Carnes SLRB 114 05 User Manual
SPECIFICATION SHEET
Model SPRB (Steel Contruction) - Return Round Neck
Model SLRB (Aluminum Contruction) - Return Round Neck
Stamped Perforated Diffuser - T-bar Lay In
CARNES COMPANY © 2010 COPYRIGHT
ALL RIGHTS RESERVED
SUPERSEDES 12638-F 12638-G, Page 1/2
DIMENSIONS LISTED IN INCHES (Millimeters)
Options
Model Drop Alum.
Number Face Face A B C
05 4-7/8 (124)
06 5-7/8 (149)
SL/SPRB 114
07
N/A A 11-3/4 (299)
6-7/8 (175)
2-1/2 (64)
08 7-7/8 (200)
05 4-7/8 (124)
06 5-7/8 (149)
07 6-7/8 (175)
08 7-7/8 (200)
10 9-7/8 (251)
SL/SPRB 224
12
D A 23-3/4 (603)
11-7/8 (302)
2-3/4 (70)
14 13-7/8 (352)
16 15-7/8 (403)
18 17-7/8 (447)
20 19-7/8 (505)
Notes:
• Construction of SPRB is steel ceiling
plate and steel face plate.
• Construction of SLRB is aluminum
ceiling plate and aluminum face plate.
• Model SPRB is available with an
aluminum face plate as an option.
• Metric dimensions are given in
millimeters.
• Standard finish is electrocoat acrylic
baked enamel.
• Standard color is #11 bright white.
• Inlet is undersized by 1/8” (3) to fit
inside standard duct.
• 24” x 24” face T-bar frame (Frame 4)
is shown above with standard face
(Face C or A).
OPTIONAL DROP
FACE
1/2”
(13)
SECTIONAL
VIEW
1-1/4” (38)
SAFETY RETAINER
IS STANDARD
FACE VIEW
SECTIONAL VIEW
“C”
“A”
SQ.
PERFORATED FACE
MODEL SPRB - Steel Constuction
MODEL SLRB - Aluminum Construction
Imperial [IP] Dimensions
Metric (SI) in Parentheses
CARNES COMPANY 448 S. Main St., P. O. Box 930040, Verona, WI 53593-0040 Phone: (608)845-6411 Fax: (608)845-6504 www.carnes.com
“B”
DIA. OUTSIDE
Detail of Perforated
Hole Pattern
Free area is approximately
51%.
1/4” (6)
3/16” (5)
CARNES COMPANY © 2010 COPYRIGHT
ALL RIGHTS RESERVED
SUPERSEDES 12638-F 12638-G, Page 2/2
SPECIFICATION SHEET
Model SPRB (Steel Contruction) - Return Round Neck
Model SLRB (Aluminum Contruction) - Return Round Neck
Stamped Perforated Diffuser - T-bar Lay In
Imperial [IP] Dimensions
Metric (SI) in Parentheses
CARNES COMPANY 448 S. Main St., P. O. Box 930040, Verona, WI 53593-0040 Phone: (608)845-6411 Fax: (608)845-6504 www.carnes.com
Standard T-Bar Mount
Frame 4
Standard Face C (Steel) or A (Aluminum)
• Fits 15/16” and 9/16” flat-face T-bar.
• Use with KXFA Auxiliary Frame for surface
mount applications.
Nom. Face 12” x 12” 24” x 24”
Unit Height (A) 1-1/4” (32) 1-1/2” (38)
Unit Width (B)
11-3/4”
(298)
23-3/4”
(603)
A
B
15/16” Tegular Mount
Frame 4
Drop Face D (Steel) or B (Aluminum)
• Fits 15/16” and 9/16” flat-face T-bar.
• Fits 15/16” tegular ceilings.
• Use with KXFA Auxiliary Frame for surface
mount applications.
Nom. Face 12” x 12” 24” x 24”
Unit Height (A) 1-1/4” (32) 1-1/2” (38)
Unit Width (B)
11-3/4”
(298)
23-3/4”
(603)
Face Width (C) 11” (279) 23” (584)
A
B
C
1/2” (13)
Surface Mount
Frame 2
Standard Face C (Steel) or A (Aluminum)
• For use with hard duct or special mounting
by contractor.
• Not available with 24” x 24” aluminum
ceiling plate.
Nom. Face 12” x 12” 24” x 24”
Unit Height (A) 1-3/16” (30) 1-7/16” (37)
Unit Width (B)
12-1/2”
(318)
24-1/2”
(622)
Rec. Ceiling
Opening (C)
11”
(279)
23”
(584)
A
B
C
3/32” (2)
Surface Mount with Drop Face
Frame 2
Drop Face D (Steel) or B (Aluminum)
• For use with hard duct or special mounting
by contractor.
• Not available with 24” x 24” aluminum
ceiling plate.
• Face projects 1/2” (13) below ceiling plate.
A
B
C
3/32” (2)
Nom. Face 12” x 12” 24” x 24”
Unit Height (A) 1-3/16” (30) 1-7/16” (37)
Unit Width (B)
12-1/2”
(318)
24-1/2”
(622)
Rec. Ceiling
Opening (C)
11”
(279)
23”
(584)
Donn®Fineline®Style and 9/16” Tegular Mount
Frame 9
Standard Face C (Steel) or A (Aluminum)
• Fits Donn
®
Fineline®style ceilings.
• Fits 9/16” tegular ceilings.
A
B
C
3/8” (10)
Nom. Face 12” x 12” 24” x 24”
Unit Height (A) 1-3/16” (30) 1-7/16” (37)
Unit Width (B)
12-1/2”
(318)
23-3/4”
(603)
Face Width (C)
11-3/8”
(289)
23-3/8”
(594)
Concealed Spline Mount
Frame 8
Standard Face C (Steel) or A (Aluminum)
• Fits concealed spline ceilings.
• Sliding pin locks ceiling plate to grid.
• Pin is concealed for architectural appeal.
A
B
C
9/16” (14)
Nom. Face 12” x 12” 24” x 24”
Unit Height (A)
1-3/16”
(30)
1-7/16”
(37)
Unit Width (B)
11-31/32”
(304)
24-31/32”
(609)
Drop (C) 3/8” (10) 3/8” (10)
Loading...