CaptiveAire FMD 20 Installation Manual

Instruction Manual

20 memories time switches

1

page

Safety precautions ..................................................................... 2

Program structure ......................................................................3

OK

reset

Symbols, keys .............................................................................5

Menu

Prog

Setting the timer ........................................................................6

Setting 24h or am/pm clock, time and weekday ..................... 7

Prog.

Pre-set programs ....................................................................... 9

P0x

prog

Selecting pre-set programs P01 to P03 .................................... 10

P--

prog

User defined programs .............................................................. 11

del

Deleting programs .....................................................................15

+1h

Summer/winter time .................................................................. 16

Automatic

Warranty ...................................................................................... 18

operation / fixed ON / fixed OFF .............................17

Safety precautions

· The connection and installation of electrical devices may only be
carried out by a qualified electrician.

· Interventions in and changes to the device result in the voiding of
the warranty claim.

· Observe your national regulations and the respective safety
provisions.

· Switch-off commands have priority over switch-on commands.

2

Set time: Format 24h or am/pm

24h blinking, using +/- to select, then OK

Set time: Hour

Hour blinking, using +/- to select, then OK

Set time: Minute

Minute blinking, using +/- to select , then OK

Set time: Day

Monday blinking, using +/- to select , then OK

Set Program: P01 / P02 /
P03 or P-­Using +/- to select, then OK
to set ON/OFF times
or
press Menu to terminate
programming

P01-03, P-­Set switching times:
First free memory location
blinks.
Press ''-''to go back one
memory location.
Press OK for setting the
switching times

Prog01
Set switching times:
First free memory location
blinks.
Press OK for setting the
switching times

First installation setting Review/adjust

Menu

OKMenu

Note:
P01-03
are pre-set

3

Set switching ON time: Hour

Hour blinking, using +/- to select, then OK

Set switching ON time: Minute

Minutes blinking, using +/- to select , then OK

Set switching ON time: Days

Mo-Su blinking, using +/- to select , then OK

Set switching OFF time: Hour

Hour blinking, using +/- to select, then OK

Set switching OFF time: Minute

Minutes blinking, using +/- to select , then OK/Menu

A maximum of 20 memory locations
can be occupied
10 switching ON times
10 switching OFF times

Menu

RUN

4