Canon SELPHY CP, SELPHY DS User Manual

Direct Print User Guide

You don’t even need a computer !
Just connect your camera to your printer and print

CDI-E301-010 XXXXXX © 2006 CANON INC. PRINTED IN JAPAN
DPUG13

ENGLISH

Introduction

—

Confirm Your Printer Model and the Section that Applies to You

Operations differ according to your printer model.
According to the procedure below, confirm the section and page
you should read in this user guide.

Connect the camera to the printer with an appropriate cable
and confirm the icon displayed in the camera's LCD monitor.

• For instructions on camera and printer connection methods,
please refer to page 8.

Icons displayed in the camera's LCD monitor

Confirming the section that applies to you

• If one of the aforementioned icons does not appear, the connected printer
cannot be used.

• When the printer is ready for printing, the button lights in blue. The

button blinks during printing.

Depending on the camera model, the screens that will be
displayed will vary. Moreover, available settings differ depending
on the printer model and the paper size (unavailable settings will
not appear in the menu). For details, refer to the user guide that
came with your printer.

Confirm your printer
model.

Printer model

SELPHY CP
series

PIXMA/
SELPHY DS
series

Non-Canon
printers*

SELPHY CP
series

Bubble Jet
printers

* Please also refer to the user guide that came with your printer.

Read the page
below.

Refer to the sections indicated

Page 10

" Printing with SELPHY CP
Series Printers using
PictBridge"

Page 32

" Printing with Bubble Jet
Printers (PIXMA series/
SELPHY DS series) using
PictBridge"

Page 52

" Printing with Non-Canon,
PictBridge Compliant Printers"

Page 53

" Printing with SELPHY CP
Series Printers using Canon
Direct Print"

Page 71

" Printing with Bubble Jet
Printers using Bubble Jet
Direct"

1

For the latest information regarding connections between Canon
printers and cameras, please refer to the following URL:

http://web.canon.jp/Imaging/BeBit-e.html
http://www.canon.com/pictbridge/

PictBridge Compliance

This camera complies with the industry standard “PictBridge”*.
This allows you to also connect your camera to non-Canon
PictBridge compliant printers and print images with simple
operations using the camera buttons.

* PictBridge: PictBridge is an industry standard for direct printing that

allows you to print images without using a computer by directly
connecting digital cameras and digital camcorders (hereafter “camera”)
to a printer, regardless of the devices’ brand and model.

Disclaimer

• No part of this guide may be reproduced, transmitted, transcribed, stored
in a retrieval system, or translated into any language in any form, by any
means, without the prior written permission of Canon.

• Canon reserves the right to change the specifications of the hardware
described herein at any time without prior notice.

• While every effort has been made to ensure that the information contained
in this guide is accurate and complete, no liability can be accepted for any
errors or omissions.

• Canon makes no warranties for damages resulting from corrupted or lost
data due to a mistaken operation or malfunction of the camera, the
software, the memory cards, personal computers, peripheral devices, or
use of non-Canon memory cards.

Copyright © 2006 Canon Inc. All rights reserved.

2

Table of Contents

Direct Print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Allows for Printing without the Use of a Computer . . . . 6

Various Printing Operations Can Be Performed . . . . . . . 6

You Can Also Perform the Following Printing Operations . .7

Printing Movies (Movie Print) . . . . . . . . . . . . . . . . . . . . . . 7

Printing Multiple Images on a Sheet of Paper . . . . . . . . . 7

ID Photo Print. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Connecting the Camera to the Printer. . . . . . . . . . . . . . . . . 8

Disconnecting the Camera and the Printer . . . . . . . . . . . . . 9

Printing with SELPHY CP Series Printers using

PictBridge. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Easy Print. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Print after Changing the Print Settings. . . . . . . . . . . . . . 11

Selecting Print Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Setting the Date and the File Number Printing Option

Setting the Print Effect . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Setting the Number of Copies . . . . . . . . . . . . . . . . . . . . 14

Setting the Printing Area (Trimming) . . . . . . . . . . . . . . . 15

Selecting the Paper Settings . . . . . . . . . . . . . . . . . . . . . 19

Printing Multiple Images on a Sheet of Paper . . . . . . 21

Printing by Specifying the Print Size

(ID Photo Print) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Printing Images in the Fixed Size . . . . . . . . . . . . . . . 24

Printing Movies (Movie Print) . . . . . . . . . . . . . . . . . . . . . 25

Single-frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Sequence-frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Specifying and Printing Multiple Images

(Setting the DPOF Print Settings) . . . . . . . . . . . . . . . . . . 28

List of Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

. . . . 13

3

Printing with Bubble Jet Printers (PIXMA series/

SELPHY DS series) using PictBridge . . . . . . . . . . . . . . . . . 32

Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Easy Print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Print after Changing the Print Settings . . . . . . . . . . . . . .33

Selecting Print Settings. . . . . . . . . . . . . . . . . . . . . . . . . . .35

Setting the Date and the File Number Printing Option . .35

Setting the Print Effect. . . . . . . . . . . . . . . . . . . . . . . . . . .36

Setting the Number of Copies . . . . . . . . . . . . . . . . . . . . .37

Setting the Printing Area (Trimming) . . . . . . . . . . . . . . . .38

Selecting the Paper Settings . . . . . . . . . . . . . . . . . . . . . .42

Printing Multiple Images on a Sheet of Paper. . . . . . .44

Printing Movies (Movie Print) . . . . . . . . . . . . . . . . . . . . .46

Specifying and Printing Multiple Images

(Setting the DPOF Print Settings). . . . . . . . . . . . . . . . . . .47

List of Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

Printing with Non-Canon, PictBridge Compliant Printers

Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Printing with SELPHY CP Series Printers using

Canon Direct Print. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

If you use Canon Compact Photo Printer SELPHY

CP730/CP720/CP710/CP510 . . . . . . . . . . . . . . . . . . . . . . 53

Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

Easy Print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

Print after Changing the Print Settings . . . . . . . . . . . . . .54

Selecting Print Settings. . . . . . . . . . . . . . . . . . . . . . . . . . .55

Setting the Number of Copies . . . . . . . . . . . . . . . . . . . . .55

Setting the Print Style (Image, Borders and Date) . . . . .55

Setting the Printing Area (Trimming) . . . . . . . . . . . . . . . .57

Printing by Specifying the Print Size (ID Photo Print)

Printing Movies (Movie Print) . . . . . . . . . . . . . . . . . . . . .64

Single-frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64

Sequence-frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65

Specifying and Printing Multiple Images

(Setting the DPOF Print Settings). . . . . . . . . . . . . . . . . . .67

4

List of Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70

. . . 52

. . . . .61

Printing with Bubble Jet Printers using Bubble Jet Direct

Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Setting the Print Style . . . . . . . . . . . . . . . . . . . . . . . . . . 72

. .71

Settings that Can Be Set with the Camera . . . . . . . . . . . . . . . . . 74

SELPHY CP Series Printers using PictBridge . . . . . . 74

Bubble Jet Printers (PIXMA series/SELPHY DS series)
using PictBridge

SELPHY CP Series Printers using Canon Direct Print

Bubble Jet Printers using Bubble Jet Direct . . . . . . . 77

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

5

Direct Print

Allows for Printing without the Use of a Computer

Connect your camera to the printer with the appropriate cable.
Image selection and printing is operated from the camera.

Various Printing Operations Can Be Performed*

Prints to cover the entire
surface of the paper.
Or, prints with a border.

09/09/2006

Add the date.

