Casio TE-7000S, TE-8000F, TE-8500F User Manual

TE-7000S/8000F/8500F

Electronic Cash Register

————————————————————————

Programming Manual

Version 1.0 February 2003

Key Assign

000.NOP 001.CASH 002.CHARGE

003.CHECK 004.CREDIT 006.NB

008.PRCINQ 009.STKINQ 010.CHAR

011.PRT 012.CHKP 013.CLK TRAN

014.TBL TRAN 015.TIP 016.NRMRCT

019.LOAN 020.RC 021.PD

REG C01 10-10-01 12:34 001234 1 Spagetti $20.00 T1¨ 1 Spagetti $20.00 T1

7.5%

Date 01-10-10 Time 12:34 00

%- -1.50

ID Character MC #01

1 Coffee $8.00

Check System Master KP System Master R/J/Order Printer SA-3015 Slip Printer SA-3015 Rear Display No Remote Display No OK? YES

No. Descriptor Qty Price

1 Hamburger $2.00 T1

1 PLU0001 @1,234.00 PLU0001 12.26 @1.00

15%

2 PLU0002 @20.00 PLU0002 0.00 @2.00

%- -0.30

3 PLU0003 @30.00 PLU0003 0.50 @3.00

1 Milk $2.00

4 PLU0004 @40.00 PLU0004 1.75 @4.00

2 Apple Juice $5.00

5 PLU0005 @50.00 PLU0005 2.80 @5.00

1 Coffee $8.00 ´

6 PLU0006 @60.00v

Coffee $8.00

§∞∏©ºß 12 ST $76.50

Record No. 1

X YES

X/For YES X/XX YES X/XXX YES Ketten Bon YES Selective Item ST YES New Check YES Old Check YES New/Old Check YES Add Check YES Separate Check YES

Table Range

0.00

Enter Start range 1 End range 123

OK? YES

022.P.UP. 023.COUPON 025.DEPOSIT

027.- 028.%- 029.+

030.%+ 033.RF 034.VOID

036.CPN2 037.VLD 038.RCT

039.CK.E 040.# 041.#/NS v

0.00

Preface

Document warranty

The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty of any kind with regard to this material, including, but not limited to the implied warranties of marketability and fitness for a particular purpose. CASIO Computer Co., Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this manual.

Printing history

Manual version Software version

Version 1.0: February, 2003 First Edition: February, 2003 Version 1.0

Revised points

Preconditions for reading this manual

We suggest two preconditions for reading this manual.

1. A basic understanding of how the TE-7000S series devices must be configured/installed.

2. An understanding of the operational needs of restaurant, bar, and/or fast food outlets.

How to use this manual

This manual is designed to help make your programming chores simpler and easier. Programming procedures in this manual are represented using graphics that show you the keys you have to press or the data you need to input. Worksheets help you determine the programming codes you need to input to program the terminal. We recommend that you use the general procedure described below for programming.

General programming procedure

1. Determine the features and functions that you want to program to the terminal and use the worksheets to determine the programming codes. It might be a good idea to make copies of the worksheets you need before you fill them out.

2. Initialize the terminal.

3. Allocate memory in accordance with the features and functions you are about to program.

4. Perform the programming procedures you need, inputting the programming code from the worksheets.

P-2

Preface

TE-7000S/8000F/8500F Programming Manual

P-3

Contents

1. Machine Initialization................................................................ P-8

1-1. How to initialize the terminal ......................................................................P-8

1-2. How to initialize the terminal (add / replace one terminal) .......................P-11

1-3. How to flag clear the terminal (or INIT2) .................................................. P-11

2. Program 5 ................................................................................ P-14

2-1. Programming memory allocation (daily & program).................................P-14

2-2. Programming memory allocation (periodic & work) .................................P-15

2-3. Programming memory allocation file by file .............................................P-16

3. Program 4 ................................................................................ P-22

3-1. Programming key allocation.....................................................................P-22

3-2. Programming key allocation (key location change) .................................P-24

3-3. Programming key allocation.....................................................................P-27

4. Program 3 ................................................................................ P-32

4-1. Programming machine features...............................................................P-32

4-1-1 Programming pulldown group (adding / modifying / deleting group item) ..P-32

4-1-2 Programming set menu table .....................................................................P-34

4-1-3 Programming arrangement ........................................................................P-36

4-1-4 Programming batch X/Z report ...................................................................P-37

4-1-5 Programming the general feature...............................................................P-39

4-1-6 Programming scheduler .............................................................................P-56

4-1-7 Programming check print ...........................................................................P-58

4-1-8 Programming table analysis .......................................................................P-59

4-1-9 Programming tax table ...............................................................................P-60

4-1-10Programming void table .............................................................................P-63

4-1-11 Programming system connection ...............................................................P-64

4-1-12Programming I/O parameter.......................................................................P-65

4-1-13Programming printer connection ................................................................P-68

4-1-14Programming time zone .............................................................................P-69

4-1-15Programming time & attendance................................................................P-70

4-1-16Programming hourly item link.....................................................................P-74

4-1-17Programming IDC link ................................................................................P-75

4-1-18Programming Euro .....................................................................................P-76

4-1-19Programming auto program control............................................................P-77

4-1-20Programming LCD color control .................................................................P-78

4-1-21Programming Australian GST control.........................................................P-81

4-2. Programming clerks .................................................................................P-82

4-2-1 Programming clerk features .......................................................................P-82

4-2-2 Programming operation..............................................................................P-84

4-2-3 Programming commission rate...................................................................P-94

4-2-4 Programming table range...........................................................................P-95

4-2-5 Programming clerk control by range ..........................................................P-96

4-2-6 Programming clerk detail..........................................................................P-108

4-2-7 Programming clerk key ID ........................................................................P-109

P-4

Contents

4-3. Programming key features..................................................................... P-110

4-3-1 Programming PLU features......................................................................P-110

4-3-2 Programming PLU 2nd@ features ...........................................................P-112

4-3-3 Programming subdepartment features.....................................................P-113

4-3-4 Programming department features...........................................................P-114

4-3-5 Programming by range.............................................................................P-115

4-3-6 Programming individual program .............................................................P-118

4-3-7 Programming key function program .........................................................P-119

4-3-8 Programming shift PLU program..............................................................P-137

