Casio 5562 User Manual

MA1710-EA

User’s Guide 5562

For a full Operation Guide and Q&A information about this product, go to the website below.

http://world.casio.com/manual/wat/

E-2

Charging the Watch

x While wearing the watch, take care so your sleeve does not

block its face (solar panel) from light. Charging efficiency may be reduced if the face (solar panel) is blocked from light, even partially.

x When you are not wearing the watch, leave it where its face

(solar panel) is exposed to bright light for charging.

x To help ensure stable operation, expose the face of the

watch to about a half day of direct sunlight each month to charge it.

Caution

x The case of the watch may become extremely hot when charging. Guard against

burn injury.

E-4

Congratulations upon your selection of this CASIO watch.

To ensure that this watch provides you with the years of service for which it is designed, carefully read and follow the instructions in this manual, especially the information under “Operating Precautions” and “User Maintenance”. Be sure to keep all user documentation handy for future reference.

Important!

x Keep the watch’s face exposed to light as much as possible. x This manual provides a brief overview of your watch.

Contents

Charging the Watch ........................................................................................... E-4

To recover from the sleep state ...................................................................... E-7

Configuring Home City, Time and Date Settings ............................................. E-8

To configure Home City, time, and date settings ............................................ E-8

Mode Selection and Operations .....................................................................E-12

Misaligned Hands............................................................................................. E-17

Specifications ................................................................................................... E-18

Operating Precautions ..................................................................................... E-20

User Maintenance ............................................................................................ E-31

Important!

x If the watch is not exposed to light for long periods, it will disable some functions

and eventually stop timekeeping.

x For information about how long it takes to charge, refer to the Operation Guide

available at the CASIO website.

x If timekeeping stops, you will need to expose the watch to light for anumber of

hours before it will restart.

ENGLISH

Power Levels

x If the battery power indicator shows L or is not displayed at all, it means that

battery power is very low. Expose the watch to bright light for charging as soon as possible.

You can get an idea of the watch’s power level by observing the battery power indicator.

E-1

E-3

E-5

Power Saving

When turned on, Power Saving enters a sleep state automatically whenever the watch is left for a certain period in an area where it is dark.

Elapsed Time in Dark Digital Displays Operation

60 to 70 minutes (display sleep) Blank

6 or 7 days (function sleep) Blank

x The watch will not enter a sleep state between 6:00 AM and 9:59 PM. If the watch

is already in a sleep state when 6:00 AM arrives, however, it will remain in the sleep state.

x The watch will not enter a sleep state while it is in the Stopwatch Mode or

Countdown Timer Mode.

E-6

Digital display is disabled, but all functions are enabled.

Hour and minute hands stop at 12o’clock. All functions are disabled, but timekeeping is maintained.

Configuring Home City, Time and Date Settings

x Configure Home City and summer time settings first. After that, configure time and

date settings.

To configure Home City, time, and date settings

City code

E-8

1. In the Timekeeping Mode, hold down A for about two

seconds until ADJ is displayed. When you release A, the city code and city name will scroll from right to left. This is the setting screen.

x The hour and minute hands will automatically move

out of the way at this time.

To recover from the sleep state

Move the watch to a well-lit area, press any button, or angle the watch towards your face for reading.

2. Press C to move the flashing in the sequence shown below to select a setting.

Home City and Summer Time Time and Date

City Code

Power Saving Hour

C C

Button Operation Tone On/Off

Illumination Duration Minute

DST

12/24-Hour Format

Day

Month

Seconds

Year

E-7

E-9

User’s Guide 5562

3. Use B and D to change the selected setting.

Screen This setting item: Operation

E-10

Home City

Summer time

OFF: Standard time ON: Summer time

Toggle between 12-hour (12H) and 24-hour (24H) timekeeping

Reset the seconds to 00

x 30 to 59 seconds: Adds 1 to minutes

Change the hour or minute

Change the year, month, or day

Use D (East) and B (West).

Press D.

Use D (+) and B (–).

