Page 1
Direct Print User Guide
You don’t even need a computer !
Just connect your camera to your printer and print
CDI-E283-010 XXXXXXX © 2007 CANON INC. PRINTED IN JAPAN
DPUG14
Page 2
ENGLISH
Introduction
—
Confirm Your Printer Model and the Section that Applies to You
Operations differ according to your printer model.
According to the procedure below, confirm the section and page
you should read in this user guide.
Connect the camera to the printer with an appropriate cable
and confirm the icon displayed in the camera's LCD monitor.
• For instructions on camera and printer connection methods,
please refer to page 8.
Icons displayed in the camera's LCD monitor
Confirming the section that applies to you
• If one of the aforementioned icons does not appear, the connected printer
cannot be used.
• When the printer is ready for printing, the button lights in blue. The
button blinks during printing.
Page 3
Depending on the camera model, the screens that will be
displayed will vary. Moreover, available settings differ depending
on the printer model and the paper size (unavailable settings will
not appear in the menu). For details, refer to the user guide that
came with your printer.
Confirm your printer
model.
Printer model
SELPHY ES/
SELPHY CP
Series
PIXMA/
SELPHY DS
Series
Non-Canon
Printers*
SELPHY CP
Series
Bubble Jet
Printers
* Please also refer to the user guide that came with your printer.
Read the page
below.
Refer to the sections indicated
Page 10
" Printing with SELPHY ES
Series/SELPHY CP Series
Printers using PictBridge"
Page 32
" Printing with Bubble Jet
Printers (PIXMA Series/
SELPHY DS Series) using
PictBridge"
Page 52
" Printing with Non-Canon,
PictBridge Compliant Printers"
Page 53
" Printing with SELPHY CP
Series Printers using Canon
Direct Print"
Page 71
" Printing with Bubble Jet
Printers using Bubble Jet
Direct"
1
Page 4
For the latest information regarding connections between Canon
printers and cameras, please refer to the following URL:
http://web.canon.jp/Imaging/BeBit-e.html
http://www.canon.com/pictbridge
PictBridge Compliance
This camera complies with the industry standard “PictBridge”*.
This allows you to also connect your camera to non-Canon
PictBridge compliant printers and print images with simple
operations using the camera buttons.
* PictBridge: PictBridge is an industry standard for direct printing that
allows you to print images without using a computer by directly
connecting digital cameras and digital camcorders (hereafter “camera”)
to a printer, regardless of the devices’ brand and model.
Disclaimer
• No part of this guide may be reproduced, transmitted, transcribed, stored
in a retrieval system, or translated into any language in any form, by any
means, without the prior written permission of Canon.
• Canon reserves the right to change the specifications of the hardware
described herein at any time without prior notice.
• While every effort has been made to ensure that the information contained
in this guide is accurate and complete, no liability can be accepted for any
errors or omissions.
• Canon makes no warranties for damages resulting from corrupted or lost
data due to a mistaken operation or malfunction of the camera, the
software, the memory cards, personal computers, peripheral devices, or
use of non-Canon memory cards.
Copyright © 2007 Canon Inc. All rights reserved.