4-3-9 Programming scanning PLU link program................................................P-138

4-3-10Programming PLU by Pulldown group .....................................................P-140

5. Program 2 .............................................................................. P-144

5-1. Character programming .........................................................................P-144

5-1-1 Character programming keyboard............................................................P-144

5-1-2 Inputting characters by code ....................................................................P-146

5-1-3 After completing to input characters.........................................................P-146

5-2. Programming item descriptors ...............................................................P-147

5-2-1 Programming PLU item descriptors .........................................................P-147

5-2-2 Programming PLU 2nd unit price descriptors...........................................P-148

5-2-3 Programming subdepartment descriptors ................................................P-148

5-2-4 Programming department descriptors ......................................................P-149

5-2-5 Programming PLU/subdepartment/department descriptors by range ......P-150

5-2-6 Copying PLU descriptors to PLU 2nd unit price .......................................P-151

5-2-7 Programming function key descriptors .....................................................P-152

5-2-8 Programming PLU descriptors by Pulldown group...................................P-153

5-3. Programming characters and messages ...............................................P-154

5-3-1 Programming receipt message, slip message and guest receipt messageP-154

5-3-2 Programming text recall message............................................................P-155

5-3-3 Programming order character link ............................................................P-155

5-3-4 Programming fixed totalizer descriptors ...................................................P-156

5-3-5 Programming group character..................................................................P-157

5-3-6 Programming special characters..............................................................P-157

5-3-7 Programming report headers ...................................................................P-159

5-3-8 Programming endorsement message ......................................................P-160

5-3-9 Programming GT character......................................................................P-160

TE-7000S/8000F/8500F Programming Manual

P-5

Contents

6. Program 1 .............................................................................. P-162

6-1. Presetting date and time ........................................................................P-162

6-2. Programming unit price and rate............................................................P-163

6-2-1 Programming PLU unit price ....................................................................P-163

6-2-2 Programming PLU 2nd unit price .............................................................P-164

6-2-3 Programming PLU unit price and PLU 2nd unit price...............................P-165

6-2-4 Programming subdepartment unit price ...................................................P-166

6-2-5 Programming department unit price .........................................................P-166

6-2-6 Programming PLU / PLU 2nd@ / subdepartment

/ department unit price by range..............................................................P-167

6-2-7 Copying PLU unit price to PLU 2nd unit price..........................................P-169

6-2-8 Programming amount or rate to keys.......................................................P-170

6-2-9 Programming unit price of shift PLU.........................................................P-171

6-2-10Programming unit price of Pulldown group ..............................................P-172

7. Program 6 .............................................................................. P-174

7-1. Program read general procedure...........................................................P-174

7-2. Program read report sample ..................................................................P-175

7-2-1 Unit Price / Qty .........................................................................................P-175

7-2-2 Item Descriptor .........................................................................................P-176

7-2-3 Character and Message ...........................................................................P-176

7-2-4 Machine feature........................................................................................P-178

7-2-5 Clerk P-202

7-2-6 Key feature ...............................................................................................P-214

7-2-7 Keyboard ..................................................................................................P-219

7-2-8 Memory allocation ....................................................................................P-219

Index.............................................................................................. P-222

Program 3 mode Hierarchy .................................................................................P-225

Program 1 mode Hierarchy .................................................................................P-226

Program 2 mode Hierarchy .................................................................................P-226

Program 6 mode Hierarchy .................................................................................P-227

P-6

1. Machine Initialization.................................................................P-8

1-1. How to initialize the terminal ...................................................................... P-8

1-2. How to initialize the terminal (add / replace one terminal) ........................P-11

1-3. How to flag clear the terminal (or INIT2) ...................................................P-11

TE-7000S/8000F/8500F Programming Manual

P-7

Initialization

1. Machine Initialization

1-1. How to initialize the terminal

Preparation:

Operation:

Date 00-00-00 Time 12:34 00 ID Character MC #01

Date 01-10-10

Check cluster ID 0

Time 12:34 00

Check System Master

ID Character MC #01

R/J/Order Printer(1) UP-350

Check System Master

R/J/Order Printer(2) UP-350

Check cluster ID 0

Slip Printer SP-1300

R/J/Order Printer1 UP-350 R/J/Order Printer2 UP-350 Slip Printer SP-1300

OK? YES

1. All peripheral devices and terminals of this cluster should be turned off.

2. Connect all of the peripheral devices (such as printer, display etc.) to terminal.

3. Connect all terminals by inline.

4. Turn on all peripheral devices of a terminal.

5. Turn on this terminal with pressing the Journal feed key and release the key after the “Copyright” window is shown.

6. After releasing the key, enter “20000” (U.S.), “10000” (other area: English), “40000” (other area: German), “50000” (other area: French), “60000” (other area: Spanish) and press the <ST> key.

OK? YES

Date 01-10-10 Time 12:34 00 ID Character MC #01 Check System Master Check cluster ID 0 R/J/Order Printer1 UP-350 R/J/Order Printer2 UP-350 Slip Printer SP-1300

OK? YES

Date 01-10-10 Time 12:34 00 ID Character MC #01 Check System Master Check cluster ID 0 R/J/Order Printer1 UP-350 R/J/Order Printer2 UP-350 Slip Printer SP-1300

7. Enter the current date (YY/MM/DD order) and time and press the <YES> key.

8. In ID character field, the auto-defined ID No. is shown. We recommend that you should not change the value.

P-8

OK? YES

9. In this field, you can select “1. Master / 2. Backup Master / 3. Satellite / 4.Selfmaster.” Please select one of these options and press the <YES> key.

Date 01-10-10 Time 12:34 00 ID Character MC #01 Check System Master Check cluster ID 0 R/J/Order Printer1 UP-350 R/J/Order Printer2 UP-350 Slip Printer SP-1300

OK? YES

Date 01-10-10 Time 12:34 00 ID Character MC #01 Check System Master Check cluster ID 0 R/J/Order Printer1 UP-350 R/J/Order Printer2 UP-350 Slip Printer SP-1300

OK? YES

Date 01-10-10 Time 12:34 00 ID Character MC #01 Check System Master Check cluster ID 0 R/J/Order Printer1 UP-350 R/J/Order Printer2 UP-350 Slip Printer SP-1300

OK? YES

10. In this field, by pressing <YES> the check cluster No, should be set, if your check tracking system are divided in some clusters. (Enter cluster No. “1” ~ “9”, if you use check cluster system.)

