Canon Trimmer-A1 Operation Manual
Operation guide
Two-Knife Booklet
Trimmer-A1
Copyright
Copyright 2011-2013 by Canon Inc. All rights reserved.
No part of this publication may be reproduced or transmitted in any form or by any means,
electronic or mechanical, including photocopying and recording, or by any information storage or
retrieval system without the prior written permission of Canon Inc.
© 2011-2013, Océ
All rights reserved. No part of this work may be reproduced, copied, adapted, or transmitted in
any form or by any means without written permission from Océ.
Océ makes no representation or warranties with respect to the contents hereof and specifically
disclaims any implied warranties of merchantability or fitness for any particular purpose.
Furthermore, Océ reserves the right to revise this publication and to make changes from time to
time in the content hereof without obligation to notify any person of such revision or changes.
Edition 2013-06
US
Operation Guide Two-Knife Booklet Trimmer-A1: VarioPRINT (VP) 110, VP120, VP135 - Edition 2013-06
Contents
Chapter 1
Preface.................................................................................................................................5
Notes for the reader.........................................................................................................................................6
Naming conventions for accessories (generic naming in User Interfaces).................................................7
Chapter 2
Parts and their functions....................................................................................................9
Machine description.......................................................................................................................................10
Two-knife trim section...................................................................................................................................11
Conveyor section............................................................................................................................................12
Trim ejecting section......................................................................................................................................14
Chapter 3
Operating procedures.......................................................................................................17
Turn the trimmer on.......................................................................................................................................18
Operation while trimming.............................................................................................................................19
Remove the delivery tray...............................................................................................................................21
Install the delivery tray...................................................................................................................................22
Chapter 4
Troubleshooting................................................................................................................23
Error messages...............................................................................................................................................24
Overview of possible errors..........................................................................................................................25
Clear a paper jam...........................................................................................................................................27
Appendix A
Specifications....................................................................................................................29
Specifications..................................................................................................................................................30
Index...................................................................................................................................33
Contents
3
Canon Two-Knife Booklet Trimmer-A1
Operation Guide Two-Knife Booklet Trimmer-A1: VarioPRINT (VP) 110, VP120, VP135 - Edition 2013-06
Contents
4
Canon Two-Knife Booklet Trimmer-A1
Operation Guide Two-Knife Booklet Trimmer-A1: VarioPRINT (VP) 110, VP120, VP135 - Edition 2013-06
Chapter 1
Preface
Operation Guide Two-Knife Booklet Trimmer-A1: VarioPRINT (VP) 110, VP120, VP135 - Edition 2013-06
Notes for the reader
Introduction
This manual helps you to use the
Two-Knife Booklet Trimmer-A1. The manual contains a
description of the product and guidelines to use and operate the Two-Knife Booklet Trimmer-A1.
Definition
Attention-Getters
Parts of this manual require your special attention. These parts can provide the following:
• Additional general information, for example, information that is useful when you perform a
task.
•
Information to prevent personal injuries or property damage.
Symbols used in this manual
The following symbols are used in this manual to explain procedures, restrictions, handling
precautions, and instructions that should be observed for safety.
Overview of the attention-getters
Word Icon Indicates
WARNING
Indicates a warning concerning operations that may
lead to death or injury to persons if not performed
correctly. To use the machine safely, always pay attention to these warnings.
CAUTION
Indicates a caution concerning operations that may
lead to injury to persons if not performed correctly.
To use the machine safely, always pay attention to
these cautions.
IMPORTANT
Indicates operational requirements and restrictions.
Be sure to read these items carefully to operate the
machine correctly and to avoid damaging the machine or property.
NOTE
Indicates a clarification of an operation or contains
additional explanations for a procedure. Reading
these notes is highly recommended.
Indicates an operation that must not be performed.
Read these items carefully and make sure not to
perform the described operations.