2
Page 5
Table of Contents
Direct Print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Allows for Printing without the Use of a Computer . . . . 6
Various Printing Operations Can Be Performed . . . . . . . 6
You Can Also Perform the Following Printing Operations . .7
Printing Movies (Movie Print) . . . . . . . . . . . . . . . . . . . . . . 7
Printing Multiple Images on a Sheet of Paper . . . . . . . . . 7
ID Photo Print. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Connecting the Camera to the Printer . . . . . . . . . . . . . . . . . 8
Disconnecting the Camera and the Printer. . . . . . . . . . . . . 9
Printing with SELPHY ES Series/SELPHY CP Series Printers
using PictBridge. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Easy Print. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Print after Changing the Print Settings. . . . . . . . . . . . . . 11
Selecting Print Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Setting the Date and the File Number Printing Option
Setting the Print Effect . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Setting the Number of Copies . . . . . . . . . . . . . . . . . . . . 14
Setting the Printing Area (Trimming) . . . . . . . . . . . . . . . 15
Selecting the Paper Settings . . . . . . . . . . . . . . . . . . . . . 19
Printing Multiple Images on a Sheet of Paper . . . . . . 21
Printing by Specifying the Print Size
(ID Photo Print) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Printing Images in the Fixed Size . . . . . . . . . . . . . . . 24
Printing Movies (Movie Print) . . . . . . . . . . . . . . . . . . . . . 25
Single-frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Sequence-frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Specifying and Printing Multiple Images
(Setting the DPOF Print Settings) . . . . . . . . . . . . . . . . . . 28
List of Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
. . . . 13
3
Page 6
Printing with Bubble Jet Printers (PIXMA Series/
SELPHY DS Series) using PictBridge . . . . . . . . . . . . . . . . . 32
Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Easy Print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Print after Changing the Print Settings . . . . . . . . . . . . . .33
Selecting Print Settings. . . . . . . . . . . . . . . . . . . . . . . . . . .35
Setting the Date and the File Number Printing Option . .35
Setting the Print Effect. . . . . . . . . . . . . . . . . . . . . . . . . . .36
Setting the Number of Copies . . . . . . . . . . . . . . . . . . . . .37
Setting the Printing Area (Trimming) . . . . . . . . . . . . . . . .38
Selecting the Paper Settings . . . . . . . . . . . . . . . . . . . . . .42
Printing Multiple Images on a Sheet of Paper. . . . . . .44
Printing Movies (Movie Print) . . . . . . . . . . . . . . . . . . . . .46
Specifying and Printing Multiple Images
(Setting the DPOF Print Settings). . . . . . . . . . . . . . . . . . .47
List of Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Printing with Non-Canon, PictBridge Compliant Printers
Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Printing with SELPHY CP Series Printers using
Canon Direct Print. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
If you use Canon Compact Photo Printer SELPHY
CP750/CP740/CP730/CP720/CP710/CP510 . . . . . . . . . . 53
Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Easy Print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Print after Changing the Print Settings . . . . . . . . . . . . . .54
Selecting Print Settings. . . . . . . . . . . . . . . . . . . . . . . . . . .55
Setting the Number of Copies . . . . . . . . . . . . . . . . . . . . .55
Setting the Print Style (Image, Borders and Date) . . . . .55
Setting the Printing Area (Trimming) . . . . . . . . . . . . . . . .57
Printing by Specifying the Print Size (ID Photo Print)
Printing Movies (Movie Print) . . . . . . . . . . . . . . . . . . . . .64
Single-frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Sequence-frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Specifying and Printing Multiple Images
(Setting the DPOF Print Settings). . . . . . . . . . . . . . . . . . .67
4
List of Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70
. . . 52
. . . . .61
Page 7
Printing with Bubble Jet Printers using Bubble Jet Direct
Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Setting the Print Style . . . . . . . . . . . . . . . . . . . . . . . . . . 72
. .71
Settings that Can Be Set with the Camera . . . . . . . . . . . . . . . . . 74
SELPHY ES Series/SELPHY CP Series Printers
using PictBridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Bubble Jet Printers (PIXMA Series/SELPHY DS Series)
using PictBridge
SELPHY CP Series Printers using Canon Direct Print
Bubble Jet Printers using Bubble Jet Direct . . . . . . . 77
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Conventions Used in this Guide
Text in gray boxes: Indicates precautions and restrictions for
correct camera operation.
Text in white boxes: Indicates additional topics that complement
the basic operating procedures.
* The button in this guide referred to as the FUNC./SET button
may be indicated as the SET button depending on the
camera model.
5
Page 8
Direct Print
Allows for Printing without the Use of a Computer
Connect your camera to the printer with the appropriate cable.