Specify which portion of
the image to print.
(Trimming)

Multiple pictures can be printed at once. (DPOF print setting)

* Some settings may not be selectable for Non-Canon printers.

6

You Can Also Perform the Following Printing Operations

Printing Movies (Movie Print)

1"25

2"50

107-J006

6"25

12"50

18"75

• Capable printers
Single-frame: Canon SELPHY CP Series Printers, Printers using

3"75

7"50

8"75

10"00

13"75

15"00

16"25

20"00

21"25

22"50

Sequence-frame:Canon SELPHY CP Series Printers

Printing Multiple Images on a Sheet of Paper

Compositions of multiple images you specify
of the same dimensions can be printed on a
single sheet of paper (pp. 21, 44).

Moreover, the DPOF print setting* function
allows you to separately print different
images by specifying the number of frames
to be printed per image.

• Capable printers: Printers using PictBridge (Including non-Canon Printers)

ID Photo Print

You can print a single frame of movies or

5"00

extract movie frames at fairly regular intervals
and print them on a single sheet of paper

11"25

(pp. 25, 46, 64).

17"50

23"75

PictBridge (Including non-Canon printers)

(This function is not available on some printers.)

An image can be trimmed, laid out and printed
as ID photos (pp. 22, 61).

• Capable printers:Canon SELPHY CP Series
Printers

Depending on the printer model, additional printing operations are available
as follows:

• Printing images in a fixed size (p. 24)

• Printing images with the shooting information (p. 43)

* DPOF print settings

This function allows you to preset the images and the number of copies using
the camera button controls. The settings are recorded to a memory card.
Please refer to the Camera User Guide for instructions on setting procedure.
This guide explains how to print images with DPOF print settings.
DPOF=Digital Print Order Format

7

Connecting the Camera to the
Printer

Connect the camera to the printer. For instructions on printer and
camera operation methods, refer to their respective user guides.

Set one of the following into the camera.

• Compact power adapter (sold separately)

• Fully charged battery

• New batteries

Place paper, ink cassette/cartridge, etc. into the
printer.

Connect the camera to the printer with the
appropriate interface cable supplied with the camera.

DIGITAL terminal

Camera: Connect the cable to

the DIGITAL terminal.

Printer: Refer to the printer’s

user guide.

This illustration shows the PowerShot A710 IS as an example.

Some printers require specific connection cables which differ
from the above cable. Please refer to the printer’s user guide.

Turn the printer’s power on.

Set the camera to Playback mode and turn the
power on.

Depending on the camera model, the camera’s power will
automatically turn on when the printer’s power is turned on.

The following operations are not available during a camera/printer
connection.

• Language settings that use the SET button and the MENU button
(Depending on the camera model, use the SET button and the JUMP

8

button).

• Resetting the camera’s settings to default.

Disconnecting the Camera and the
Printer

Detach the cable from the printer.

Pull out the cable while holding the connector plug. Do not
pull out by the cable.

Turn the camera’s power off.

Detach the cable from the camera.

Pull out the cable while holding the connector plug. Do not
pull out by the cable.

9

Printing with SELPHY CP

Series Printers using

PictBridge

Printing

Easy Print

You can print images by pressing only one button after connecting
the camera to the printer.

Make sure that displays in
the upper left corner of the
LCD monitor.

1

Display the images you wish to print and press the

2

button.

If you wish to change the print settings, see Print after
Changing the Print Settings (p. 11).

10

Print after Changing the Print Settings

You can change the print settings before printing.

Make sure that displays in
the upper left corner of the
LCD monitor.

1

Sets the date
and the file number
for printing (p. 13)

Sets the print
effect (p. 14)

If displays on the LCD monitor,
please refer to Printing with

SELPHY CP Series Printers using
Canon Direct Print (p. 53).

Display the images you wish
to print and press the SET
button.

The print order screen appears.

2

Starts the printing process

Print Order Screen

Select print settings as needed.

3

Sets the number of copies (p. 14)
Sets the trimming portion (p. 15)

Sets the paper size, type and layout
(p. 19)

Select [Print] and press the SET button.

• The image will start to print and, when it is completely
finished, the display will revert to the standard playback

4

mode.

• If you press the MENU button, the display will revert to the
standard playback mode and printing will not take place.

11

• You cannot print RAW images.

• It may not be possible to play back or print images shot with a
different camera.

• You may not be able to print if the memory card holds a large
number of images (about 1000).

Cancel Printing

• To cancel printing between images, press the SET button.
A confirmation dialog will display. Select [OK] and press the
SET button. The printer will stop printing the current image and
eject the paper.

Printing Errors

• An error message appears if an error occurs for some reason
during the printing process. When the error is resolved, printing
will automatically resume. If printing does not resume, select
[Continue] and press the SET button. If [Continue] cannot be
selected, select [Stop], press the SET button and restart the
print job. See List of Messages (p. 31) for details.

12

Selecting Print Settings

Default Setting

• The Default option is a fixed setting of the printer.

• The [Date/File No.], [Print Effect], paper setting [Paper Size],
[Paper Type] and [Page Layout] options are available.

Setting the Date and the File Number Printing
Option

Select [ ], then select the
date and the file number
printing option.

You can set the date and the file
number printing as follows:

Date Prints only the date.

1

If you select an image which has had the shooting date embedded
in it using a camera with the Postcard Date Imprint mode, [ ] will
be set to [Off]. If you select [Date], [File No.] or [Both], the date/file
number will be printed on the embedded information which is also
printed.

File No. Prints only the file number.

Prints both the date and the

Both

file number.

Prints neither date nor file

Off

number.

Prints using the default

Default

setting.

13

Setting the Print Effect

This function uses the camera’s shooting information to optimize
the image data, yielding high quality prints. You can select the
following print effects.

On

Off Prints without any effects.

Default Print settings differ according to your printer model.

Uses the camera’s shooting information to deliver optimum
prints.

Select [ ] and choose a
print effect option.

1

Setting the Number of Copies

Select [ ] and set the
number of prints.

1 to 99 copies can be set.

1

14

Setting the Printing Area (Trimming)

You can specify a portion of the image for printing.
Please set [Paper Settings] (p. 19) before setting the trimming
settings. If [Paper Settings] is changed after having made the
trimming settings, you must select the settings again.

Select [Trimming] and press
the SET button.

The trimming frame will appear at
the center of the image. If a
trimming setting has already been
selected for the image, the frame
will appear around the previously
selected portion.

The trimming setting screen differs depending on the
camera model. Check which of the following screens
appear before selecting settings.

1

a b

Trimming Frame

Steps 2a and 3a

* Proceed to procedure or depending

on the display screen which appears.

a

Steps 2b and 3b

b

15

When screen displays

a

Trim the image.

Changing the Size of the Trimming Frame

• Press the zoom lever or the zoom button to adjust the size of
the trimming frame.

• The trimming frame can be changed to a minimum selection
of approximately half the displayed image (in width and
height) or a maximum selection that is virtually the same size
as the image.

• Expanding the trimming frame beyond its maximum size
cancels the trimming setting.

2a

• When printing an image that has been magnified using the
trimming option, the image quality may become coarser and
grainier depending on the level of magnification.

Moving the Trimming Frame

• Move the trimming frame using the omni selector or the up,
down, right and left buttons.

Rotating the Trimming Frame

• You can rotate the trimming frame by pressing the DISP. (or
DISPLAY) button.

Press the SET button to close the setting menu.

3a

Pressing the MENU button cancels the settings.

16

When screen displays

b

Trim the image.

Changing the Size of the Trimming Frame

• Press the up and down buttons to adjust the size of the
trimming frame.

