Casio 5582 User Manual

MA1811-EA
© 2019 CASIO COMPUTER CO., LTD.
Quick Reference Manual 5582
Congratulations upon your selection of this CASIO watch.
Bluetooth® is a registered trademark or trademark of Bluetooth SIG, Inc. of the United States.
Your watch has a Mobile Link function that allows it to communicate with a Bluetooth® mobile phone and adjust its time settings to match those of the mobile phone.
x This product complies with or has received approval under radio laws in various
countries and geographic areas. Use of this product in an area where it does not conform to or where it has not been approved under applicable radio laws may be punishable under local laws. For details, visit https://world.casio.com/ce/BLE/.
x Use of this product inside of an aircraft is restricted by the aviation laws of each
country. Be sure to obey instructions provided by flight personnel concerning use of devices such as this product.
Visit the website below for the operation manual (Operation Guide) of this watch.
https://world.casio.com/manual/wat/
Using the Watch
Charging
Remove the watch from your wrist and place it in a brightly lit area.
x The watch may become hot when exposed to light for charging. Take care to avoid
burn injury.
x Avoid charging in locations where it is very hot.
Power Saving
x Leaving the watch in a dark location for about one hour between the hours of 10p.m.
and 6a.m. will cause the second hand to stop at 12o’clock.
x Leaving the watch in a dark location for about one week will cause all hands to stop.
Battery Alerts
x Low Battery
Second hand jumps every two seconds (Low Battery Alert).
x Dead Battery
All hands stopped.
General Guide
1
2
3
4
5
* Hold down C for about 1.5 seconds to establish a Bluetooth connection with a phone.
Selecting a Mode
Each press of D cycles between modes as shown below.
x Hold down D for at least two seconds to enter the Timekeeping Mode.
Timekeeping
Mode
D
World Time Mode
1. Graphic area
6
2. Summer time display indicator
7
3. Phone connection standby
8
4. Phone connected*
9
5. Battery level
10
6. p.m. indicator (No indication for a.m.)
11
7. Hourly time signal enabled
8. Alarm enabled
9. Auto Light enabled
10.
Recall Mode indicator
11.
Hands shifted
12
12.
Speed display indicator
13
13.
Timer Mode indicator
14
14.
Alarm Mode indicator
15
15.
World Time Mode indicator
Stopwatch Mode Recall Mode
D
Alarm Mode
D
D
Timer Mode
Setting the Time
1. In the Timekeeping Mode, hold down
A. Release the button when the city name appears.
x [SET] will flash and then the city name
will appear.
City name
2. Press D twice display the seconds
setting screen.
3. Press E to reset the seconds count
to 00.
x 30 to 59 seconds: Adds 1 to minutes.
4. Press D to move the flashing to the
hour setting.
5. Use E and B to change the setting.
6. Press D to move the flashing to the
minute setting.
7. Use E and B to change the setting.
8. Press D to move the flashing to the
year setting.
9. Use E and B to change the setting.
10.
Press D to move the flashing to the month setting.
11.
Use E and B to change the setting.
12.
Press D to move the flashing to the day setting.
13.
Use E and B to change the setting.
14.
Press A to exit the setting screen.
Specifications
Accuracy at Normal Temperature:
Analog Timekeeping: Hour, minute (moves every 10 seconds), second
Digital Timekeeping: Hour, minute, second, month, day, day of the week,
Stopwatch/Data Recall: Measurement unit: 1/1000 seconds (first hour);
Timer: Measuring unit: 1/10 seconds
World Time: Current time in 39 cities (39 time zones) plus UTC time;
Alarms: Alarms: 5
Mobile Link: Auto time correction
Other: High-brightness DOUBLE LED light; illumination duration
Power Supply: Solar panel and 1 rechargeable battery
Approximate Battery Life: 6 months
Specifications are subject to change without notice.
±15 seconds per month average when time adjustment by communication with a phone is not possible.
a.m./p.m. (P)/24-hour timekeeping, Full Auto Calendar (2000 to 2099), Summer Time
Measurement range: 23 hours, 59 minutes, 59.9 seconds Measurement functions:
Countdown range: 24 hours Setting unit: 1 second 10-second beeper at countdown end
summer time; Home City/World Time swapping
Selectable alarm type: DAILY, 1TIME, SCHEDULE DAILY, 1TIME
Setting units: Hour, minute
SCHEDULE
Setting units: Year, month, day, hour, minute
Alarm tone duration: 10 seconds
Hourly time signal: Beep every hour on the hour
Time setting adjusted automatically at preset time.
One-touch time correction
Manual connection and time adjustment
Phone finder
Watch operation sounds the alert sound of the mobile phone.
World Time
Current time for approximately 300 cities selected for the watch Home Time/World Time swapping
Stopwatch data transfer
200 lap time records (date and time, lap time, lap number)
Auto summer time switching
Automatic switching between standard time and summer time Timer setting Alarm setting Hand position correction Data Communication Specifications
Bluetooth
Frequency band: 2400 MHz to 2480 MHz
Maximum transmission: 0 dBm (1 mW)
Communication range: 2 meters max.
setting; Auto Light Switch (Full Auto Light operates only in the dark); operation tone on/off; Hand Shift; Battery level indicator, Power saving
Conditions:
x Auto time correction: 4 times/day x Alarm: Once (10 seconds)/day x Illumination: Once (1.5 seconds)/day x Power saving: 6 hours/day
1/10 seconds (after first hour)
Normal elapsed time; cumulative time; lap times; 200-record data memory
®
(depends on environment)
DD
1
Loading...