Image selection and printing is operated from the camera.
Various Printing Operations Can Be Performed*
Prints to cover the entire
surface of the paper.
Or, prints with a border.
09/09/2007
Add the date.
Specify which portion of
the image to print.
(Trimming)
Multiple pictures can be printed at once. (DPOF print setting)
* Some settings may not be selectable for Non-Canon printers.
6
Page 9
You Can Also Perform the Following Printing Operations
Printing Movies (Movie Print)
You can print a single frame of movies or
extract movie frames at fairly regular intervals
and print them on a single sheet of paper
(pp. 25, 46, 64).
• Capable printers (This function is not available on some printers.)
Single-frame: Canon SELPHY ES series/SELPHY CP series printers,
Sequence-frame: Canon SELPHY ES series/SELPHY CP series printers
Printing Multiple Images on a Sheet of Paper
Compositions of multiple images you specify
of the same dimensions can be printed on a
single sheet of paper (pp. 21, 44).
Moreover, the DPOF print setting* function
allows you to separately print different
images by specifying the number of frames
to be printed per image.
• Capable printers: Printers using PictBridge (Including non-Canon printers)
ID Photo Print
printers using PictBridge (Including non-Canon printers)
(This function is not available on some printers.)
An image can be trimmed, laid out and printed
as ID photos (pp. 22, 61).
• Capable printers:Canon SELPHY ES series/
SELPHY CP series printers
Depending on the printer model, additional printing operations are available
as follows:
• Printing images in a fixed size (p. 24)
• Printing images with the shooting information (p. 43)
* DPOF print settings
This function allows you to preset the images and the number of copies using
the camera button controls. The settings are recorded to a memory card.
Please refer to the Camera User Guide for instructions on setting procedure.
This guide explains how to print images with DPOF print settings.
DPOF=Digital Print Order Format
7
Page 10
Connecting the Camera to the
Printer
Connect the camera to the printer. For instructions on printer and
camera operation methods, refer to their respective user guides.
Set one of the following into the camera.
• Compact power adapter (sold separately)
• Fully charged battery
• New batteries
Place paper, ink cassette/cartridge, etc. into the
printer.
Connect the camera to the printer with the
appropriate interface cable supplied with the camera.
DIGITAL terminal
Camera: Connect the cable to
the DIGITAL terminal.
Printer: Refer to the printer’s
user guide.
Connecting the interface cable
Some printers require specific connection cables which differ
from the above cable. Please refer to the printer’s user guide.
Turn the printer’s power on.
Set the camera to Playback mode and turn the
power on.
Depending on the camera model, the camera’s power will
automatically turn on when the printer’s power is turned on.
The following operations are not available during a camera/printer
connection.
• Language settings that use the FUNC./SET button and the MENU
button (Depending on the camera model, use the FUNC./SET button
8
and the JUMP button).
• Resetting the camera’s settings to default.
Page 11
Disconnecting the Camera and the
Printer
Turn the power off.
Detach the cable.
Pull out the cable while holding the connector plug. Do not
pull out by the cable.
9
Page 12
Printing with
SELPHY ES Series/
SELPHY CP Series
Printers using
PictBridge
Printing
Easy Print
You can print images by pressing only one button after connecting
the camera to the printer.
Make sure that displays in
the upper left corner of the
LCD monitor.
1
Display the images you wish to print and press the
2
button.
If you wish to change the print settings, see Print after
Changing the Print Settings (p. 11).
10
Page 13
Print after Changing the Print Settings
You can change the print settings before printing.
Make sure that displays in
the upper left corner of the
LCD monitor.
1
Sets the date
and the file number
for printing (p. 13)
Sets the print
effect (p. 14)
If displays on the LCD monitor,
please refer to Printing with
SELPHY CP Series Printers using
Canon Direct Print (p. 53).
