Sets sound sensitivity
Infrared
Mode
6Ch
23Ch 23-channel DMX mode
C-- C001–015 Static colors
SEt

Configuration (DMX)

Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Connect a DMX cable from the DMX output of the DMX controller to the DMX input socket on the product.

DMX Personality and Starting Address

When selecting a starting DMX address, always consider the number of DMX channels the selected DMX mode uses. If the starting address is set too high, access to some of the product’s channels could be restricted.
The Cosmos HP uses up to 23 DMX channels in a 23Ch DMX mode, which defines the highest recommended address to 490.
For information about the DMX protocol, download the DMX Primer from www.chauvetdj.com To select the starting address, do the following:
1. Press <MENU> repeatedly until 6Ch or 23Ch shows on the display.
2. Press <ENTER> and A001–512 will show on the display.
3. Use <UP> or <DOWN> to select the starting address.
4. Press <ENTER>.
www.chauvetdj.com
A001–512
bo Sound-active program, blackout without sound
SLoU
on
oFF
for the latest menu map.
6-channel DMX mode
Sound-active program, slow down without sound
Turns infrared on or off
.
Cosmos HP User Manual Rev. 4
7
Page 10

DMX Channel Assignments and Values

6Ch 23Ch Function Value Percent/Setting
000 005 No function
1 1 Auto programs
Program speed
22
– 3 Head 1, red 1 000 255 0–100% – 4 Head 1 green 1 000 255 0–100% – 5 Head 1 Blue 1 000 255 0–100% – 6 Head 1 White 1 000 005 0–100% – 7 Head 1 Red 2 000 255 0–100% – 8 Head 1 Green 2 000 255 0–100% – 9 Head 1 Blue 2 000 255 0–100% – 10 Head 1 White 2 000 255 0–100% – 11 Head 2 Red 1 000  255 0–100% – 12 Head 2 Green 1 000 255 0–100% – 13 Head 2 Blue 1 000 255 0–100% – 14 Head 2 White 1 000 255 0–100% – 15 Head 2 Red 2 000  255 0–100% – 16 Head 2 Green 2 000 255 0–100% – 17 Head 2 Blue 2 000 255 0–100% – 18 Head 2 White 2 000 255 0–100%
3–Color macros
419Strobe
5 20 Dimmer 000 255 0–100%
(when Ch1 is 006 250) Sound Sensitivity
(when Ch1 is 251 255)
006 250 Auto program 251 255 Sound-active program
001 255 Automatic program speed, slow to fast
001 255 Sound sensitivity, low to high
000
015 No function 016 031 Red 032 047 Green 048 063 Blue 064 079 White 080 095 Green and yellow 096 111 Red and blue 112 127 Red and white 128 143 Green and blue 144 159 Green and white 160 175 Blue and white 176 191 Red, green, and blue 192 207 Red, green, and white 208 223 Red, blue, and white 224 239 Green, blue, and white 240 255 Red, green, blue and white 000 005 No function 006 255 Strobe, slow to fast
Operation
8
Cosmos HP User Manual Rev. 4
Page 11
Operation
6Ch 23Ch Function Value Percent/Setting
000 005 No function 006 127 Rotation, fast to slow
6 – All motors rotation
– 21 Center motor rotation
– 22 Head 1 rotation
– 23 Head 2 rotation
128 135 No function 136 250 Reverse rotation, slow to fast 251 255 Sound mode 000 005 No function 006 127 Rotation, fast to slow 128 135 No function 136 250 Reverse rotation, slow to fast 251 255 Sound mode 000 005 No function 006 127 Rotation, fast to slow 128 135 Stop 136 250 Reverse rotation, slow to fast 251 255 Sound mode 000 005 No function 006 127 Rotation, fast to slow 128 135 No function 136 250 Reverse rotation, slow to fast 251 255 Sound mode
Cosmos HP User Manual Rev. 4
9
Page 12
Operation

Configuration (Standalone)

Set the product in the standalone mode to control without a DMX controller.
Never connect a product that is operating in any standalone mode to a DMX string connected to a DMX controller. Products in standalone mode may transmit DMX signals that could interfere with the DMX signals from the controller.

Automatic Program

To run a program on the Cosmos HP, follow the instructions below.
1. Press <MENU> repeatedly until P-- shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select an automatic program, from P 1–6.
4. Press <ENTER>.