11. In these fields, by pressing <YES> you can select, “1. No / 2. UP-350 / 3. UP-250” for R/J/Order printer. Please select one of these options and press the <YES> key.

12. In this field, By pressing <YES> you can select, “1. No / 2. SP-1300” for slip printer. Please select one of these options and press the <YES> key.

Date 01-10-10 Time 12:34 00 ID Character MC #01 Check System Master Check cluster ID 0 R/J/Order Printer1 UP-350 R/J/Order Printer2 UP-350 Slip Printer SP-1300

OK? YES

INIT 10-10-01 12:34 000001

AUTO PGM

1.No Restore / Receive

2.PGM Restore (CF Card)

3.PGM Receive (Inline)

13. Please confirm all of the field and if they are all right, press the <YES> key to proceed the next step.

14. If you want to download program data from other terminal or CF card, select the appropriate menu and press the <YES> key and proceed the next step. If you don't need to download any program data, just select “1. No Restore / Receive” and press the <YES> key. If you have another machine to initialize, return to step 4.

TE-7000S/8000F/8500F Programming Manual

P-9

Initialization

Restore from CF card.

INIT 10-10-01 12:34 000001

Data Restore

1.PLUPGM1 .004

2.PLUPGM2 .004

3.STORE-AA.090

4.STORE-BB.090

STORE-AA.090

Are you sure to restore?

15. Insert the CF card into the slot and select the appropriate file and press the <YES> key.

16. After the confirmation window is shown, press the <YES> key to proceed restoring. After completion of downloading, return to step 4 to initialize other terminals.

Program receive from other terminal.

INIT 10-10-01 12:34 000001 Receive Data All PGM PGM Receive from MC #05

OK? YES

INIT 10-10-01 12:34 000001 Receive Data All PGM PGM Receive from MC #05

OK? YES

INIT 10-10-01 12:34 000000 Receive Data All PGM PGM Receive from MC #05

OK? YES

15. In this field, by pressing <YES> you can select the receiving contents as “1. All Data (including totalizer) / 2. All PGM (program only).”

16. In this field, by pressing <YES> you should enter the source ID number of the data and press the <YES> key.

P-10

17. Please confirm all of the fields and if they are all right, press the <YES> key to proceed downloading. After completion of downloading, return to step 4 to initialize other terminals.

1-2. How to initialize the terminal (add / replace one terminal)

Preparation:

1. All peripheral devices and terminals of this cluster should be turned off.

2. Connect all of the peripheral devices (such as printer, display etc.) to this terminal.

3. Connect the added / replaced terminal to inline.

Operation:

Follow the steps shown on the page 8 to 10.

1-3. How to flag clear the terminal (or INIT2)

Preparation:

1. All peripheral devices and this terminal should be turned off.

2. Check the connection of all peripheral devices (such as printer, display etc.) of this terminal.

3. Check the connection of this terminal to inline.

Operation:

4. Turn on all peripheral devices of this terminal.

5. Turn on this terminal with pressing the “Receipt feed” key and release the key after the “Copyright” window is shown.

6. After releasing the key, press the <ST> key.

INIT

1.Flag Clear

2.Init2

0.00

Note:

Performing “Init 2” requires password “8888888888” and <YES>.

7. Select “1. Flag Clear” and press the <YES> key. The flag clear operation is finished.

TE-7000S/8000F/8500F Programming Manual

P-11

Initialization

P-12

2. Program 5 .................................................................................P-14

2-1. Programming memory allocation (daily & program)................................. P-14

2-2. Programming memory allocation (periodic & work) ................................. P-15

2-3. Programming memory allocation file by file ............................................. P-16

TE-7000S/8000F/8500F Programming Manual

P-13

Program 5

2. Program 5

2-1. Programming memory allocation (daily & program)

Operation:

P5 C

01 10-10-01 12:34 000001

PGM-5

1.Memory Alloc

0.00

Memory Alloc

1. Sign on a clerk (if necessary).

2. Press <PGM MODE> repeatedly or “5” <PGM MODE> to assign Program 5 mode.

3. Press the <YES> key.

Memory Alloc

1.Daily & PGM

2.Periodic & Work

3.Individual File

0.00

Daily & PGM

Cashier/Clerk 15

Check Tracking Tables 60 Items/Table 60 Item Blocks 1 Table Analysis 10 PLU 324 PLU 2nd@ 324 Shift PLU 108´

RAM 22688

0.00

The remainder of memory

Daily & PGM

Hourly Production 0¨

Hourly Labor 0 Employee 0 Job Code 0 IDC Link 0 IDC(1) 0 IDC(2) 0 IDC(3) 0

RAM 22688

4. Select “1. Daily & PGM” and press the <YES> key.

Daily & PGM

Scanning PLU link 100¨

Pulldown Group 20 Set Menu Table 30 Sub-Department 0 Department 4 Group 20 Receipt/SLIP Msg 96 Text Recall 99´

RAM 22688

0.00

5. Select an appropriate file, enter the appropriate numbers you want to allocate and press the <YES> key. The lowest row shows the remaining memory.

6. Press the <ESC> key to return to the previous menu.

Daily & PGM

Order Char Link 10¨

Void Table 10 Free Function 100 Time Zone 0 Hourly Production 0 Hourly Labor 0 Employee 0 Job Code 0´

RAM 22688

0.00

P-14

0.00

2-2. Programming memory allocation (periodic & work)

Operation:

P5 C

01 10-10-01 12:34 000001

PGM-5

1.Memory Alloc

0.00

Memory Alloc

1.Daily & PGM

2.Periodic & Work

3.Individual File

0.00

1. Sign on a clerk (if necessary).

2. Press <PGM MODE> repeatedly or “5” <PGM MODE> to assign Program 5 mode.

3. Press the <YES> key.

4. Select “2. Periodic & Work” and press the <YES> key.

Periodic & Work

PLU

Periodic(1) Totalizer YES Periodic(2) Totalizer NO Consolidation & Work YES Except PLU Periodic(1) Totalizer YES Periodic(2) Totalizer NO Consolidation & Work YES

RAM 22688

0.00

Note:

The Flag Clear operation resets “YES” status. However it does not reallocate the files that were already allocated on this screen.