Notes for the reader
6 Chapter 1 - Preface
Canon Two-Knife Booklet Trimmer-A1
Operation Guide Two-Knife Booklet Trimmer-A1: VarioPRINT (VP) 110, VP120, VP135 - Edition 2013-06
Naming conventions for accessories (generic naming in
User Interfaces)
Generic naming of accessories in User Interfaces
To improve the readability of texts in User Interfaces of operator panels and software, the
accessories are generally referred to by their function. The table below shows the naming
conventions for accessories (commercial product names and the generic terminology used in
User Interfaces).
NOTE
In some cases, there is only 1 name for more modules. The reason is that a configuration can
only contain 1 of the available types of modules.
Conversion table for commercial names versus generic terminology in User Interfaces
Commercial product name: In UI, printer driver and software referred to
as:
Finisher-AF1 and Finisher-AK1 [Stacker/stapler]
Saddle Finisher-AF2 and Saddle Finisher-AK2 [Stacker/stapler]
Puncher Unit-BP1/BQ1/BR1 and Puncher UnitBT1/BU1
[Puncher]
Professional Puncher-B1 [Puncher]
Paper Folding Unit-F1 [Folder]
Document Insertion Unit-F1 [Inserter]
High Capacity Stacker-E1 [Stacker]
High Capacity Stacker-F1 [Stacker]
Booklet Trimmer-D1 [Trimmer]
Two-Knife Booklet Trimmer-A1 [Trimmer]
Perfect Binder-C1 [Perfect Binder]
Duplex Color Image Reader Unit-D1 [Scanner]
NOTE
High Capacity Stacker-E1 and High Capacity Stacker-F1 cannot be combined.
Finisher-AF1/Saddle Finisher-AF2/Puncher Unit-BP1/BQ1/BR1 and Finisher-AK1/Saddle FinisherAK2/Puncher Unit-BT1/BU1 cannot be combined.
Naming conventions for accessories (generic naming in User Interfaces)
Chapter 1 - Preface 7
Canon Two-Knife Booklet Trimmer-A1
Operation Guide Two-Knife Booklet Trimmer-A1: VarioPRINT (VP) 110, VP120, VP135 - Edition 2013-06
Naming conventions for accessories (generic naming in User Interfaces)
8 Chapter 1 - Preface
Canon Two-Knife Booklet Trimmer-A1
Operation Guide Two-Knife Booklet Trimmer-A1: VarioPRINT (VP) 110, VP120, VP135 - Edition 2013-06
Chapter 2
Parts and their functions
Operation Guide Two-Knife Booklet Trimmer-A1: VarioPRINT (VP) 110, VP120, VP135 - Edition 2013-06
Machine description
Illustration
Main sections
Main sections
Section More information
1 Two-knife trim section
Two-knife trim section
on page 11
2 Conveyor section
Conveyor section
on page 12
3 Trim ejecting section
Trim ejecting section
on page 14
Machine description
10 Chapter 2 - Parts and their functions
Canon Two-Knife Booklet Trimmer-A1
Operation Guide Two-Knife Booklet Trimmer-A1: VarioPRINT (VP) 110, VP120, VP135 - Edition 2013-06
Two-knife trim section
Introduction
Each booklet delivered from the upstream trimmer is trimmed along it's top and bottom. Then
the booklet is delivered to the conveyor section.
[1] Two-knife trim section
Main parts
Main parts
Part Function
A Top cover The top cover gives access to the trimmer.
B Handle The handle lifts the booklet transport unit (TF2).
C Booklet transport unit (TF2) If a booklet jam occurs in the two-knife trim section, you
must press the handle and lift the booklet transport unit
(TF2) to remove the jammed booklets.
How to open the booklet transport unit (TF2):
1. Press the handle to the left.
2. Lift the booklet transport unit (TF2) up.
D Trim knives The knives trim the top and bottom of each booklet.
E Transport belts The transport belts move the booklets.
Two-knife trim section
Chapter 2 - Parts and their functions 11
Canon Two-Knife Booklet Trimmer-A1
Operation Guide Two-Knife Booklet Trimmer-A1: VarioPRINT (VP) 110, VP120, VP135 - Edition 2013-06
Loading...