Auto Program Speed

To adjust the auto program speed on the Cosmos HP, do the following:
1. Press <MENU> repeatedly until S-- shows on the display.
2. Use <UP> or <DOWN> to increase or decrease the program speed, from S. 001–100.
3. Press <ENTER>.

Motor Rotation Speed

To set the motor rotation speed for programs and static colors, follow the instructions below:
1. Press <MENU> repeatedly until Mot shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the rotation speed, from M000–100.
4. Press <ENTER>.

Static Color Mode

To run the Cosmos HP on a static color, follow the instructions below.
1. Press <MENU> repeatedly until C-- shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select a static color, from C001–015.
4. Press <ENTER>.

Sound-Active Programs

To run the Cosmos HP with a sound-active program, follow the instructions below.
1. Press <MENU> repeatedly until Snd shows on the display.
2. Press <ENTER>.
3. Press <ENTER> to select how the product will respond when no sound is detected, from bo (blackout), or SLoU (slow down).
4. Press <ENTER>.

Sound Sensitivity

To set the sound sensitivity on the Cosmos HP, do the following:
1. Press <MENU> repeatedly until SenS shows on the display.
2. Use <UP> or <DOWN> to increase or decrease the sound sensitivity, from U.0–100.
3. Press <ENTER>.
10
Cosmos HP User Manual Rev. 4
Page 13
Operation
BLACK
OUT
AUTO
SOUND
SENSI­TIVITY
SPEEDSTROBE
%
MANUAL
FADE
RGB
WUVA
+ 0
-
123
654
789

IRC-6 Infrared Remote Control

The Cosmos HP is compatible with the IRC-6 infrared remote control from Chauvet. To enable or disable IRC-6 functionality, do the following:
1. Press <MENU> repeatedly until SEt shows on the display.
2. Press <ENTER> to select from on (enable), or oFF (disable).
3. Press <MENU> repeatedly until P-- shows on the display.
4. Use <UP> or <DOWN> to select an automatic program, from P 1–6.
5. Press <ENTER>.
Consult the table below to operate the Cosmos HP with the IRC-6.
IRC-6 Button Function
<AUTO>
<SOUND>
<STROBE>
<SPEED>
<%> Press then use <+> or <-> to increase or decrease the dimmer
<+> Press to increase speed, sensitivity, or the dimmer
<-> Press to decrease speed, sensitivity, or the dimmer <0> Sets colors to white <1> Sets color to red <2> Sets color to red and green 1 <3> Sets color to red and green 2 <4> Sets color to green <5> Sets color to green and blue <6> Sets color to blue <7> Sets color to red and blue 1 <8> Sets color to red and blue 2 <9> Sets color to red and green 3
<BLACK OUT>
Press to activate automatic mode, then use <+> or <-> to change auto program
Press to activate sound-active mode, then use <+> or <-> to increase or decrease sensitivity
Press to activate strobe, then use <+> or <-> to increase or decrease strobe speed
Press to activate rotation speed, then use <+> or <-> to increase or decrease strobe speed
Press to turn off all the lights until the button is pressed again. NOTE: The IRC-6 will not respond to any inputs when Black Out is activated. If the product does not respond when a button is pressed, try pressing <BLACK OUT>. Black Out may have been activated.
Cosmos HP User Manual Rev. 4
11
Page 14
Operation

Master/Slave Mode

The Master/Slave mode allows a single Cosmos HP product (the “master”) to control the actions of one or more Cosmos HP products (the “slaves”) without the need of a DMX controller. The master product will be set to operate in either standalone mode or with the IRC-6, while the slave products will be set to operate in slave mode. Once set and connected, the slave products will operate in unison with the master product.
Configure the products as indicated below.
Slave products:
1. Press <MENU> repeatedly until 6Ch shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to set the starting address to A001.
4. Press <ENTER>.
5. Connect the DMX input of the first slave product to the DMX output of the master product.
6. Connect the DMX input of the subsequent slave products to the DMX output of the previous slave product.
7. Finish setting and connecting all the slave products.
Master product:
1. Set the master product to operate in standalone mode or with the IRC-6.
2. Make the master product the first product in the DMX daisy chain.
• Configure all the slave products before connecting the master to the daisy chain.
• Never connect a DMX controller to a DMX string configured for Master/Slave operation because the controller may interfere with the signals from the master.
• Do not connect more than 31 slaves to the master.
12
Cosmos HP User Manual Rev. 4
Page 15
Maintenance