5. Select an appropriate row and press the <YES> (allocate) or <NO> (not allocate) key.

6. Press the <ESC> key to return to the previous menu.

TE-7000S/8000F/8500F Programming Manual

P-15

Program 5

2-3. Programming memory allocation file by file

If you want to allocate files file by file, follow the procedures below.

Operation:

P5 C

01 10-10-01 12:34 000001

PGM-5

1.Memory Alloc

0.00

Memory Alloc

1.Daily & PGM

2.Periodic & Work

3.Individual File

0.00

1. Sign on a clerk (if necessary).

2. Press <PGM MODE> repeatedly or “5” <PGM MODE> to assign Program 5 mode.

3. Press the <YES> key.

4. Select “3. Individual File” and press the <YES> key.

Individual File

FILE001 85

FILE101 85 FILE201 0 FILE301 85 FILE401 85 FILE501 0 FILE601 85 FILE002 85

RAM 612

0.00

5. Select the file number you want to change and enter record number you want to allocate (“0” means file deletion).

6. Press the <ESC> key to return to the previous menu.

P-16

File

No. length

System files

074 Key table 42 192 192 194 Program No 901 System connection table 18 33 33 40 Program No 902 I/O parameter 5 15 15 33 Program No 903 Printer connection 27 99 24 61 Program Yes 904 Consecutive number 3 5 5 33 Buffer No 905 Auto program control 3 20 20 40 Program Yes 906 LCD color control 8 10 0 33 Program Yes 999 System error log 11 999 40 68 Buffer Yes

Function and total files

001 Fixed totalizer 26 85 85 47 Pgm/Sales No 101 (periodic total 1) 10 85 85 40 Sales Yes 201 (periodic total 2) 10 85 0 40 Sales Yes 301 (daily consolidation) 10 85 85 40 for master Sales Yes 401 (periodic 1 consolidation) 10 85 85 40 for master Sales Yes 501 (periodic 2 consolidation) 10 85 0 40 for master Sales Yes 601 (consolidation work) 10 85 85 40 for master Buffer Yes 002 Transaction key 39 999 70 68 Pgm/Sales Yes 102 (periodic total 1) 10 999 70 40 Sales Yes 202 (periodic total 2) 10 999 0 40 Sales Yes 302 (daily consolidation) 10 999 70 40 for master Sales Yes 402 (periodic 1 consolidation) 10 999 70 40 for master Sales Yes 502 (periodic 2 consolidation) 10 999 0 40 for master Sales Yes 602 (consolidation work) 10 999 70 40 for master Buffer Yes 003 Subdepartment 57 99 0 110 Pgm/Sales Yes 103 (periodic total 1) 15 99 0 47 Sales Yes 203 (periodic total 2) 15 99 0 47 Sales Yes 303 (daily consolidation) 15 99 0 47 for master Sales Yes 403 (periodic 1 consolidation) 15 99 0 47 for master Sales Yes 503 (periodic 2 consolidation) 15 99 0 47 for master Sales Yes 603 (consolidation work) 15 99 0 47 for master Buffer Yes 004 PLU 95 9999 324 187 Pgm/Sales Yes 104 (periodic total 1) 30 9999 0 68 Sales Yes 204 (periodic total 2) 30 9999 0 68 Sales Yes 304 (daily consolidation) 30 9999 0 68 for master Sales Yes 404 (periodic 1 consolidation) 30 9999 0 68 for master Sales Yes 504 (periodic 2 consolidation) 30 9999 0 68 for master Sales Yes 604 (consolidation work) 30 9999 0 68 for master Buffer Yes 005 Department 57 99 4 110 Pgm/Sales Yes 105 (periodic total 1) 15 99 4 47 Sales Yes 205 (periodic total 2) 15 99 0 47 Sales Yes 305 (daily consolidation) 15 99 4 47 for master Sales Yes 405 (periodic 1 consolidation) 15 99 4 47 for master Sales Yes 505 (periodic 2 consolidation) 15 99 0 47 for master Sales Yes 605 (consolidation work) 15 99 4 47 for master Buffer Yes 006 Group 26 99 10 47 Pgm/Sales Yes 106 (periodic total 1) 10 99 10 40 Sales Yes 206 (periodic total 2) 10 99 0 40 Sales Yes 306 (daily consolidation) 10 99 10 40 for master Sales Yes 406 (periodic 1 consolidation) 10 99 10 40 for master Sales Yes 506 (periodic 2 consolidation) 10 99 0 40 for master Sales Yes 606 (consolidation work) 10 99 10 40 for master Buffer Yes 009 Hourly sales 20 96 24 54 Sales Yes 109 (periodic total 1) 20 96 0 54 Sales Yes 209 (periodic total 2) 20 96 0 54 Sales Yes 309 (daily consolidation) 20 96 24 54 for master Sales Yes 409 (periodic 1 consolidation) 20 96 0 54 for master Sales Yes 509 (periodic 2 consolidation) 20 96 0 54 for master Sales Yes 609 (consolidation work) 20 96 24 54 for master Buffer Yes

File description

Record Max. No. Default Work

of records

rec No. size tion able

Description

Attribu- Allocat-

TE-7000S/8000F/8500F Programming Manual

P-17

Program 5

File

No. length

010 Monthly sales 20 32 32 54 Sales Yes

110 (periodic total 1) 20 32 0 54 Sales Yes 210 (periodic total 2) 20 32 0 54 Sales Yes 310 (daily consolidation) 20 32 32 54 for master Sales Yes 410 (periodic 1 consolidation) 20 32 0 54 for master Sales Yes 510 (periodic 2 consolidation) 20 32 0 54 for master Sales Yes 610 (consolidation work) 20 32 32 54 for master Buffer Yes 012 Void reason 29 99 0 54 Pgm/Sale Yes

112 (periodic total 1) 10 99 0 40 Sales Yes 212 (periodic total 2) 10 99 0 40 Sales Yes 312 (daily consolidation) 10 99 0 40 for master Sales Yes 412 (periodic 1 consolidation) 10 99 0 40 for master Sales Yes 512 (periodic 2 consolidation) 10 99 0 40 for master Sales Yes 612 (consolidation work) 10 99 0 40 for master Buffer Yes 018 Table analysis 32 99 0 61 Pgm/Sale Yes

