C. Crane SEAK User Manual
WiFi Hotspot Repeater Quick Start Guide
WiFi Hotspot Repeater Setup Guide
*
A
Connect Power
3
AC Power
Adapter
Attach
Antenna
1
WiFi Hotspot
Repeater
USB Cable
Plug in a Compatable
2
USB Antenna
C
Open your Internet browser screen and enter “192.168.2.1”
into the address bar. Press “Enter” on your keyboard.
D
Enter “admin” for the username and “admin” again for the
password. Press “Log In”.
Please follow these instructions carefully.
*
NOTE:
Although the WiFi Hotspot Repeater can be setup
from a Tablet or Smartphone, it is much easier to
use a computer and the supplied Ethernet cable to
congure it.
Congure Wirelessly: Connect to the WiFi
B
Network named “ALFA_AP” from your WiFi
Network list.
-OR-
Congure with a computer and Ethernet
Cable: Connect the Ethernet cable between
your computer and the WiFi Hotspot Repeater.
Use the Ethernet port that is closest to your
power connection.
Compatible
Super USB WiFi
Antenna 3
USB Antennas
Versa WiFi USB
Adapter 3
E
Click on the “Easy Setup” tab in the gray bar.
F
Click the dot next to “USB Wireless Adapter”.
CC X Mile
Long Range
Outdoor USB WiFi
Antenna
1
Continued
2
WiFi Hotspot Repeater Quick Start Guide
I
WiFi Hotspot Repeater Quick Start Guide
G
Click on “Site Survey”.
H
Scroll towards the bottom of the page. 1. Click the dot
next to the WiFi Network that you want to repeat, then
2. Click “Select”.
J
Now you will choose an easy name to call your new WiFi
Network. (Example: “BobsNetwork”). Enter it into the
“SSID Choice” eld. Do not use the same name as the network
you are repeating.
K
1. Choose “WPA-PSK_WPA2-PSK” from the “Security Mode”
dropdown. 2. Choose “Auto (TKIP/AES)” 3. Now create a
wireless password and enter it into the “Pass Phrase” eld.
You must choose a password that contains between 8 and 64
characters. 4. Click on the “Done” button to nish the setup.
1
2
1. If your selected Network requires a password, then enter
it into the space marked “Pass Phrase” *. Do not change
any other settings. 2. Click on the “Next” button.
2
2
1
3
4
Congratulations, your new Network is ready to use !
Connect to it from the WiFi Network list on your device.
Look for the name that you entered in step
and enter the Password that you entered in step
TROUBLESHOOTING
If you cannot access the Setup Screen then you may need to
perform a factory reset. To do this, press the red button on the
bottom for at least 5 seconds while it is powered ON. You may
need to use a toothpick or paperclip to reach it. Allow 30 seconds
for the hotspot to reset and startup before attempting setup again.
Reset Button
J
K
1
* If the security mode is WEP, then enter password into
“WEP Key 1”.
3
Bottom Panel
Copyright ©2015 C. Crane All Rights Reserved
4
Loading...