Display the images you wish
to print and press the FUNC./
SET button.
The print order screen appears.
2
Starts the printing process
Print Order Screen
Select print settings as needed.
3
Sets the number of copies (p. 14)
Sets the trimming portion (p. 15)
Sets the paper size, type and layout
(p. 19)
Select [Print] and press the FUNC./SET button.
• The image will start to print and, when it is completely
finished, the display will revert to the standard playback
4
mode.
• If you press the MENU button, the display will revert to the
standard playback mode and printing will not take place.
11
Page 14
• You cannot print incompatible RAW images.
• It may not be possible to play back or print images shot with a
different camera.
• You may not be able to print if the memory card holds a large
number of images (about 1000).
Cancel Printing
• To cancel printing between images, press the FUNC./SET
button.
A confirmation dialog will display. Select [OK] and press the
FUNC./SET button. The printer will stop printing the current
image and eject the paper.
Printing Errors
• An error message appears if an error occurs for some reason
during the printing process. When the error is resolved, printing
will automatically resume. If printing does not resume, select
[Continue] and press the FUNC./SET button. If [Continue]
cannot be selected, select [Stop], press the FUNC./SET button
and restart the print job. See List of Messages (p. 31) for
details.
12
Page 15
Selecting Print Settings
Default Setting
• The Default option is a fixed setting of the printer.
• The [Date/File No.], [Print Effect], paper setting [Paper Size],
[Paper Type] and [Page Layout] options are available.
Setting the Date and the File Number Printing
Option
Select [ ], then select the
date and the file number
printing option.
You can set the date and the file
number printing as follows:
Date Prints only the date.
File No. Prints only the file number.
1
Prints both the date and the
Both
file number.
Prints neither date nor file
Off
number.
Print effects will differ
according to your printer’s
Default
settings. Refer to your
printer’s user guide for
details.
If you select an image which has had the shooting date embedded
in it using a camera with the Postcard Date Imprint mode, [ ] will
be set to [Off]. If you select [Date], [File No.] or [Both], the date/file
number will be printed on the embedded information which is also
printed.
13
Page 16
Setting the Print Effect
This function uses the camera’s shooting information to optimize
the image data, yielding high quality prints. You can select the
following print effects.
Default
On
Off Prints without any effects.
Red-Eye1 Prints with red-eye corrected.
Print effects will differ according to your printer’s settings. Refer
to your printer’s user guide for details.
Uses the camera’s shooting information to deliver optimum
prints.
Select [ ] and choose a
print effect option.
1
Setting the Number of Copies
Select [ ] and set the
number of prints.
1 to 99 copies can be set.
1
14
Page 17
Setting the Printing Area (Trimming)
You can specify a portion of the image for printing.
Please set [Paper Settings] (p. 19) before setting the trimming
settings. If [Paper Settings] is changed after having made the
trimming settings, you must select the settings again.
Select [Trimming] and press
the FUNC./SET button.
The trimming frame will appear at
the center of the image. If a
trimming setting has already been
selected for the image, the frame
will appear around the previously
selected portion.
The trimming setting screen differs depending on the
camera model. Check which of the following screens
appear before selecting settings.
1
a b
Trimming Frame
Steps 2a and 3a
* Proceed to procedure or depending
on the display screen which appears.
a
Steps 2b and 3b
b
15
Page 18
When screen displays
a
Trim the image.
Changing the Size of the Trimming Frame
• Press the zoom lever or the zoom button to adjust the size of
the trimming frame.
• The trimming frame can be changed to a minimum selection
of approximately half the displayed image (in width and
height) or a maximum selection that is virtually the same size
as the image.
• Expanding the trimming frame beyond its maximum size
cancels the trimming setting.
2a
• When printing an image that has been magnified using the
trimming option, the image quality may become coarser and
grainier depending on the level of magnification.
Moving the Trimming Frame
• Move the trimming frame using the omni selector or the up,
down, right and left buttons.