• The trimming frame can be changed to a minimum selection
of approximately half the displayed image (in width and
height) or a maximum selection that is virtually the same size
as the image.

• Expanding the trimming frame beyond its maximum size
cancels the trimming setting.

• When printing an image that has been magnified using the

2b

trimming option, the image quality may become coarser and
grainier depending on the level of magnification.

Rotating the Trimming Frame

• You can rotate the trimming frame using the left and right
buttons.

Moving the Trimming Frame

• Press the SET button and use the up, down, right and left
buttons to move the trimming frame. Pressing the SET
button again allows you to change the size of the frame and
to rotate it.

Press the MENU button,
select [OK] and press the
SET button.

3b

Selecting [Cancel setting] cancels
the selected trimming setting. If
[Edit] is selected, the display
returns to the previous screen.

17

• The trimming setting only applies to one image.

• The trimming setting is canceled with the following operations.

• When you set the trimming settings for another image.

• When you close the Print mode (when you turn the camera
power off, change the camera mode, or detach the
connection cable).

• The shooting date or part of the date which has been
embedded in images using a camera with the Postcard Date
Imprint mode may not be printed properly depending on the
trimming setting.

• The paper size and page layout settings determine the shape of
the trimming frame.

• Please use the LCD monitor to set the trimming settings. The
trimming frame may not display correctly on a TV screen.

18

Selecting the Paper Settings

Select [Paper Settings] and
press the SET button.

The paper size setting screen

1

2

appears.

Select a paper size and press
the SET button.

The default settings and specified
paper cassette size are displayed.

The paper type setting screen
appears.

* Paper sizes vary according to region.

Press the SET button.

The page layout screen appears.

3

19

4

Select a layout.

The following layout can be
selected.

Default Print settings differ

Bordered Prints with a border.

Borderless Prints right to the edges

N-up Prints 2, 4 or (8*) images

ID Photo Specifies the print size

Fixed Size Prints by specifying the

* Card size paper only

according to your printer
model.

of the paper.

on a single sheet of paper
(p. 21)

and print portion of an
image or a whole image
as an ID photo (p. 22)

print size of the image on
a sheet of paper (p. 24).

20

Printing Multiple Images on a Sheet of Paper

Selecting [N-up] in the layout setting (p. 20) will allow you to
specify the following layout settings.

2 images (height 2 x width 1) of the same dimensions are

2

arranged on a single sheet of paper.

4 images (height 2 x width 2) of the same dimensions are

4

arranged on a single sheet of paper.

8 images (height 4 x width 2) of the same dimensions are

8*

arranged on a single sheet of paper or a label sheet.

* This option can only be selected when printing on card size paper.

[Printing example 1] Printing 3 copies of image A in 2-up

Number of
copies (p. 14)

Layout 2

DPOF print setting (p. 28) allows you to separately print different
images by specifying the number of frames to be printed per image.
[Printing example 2] Printing 2 copies of image A and 1 copy of image
B in 4-up

DPOF print
settings*
(p. 28)

Layout 4

Image A:
[3] copies

Image A:
[2] copies
Image B:
[1] copies

* Please refer to the Camera User Guide for instructions on DPOF print

setting method.

21

Printing by Specifying the Print Size (ID Photo Print)

T

Selecting [ID Photo] in the layout setting (p. 20) will allow you
to specify the print size and print portion of an image or a
whole image as an ID photo*.

* Images printed with the ID Photo Print function may not be allowed

as a formal certificate photo. Refer to the party (organization) or
administration requiring the photo.

The print size can be specified for only L (Large) resolution
images in the camera connected to the printer.

Select [ID Photo], then press
the SET button.

Specify the print size by
selecting the length of the
long side and the short side,
then press the SET button.

Specify the size by selecting the
length of the long side first, then
the short side. See the next table
for selectable combinations of the
long side length and the short side
length.

22

T

z Selectable combination

: Available print size

Short Side

20 mm 25 mm 30 mm 35 mm 40 mm 45 mm 50 m m
25 mm
30 mm
35 mm
40 mm
45 mm
50 mm
55 mm
60 mm

Long Side

70 mm

1.8 inch

2.0 inch

1.4 inch 1.5 inch 1.8 inch 2 .0 inch

Trim the image to specify the
print area.

See Step 2 of Setting the Printing
Area (Trimming) (pp. 16, 17) on

how to trim the image.

The trimming setting screen differs
depending on the camera model.

Trimming Frame

• The shape of the trimming frame varies depending on the
specified print size.

• Use the LCD monitor to specify the print size settings. The
trimming frame may not display correctly on a TV screen.

Follow the steps according to the
screen that displays on your
camera.

23

Printing Images in the Fixed Size

Selecting [Fixed Size] in the layout setting (p. 20) will allow
you to print by specifying the print size of the image on a
sheet of paper.

Select the fixed print size
required.

Depending on the paper size, you
can select print sizes as follows:

Paper size Print size

Credit Card You cannot select

9 × 13 cm
(L size)

10 × 14.8 cm
(Postcard size)

4 in. × 8 in./
10 × 20 cm
(Wide size)

the print size.

89 mm × 55 mm
Default

7 cm × 10 cm
Default

4 in. × 6 in.
7 cm × 10 cm
Default

Select a layout and press the SET button. This
ends the paper settings operations.

5

The display returns to the print order screen.

24

Printing Movies (Movie Print)

Select the movie you want to
print, then press the SET
button.

1

Single-frame

You can choose a single frame from a movie and print it on a sheet
of paper.

2

Movie Control Panel

The movie control panel appears.

Display the frame you wish
to print on the LCD monitor,
select (Print), then press
the SET button.

Refer to Viewing Movies section of
the Camera User Guide on how to
display the movie frame you wish
to print.

Select and choose
[Single].

3

Select and set the
number of prints.

1 to 99 copies can be set.

4

25

Select [Print] and press the SET button.

5

Sequence-frame

You can print movie frames selected automatically at fairly regular
intervals on a sheet of paper.

Select (Print) and press
the SET button.

2

Movie Control Panel

Select and choose
[Sequence].

3

If necessary, select [On],
[Off] or [Default] in
(Caption).

4

Select [Print] and press the SET button.

5

If you set (Caption) to [On], you
can print the file number and the
elapsed time of the frame at the
same time.

It may not be possible to play back or print movies shot with a
different camera.

26

• If you press the button instead of the SET button in Step
1, movie print begins.

• The number of printed movie frames per sheet of paper with
[Sequence] is determined by the paper size shown as follows:
(Depending on the number of seconds in the movie, there are
cases when the number of frames indicated below will not be
printed.)

• Card size: 20 frames

• L size: 42 frames

• Postcard size: 63 frames

• Wide size: 84 frames

• Selecting [Paper Settings] and pressing the SET button in Step
4 will allow [Paper Size], [Paper Type], and [Page Layout]
(excluding [ID Photo]) to be selected.
However, [Page Layout] cannot be set (p. 26) when [Sequence]
is selected.

27

Specifying and Printing Multiple Images
(Setting the DPOF Print Settings)

With the camera’s (Print) menu, you can specify and print
multiple images or all the images on a memory card. For
instructions on how to specify images, please refer to Setting the
DPOF Print Settings section of the Camera User Guide. In this
section, we will explain how to print images after specifying them.

In the (Print) menu, select
[Print] and press the SET
button.

• When an image or images have

1

2

3

been specified (see the Camera
User Guide), the button will

light up blue. At this time, if you
press the button, the
screen for Step 2 will be displayed.

Set the print effect and paper
settings as required.