118 (periodic total 1) 10 99 0 40 Sales Yes 218 (periodic total 2) 10 99 0 40 Sales Yes 318 (daily consolidation) 10 99 0 40 for master Sales Yes 418 (periodic 1 consolidation) 10 99 0 40 for master Sales Yes 518 (periodic 2 consolidation) 10 99 0 40 for master Sales Yes 618 (consolidation work) 10 99 0 40 for master Buffer Yes 020 Grand total 24 3 3 40 Pgm/Sale No 120 (periodic total 1) 8 3 3 33 Sales Yes 220 (periodic total 2) 8 3 0 33 Sales Yes 320 (daily consolidation) 8 3 3 33 for master Sales Yes 420 (periodic 1 consolidation) 8 3 3 33 for master Sales Yes 520 (periodic 2 consolidation) 8 3 0 33 for master Sales Yes 620 (consolidation work) 8 3 3 33 for master Buffer Yes 055 Shift PLU 91 9999 0 173 Pgm/Sale Yes 155 (periodic total 1) 70 9999 0 124 Sales Yes 255 (periodic total 2) 70 9999 0 124 Sales Yes 355 (daily consolidation) 70 9999 0 124 for master Sales Yes 455 (periodic 1 consolidation) 70 9999 0 124 for master Sales Yes 555 (periodic 2 consolidation) 70 9999 0 124 for master Sales Yes 655 (consolidation work) 70 9999 0 124 for master Buffer Yes

Clerk

007 Clerk 95 99 6 145 Program Yes 030 Clerk detail link 4 99 10 40 Program Yes 027 Clerk (Dallas) key ID 14 200 6 40 Program Yes

011 Clerk detail 10 9801 60 40 Sales Yes

111 (periodic total 1) 10 9801 60 40 Sales Yes

211 (periodic total 2) 10 9801 0 40 Sales Yes

311 (daily consolidation) 10 9801 60 40 for master Sales Yes

411 (periodic 1 consolidation) 10 9801 60 40 for master Sales Yes

511 (periodic 2 consolidation) 10 9801 0 40 for master Sales Yes

611 (consolidation work) 10 9801 60 40 for master Buffer Yes

Time & Attendance

014 Hourly / Labor 26 96 0 68 Sales Yes

114 (periodic total 1) 26 96 0 68 Sales Yes 214 (periodic total 2) 26 96 0 68 Sales Yes 314 (daily consolidation) 26 96 0 68 for master Sales Yes 414 (periodic 1 consolidation) 26 96 0 68 for master Sales Yes 514 (periodic 2 consolidation) 26 96 0 68 for master Sales Yes 614 (consolidation work) 26 96 0 68 for master Buffer Yes 019 Work time 18 4158 0 82 Buffer Yes 319 (daily consolidation) 18 4158 0 82 for master Buffer Yes 800 Time zone 6 24 0 47 Program Yes 801 Employee 36 99 0 110 Program Yes 802 Job code 22 50 0 54 Program Yes

File description

P-18

Record Max. No. Default Work

of records

rec No. size tion able

Note:Never allocate “Shift PLU” files, if you use

Description

Attribu- Allocat-

“Accumulation for menu totaling specification”.

File

No. length

803 Schedule 11 2079 0 82 Program Yes 806 Time & Attendance work 99 1 1 33 Buffer Yes

Check

015 Check Index 300 200 60 40 Buffer Yes 060 Check detail 80 9999 3660 33 Buffer Y es 066 Check detail work 80 2000 122 33 Buffer Yes

Hourly item

021 Hourly item 10 1920 0 40 Sales Yes 121 (periodic total 1) 10 1920 0 40 Sales Yes 221 (periodic total 2) 10 1920 0 40 Sales Yes 321 (daily consolidation) 10 1920 0 40 for master Sales Yes 421 (periodic 1 consolidation) 10 1920 0 40 for master Sales Yes 521 (periodic 2 consolidation) 10 1920 0 40 for master Sales Yes 621 (consolidation work) 10 1920 0 40 for master Buffer Yes 031 Hourly item link 4 480 0 40 Program Yes

IDC

057 IDC (1) 50 9999 0 33 Sales Yes 357 (consolidation file) 50 9999 0 33 for master Sales Yes 657 (consolidation work) 50 9999 0 33 for master Buffer Yes 058 IDC (2) 50 9999 0 33 Sales Yes 358 (consolidation file) 50 9999 0 33 for master Sales Yes 658 (consolidation work) 50 9999 0 33 for master Buffer Yes 059 IDC (3) 50 9999 0 33 Sales Yes 359 (consolidation file) 50 9999 0 33 for master Sales Yes 659 (consolidation work) 50 9999 0 33 for master Buffer Yes 063 IDC buffer 50 9999 0 33 Buffer Yes 804 IDC link 6 999 0 54 Program Yes

Program / message / buffer

016 Scanning PLU link 9 300 0 40 Program Yes 022 General control 6 37 37 33 Program No 023 Special character 16 58 58 33 Program No 024 Report header 16 30 30 33 Program No 025 Tax table 74 10 5 117 Program Yes 026 Pulldown group 103 999 15 208 Program Yes 028 Set menu table 80 999 15 166 Program Yes 029 Batch X/Z 9 10 4 33 Program Yes 032 Receipt / slip message 40 96 96 33 Program Yes 033 Endorse message 40 4 4 33 Program Yes 035 Print buffer (external printer) 80 999 360 33 Buffer Yes 036 Registration buffer 80 2000 120 33 Buffer Yes 039 Character recall 40 9999 10 33 Program Yes 041 Check print 3 9 9 33 Program Yes 043 Print buffer (internal printer) 31 999 200 33 Buffer Yes 044 Display buffer 40 1000 100 33 Buffer Yes 047 Graphic logo (external printer) 13 432/864 0 33 Program Yes 048 Electronic journal memory 41 1000 120 33 Buffer Yes 648 Electronic journal (collection) 41 12336 0 33 for master Buffer Yes 054 PLU 2nd @ 47 9999 0 96 Program Yes 062 Scheduler 14 99 4 40 Program Yes 065 Order character 16 99 10 33 Program Yes 067 Graphic logo (internal printer) 54 168 0 33 Program Yes 068 Watermark 54 168 0 33 Program Yes 099 Euro program 4 3 0 33 Program Yes