Rotating the Trimming Frame
• You can rotate the trimming frame by pressing the DISP. (or
DISPLAY) button.
Pressing the MENU button cancels the settings.
Press the FUNC./SET button to close the setting
3a
menu.
16
Page 19
When screen displays
b
Trim the image.
Changing the Size of the Trimming Frame
• Press the up and down buttons to adjust the size of the
trimming frame.
• The trimming frame can be changed to a minimum selection
of approximately half the displayed image (in width and
height) or a maximum selection that is virtually the same size
as the image.
• Expanding the trimming frame beyond its maximum size
cancels the trimming setting.
• When printing an image that has been magnified using the
2b
trimming option, the image quality may become coarser and
grainier depending on the level of magnification.
Rotating the Trimming Frame
• You can rotate the trimming frame using the left and right
buttons.
Moving the Trimming Frame
• Press the FUNC./SET button and use the up, down, right
and left buttons to move the trimming frame. Pressing the
FUNC./SET button again allows you to change the size of
the frame and to rotate it.
Press the MENU button,
select [OK] and press the
FUNC./SET button.
3b
Selecting [Cancel setting] cancels
the selected trimming setting. If
[Edit] is selected, the display
returns to the previous screen.
17
Page 20
• The trimming setting only applies to one image.
• The trimming setting is canceled with the following operations.
• When you set the trimming settings for another image.
• When you close the Print mode (when you turn the camera
power off, change the camera mode, or detach the
connection cable).
• The shooting date or part of the date which has been
embedded in images using a camera with the Postcard Date
Imprint mode may not be printed properly depending on the
trimming setting.
• Images smaller than 640 × 480 pixels cannot be trimmed.
• The paper size and page layout settings determine the shape of
the trimming frame.
• Please use the LCD monitor to set the trimming settings. The
trimming frame may not display correctly on a TV screen.
18
Page 21
Selecting the Paper Settings
Select [Paper Settings] and
press the FUNC./SET button.
The paper size setting screen
1
2
appears.
Select a paper size* and
press the FUNC./SET button.
The default settings and specified
paper cassette size are displayed.
The paper type setting screen
appears.
* Paper sizes vary according to region.
Press the FUNC./SET button.
The page layout screen appears.
3
19
Page 22
4
Select a layout.
The following layout can be
selected.
Default Print effects will differ
Bordered Prints with a border.
Borderless Prints right to the edges
N-up Prints 2, 4 or (8*) images
ID Photo Specifies the print size
Fixed Size Prints by specifying the
* Card size paper only
according to your printer’s
settings. Refer to your
printer’s user guide for
details.
of the paper.
on a single sheet of paper
(p. 21).
and print portion of an
image as an ID photo
(p. 22).
print size of the image on
a sheet of paper (p. 24).
20
Page 23
Printing Multiple Images on a Sheet of Paper
Selecting [N-up] in the layout setting (p. 20) will allow you to
specify the following layout settings.
2 images (height 2 x width 1) of the same dimensions are
2
arranged on a single sheet of paper.
4 images (height 2 x width 2) of the same dimensions are
4
arranged on a single sheet of paper.
8 images (height 4 x width 2) of the same dimensions are
8*
arranged on a single sheet of paper or a label sheet.
* This option can only be selected when printing on card size paper.
[Printing example 1] Printing 3 copies of image A in 2-up
Number of
copies (p. 14)
Layout 2
DPOF print setting (p. 28) allows you to separately print different
images by specifying the number of frames to be printed per image.
[Printing example 2] Printing 2 copies of image A and 1 copy of image
B in 4-up
DPOF print
settings*
(p. 28)
Layout 4
Image A:
[3] copies
Image A:
[2] copies
Image B:
[1] copies
* Please refer to the Camera User Guide for instructions on DPOF print
setting method.
