Carnes CCQBG User Manual
SPECIFICATfON SHEET
MODELS CCQB and CCRB with Option H - CURTAINAIRE
~
CARNESCOMPANY, 448 S. MainSt., P. O. Box930040, Verona,W1.53593-0040 Phone 608/845-8411 Fax 808/845-6470
EXTRUDED ALUMINUM LINEAR REGISTERS & GRILLES
Ceiling & Sidewall Application (1/4” Bars on 1/2” Centers)
DIMENSIONS LISTED IN INCHES
Available Sizes*
Listed Listed
Degree
Blade Straightening
Modet Deflection Damper
CCQBG o NO
CCRBG 15 NO
CCQBD
CCRBD 15
CCQBS o
CCRBS
CCQBB
CCRBB
*Minimum & Maximum single unit sizes. Larger list widths furnished as separate pieces.
~;}$/;f’:~~3 (01)
o YES
YES NO
NO
15
0 YES
15 YES
NO
Vanes
NO
NO
NO
YES
YES
YES
YES
SUPERSEDES 121 56-D 12156-E
Size Size
Height Width
Min. Max. Min. Max.
2 24 6 72
2 24 6 72
2 24 6 72
2 24 6 72
12 6 72
2
2 12 6 72
2 12 6 72
12 6 72
2
NOTES:
1. Single blade damper on Size 2“.
2. Opposed blade damper on Size 2%” and
larger.
3. Option H isconcelaed hanger for side wall
or ceiling.
4. All ducts by others.
‘ 5. Standard finish #26, sanded, etch and
lacquer.
.,
[s]
METRIC DIMENSIONS
(Standard on Reveme Side)
MODELS CCQB and CCRB with Option H — CURTAINAIRE
SPECIFICATION SHEET
EXTRUDED ALUMINUM LINEAR REGISTERS & GRILLES
Ceiling & Sidewall Application (6.4mm Bars on 12.7mm Centers)
CARNES COMPANY, 448 S. Main St., P. O. Box 930040, Verona, W1.53593-0040 Phone 608/845-6411 Fax 606/845-6470
DIMENSIONS IN MILLIM&TERS
Available Sizes*
Listed
Degree
Biade
Modei
CCQBG
CCRBG
CCQBD
CCRBD
CCQBS
CCRBS
CCQBB
CCRBB
*Minimum & Maximum singleuniteizea Larger list widths furnished as separatepieces.
W%*!XS%!Y ml)
Defection
o
15
o
15
o
15 NO
o
15 YES
Damper
NO
NO NO
YES
YES
NO
YES
Straightening
Vanes
NO
NO
NO 51 610 152 1829
YES 51 305 152 1829
YES 51 305 152 1829
YES 51
YES 51
SUPERSEDES 12156-D
Size Size
Height Width
Min. Max. Min. Max.
51 610 152 1829
51 610 152 1829
610 152 1829
51
305 152 1629
305 152 1829~
Listed
NOTES:
1.Single biade damper on Size 51mm.
2. Opposed blade damper on Size 64mm
and larger,
3. Option H is concelaed hanger for side
wall or ceiling.
4. All ducts by others.
5. Standard finish #26, sanded, etch and
lacquer.
I
12156-E [M]
Loading...