Sets the Print Effect (p. 14)

Selects the Paper Settings* (p. 19)

* [Page Layout] cannot be set in the

[Paper Settings] when [Index] is
selected in the [Print Settings] option
in Step 1.

Select [Print] and press the
SET button.

• The image will start to print and,
when it is completely finished, the
display will revert to the standard
playback mode.

• If the MENU button is pressed,
the display will revert to the
screen in Step 1 and printing will
not take place.

28

• To print the date, set the [Date] setting in [Set up] on the screen
in Step 1 to [On]. You cannot set the date to print in Step 2.

• When the print type is set to [Index], the [Date] and [File No.]
cannot be printed at the same time.

• The ID photo print function cannot be used.

• You cannot print movies.

• The maximum number of images printed on one page in the
Index print type depends on the selected paper size.

• Card size: 20 images

• L size: 42 images

• Postcard size: 63 images

• Wide size: 84 images

29

Cancel Printing

• To cancel printing between images printed, press the SET

button. A confirmation dialog appears. Select [OK] and press
the SET button. The printer will stop printing the current image
and eject the paper.

Restarting Printing

• Select [Resume] and press the SET button. The remaining

images can be printed.

• Printing cannot be restarted under the following circumstances.

• If the print settings have been changed before restarting.

• If the image for which the print settings were set has been
deleted before restarting.

• If there is very little free space on the memory card when
printing is canceled, it may not be possible to restart printing.

• If printing is canceled because the camera battery is depleted, it
may not be possible to restart printing.
(Replace with a fully charged battery pack or new batteries,
then turn the camera power on again. If you intend to use an
extended period of time, you are recommended to power the
camera with a compact power adapter (sold separately).)

Printing Errors

• An error message appears if an error occurs for some reason
during the printing process. When the error is resolved, printing
will automatically resume. If printing does not resume, select
[Continue] and press the SET button. If [Continue] cannot be
selected, select [Stop], press the SET button and restart the
print job. See List of Messages (p. 31) for details.

30

List of Messages

The following messages may appear on the camera’s LCD monitor
when an error occurs during a camera and printer connection.
(Depending on the printer model, some messages may not
display.)
Please refer to the printer’s user guide for solutions.

No Paper

No Ink

Paper and ink do not
match

Paper Jam The paper jammed during printing.

Print output tray is
full

Paper Error The paper is not correctly set in the printer.

Cartridge not
compatible

Ink Error The ink cassette is experiencing a problem.

Recharge the printer
battery

Readjust trimming

Hardware Error

File Error

Print error

Paper cassette is incorrectly inserted or out of
paper. Or the paper feed is not operating correctly.

The ink cartridge has not been inserted or has run
out of ink.

The paper and ink are from different sets.

Remove paper from the print output tray.

Cartridge is not compatible.

The printer’s battery pack is depleted.

You attempted to print the image with a different
style than the one used when the trimming settings
were set.

Check whether or not an error other than a paper
or ink error has occurred.

You tried to print an image that is not compatible
with PictBridge. Some images that have been
recorded with another camera or modified using a
computer cannot be printed.

There is an error in the settings. Turn off the printer
and turn it on again, then set the print settings
correctly.

31

Printing with
Bubble Jet Printers
(PIXMA series/
SELPHY DS series)
using

Printing

Easy Print

You can print images by pressing only one button after connecting
the camera to the printer.

PictBridge

Make sure that displays in
the upper left corner of the
LCD monitor.

1

Display the images you wish to print and press the

2

button.

If you wish to change the print settings, see Print after
Changing the Print Settings (p. 33).

32

Print after Changing the Print Settings

You can change the print settings before printing.

Make sure that displays in
the upper left corner of the
LCD monitor.

1

Sets the print
effect (p. 36)

Sets the date and
the file number for
printing (p. 35)

If displays on the LCD monitor,
please refer to Printing with

Bubble Jet Printers using Bubble
Jet Direct (p. 71).

Display the images you wish
to print and press the SET
button.

The print order screen appears.

2

Starts the printing process

Print Order Screen

Select print settings as needed.

3

Sets the number of copies (p. 37)
Sets the trimming portion (p. 38)

Sets the paper size, type and layout
(p. 42)

Select [Print] and press the SET button.

• The image will start to print and, when it is completely
finished, the display will revert to the standard playback

4

mode.

• If you press the MENU button, the display will revert to the
standard playback mode and printing will not take place.

33

• You cannot print RAW images.

• It may not be possible to play back or print images shot with a
different camera.

• You may not be able to print if the memory card holds a large
number of images (about 1000).

Cancel Printing

• To cancel printing between images, press the SET button.
A confirmation dialog will display. Select [OK] and press the
SET button. The printer will stop printing the current image and
eject the paper.

Printing Errors

• An error message appears if an error occurs for some reason
during the printing process. When the error is resolved, printing
will automatically resume. If printing does not resume, select
[Continue] and press the SET button. If [Continue] cannot be
selected, select [Stop], press the SET button and restart the
print job. See List of Messages (p. 50) for details.

• On printers equipped with an operation panel, an error number
or message displays on the panel. Please refer to the printer
user guide for the remedies corresponding to the error numbers
or messages.

34

Selecting Print Settings

Default Setting

• The Default option is a fixed setting of the printer.

• The [Date/File No.], [Print Effect], paper setting [Paper Size],
[Paper Type] and [Page Layout] options are available.

• On printers equipped with an operation panel, you can change
the settings for those items set to [Default] using the printer's
operation panel.

Setting the Date and the File Number Printing Option

Select [ ], then select the
date and the file number
printing option.

You can set the date and the file
number printing as follows:

Date Prints the date.

1

File No. Prints only the file number.

Both

Off

Default

Prints both the date and
the file number.

Prints neither date nor file
number.

Prints using the default
setting.

35

If you select an image which has had the shooting date
embedded in it using a camera with the Postcard Date Imprint
mode, [ ] will be set to [Off]. If you select [Date], [File No.] or
[Both], the date/file number will be printed on the embedded
information which is also printed.

Setting the Print Effect

This function uses the camera’s shooting information to optimize
the image data, yielding high quality prints. You can select the
following print effects.

On

Off Prints without any effects.

Vivid

NR Prints with a noise reduction effect.

Vivid+NR Prints using both the [Vivid] and [NR] options.

Face

Red-Eye1 Prints with red-eye color corrected.

Red-Eye2 Prints using 3 setting; [Face], [Red-Eye], and [NR]

Default Print settings differ according to your printer model.

Uses the camera’s shooting information to deliver optimum
prints.

Prints more vibrant colors, such as the green of trees or the
blue of the sea or sky, than the [On] option.

Brightly prints a person’s face that has become dark because of
backlighting, etc.

Select [ ] and choose a
print effect option.

36

1

Setting the Number of Copies

Select [ ] and set the
number of prints.

1 to 99 copies can be set.

1

37

Setting the Printing Area (Trimming)

You can specify a portion of the image for printing.
Please set [Paper Settings] (p. 42) before setting the trimming
settings. If [Paper Settings] is changed after having made the
trimming settings, you must select the settings again.

Select [Trimming] and press
the SET button.

The trimming frame will appear at
the center of the image. If a
trimming setting has already been
selected for the image, the frame
will appear around the previously
selected portion.

The trimming setting screen differs depending on the
camera model. Check which of the following screens
appear before selecting settings.

1

a b

Trimming Frame

38

Steps 2a and 3a

* Proceed to procedure or depending

on the display screen which appears.

a

Steps 2b and 3b

b

When screen displays

a

Trim the image.

Changing the Size of the Trimming Frame

• Press the zoom lever or the zoom button to adjust the size of
the trimming frame.