5. Maintenance

Product Maintenance

Dust build-up can cause overheating and mechanical wear. To maintain optimum performance and minimize wear, clean all products at least twice a month. However, be aware that usage and environmental conditions could be contributing factors to increase the cleaning frequency.
To clean the product, follow the instructions below:
1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external surface/vents.
4. Clean all transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl alcohol.
5. Apply the solution directly to a soft, lint-free cotton cloth or a lens-cleaning tissue.
6. Softly drag any dirt or grime to the outside of the transparent surface.
7. Gently polish the transparent surfaces until they are free of haze and lint.
Always dry the transparent surfaces carefully after cleaning them.
Cosmos HP User Manual Rev. 4
13
Page 16
Technical Specifications

6. Technical Specifications

Dimensions and Weight
Length Width Height Weight
8 in (203 mm) 21.5 in (546 mm) 11.5 in (292 mm) 13.7 lb (6.21 kg)
Note: Dimensions in inches are rounded. Power
Power Supply Type Range Voltage Selection
Switching (internal) 100 to 240 VAC, 50/60 Hz Auto-ranging
Parameter 120 V, 60 Hz 230 V, 50 Hz
Consumption 149 W 141 W
Operating current 2.2 A 1.1 A
Power-linking current (products) 8 A (50 products) 8 A (95 products)
Fuse F3 A, 250 V F3 A, 250 V
Power I/O U.S./Worldwide UK/Europe
Power input connector
Power output connector
Power cord plug Neutrik Local plug
Light Source
Typ e Color Quantity Power Current Lifespan
LED Quad-color RGBW 16 4W 1 A 50,000 hours
Photometrics
Strobe Rate Coverage Angle
0 to 20 Hz 360°
Thermal
Maximum External Temperature Cooling System
104 °F (40 °C) Convection
DMX
I/O Connector Channel Range
3-pin XLR 6 or 23
Ordering
Product Name Item Code UPC Number
Cosmos HP 07052058 781462224066
powerCON
powerCON
®
compatible powerCON® compatible
®
compatible powerCON® compatible
14
Cosmos HP User Manual Rev. 4
Page 17

Contact Us

Contact Us
Chauvet World Headquarters
Chauvet U.K.
Chauvet Benelux
Chauvet France
Chauvet Germany
Chauvet Mexico
Address: Av. de las Partidas 34 - 3B
General Information Technical Support
Address: 3360 Davie Rd. Voice: (844) 393-7575
Davie, FL 33314 Fax: (954) 756-8015
Voice: (954) 577-4455 Email: chauvetcs@chauvetlighting.com
Fax: (954) 929-5560
Toll Free: (800) 762-1084 Website: www.chauvetdj.com
Address: Pod 1 EVO Park Email: UKtech@chauvetlighting.eu
Little Oak Drive, Sherwood Park
Nottinghamshire, NG15 0EB Website: www.chauvetdj.eu
UK
Voice: +44 (0 ) 1 7 7 3 5 1111 5
Fax : + 4 4 ( 0 ) 1 773 511110
Address: Stokstraat 18 Email: BNLtech@chauvetlighting.eu
9770 Kruishoutem
Belgium Website: www.chauvetdj.eu
Voice: +32 9 388 93 97
Address: 3, Rue Ampère
91380 Chilly-Mazarin
France Website: www.chauvetdj.eu
Voice: +33 1 78 85 33 59
Address: Bruno-Bürgel-Str. 11
28759 Bremen
Germany Website: www.chauvetdj.eu
Voice: +49 421 62 60 20
(Entrance by Calle 2)
Zona Industrial Lerma Website: www.chauvetdj.mx
Lerma, Edo. de México, CP 52000
Voice: +52 (728) 690-2010
Email: FRtech@chauvetlighting.fr
Email: DEtech@chauvetlighting.de
Email: servicio@chauvet.com.mx

Warranty & Returns

For warranty terms and conditions and return information, please visit our website.
For customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration For customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg,
France, and Germany: www.chauvetlighting.eu/warranty-registration
.
Cosmos HP User Manual Rev. 4
.
15
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use