21
Page 24
Printing by Specifying the Print Size (ID Photo Print)
Selecting [ID Photo] in the layout setting (p. 20) will allow you
to specify the print size and print portion of an image as an ID
photo*.
* Images printed with the ID Photo Print function may not be allowed
as a formal certificate photo. Refer to the party (organization) or
administration requiring the photo.
The print size can be specified for only L (Large) resolution
images in the camera connected to the printer.
Select [ID Photo], then press
the FUNC./SET button.
T
Specify the print size by
selecting the length of the
long side and the short side,
then press the FUNC./SET
button.
Specify the size by selecting the
length of the long side first, then
the short side. See the next table
for selectable combinations of the
long side length and the short side
length.
Press the MENU button to exit
without making any trimming
settings.
22
Page 25
20 mm 25 mm 30 mm 35 mm 40 mm 45 mm 50 mm
25 mm
30 mm
35 mm
40 mm
45 mm
50 mm
55 mm
60 mm
Long Side
70 mm
1.8 inch
2.0 inch
Trimming Frame
z Selectable combination
: Available print size
Short Side
1.4 inch 1.5 inch 1.8 inch 2.0 inch
T
Trim the image to specify the
print area.
See Step 2 of Setting the Printing
Area (Trimming) (pp. 16, 17, 18) on
how to trim the image.
The trimming setting screen differs
depending on the camera model.
Follow the steps according to the
screen that displays on your
camera.
Pressing the MENU button will
cancel trimming.
23
Page 26
Printing Images in the Fixed Size
Selecting [Fixed Size] in the layout setting (p. 20) will allow
you to print by specifying the print size of the image on a
sheet of paper.
Select the fixed print size
required.
Depending on the paper size, you
can select print sizes as follows:
Paper size Print size
Credit Card You cannot select
9 × 13 cm
(L size)
10 × 14.8 cm
(Postcard size)
4 in. × 8 in./
10 × 20 cm
(Wide size)
the print size.
89 mm × 55 mm
Default
7 cm × 10 cm
Default
4 in. × 6 in.
7 cm × 10 cm
Default
Select a layout and press the FUNC./SET button.
This ends the paper settings operations.
5
The display returns to the print order screen.
24
Page 27
Printing Movies (Movie Print)
Select the movie you want to
print, then press the FUNC./
SET button.
1
Single-frame
You can choose a single frame from a movie and print it on a sheet
of paper.
2
Movie Control Panel
The movie control panel appears.
If you press the button
instead of the FUNC./SET button,
movie print begins.
Display the frame you wish
to print on the LCD monitor,
select (Print), then press
the FUNC./SET button.
Refer to Viewing Movies section of
the Camera User Guide on how to
display the movie frame you wish
to print.
Select and choose
[Single].
3
Select and set the
number of prints.
1 to 99 copies can be set.
4
Selecting [Paper Settings] and
pressing the FUNC./SET button
will allow [Paper Size], [Paper
Type] and [Page Layout] to be
selected.
25
Page 28
Select [Print] and press the FUNC./SET button.
5
Sequence-frame
You can print movie frames selected automatically at fairly regular
intervals on a sheet of paper.
Select (Print) and press
the FUNC./SET button.
2
Movie Control Panel
Select and choose
[Sequence].
3
If necessary, select [On],
[Off] or [Default] in
(Caption).
If you set (Caption) to [On], you
can print the file number and the
4
Select [Print] and press the FUNC./SET button.
5
elapsed time of the frame at the
same time.
Selecting [Paper Settings] and
pressing the FUNC./SET button
will allow [Paper Size] or [Paper
Type] to be selected.
It may not be possible to play back or print movies shot with a
different camera.
26
Page 29
• The number of printed movie frames per sheet of paper with
[Sequence] is determined by the paper size shown as follows:
(Depending on the number of seconds in the movie, there are
cases when the number of frames indicated below will not be
printed.)