• The trimming frame can be changed to a minimum selection
of approximately half the displayed image (in width and
height) or a maximum selection that is virtually the same size
as the image.

• Expanding the trimming frame beyond its maximum size
cancels the trimming setting.

2a

• When printing an image that has been magnified using the
trimming option, the image quality may become coarser and
grainier depending on the level of magnification.

Moving the Trimming Frame

• Move the trimming frame using the omni selector or the up,
down, right and left buttons.

Rotating the Trimming Frame

• You can rotate the trimming frame by pressing the DISP. (or
DISPLAY) button.

Press the SET button to close the setting menu.

3a

Pressing the MENU button cancels the settings.

39

When screen displays

b

Trim the image.

Changing the Size of the Trimming Frame

• Press the up and down buttons to adjust the size of the
trimming frame.

• The trimming frame can be changed to a minimum selection
of approximately half the displayed image (in width and
height) or a maximum selection that is virtually the same size
as the image.

• Expanding the trimming frame beyond its maximum size
cancels the trimming setting.

• When printing an image that has been magnified using the

2b

trimming option, the image quality may become coarser and
grainier depending on the level of magnification.

Rotating the Trimming Frame

• You can rotate the trimming frame using the left and right
buttons.

Moving the Trimming Frame

• Press the SET button and use the up, down, right and left
buttons to move the trimming frame. Pressing the SET
button again allows you to change the size of the frame and
to rotate it.

Press the MENU button,
select [OK] and press the
SET button.

3b

Selecting [Cancel setting] cancels
the selected trimming setting. If
[Edit] is selected, the display
returns to the previous screen.

40

• The trimming setting only applies to one image.

• The trimming setting is canceled with the following operations.

• When you set the trimming settings for another image.

• When you close the Print mode (when you turn the camera
power off, change the camera mode, or detach the
connection cable).

• The shooting date or part of the date which has been
embedded in images using a camera with the Postcard Date
Imprint mode may not be printed properly depending on the
trimming setting.

• The paper size and page layout settings determine the shape of
the trimming frame.

• Please use the LCD monitor to set the trimming settings. The
trimming frame may not display correctly on a TV screen.

41

Selecting the Paper Settings

Select [Paper Settings] and
press the SET button.

The paper size setting screen

1

2

3

appears.

Select a paper size and press
the SET button.

The following paper sizes* are
available: 4" u 6", 5" u 7",
13 u 18 cm, 8.5" u 11", A4,
CreditCard, 8" u 10", 10" u 12", A3,
A3+/13" u 19", 14" u 17", 4" u 7.1"
and Default.
The paper type setting screen
appears.

* Paper sizes vary according to region.

Select a paper type and
press the SET button.

The following paper types are
available: Photo, Fast Photo, Fine
Art, Semi-gloss, Plain and Default.
Please refer to the printer user
guide for the kind of paper that may
be used for each paper type
setting.

The Page Layout screen appears.

42

4

Select a layout.

The following layout can be
selected.

Bordered Prints with a border.
Borderless Prints right to the edges

N-up*

Bordered

20-up

35-up

Default Print settings differ

*1Appears only when using the auto

sheet feeder and you select [4" × 6"]
in [Paper Size].

2

Prints the camera name, shooting

*

mode, shutter speed, aperture value,
exposure compensation, ISO speed,
etc., from the Exif information.

of the paper.

1

Prints 2, 4, 9 or 16
images on a single sheet
of paper (p. 44)

Prints the shooting
information*
blank sheet of paper
(size L or larger).

Prints images with DPOF
print setting at 20-up or
35-up, scaled down to A4
size paper. For [20-up ],
the shooting information*
will be printed next to the
image.

according to your printer
model.

2

onto a

2

43

Printing Multiple Images on a Sheet of Paper

• Selecting [4" x 6"] in the paper size setting (p. 42) will allow
you to specify the following layout settings.

2 images (height 2 x width 1) of the same

2

dimensions are arranged on a single sheet of paper.

4 images (height 2 x width 2) of the same

4

dimensions are arranged on a single sheet of paper.

9 images (height 3 x width 3) of the same

9

dimensions are arranged on a single sheet of paper.

16 images (height 4 x width 4) of the same

16

dimensions are arranged on a single sheet of paper.

[Printing example 1] Printing 3 copies of image A in 2-up

Number of
copies (p. 37)

Layout 2

DPOF print setting (p. 47) allows you to separately print different
images by specifying the number of frames to be printed per image.
[Printing example 2] Printing 3 copies of image A and 2 copies of
image B in 9-up

DPOF print
settings*
(p. 47)

Layout 9

Image A:
[3] copies

Image A:
[3] copies
Image B:
[2] copies

44

* Please refer to the Camera User Guide for instructions on DPOF print

setting methods.

Select a layout and press the SET button. This
ends the paper settings operations.

5

The display returns to the print order screen.

• Images will print with borders, even if [Borderless] was selected
with the camera in the following cases:

•When [Plain] is selected in the camera's [Paper Type] (cannot be

selected depending on the connected printer model)

•With printers equipped with an operation panel, when [Plain] is selected

with the printer and [Default] is selected in the camera's [Paper Type].

45

Printing Movies (Movie Print)

You can choose a single frame from a movie and print it on a sheet
of paper.

Select the movie you want to
print, then press the SET
button.

1

2

Movie Control Panel

The movie control panel appears.

Display the frame you wish
to print on the LCD monitor,
select (Print), then press
the SET button.

Refer to Viewing Movies section of the
Camera User Guide on how to display

the movie frame you wish to print.

Select and set the
number of prints.

1 to 99 copies can be set.

3

Select [Print] and press the SET button.

4

It may not be possible to play back or print movies shot with a
different camera.

• If you press the button instead of the

movie print begins.

• Selecting [Paper Settings] and pressing the

allow [Paper Size], [Paper Type] and [Page Layout] to be selected.

SET

button in Step 1,

SET

button in Step 3 will

46

Specifying and Printing Multiple Images
(Setting the DPOF Print Settings)

With the camera’s (Print) menu, you can specify and print
multiple images or all the images on a memory card. For
instructions on how to specify images, please refer to Setting the
DPOF Print Settings section of the Camera User Guide. In this
section, we will explain how to print images after specifying them.

In the (Print) menu, select
[Print] and press the SET
button.

• When an image or images have

1

2

3

been specified (see the Camera
User Guide), the button will

light up blue. At this time, if you
press the button, the
screen for Step 2 will be displayed.

Set the print effect and paper
settings as required.

Sets the Print Effect (p. 36)

Selects the Paper Settings* (p. 42)

* [Page Layout] cannot be set in the

[Paper Settings] when [Index] is
selected in the [Print Settings] option
in Step 1. The A3 and A3+/13" × 19"
paper sizes cannot be selected,
either.

Select [Print] and press the
SET button.

• The image will start to print and,
when it is completely finished, the
display will revert to the standard
playback mode.

• If the MENU button is pressed,
the display will revert to the
screen in Step 1 and printing will
not take place.

47

• To print the date, set the [Date] setting in [Print Settings] on the
screen in Step 1 to [On]. You cannot set the date in Step 2.

• When the print type is set to [Index], both the [Date] and [File
No.] cannot be printed depending on the printer.

• When the print type is set to [Standard], the [File No.] cannot be
printed.

• You cannot print movies.

48

Cancel Printing

• Press the SET button to cancel while printing. A confirmation

dialog appears. Select [OK] and press the SET button. The
printer will stop printing the current image and eject the paper.