Arrangement

038 Arrange group (1) 24 9999 50 33 Program Yes 138 Arrange group (2) 24 9999 0 33 Program Yes 238 Arrange group (3) 24 9999 0 33 Program Yes 338 Arrange group (4) 24 9999 0 33 Program Yes 438 Arrange group (5) 24 9999 0 33 Program Yes

File description

Record Max. No. Default Work

of records

rec No. size tion able

Description

Attribu- Allocat-

TE-7000S/8000F/8500F Programming Manual

P-19

Program 5

P-20

3. Program 4 ................................................................................. P-22

3-1. Programming key allocation..................................................................... P-22

3-2. Programming key allocation (key location change).................................. P-24

3-3. Programming key allocation..................................................................... P-27

TE-7000S/8000F/8500F Programming Manual

P-21

Program 4

3. Program 4

3-1. Programming key allocation

Operation:

P4 C

01 10-10-01 12:34 000001

PGM-4

1.Keyboard

0.00 ∞

Keyboard

1.Key Assign

2.Key Move

1. Sign on a clerk (if necessary).

2. Put the first level menu sheet on the keyboard.

3. Press <PGM MODE> repeatedly or “4” <PGM MODE> to assign Program 4 mode .

4. Press the <YES> key.

0.00

Key Assign

000.NOP 001.CASH 002.CHARGE

003.CHECK 004.CREDIT 006.NB

008.PRCINQ 009.STKINQ 010.CHAR

011.PRT 012.CHKP 013.CLK TRAN

014.TBL TRAN 015.TIP 016.NRMRCT

019.LOAN 020.RC 021.PD

022.P.UP. 023.COUPON 025.DEPOSIT

027.- 028.%- 029.+

030.%+ 033.RF 034.VOID

036.CPN2 037.VLD 038.RCT

039.CK.E 040.# 041.#/NS ´

0.00

5. Select “1. Key Assign” and press the <YES> key.

6. Select an appropriate function and press the <YES> key. Then press the corresponding key*. Or select an appropriate function by the function code list (see the next page), enter record No. (in 4-digits) and function code (in 3-digits) and press the corresponding key.

* In case of presetting flat-PLU, record No. or random PLU

code is necessary. In case of presetting department/subdepartment, record No. is necessary.

7. Press the <ESC> key to return to the previous menu.

P-22

Function Code Initial character

Add check 094 Arrangement 044 Bill copy 047 Break-in / out 109 Cancel 236 Cash amount tendered 001 Charge 002 Check endorsement 039 Check print 012 Check tender 003 Clerk number 072 Clerk transfer 013 Clock-in/out 108 Coupon 023 Coupon 2 036 Credit 004 Cube 090 Currency exchange 045 Customer number 043 Declaration 061 Department 051 Department number 135 Deposit 025 Discount 028 Display mode 219 Dutch account 140 Eat-in 128 Electronic journal display 207 Error correct / Void 034 First unit price 069 Flat PLU 063 House Bon 114 Ketten Bon 113 List 136 List number 137 Loan 019 Lock out unused key 000 Media change 118 Menu shift 064 Merchandise subtotal 080 Minus 027 Multiplication 082 New balance 006 New check 091 New / Old check 093 Normal receipt 016 No sale 042 Non-add 040 Non-add / No sale 041 OBR 103

ADD CHK ARG BILL BREAK-IN/OUT CANCEL CASH CHARGE CK.E CHKP CHECK CLK# CLK TRANS CLOCK-IN/OUT COUPON CPN2 CREDIT XXX CE CT DECLA DEPT nn DEPT# DEPOSIT %– DISP MODE DUTCH EAT-IN EJ DISP VOID 1st@ PLU nnnn HOUSE BON X/KETTEN LIST LIST# LOAN NOP MEDIA CHG MENU MDST – X NB NEW CHK NEW/OLD NRMRCT NS # #/NS OBR

Function Code Initial character

Old check 092 Open 067 Open2 068 Open Check 117 Operator number 078 Operator read / Reset 073 Paid out 021 Pick up 022 Plus 029 PLU 048 Post entry 115 Premium 030 Price inquiry 008 Price 049 Quantity / For 083 Recall 131 Receipt 038 Receipt On / Off 076 Received on account 020 Refund 033 Reverse display 206 Round repeat 116 Seat number 119 Second unit price 070 Selective item subtotal 085 Separate check 095 Shift PLU 065 Slip back feed / Release 054 Slip feed / Release 056 Slip print 055 Square 084 Stock inquiry 009 Store 130 Subdepartment 133 Subdepartment number 134 Substitution 111 Subtotal 075 T able number 058 Table transfer 014 Takeout 129 T ax status shift 057 T axable amount subtotal 077 T ax exempt 062 T ext print 011 T ext recall 010 Tray total 074 Tip 015 Validation 037 VAT 046 X/Z mode 122

OLD CHK OPEN OPEN2 OPEN CHK OPE# OPE X/Z PD P.UP + PLU# POST ENTRY %+ PRCINQ PRC QT RECALL RCT RCT ON/OFF RC RF REVERSE DSP ROUND REPEAT SEAT# 2nd@ SIST SEP CHK SFT PLU SB/R SF/R SLIP XX STKINQ STORE SUBDEPT nn SDPT# SUBST. SUBTOTAL TBL# TBL TRANS TAKE-OUT T/S TAST EXEMPT PRT CHAR TRAY TTL TIP VLD VAT X/Z MODE

TE-7000S/8000F/8500F Programming Manual

P-23

Program 4

3-2. Programming key allocation (key location change)

Operation:

P4 C

01 10-10-01 12:34 000000

1. Sign on a clerk (if necessary).

2. Press <PGM MODE> repeatedly or “4” <PGM MODE> to

PGM-4

1.Keyboard

0.00

Keyboard

1.Key Assign

2.Key Move

assign Program 4 mode.

3. Press the <YES> key.

0.00

Key Move

Please Press the key which you want to move.

0.00

Key Move

Press the new position of the key.