Mode Selection and Operations

x Press C to change the mode. x To return to the Timekeeping Mode from any other mode, hold down C for at

least four seconds.

E-12

Stopwatch Mode

Split/Reset

Timekeeping Mode

World Time Mode Alarm Mode

Stopwatch Mode Countdown Timer Mode

Countdown Timer Mode

Reset

Screen This setting item: Operation

4. Press A to exit the setting screen.

Timekeeping Mode

x A (two seconds): Displays setting (Home

City, time, date, etc.) screen.

x A: Changes digital display contents.

Month, day, day of the week Month, day, second Hour, minute, second

Enabling and disabling the button tone

KEY : ON (enabled) MUTE: OFF (disabled)

Enabling and disabling power saving

Display illumination duration

[ ]: Approximately 1.5 seconds [ ]: Approximately 3 seconds

Turns on illumination.

x A + B: Swaps Home Time and World

Time.

x Holding down A for about two seconds

will toggle summer time (DST) between on and off.

Toggle on and off.

Alarm Mode

Press D.

World Time Mode

E-11

Scrolls the selected city.

E-13

Start/Stop

D D A

Start Stop Reset

E-14

Auto Light

x In the Timekeeping Mode, hold down B for about three seconds to toggle Auto

Light between enabled (ON) and disabled (OFF).

x While Auto Light is enabled, illumination will turn on if the watch is angled at about

40 degrees or more from horizontal where lighting is dim.

Hand Shift

x Hold down C for about two seconds. Release the button when HAND appears on

the digital display. This operation will toggle between shifted hands (for easy digital display reading) and unshifted hands (normal timekeeping).

x The hands also will move away from the digital display automatically whenever you

display a setting screen in the Timekeeping Mode, Countdown Timer Mode, or Alarm Mode.

E-16

x A (two seconds): Displays timer time setting

screen. C: Selects minutes or seconds. B, D: Use to change the selected setting.

x A: Exits the setting screen.

Start/Stop

Specifications

Accuracy at normal temperature: ±15 seconds a month Timekeeping: Hour, minutes, seconds, p.m. (PM), year, month, day, day of the

Time format: 12-hour and 24-hour Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099 Other: Home City code (can be assigned one of 48 city codes); Standard Time/

World Time: 48 cities (31 time zones)

Other: Daylight Saving Time/Standard Time

Stopwatch:

Measuring unit: 1/100 second Measuring capacity: 59'59.99" Measuring modes: Elapsed time, split time, two finishes

Countdown Timer:

Measuring unit: 1 second Countdown range: 100 minutes Setting unit: 1 second

E-18

week, alarm countdown

Daylight Saving Time (summer time)

Scrolls alarm screens.

x A (two seconds): Displays alarm time setting screen.

C: Selects hour or minutes. B, D: Use to change the selected setting.

x A: Exits the setting screen. x From 60 minutes before the alarm time is reached, the alarm mark will start to ﬂ ash and a

countdown will appear in the Timekeeping Mode.

Misaligned Hands

The analog hands may become misaligned as described below if the watch is exposed to strong magnetism, impact, or other abnormal conditions.

x Analog time and digital time are different from each other

If this happens, refer to “Hand Home Position Adjustment” in the Operation Guide available at the CASIO website and adjust the hand alignment.

Alarms: 5 Daily alarms; Hourly Time Signal Double LED light: LED light for the face (Full auto LED light, Neon illuminator,

Other: Battery power indicator; Power Saving; Button operation tone on/off Power Supply: Solar panel and one rechargeable battery

Approximate battery operating time: 8 months under the following conditions:

x Display on 18 hours per day, sleep state 6 hours per day x 1 illumination operation (1.5 seconds) per day x 10 seconds of alarm operation per day x 1 hand movement for easy viewing of digital information per day

Frequent use of illumination runs down the battery.

Specifications are subject to change without notice.

selectable illumination duration, afterglow) LED backlight for the digital display (Full auto LED light, Super illuminator, selectable illumination duration, afterglow)

E-15

E-17

E-19

+ 1 hidden pages