Restarting Printing

• Select [Resume] and press the SET button. The remaining

images can be printed.

• Printing cannot be restarted under the following circumstances.

• If the print settings have been changed before restarting.

• If the image for which the print settings were set has been
deleted before restarting.

• If there is very little free space on the memory card when
printing is canceled, it may not be possible to restart printing.

• If printing is canceled because the camera battery is depleted, it
may not be possible to restart printing.
(Replace with a fully charged battery pack or new batteries,
then turn the camera power on again. If you intend to use an
extended period of time, you are recommended to power the
camera with a compact power adapter (sold separately).)

Printing Errors

• An error message appears if an error occurs for some reason
during the printing process. When the error is resolved, printing
will automatically resume. If printing does not resume, select
[Continue] and press the SET button. If [Continue] cannot be
selected, select [Stop], press the SET button and restart the
print job. See List of Messages (p. 50) for details.

• On printers equipped with an operation panel, an error number
or message displays on the panel. Please refer to the printer
user guide for the remedies corresponding to the error numbers
or messages.

49

List of Messages

The following messages may appear on the camera LCD monitor if
an error occurs during a camera and printer connection.
(Depending on the printer, some messages may not appear.)

• Please refer to the printer’s user guide for the appropriate
remedies.

: Printing restarts if you select [Continue] and press the SET

button. For the remedies to other messages that might
appear, refer to your printer’s user guide.

No Paper There is no paper set in the printer.

Paper Jam

Paper Error

No Ink

Low ink level

Ink absorber full

Ink Error

The paper jammed during printing. Select [Stop] to
cancel printing. Remove the jammed paper, reset
some other paper in the printer, then print again.

Either the paper is not set correctly in the printer, or
the size of the paper is wrong. Also open the paper
output tray if it is closed.

The ink tank has run out of ink or there is no ink
tank in the printer. The number of times that the
printer’s error lamp blinks, and the error message
displayed, will indicate the appropriate remedy for
the error. Please refer to the printer’s user guide for
the remedy.

The ink tank needs to be replaced soon. Prepare a
new ink tank. If you select [Continue] in the error
screen, you can restart printing.

You can restart printing if you select [Continue] in
the error screen. Please request replacement of the
ink absorber from your nearest Canon Customer
Support center listed in the contact list provided
with the printer or in the user guide. The ink
absorber cannot be replaced by the user.

There is a problem with the ink. If the printer’s error
lamp is blinking and an error message is displayed,
please refer to the printer’s user guide to ascertain
the problem and its remedy.

50

Disconnect the cable from the printer and turn off
the printer power. Then reconnect the cable and

Printer error

Printer in use

Paper lever error

Printer cover open Close the printer cover securely.

No print head

Hardware Error

File Error

Incompatible paper
size

Print error

Check print
settings

turn on the printer. If the error persists, please
request a repair from your nearest Canon Customer
Support Center (listed in the contact list provided
with the printer).

The printer is in use now. The printer automatically
starts printing the images from the camera after
completing the current printing.

Adjust the paper thickness lever to the proper
position.

If the printer’s error lamp is blinking and an error
message is displayed, please refer to the printer’s
user guide to ascertain the problem and its remedy.

If the printer’s error lamp is blinking and an error
message is displayed, please refer to the printer’s
user guide to ascertain the problem and its remedy.

You tried to print an image that is not compatible
with PictBridge. Some images that have been
recorded with another camera or modified using a
computer cannot be printed.

Paper of a different size than the specified paper
size is set to the printer. Select [Continue] on the
error screen to display the paper size setting
screen. Correct the paper size using the screen
(only the selectable paper sizes appear on the
screen).

Check that the correct paper size is selected. If this
error message appears even when the correct
paper size is set, turn off the printer, then turn it on
again. If the error persists, please request a repair
from your nearest Canon Customer Support Center
(listed in the contact list provided with the printer).

Unprintable settings are included. Select [Continue]
on the error screen to display the print order screen.
Check the print settings (only the printable settings
appear on the screen), change the settings if
necessary, then print again.

51

Printing with Non-Canon,

PictBridge

Printing

Compliant Printers

Make sure that displays in
the upper left corner of the
LCD monitor.

1

After this step, follow the procedures in the section Printing with
Bubble Jet Printers (PIXMA series/ SELPHY DS series) using
PictBridge (p. 32) to print your images.

However, the following menu options cannot be set.

• Print Effect (p. 36):[Vivid], [NR], [Vivid+NR], [Face ], [Red-
Eye1], [Red-Eye2]

• Paper Size (p. 42):[A3+/13" × 19"] and [5" × 7"/13 ×18cm]

Please also refer to the user guide that came with your printer.

52

Printing with SELPHY

CP Series Printers using

Canon Direct Print

If you use Canon Compact Photo Printer
SELPHY CP730/CP720/CP710/CP510

When printing, on wide-size paper, an image that has been shot
using a Canon digital camera’s (wide) size, select from
[Print Method] on the camera’s (Set up) menu.
After this, see Printing with SELPHY CP Series Printers using
PictBridge (p. 10).

Printing

Easy Print

You can print images by pressing only one button after connecting
the camera to the printer.

Make sure that displays in
the upper left corner of the
LCD monitor.

1

Display the images you wish to print and press the

2

button.

If you wish to change the print settings, see Print after
Changing the Print Settings below.

53

Print after Changing the Print Settings

You can change the print settings before printing.

Make sure that displays in
the upper left corner of the
LCD monitor.

1

Selects the Number of
Copies (p. 55)

If displays on the LCD monitor,
please refer to Printing with

SELPHY CP Series Printers using
PictBridge (p. 10).

Display the images you wish
to print and press the SET
button.

The print order screen appears.

2

Sets the Print Style (p. 55)

Sets the Printing Area (Trimming)

Print Order Screen

Select print settings as required.

3

Select [Print] and press the SET button.

If you press the MENU button, the display will revert to the

4

standard playback mode and printing will not take place.

• You cannot print RAW images.

• It may not be possible to play back or print images shot with a
different camera.

54

(p. 57)

Cancel Printing

• You cannot stop printing when printing only one copy of an
image. If you are printing more than one copy or more than one
image, you can cancel the rest of the printing by pressing the
SET button. Once the current print is finished, a confirmation
dialog appears. Select [OK] and press the SET button.

Printing Errors

• An error message appears if an error occurs for some reason
during the printing process. Select [Stop] or [Resume] and
press the SET button. See List of Messages (p. 70) for details.
The [Resume] option may not appear with some types of errors.
In that case, select [Stop].

Selecting Print Settings

Setting the Number of Copies

In the print order screen, select [ ] and set the
number of prints.

1

1 to 99 copies can be set.

Setting the Print Style (Image, Borders and Date)

You can select from among the following print styles.

Standard Prints one image per page.

Image

Borders

Date

* This option can only be selected when printing on card size paper.

Multiple*

ID Photo Prints a specified print size (p. 61).

Borderless Prints right to the edges of the paper.

Bordered Prints with a border.

On Adds the date to the print.

Off Prints without the date.

Prints eight copies of the same
image on one page.

55

In the print order screen, select [Style] and press

1

the SET button.

Select [Image], [Borders], or
[Date].

2

Select settings as needed.

3

Press the MENU button to
end the setting selection
process.

With borderless or multiple prints,
the top, bottom and sides of the

4

Print Area Frame

image may be cropped slightly. If
you have not specified a trimming
setting, a frame will appear around
the area of the image that will be
printed, allowing you to check the
portion that will be cropped.