0.00

4. Select “2. Key Move” and press the <YES> key.

5. Press the first key you want to change.

6. Press the second key you want to change.

P-24

Key Move

CASH <-> CHARGE Move OK? (YES/NO)

0.00

7. Press the <YES> key after confirmation.

8. Press <ESC> key to return to the previous menu.

Keyboard layout

The shadowed key cannot be programmed with any other functions.

TE-7000S

RECEIPT JOURNAL

FEED FEED

RECEIPT

OPEN

MEDIA

CHANGE

–

PLU

–

CANCEL

VOID

789 456 123 000•

YES

←

RC PD

PRICE

COVERS

↑

HOME

↓

LIST#

TABLE

TRANS

PAGE

→

PAGE

DOWN

CLK1 CLK2 CLK3 CLK4 CLK5

RECEIPT

PGM

MODE

X/Z

MODE

ON/OFF

6121824

5111723

4101622

3 9 15 21

2 8 14 20

1 7 13 19

REG

MODE

DISP

ON/OFF

CR1 CR2

NEW/OLD

CHK

SUBTOTAL

ESC

/SKIP

CHK/ TEND

AMT

TEND

TE-7000S/8000F/8500F Programming Manual

P-25

Program 4

RECEIPT JOURNAL

FEED FEED

789 456 123 000•

SUBTOTAL

CHK/

TEND

NEW/OLD

CHK

AMT

TEND

25 34 43 52 61 70 79 88 97 106

816243342516069788796105

715233241505968778695104

614223140495867768594103

513213039485766758493102

412202938475665748392101

311192837465564738291100

21018273645546372819099

1 9 17 26 35 44 53 62 71 80 89 98

RC PD

YES

OPEN

VOID

–—

RECEIPT

TABLE

TRANS

COVERS

CANCEL

ESC/ SKIP

HOME

PAGE

DOWN

←

↑

→

↓

TE-8000F

RECEIPT

JOURNAL

FEED FEED

RECEIPT

RC PD

OPEN NO

– ←

–

YES

VOID

789 456 123

↑

HOME

↓

CANCEL

NEW/OLD

CHK

SUBTOTAL

ESC/

SKIP

PAGE

→

PAGE

DOWN

CHK/

TEND

CLK1 CLK2 CLK3 CLK4 CLK5

RECEIPT

ON/OFF

PGM

MODE

X/Z

MODE

REG

MODE

DISP

ON/OFF

918273645546372819099108

817263544536271808998107

716253443526170798897106

615243342516069788796105

514233241505968778695104

413223140495867768594103

312213039485766758493102

211202938475665748392101

000•

AMT

TEND

110192837465564738291100

TE-8500F

P-26

CLK1 CLK2 CLK3 CLK4 CLK5

RECEIPT

ON/OFF

PGM

MODE

X/Z

MODE

REG

MODE

DISP

ON/OFF

3-3. Programming key allocation

Programming different function on the same location of the different menu sheet level.

Method 1

Operation:

First of all, programming one function on one menu sheet by the method of Section 3-1. Next, issue “5. Function Key” report in the “6. Key Feature” of the “PGM Read Report” in PGM 6 mode. And open the function key allocation screen.

P4 C

01 10-10-01 12:34 000001

PGM-4

1.Keyboard

0.00

Keyboard

1.Key Assign

2.Key Move

0.00

1. Sign on a clerk (if necessary).

2. Press <PGM MODE> repeatedly or “4” <PGM MODE> to assign Program 4 mode.

3. Press the <YES> key.

4. Select “1. Key Assign” and press the <YES> key.

Key Assign

000.NOP 001.CASH 002.CHARGE

003.CHECK 004.CREDIT 006.NB

008.PRCINQ 009.STKINQ 010.CHAR

011.PRT 012.CHKP 013.CLK TRAN

014.TBL TRAN 015.TIP 016.NRMRCT

019.LOAN 020.RC 021.PD

022.P.UP. 023.COUPON 025.DEPOSIT

027.- 028.%- 029.+

030.%+ 033.RF 034.VOID

036.CPN2 037.VLD 038.RCT

039.CK.E 040.# 041.#/NS ´

0.00

5. Enter the appropriate record number (in 4-digits) and function code (in 3-digits) and press the corresponding key on the appropriate menu sheet. In case of presetting flat-PLU, you can enter random PLU code instead of record No.

6. Press the <ESC> key to return to the previous menu.

TE-7000S/8000F/8500F Programming Manual

P-27

Program 4

Method 2

Operation:

In case of allocating different functions from the functions of the same location on the first level menu sheet, turn the menu sheet or press the <MENU> key and allocate the function on the menu sheet which you want to put.

P4 C

01 10-10-01 12:34 000001

PGM-4

1.Keyboard

0.00

Keyboard

1.Key Assign

2.Key Move

0.00

Key Assign

000.NOP 001.CASH 002.CHARGE

003.CHECK 004.CREDIT 006.NB

008.PRCINQ 009.STKINQ 010.CHAR

011.PRT 012.CHKP 013.CLK TRAN

014.TBL TRAN 015.TIP 016.NRMRCT

019.LOAN 020.RC 021.PD

022.P.UP. 023.COUPON 025.DEPOSIT

027.- 028.%- 029.+

030.%+ 033.RF 034.VOID

036.CPN2 037.VLD 038.RCT

039.CK.E 040.# 041.#/NS ´

0.00

1. Sign on a clerk (if necessary).

2. Put on the menu sheet you want to program.

3. Press <PGM MODE> repeatedly or “4” <PGM MODE> to assign Program 4 mode.

4. Press the <YES> key.

5. Select “1. Key Assign” and press the <YES> key.

6. Select an appropriate function and press the <YES> key. Then press the corresponding key*. Or select an appropriate function by the function code list (see the next page), enter record No. which is different from the number in the first menu sheet (in 4-digits) and function code (in 3-digits) and press the corresponding key.

* In case of presetting flat-PLU, record No. or random PLU

code is necessary. In case of presetting department/subdepartment, record No. is necessary.

