Casio 5588 User Manual

MA1812-EA

Quick Reference Manual 5588

Congratulations upon your selection of this CASIO watch. To ensure that this watch provides you with the years of service for which it is designed, carefully read and follow the instructions in this manual, especially the information under “Operating Precautions” and “User Maintenance”. Be sure to keep all user documentation handy for future reference.

Bluetooth® is a registered trademark or trademark of Bluetooth SIG, Inc. of the United States.

This product has a Mobile Link function that lets it communicate with a Bluetooth® capable phone to perform automatic time adjustment and other operations.

x This product complies with or has received approval under radio laws in various

countries and geographic areas. Use of this product in an area where it does not conform to or where it has not been approved under applicable radio laws may be punishable under local laws. For details, visit https://world.casio.com/ce/BLE/.

x Use of this product inside of an aircraft is restricted by the aviation laws of each

country. Be sure to obey instructions provided by flight personnel concerning use of devices such as this product.

Visit the website below for the operation manual (Operation Guide) of this watch.

https://world.casio.com/manual/wat/

Using the Watch

Charging

Remove the watch from your wrist and place it in a brightly lit area.

x The watch may become hot when exposed to light for charging. Take care to avoid

burn injury.

x Avoid charging in locations where it is very hot.

Power Saving

x Leaving the watch in a dark location for about one hour between the hours of 10p.m.

and 6a.m. will cause the second hand to stop at 12o’clock.

x Leaving the watch in a dark location for about one week will cause all hands to stop.

Battery Alerts

x Low Battery

Second hand jumps every two seconds (Low Battery Alert).

x Dead Battery

All hands stopped.

General Guide

* Hold down B for at least 2.5 seconds to establish a Bluetooth connection with a phone.

Selecting a Mode

Each press of C cycles between modes as shown below.

x Hold down C for at least one second to enter the Calendar Mode.

Calendar Mode Stopwatch

9 10

Crown

Click 1

Mode

C CC

1. E///F: Battery status

2. Day of the week: SU, MO, TU, WE, TH, FR, SA

3. Hour and minute hands: Current time

4. Bluetooth connection: C*

5. Alarm status: ON, OFF

Click 2

• Auto adjust: Enabled (YES)/

Disabled (NO)

• Auto adjust: Successful (YES)/

Failed (NO)

7. Mode: ST (Stopwatch), TR (Timer), AL (Alarm)

8. Auto summer time: AT

9. Standard time: STD

10.

Summer time: DST

11.

Time signal reception in progress

12.

Dual Time dial

13.

Current setting a.m./p.m. (when setting the time): A, P

Timer Mode Alarm Mode

Setting the Time

1. Rotate the crown towards you to loosen it.

2. Pull the crown out to the second click.

3. Hold down C for at least one second.

x This enables setting of the hour and minute.

4. Rotate the crown to change the current hour and minute setting.

x The second hand will indicate a.m. (A) or p.m. (P).

5. Press C.

x This enables the year 10’s digit setting.

6. Rotate the crown to change the year 10’s digit setting.

7. Press C.

x This enables the year 1’s digit setting.

8. Rotate the crown to change the year 1’s digit setting.

9. Press C.

x This enables the month setting.

10.

Rotate the crown to change the month setting.

11.

Press C.

x This enables the day setting.

12.

Rotate the crown to change the day setting.

13.

After the settings are the way you want, push the crown back in and then screw it securely into place.

Changing the Dual Time, Alarm Time, or Timer Time Setting

1. Use C to navigate to the mode whose time setting you

want to change.

2. Rotate the crown towards you to loosen it.

3. Pull the crown out to the first click.

4. Rotate the crown to move the hands to the time you want to set.

5. After the setting is the way you want, push the crown

back in and then screw it securely into place.

Year 10’s Digit Setting

Year 1’s Digit Setting

Month Setting

Month Day

Dual Time dial,

a.m./p.m. hand

Specifications

Accuracy at Normal Temperature:

Timekeeping: Hour, minute (hands move at 10-second intervals), second; date,

Signal Receive Function:

Stopwatch: Measuring unit: 1 second

Alarm: Setting units: Hour, minute

Countdown Timer: Countdown unit: 1 second

Mobile Link Functions:

Other: Power Saving, Battery level indicator, High-brightness LED light,

Power Supply: Solar panel and 1 rechargeable battery

Battery Operating Time:

Specifications are subject to change without notice.

15 seconds a month

day of the week

Calendar system: Full-auto calendar from 2000 to 2099 Others: Dual time (hour, minute, 24-hour timekeeping, 27 time zones,

auto summer time setting, Home Time/Dual Time swapping)

Auto receive, manual receive Auto transmitter selection (for JJY, MSF/DCF77) Receivable call signs: JJY (40kHz/60kHz), BPC (68.5kHz), WWVB

Measuring capacity: 23:59'59" (24 hours) Measurement functions: Elapsed time, Flyback timing

Beeper: 10 seconds

Countdown range: 24 hours Setting unit: 1 minute Time up: 10-second beeper

Auto Time Correction

Time setting adjusted automatically at preset time.

One-touch Time Correction

Manual connection and time adjustment

Phone finder

Watch operation sounds the alert sound of the mobile phone.

World Time

Current time for approximately 300 cities selected for the watch Home Time/World Time swapping

Auto summer time switching

Automatic switching between standard time and summer time Timer Setting Alarm Setting Hand position correction Data Communication Specifications

Bluetooth

Frequency Band: 2400MHz-2480MHz

Maximum Transmission: 0 dBm (1 mW)

Communication range: 2 meters max. (depends on environment)

Auto Correction of Hand Home Positions

Approximately 5 months Conditions

Not exposed to light under the conditions below.

x Auto time adjustment: 4 times/day x Light: 1 operation/day x Alarm: Once (10 seconds)/day x Power Saving: 6 hours/day

(60kHz), MSF (60kHz), DCF77 (77.5kHz)