If you select an image which has had the shooting date
embedded in it using a camera with the Postcard Date Imprint
mode, [Date] in the [Style] menu will be set to [Off]. If you set
[Date] to [On], dates will appear twice on the printed image.

56

• When printing multiple prints, the [Borders] and the [Date]
cannot be set. (Images are printed without any date or borders.)

• Practically all of the image area displayed on the LCD monitor is
printed on bordered prints.

Setting the Printing Area (Trimming)

You can specify which portion of an image gets printed.
Please set the Print Style (Image, Borders and Date) before setting
the trimming settings. If the print style is changed after having
made the trimming settings, you must select the settings again.

In the print order screen,
select [Trimming] and press
the SET button.

The trimming frame will appear at
the center of the image. If a
trimming setting has already been
selected for the image, the frame
will appear around the previously
selected portion.

The trimming setting screen differs depending on the
camera model. Check which of the following screens
appear before selecting settings.

1

a b

Trimming Frame

Steps 2a and 3a

* Proceed to procedure or depending

on the display screen which appears.

a

Steps 2b and 3b

b

57

When screen displays

a

Trim the image.

Changing the Size of the Trimming Frame

• Press the zoom lever or the zoom button to adjust the size of
the trimming frame.

• The trimming frame can be changed to a minimum selection
of approximately half the displayed image (in width and
height) or a maximum selection that is virtually the same size
as the image.

• Expanding the trimming frame beyond its maximum size
cancels the trimming setting.

2a

• When printing an image that has been magnified using the
trimming option, the image quality may become coarser and
grainier depending on the level of magnification. If this
happens, the trimming frame displays in red.

Moving the Trimming Frame

• Move the trimming frame using the omni selector or the up,
down, right and left buttons.

Rotating the Trimming Frame

• You can rotate the trimming frame by pressing the DISP. (or
DISPLAY) button.

Press the SET button to close the setting menu.

3a

Pressing the MENU button cancels the settings.

58

When screen displays

b

Trim the image.

Changing the Size of the Trimming Frame

• Press the up and down buttons to adjust the size of the
trimming frame.

• The trimming frame can be changed to a minimum selection
of approximately half the displayed image (in width and
height) or a maximum selection that is virtually the same size
as the image.

• Expanding the trimming frame beyond its maximum size
cancels the trimming setting.

• When printing an image that has been magnified using the

2b

trimming option, the image quality may become coarser and
grainier depending on the level of magnification. If this
happens, the trimming frame displays in red.

Rotating the Trimming Frame

• You can rotate the trimming frame using the left and right
buttons.

Moving the Trimming Frame

• Press the SET button and use the up, down, right and left
buttons to move the trimming frame. Pressing the SET
button again allows you to change the size of the frame and
to rotate it.

Press the MENU button,
select [OK] and press the
SET button.

3b

Selecting [Cancel setting] cancels
the selected trimming setting. If
[Edit] is selected, the display
returns to the previous screen.

59

• The trimming setting only applies to one image.

• The trimming setting is canceled with the following operations.

• When you set the trimming settings for another image.

• When you close the Print mode (when you turn the camera
power off, change the camera mode, or detach the
connection cable).

• The shooting date or part of the date which has been
embedded in images using a camera with the Postcard Date
Imprint mode may not be printed properly depending on the
trimming setting.

• The selected image and border settings determine the shape of
the trimming frame.

• Please use the LCD monitor to set the trimming settings. The
trimming frame may not display correctly on a TV screen.

60

Printing by Specifying the Print Size (ID Photo
Print)

You can specify the print size and print portion of an image or a
whole image as an ID photo*.

* Images printed with the ID Photo Print function may not be allowed as a

formal certificate photo. Refer to the party (organization) or administration
requiring the photo.

The print size can be specified for only L (Large) resolution
images in the camera connected to the printer.

In the print order screen,
select [Style] and press the
SET button.

1

Select [Image], then select
[ID Photo]. Specify the print
size by selecting the length
of the long side and the short
side, then press the SET

2

button.

Specify the size by selecting the
length of the long side first, then
the short side. See the next table
for selectable combinations of the
long side length and the short side
length.

61

z Selectable combination

: Available print size

Short Side

Long Side

20 mm 25 mm 30 mm 35 mm 40 mm 45 mm 50 mm
25 mm
30 mm
35 mm
40 mm
45 mm
50 mm
55 mm
60 mm
70 mm

1.8 inch

2.0 inch

1.4 inch 1.5 inch 1.8 inch 2.0 inch

Trim the image to specify the
print area.

See Step 2 of Setting the Printing
Area (Trimming) (pp. 58, 59) on

how to trim the image.

3

The trimming setting screen differs
depending on the camera model.

Trimming Frame

Press the SET button to close the setting menu.

4

Follow the steps according to the
screen that displays on your
camera.

62

• The print size setting only applies to one image.

• The print size setting is canceled with the following operations:

• When you set the print size settings for another image.

• When you close the Print mode (when you turn the camera
power off, change the camera mode, or detach the
connection cable).

• The shape of the trimming frame varies depending on the
specified print size.

• Use the LCD monitor to specify the print size settings. The
trimming frame may not display correctly on a TV screen.

63

Printing Movies (Movie Print)

Select the movie you want to
print, then press the SET
button.

1

Single-frame

You can choose a single frame from a movie and print it on a sheet
of paper.

2

Movie Control Panel

The movie control panel appears.

Display the frame you wish
to print on the LCD monitor,
select (Print), then press
the SET button.

Refer to Viewing Movies section of
the Camera User Guide on how to
display the movie frame you wish
to print.

Select and choose
[Single].

3

64

Select and set the
number of prints.

1 to 99 copies can be set.

4

Select [Print] and press the SET button.

5

Sequence-frame

You can print movie frames selected automatically at fairly regular
intervals on a sheet of paper.

Select (Print) and press
the SET button.

2

Movie Control Panel

Select and choose
[Sequence].

3

If necessary, select [On] or
[Off] in (Caption).

If you set (Caption) to [On], you

4

can print the file number and the
elapsed time of the frame at the
same time.

Select [Print] and press the SET button.

5

It may not be possible to play back or print movies shot with a
different camera.

65

• If you press the button instead of the SET button in Step

1, movie print begins.

• The number of printed movie frames per sheet of paper with

[Sequence] is determined by the paper size shown as follows:
(Depending on the number of seconds in the movie, there are
cases when the number of frames indicated below will not be
printed.)

• Card size: 20 frames

• L size: 42 frames

• Postcard size: 63 frames

• Wide size: 63 frames

• Selecting [Style] and pressing the SET button in Step 4 will

allow [Image] (excluding [ID Photo]) and [Borders] to be
selected.
However, [Style] cannot be set (p. 65) when [Sequence] is
selected.

66

Specifying and Printing Multiple Images
(Setting the DPOF Print Settings)

With the camera’s (Print) menu, you can specify and print
multiple images or all the images on a memory card. For
instructions on how to specify images, please refer to Setting the
DPOF Print Settings section of the Camera User Guide. In this
section, we will explain how to print images after specifying them.

In the (Print) menu, select
[Print] and press the SET
button.

• When an image or images have

1

2

3

been specified (see the Camera
User Guide), the button will

light up blue. At this time, if you
press the button, the
screen for Step 2 will be displayed.

Set the print style settings as
required.

•See Setting the Print Style
(Image, Borders and Date)

(p. 55).

• A print style cannot be set if [Print
Settings] on the screen in Step 1
is set to [Index].

Select [Print] and press the
SET button.

• The image will start to print and,
when it is completely finished, the
display will revert to the standard
playback mode.

