Canon ZR-2000 User Manual

(f)

a:

0

.

~

1:1

Canon Zoom

ZR-2000

INSTRUCTIONS

Remote

Controller

Thank you for purchasing the Canon Zoom Remote Controller
most

out

of

your

ZR-2000,

thoroughly and keep them

When

camcorder, it
the zoom and the focus functions
without touching the camcorder. This is particularly useful while the camcorder is
mounted

the remote

on

a tripod and you want to ensure maximum stability of a shot.

controller

is

possible to control functions such as the start and stop of recording,

1.Nomenclature

CD

Connection

Plug

into the

® ZOOM SPEED dial

Rotate the dial to set the desired zoom speed.

• Y]

(variable): The zoom speed depends on the way you operate the zoom

Press lightly for a slower zoom or press firmly for a quicker zoom.

• 1 - 16: Fixed zoom speed positions from 1 (slowest zoom speed) to 16 (fastest
zoom speed).

@ STANDBY

Keep
camcorder's power and enter the

• Press again to turn the camcorder back on.

@)

ON

SCREEN button

•

Camera mode:
TV screen when you do not need them.

• VCR
Press

®

PUSH

While the
switch

The autofocus

®

FOCUS selector

Set the
While the camcorder is
FOCUS/AE SHIFT

(J)

FOCUS/

Set

the operating function of the

(![!

PEAKING

Press
subject will be emphasized

(

[)

START/STOP button

Press

the button during record pause to start recording.

temporarily pause the recording.

@

MAGNIFYING

Press

the button to activate the Magnifying display function: The center of the
screen will be magnified
easier.

@ Zoom

• Press
Set

Q~

FOCUS/AE SHIFT dial

The operation of the dual-purpose dial
AE

• FOCUS:

•

@ Tripod Fitting

Secures

tripod fitting that best fits the diameter of your

•

•

lever (T

• Press

the zoom speed with the

SHIFT selector.

focal distance. Keep turning
AE

SHIFT:

level.

A:

Fits handle of diameter approx. 6-12 mm (

B:

Fits handle of diameter approx. 12-18 mm (

plug

LANC

button

the

button

Press

mode: Press

again to hide the displays.

AF button

camcorder

is

set to OFF) press the button to momentarily override the manual focus.

will

camcorder

AE

SHIFT selector

button

the button to activate the

button

/W)

toward W to zoom out to wide-angle.
toward T to zoom

Turn towards - for a closer

Turn towards

the ZR-2000

we

recommend

in

a safe place for future reference.

is

connected

while

reviewing the picture on the

4!

terminal of a compatible camcorder.

pressed

the button to show the on-screen displays during playback.

be activated as long as you keep the button pressed down.

's focusing mode to

dial

for

more

than

Power Save

the button to hide the displays that appear

is in manual focus

in

manual focus mode, focus the

on

the side of the

FOCUS/AE SHIFT dial

Peaking display

in

order to make manual focusing easier.

approximately

in

to telephoto.

ZOOM SPEED

will depend on the position of the FOCUS/

focal

towards+

-for

a lower AE level; turn towards + for a higher AE

onto the tripod panning handle. Choose the section of the

that

you read

to

the

LANC

2

seconds

mode.

Press

again to reactivate the displays.

mode

(and the POSITION

manual

ZR-2000.

2x in

to set the infinity focus

focus (MF) or autofocus (AF).

function: The

order

to

dial.

distance; turn towards + for a farther

panning handle.

1

1

/4-

/2

in.)

1

3

/2-

/4

in.)

ZR-2000.

these

4!

terminal

to

partially

camcorder

on

side of the

Press

it while recording to

make

manual focusing

00.

To get the

instructions

of a

local display

turn

off

on

a monitor or

PRESET

using the

ZR-2000.

outlines

Canon

lever.

the

of the

2.

Attaching the ZR-2000 to a tripod

1.

Unscrew and remove the tripod fitting.

2.

Affix to the tripod fitting the included non-slip rubber layer.

• This will prevent the ZR-2000 sliding on the panning handle.

3.

Position the tripod fitting on the panning handle and secure

it

in

place.

3.Attaching the optional Color Viewfinder Unit FU-2000

You can attach to the ZR-2000 the optional Color Viewfinder Unit FU-2000.

1.

Remove the protection cover from the FU-2000.

2.

Fit the FU-2000 into the attachment section of the remote controller.

3.

Tuck the remote controller's cable into the groove on the bottom part of the FU­2000 and turn the stopper to fix the cable in place.

• Do not attempt to disassemble

or

modify this unit.

• Do not subject this unit to strong vibrations or shocks.
in

• Do not leave the unit

in

a hot car, or

other hot places, as this may deform or discolor the unit.

• Do not insert the plug into

direct sunlight, near heat radiating objects, inside

any

jack

or

terminal

other

than the LANC

terminal of the camcorder.

• Keep the connection plug clean at all times.

This

device
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept
cause undesired operation.

Note:

This

digital device,
provide reasonable protection against harmful interference
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used
to radio communications.
However,
installation. If this equipment
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the

receiver

- Consult the dealer or an experienced radio
Do not make any changes or modifications to the equipment unless otherwise specified
in

the manual.

to stop operation of the equipment.

complies

equipment

pursuant

there

is

connected.

with Part 15 of the

any

interference

has

been

tested

to Part 15 of the FCC Rules.

in

accordance with the instructions, may cause harmful interference

is no

guarantee

does

that

cause harmful interference to radio or television

FCC

Rules.

received, including interference that

and

found

interference

to

comply

Operation

with

These

in

will

not

is

the

limits

limits are

a residential installation.

occur

subject

for

in a

I TV technician for help.

If

such changes or modifications should be made, you could be required

to the

may

a

Class

designed

particular

B

to

This digital apparatus does not exceed the Class B limits for radio noise emissions from
digital apparatus as set out
"Digital Apparatus. ICES-003 of the industry Canada."

Specifications

Plug:
LANC cable length: 3.3 m
Operating temperature range:
Dimensions (D
Weight: 153 g (5.4 oz.)

Weight and dimensions are approximate and subject to change without notice.
Errors and omissions excepted.

x W x H): 110 x 58 x 40 mm (4.3 x 2.3 x 1.6 in.)

in

the interference-causing equipment standard entitled

<P

2.5 mm stereo miniplug (LANC
(1

0.8 ft.)

0°-40°C

(32°-1 04 °F)

4!

Standard)