Casio 5566 User Manual

MA1707-EA

Operation Guide 5566

x Be sure to keep all user documentation handy for future reference. x Your watch may differ somewhat from the one shown in the illustration.

Day of the week

24-Hour Hand

Crown Operations

Some water-resistant models (100meters, 200meters) have a screw-in crown. When you need to perform a crown operation, rotate it towards you to unscrew it. Then pull the crown out. Avoid applying undue force when pulling. The watch loses its water resistance while the crown is unscrewed. After performing a crown operation, fully screw the crown back in.

If your watch has a rotary bezel...

You can rotate the bezel to align its ▼ mark with the minute hand. Then you will be able to tell how much time has elapsed since aligning the ▼ mark.

Day

Click 2

Click 1

Crown

Current

Specifications

Accuracy at normal

temperature (per month)

±15 seconds SR920SW Approx. 2 years

Battery type Battery life

Crown

Loosen

Start

Elapsed time

To adjust the day of the week and time

When the second hand is at 12o’clock, pull

Crown out to Click 2.

the

Rotate the Crown away from you to advance the hour and minute hands until the day of the week you want is indicated. The day of the week setting will change when the current time is between 2:00a.m. and 4:00a.m.

x When setting the day of the week, do not

rotate the crown towards you to try and move the hands back.

Rotate the Crown to change the time setting.

Push the Crown back in on a time signal to resume timekeeping.

To change the day setting

Pull the Crown out to Click 1.

Rotate the Crown towards you to set the day.

Push the Crown back in.

Note

x Take care that you set the

correct AM or PM time.

x When changing the time,

move the minute hand four or five minutes past your final setting, and then back it up to the setting you want.

x The 24-Hour Hand indicates

the current hour of the day. It makes one complete rotation every 24hours.

Note

x The day setting uses a

31-day month. Make adjustments for months of shorter lengths.

x Avoid changing the day

setting between the hours of 10p.m. and 2a.m. Otherwise, the day setting may not change correctly at midnight.

Specifications are subject to change without notice.