P-28

7. Press the <ESC> key to return to the previous menu.

4. Program 3 ................................................................................. P-32

4-1. Programming machine features............................................................... P-32

4-1-1 Programming pulldown group (adding / modifying / deleting group item)..... P-32

4-1-2 Programming set menu table........................................................................ P-34

4-1-3 Programming arrangement........................................................................... P-36

4-1-4 Programming batch X/Z report...................................................................... P-37

4-1-5 Programming the general feature ................................................................. P-39

4-1-5-1 Programming the machine control 1............................................................. P-39

4-1-5-2 Programming the machine control 2............................................................. P-40

4-1-5-3 Programming the machine control 3............................................................. P-42

4-1-5-4 Programming the machine control 4............................................................. P-43

4-1-5-5 Programming the print control....................................................................... P-44

4-1-5-6 Programming the report control 1 ................................................................. P-45

4-1-5-7 Programming the report control 2 ................................................................. P-46

4-1-5-8 Programming the communication ................................................................. P-47

4-1-5-9 Programming the hourly sales ...................................................................... P-48

4-1-5-10 Programming the slip / guest........................................................................ P-48

4-1-5-11 Programming the journal control................................................................... P-49

4-1-5-12 Programming the message control............................................................... P-50

4-1-5-13 Programming the order control..................................................................... P-50

4-1-5-14 Programming the set menu / condiment....................................................... P-51

4-1-5-15 Programming the check tracking .................................................................. P-52

4-1-5-16 Programming the clerk interrupt.................................................................... P-52

4-1-5-17 Programming the display control .................................................................. P-53

4-1-5-18 Programming the menu shift 1...................................................................... P-54

4-1-5-19 Programming the menu shift 2...................................................................... P-55

4-1-6 Programming scheduler................................................................................ P-56

4-1-7 Programming check print.............................................................................. P-58

4-1-8 Programming table analysis.......................................................................... P-59

4-1-9 Programming tax table.................................................................................. P-60

4-1-10 Programming void table................................................................................ P-63

4-1-11 Programming system connection.................................................................. P-64

4-1-12 Programming I/O parameter ......................................................................... P-65

4-1-13 Programming printer connection................................................................... P-68

4-1-14 Programming time zone................................................................................ P-69

4-1-15 Programming time & attendance .................................................................. P-70

4-1-15-1 Programming time & attendance (general).................................................. P-70

4-1-15-2 Programming time & attendance (job code) ................................................. P-71

4-1-15-3 Programming time & attendance (employee & schedule)............................. P-72

4-1-16 Programming hourly item link ....................................................................... P-74

4-1-17 Programming IDC link................................................................................... P-75

4-1-18 Programming Euro........................................................................................ P-76

4-1-19 Programming auto program control .............................................................. P-77

4-1-20 Programming LCD color control.................................................................... P-78

4-1-21 Programming Australian GST control ........................................................... P-81

4-2. Programming clerks ................................................................................. P-82

4-2-1 Programming clerk features.......................................................................... P-82

4-2-2 Programming operation ................................................................................ P-84

4-2-2-1 Programming clerk control............................................................................ P-84

TE-7000S/8000F/8500F Programming Manual

P-29

Program 3

4-2-2-2 Programming menu shift / 2nd@ .................................................................. P-85

4-2-2-3 Programming mode control........................................................................... P-86

4-2-2-4 Programming function control 1.................................................................... P-87

4-2-2-5 Programming function control 2.................................................................... P-88

4-2-2-6 Programming function control 3.................................................................... P-89

4-2-2-7 Programming function control 4.................................................................... P-90

4-2-2-8 Programming function control 5.................................................................... P-91

4-2-2-9 Programming arrangement control ............................................................... P-92

4-2-2-10 Programming X/Z report control.................................................................... P-93

4-2-3 Programming commission rate ..................................................................... P-94

4-2-4 Programming table range ............................................................................. P-95

4-2-5 Programming clerk control by range............................................................. P-96

4-2-5-1 Programming clerk control by range............................................................. P-96

4-2-5-2 Programming menu shift / 2nd@ by range ................................................... P-97

4-2-5-3 Programming mode control by range............................................................ P-98

4-2-5-4 Programming function control 1 by range..................................................... P-99

4-2-5-5 Programming function control 2 by range................................................... P-100

4-2-5-6 Programming function control 3 by range................................................... P-101

4-2-5-7 Programming function control 4 by range................................................... P-102

4-2-5-8 Programming function control 5 by range................................................... P-103

4-2-5-9 Programming arrangement control by range .............................................. P-104

4-2-5-10 Programming X/Z report control by range................................................... P-105

4-2-5-11 Programming commission rate by range .................................................... P-106

4-2-5-12 Programming table range by range ............................................................ P-107

4-2-6 Programming clerk detail ............................................................................ P-108

4-2-7 Programming clerk key ID........................................................................... P-109

4-3. Programming key features......................................................................P-110

4-3-1 Programming PLU features .........................................................................P-110

4-3-2 Programming PLU 2nd@ features...............................................................P-112

4-3-3 Programming subdepartment features ........................................................P-113

4-3-4 Programming department features ..............................................................P-114

4-3-5 Programming by range ................................................................................P-115

4-3-5-1 General procedure of PLU, PLU 2nd@,

subdepartment, department by range.........................................................P-116

4-3-5-2 Programming hierarchy of programming title...............................................P-117

4-3-6 Programming individual program.................................................................P-118

4-3-7 Programming key function program.............................................................P-119

4-3-7-1 Worksheet for cash, charge, credit and check............................................ P-120

4-3-7-2 Worksheet for new balance ........................................................................ P-121

4-3-7-4 Worksheet for check print ........................................................................... P-122

4-3-7-3 Worksheet for text print, text recall ............................................................. P-122

4-3-7-5 Worksheet for clerk transfer........................................................................ P-123

4-3-7-6 Worksheet for table transfer........................................................................ P-123

4-3-7-7 Worksheet for tip......................................................................................... P-123

4-3-7-8 Worksheet for loan, pick up ........................................................................ P-124

4-3-7-9 Worksheet for received on account, paid out.............................................. P-124

4-3-7-10 Worksheet for plus, minus, coupon............................................................. P-125

4-3-7-11 Worksheet for deposit+, deposit– ............................................................... P-126

4-3-7-12 Worksheet for void ...................................................................................... P-126

4-3-7-13 Worksheet for check endorsement ............................................................. P-126

P-30

+ 198 hidden pages