Carnes SLJB 114 06 User Manual
SPECIFICATION SHEET
Models SPJB and SLJB
Stamped Perforated Diffuser
T-bar Lay In
COPYRIGHT © 2009 CARNES COMPANY
ALL RIGHTS RESERVED
SUPERSEDES 12639-D 12639-E
DIMENSIONS LISTED IN INCHES (Millimeters)
Options
Model Drop Alum.
Number Face Face A B C
06 6x6 (152x152)
SL/SPJB 114
08
N/A A 11-3/4 (299)
8x8 (203x203)
3 (76)
06 6x6 (152x152)
08 8x8 (203x203)
10 10x10 (254x254)
SL/SPJB 224 12 D A 23-3/4 (603) 12x12 (305x305) 3-1/4 (83)
14 14x14 (356x356)
16 16x16 (406x406)
18 18x18 (457x457)
Notes:
1. Standard finish #11 white electrocoat
enamel.
OPTIONAL DROP
FACE
1/2”
(13)
SECTIONAL
VIEW
1-3/4” (44)
SAFETY RETAINER
IS STANDARD
FACE VIEW
SECTIONAL VIEW
“C”
“A”
SQ.
PERFORATED FACE
MODEL SPJB - Steel Constuction
MODEL SLJB - Aluminum Construction
Imperial [IP] Dimensions
Metric (SI) in Parentheses
CARNES COMPANY 448 S. Main St., P. O. Box 930040, Verona, WI 53593-0040 Phone: (608)845-6411 Fax: (608)845-6470 www.carnes.com
“B”
SQ. INSIDE
Detail of Perforated
Hole Pattern
Free area is approximately
51%.
1/4” (6)
3/16” (5)
Loading...