Casio GD-120TS-1ER Instruction manual

4249252

Alarm Indicators– Flash
Alert Indicator

GD-120

Specifications

 Mineral Glass
 5 Alarms
 Timer
 Stopwatch
 Auto LED Light
 World Time
 Flash Alert
 200M WR

World Time

Stop Watch

Displays the current time in major cities and specific areas Press button C until display shows WT. Scroll through the pre-set

Elapsed time, split time and final time are measured with
1/100-sec accuracy. The watch can measure times of up
to 24 hrs.

A

C

Model variations may differ in appearance from the example above.

cities using button D. The Local time will be displayed for each city.

To swap your home and world time cities, in World Time mode press
buttons A and B simultaneously.

B

D

Auto Light Indicator

Countdown Timer

5 Alarms

Auto Light

Flash Alert
Mineral Glass

Water resistant 200m

A stopwatch that counts backwards: When 0 minutes, 0
seconds is reached, the timer emits a 10-second signal
tone.

The daily alarm reminds you about recurring events with
an acoustic signal at the time you have set. You can also
activate hourly time signals (SIG). This model has 5 inde­pendent alarms which can be set to sound once only or on
a daily basis.

Press button C until TMR is displayed. Press and hold button A to
unlock the watch, Press C to scroll through the flashing fields using
button D to alter where required. Lock your settings with button A
then start/ stop the timer with button D. When stopped you can reset
the timer with button A.

Press button C until the digital displays shows ALM. Choose which of
the 5 alarms to set using button D. Once chosen, press and hold
button A to unlock the setting function. Press C to chose whether to
set the hours or the minutes, and set that section with button D.
Press button A lock your settings and then use button A again to turn
alarm on or off (1-ON= one time alarm)

The back light automatically illuminates the watch face each time the watch is tilted 40 degrees. Activate this feature
by pressing and holding button B until the LT indicator turns on.

When flash alert is turned on the illumination flashes for alarms. Hold A. until seconds flash, press C. ten times, press

D. to toggle flash alert on and off.

Artificially manufactured glass with improved level of hardness and scratch resistance.

Perfect for free diving without scuba equipment.

Technical Enquiry/ Seng Assistance: 020 8450 9131 email: [e-mail]