• If the MENU button is pressed,
the display will revert to the
screen in Step 1 and printing will
not take place.

67

• To print the date, set the [Date] setting in [Set up] on the screen
in Step 1 to [On]. You cannot set the date to print with the
[Style] menu in Step 2.

• When the print type is set to [Index], the [Date] cannot be
printed.

• When the print type is set to [Standard], the [File No.] cannot be
printed.

• The ID photo print function cannot be used.

• The maximum number of images printed on one page in the
Index print type depends on the selected paper size.

• Card size: 20 images

• L size: 42 images

• Postcard size: 63 images

• Wide size: 63 images

Cancel Printing

• To cancel printing between images printed, press the SET
button.
Once the current print is completed, a confirmation dialog
appears. Select [OK] and press the SET button.

Restarting Printing

• Select [Resume] and press the SET button. The remaining
images can be printed.

• Printing cannot be restarted under the following circumstances.

• If the print settings have been changed before restarting.

• If the image for which the print settings were set has been
deleted before restarting.

• If there is very little free space on the memory card when
printing is canceled, it may not be possible to restart printing.

• If printing is canceled because the camera battery is depleted, it
may not be possible to restart printing.
(Replace with a fully charged battery pack or new batteries,
then turn the camera power on again. If you intend to use an
extended period of time, you are recommended to power the
camera with a compact power adapter (sold separately).)

68

Printing Errors

• An error message appears if an error occurs for some reason
during the printing process. Select [Stop] or [Resume] and
press the SET button.

* The [Resume] option may not appear with some types of

errors. In that case, select [Stop].

69

List of Messages

The following messages may appear on the camera’s LCD monitor
when an error occurs during a camera and printer connection.
(Depending on the printer model, some messages may not
display.)

• Please refer to the printer’s user guide for solutions.

No Paper

No Ink

Incompatible paper
size

Incompatible ink
size

Ink Cassette Error The ink cassette is experiencing a problem.

Paper and ink do not
match

Paper Jam The paper jammed during printing.

Paper has been
changed

Recharge the printer
battery

Communication
Error

Readjust trimming

Cannot Print!

Could not print xx
images

70

Paper cassette is incorrectly inserted or out of
paper. Or the paper feed is not operating correctly.

The ink cartridge has not been inserted or has run
out of ink.

Wrong paper size is loaded in the printer.

Wrong ink cassette size is loaded in the printer.

The paper and ink are from different sets.

Paper was changed after the print style was
displayed.

The printer’s battery pack is depleted.

The printer is experiencing a data transmission
error.

You attempted to print the image with a different
style than the one used when the trimming settings
were set.

You attempted to print an image that was
photographed with another camera, one recorded
in a different data type, or one that has been edited
on a computer.

You attempted to use the DPOF print settings to
print xx images that were photographed with
another camera, that have been recorded in a
different data type, or that have been edited on a
computer.

Printing with Bubble

Jet Printers using

Bubble

Jet Direct

Printing

Make sure that displays in
the upper left corner of the
LCD monitor.

1

After this step, follow the procedures in the section Printing with
SELPHY CP Series Printers using Canon Direct Print (p. 53) to

print your images.

However, please note that some menus and precautions
differ, as listed below.

See pages 54 and 68.

• You cannot print movies or RAW images.

If displays, refer to Printing

with Bubble Jet Printers (PIXMA
series/ SELPHY DS series) using
PictBridge (p. 32).

71

Cancel Printing

• To cancel printing between images printed, press the SET

button. A confirmation dialog appears. Select [OK] and press
the SET button.
The printer will stop printing the current image and eject the
paper.

Printing Errors

• An error message appears if an error occurs for some reason

during the printing process. When the error is resolved, printing
will automatically resume. If printing does not resume, select
[Continue] and press the SET button. If [Continue] cannot be
selected, select [Stop], press the SET button and restart the
print job.

• With printers equipped with an operation panel, the error

number displays on the panel. Please refer to the printer user
guide for the remedies corresponding to the error numbers.

See page 55.

Setting the Print Style

You can select from among the following print styles.

Select the paper size from the following:

Paper

Borders

Date

Borderless Prints right to the edges of the paper.

Bordered Prints with a border.

On Adds the date to the print.

Off Prints without the date.

[Card #1], [Card #2], [Card #3], [LTR] or [A4].
For usable paper types, please refer to the
printer user guide.

72

• The ID photo print function cannot be used.

• If you select an image which has had the shooting date
embedded in it using a camera with the Postcard Date Imprint
mode, [Date] in the [Style] menu will be set to [Off]. If you set
[Date] to [On], dates will appear twice on the printed image.

See page 68.

• To print the date, set the [Date] setting in [Set up] on the screen
in Step 1 to [On]. You cannot set the date to print with the
[Style] menu in Step 2.

• When the print type is set to [Index], the [Date] and [File No.]
cannot be printed at the same time.

• When the print type is set to [Standard], the [File No.] cannot be
printed.

• The ID photo print function cannot be used.

73

Settings that Can Be Set with the
Camera

SELPHY CP Series Printers using

PictBridge

(When appears on the camera’s LCD monitor during a
connection)

Print Options Selectable with the Camera

Date

File No.

Date/File No.

Print Effect

Number of Prints 1 to 99

Trimming

Paper Settings

Movies
(Movie Print)

* This option can only be selected when [CreditCard] size paper is set.

74

Both

Off

Default

Off

On

Default

Paper Size

Page Layout

Single

Sequence

CreditCard

9 × 13 cm

10 × 14.8 cm

4" × 8" or 10 × 20 cm

Default

Bordered

Borderless

N-up 2/4/(8*)

ID Photo

Fixed Size

Default

Bubble Jet Printers (PIXMA series/

SELPHY DS series) using PictBridge

(When appears on the camera’s LCD monitor during a
connection)

Print Options Selectable with the Camera

Date

File No.

Date

Print Effect

Number of Prints 1 to 99

Trimming

Movies (Movie Print)

Both

Off

Default

Off

On

Vivid

NR

Vivid+NR

Face

Red-Eye1

Red-Eye2

Default

75

4" u 6"

13 u 18 cm

5" u 7"

A4

8.5" u 11"

CreditCard

1

Paper Size*

8" u 10"

10" u 12"

A3

A3+/13" u 19"

14" u 17"

4" u 7.1"

Default

Paper Settings

Photo

Fast Photo

Paper Type

Fine Art

Semi-gloss

Plain

Default

Bordered

Borderless

2

N-up*

Page Layout

Bordered (print with the
shooting information)

20-up (print with the shooting
information)

35-up

Default

*1Paper sizes vary according to region.

2

*

This option can be specified by selecting [4" x 6"] in [Paper Size].

2/4/9/16

76

SELPHY CP Series Printers using Canon Direct Print
Bubble Jet Printers using Bubble Jet Direct

(When or appears on the camera’s LCD monitor during a
connection)

SELPHY

CP series

Print Options Selectable with the Camera

Number of Prints 1 to 99 {{

1 image { –

Image

Multiple {*

ID Photo { –

Card #1, Card #2,

Paper

Style

Trimming {{

Movies
(Movie Print)

*1This option can only be selected when [CreditCard] size paper is set.

2

*

Paper size will be set automatically according to the paper cassette set to
the printer.

Card #3, Letter (LTR)
or A4

Bordered {{

Borders

Borderless {{

Date {{

Single { –

Sequence { –

Printers

using

Canon

Direct Print

–*

1

2

Bubble Jet

Printers

using

Bubble Jet

Direct

–

{

77

MEMO

78

MEMO

79

MEMO

80