• Card size: 20 frames
• L size: 42 frames
• Postcard size: 63 frames
• Wide size: 84 frames
27
Page 30
Specifying and Printing Multiple Images
(Setting the DPOF Print Settings)
With the camera’s (Print) menu, you can specify and print
multiple images or all the images on a memory card. For
instructions on how to specify images, please refer to Setting the
DPOF Print Settings section of the Camera User Guide. In this
section, we will explain how to print images after specifying them.
In the (Print) menu, select
[Print] and press the FUNC./
SET button.
• When an image or images have
1
2
3
been specified (see the Camera
User Guide), the button will
light up blue. At this time, if you
press the button, the
screen for Step 2 will be displayed.
Set the print effect and paper
settings as required.
Sets the Print Effect (p. 14)
Selects the Paper Settings* (p. 19)
* [Page Layout] cannot be set in the
[Paper Settings] when [Index] is
selected in the [Print Settings] option
in Setting the DPOF Print Settings.
Select [Print] and press the
FUNC./SET button.
• The image will start to print and,
when it is completely finished, the
display will revert to the standard
playback mode.
• If the MENU button is pressed,
the display will revert to the
screen in Step 1 and printing will
not take place.
28
Page 31
• To print the date, set the [Date] setting in [Print Settings] on the
screen in Setting the DPOF Print Settings to [On]. You cannot
set the date to print in Step 2.
• When the print type is set to [Index], the [Date] and [File No.]
cannot be printed at the same time.
• The ID photo print function cannot be used.
• You cannot print movies.
• The maximum number of images printed on one page in the
Index print type depends on the selected paper size.
• Card size: 20 images
• L size: 42 images
• Postcard size: 63 images
• Wide size: 84 images
29
Page 32
Cancel Printing
• To cancel printing between images printed, press the FUNC./
SET button. A confirmation dialog appears. Select [OK] and
press the FUNC./SET button. The printer will stop printing the
current image and eject the paper.
Restarting Printing
• Select [Resume] and press the FUNC./SET button. The
remaining images can be printed.
• Printing cannot be restarted under the following circumstances.
• If the print settings have been changed before restarting.
• If the image for which the print settings were set has been
deleted before restarting.
• If there is very little free space on the memory card when
printing is canceled, it may not be possible to restart printing.
• If printing is canceled because the camera battery is depleted, it
may not be possible to restart printing.
(Replace with a fully charged battery pack or new batteries,
then turn the camera power on again. If you intend to use an
extended period of time, you are recommended to power the
camera with a compact power adapter (sold separately).)
Printing Errors
• An error message appears if an error occurs for some reason
during the printing process. When the error is resolved, printing
will automatically resume. If printing does not resume, select
[Continue] and press the FUNC./SET button. If [Continue]
cannot be selected, select [Stop], press the FUNC./SET button
and restart the print job. See List of Messages (p. 31) for
details.
30
Page 33
List of Messages
The following messages may appear on the camera’s LCD monitor
when an error occurs during a camera and printer connection.
(Depending on the printer model, some messages may not
display.)
Please refer to the printer’s user guide for solutions.
No Paper
No Ink
Paper and ink do not
match
Paper Jam The paper jammed during printing.
Print output tray is
full
Paper Error The paper is not correctly set in the printer.
Cartridge not
compatible
Ink Error The ink cassette is experiencing a problem.
Recharge the printer
battery
Readjust trimming
Hardware Error
File Error
Print error
Paper cassette is incorrectly inserted or out of
paper. Or the paper feed is not operating correctly.
The ink cartridge has not been inserted or has run
out of ink.
The paper and ink are from different sets.
Remove paper from the print output tray.
Cartridge is not compatible.
The printer’s battery pack is depleted.
You attempted to print the image with a different
style than the one used when the trimming settings
were set.
Check whether or not an error other than a paper
or ink error has occurred.
You tried to print an image that is not compatible
with PictBridge. Some images that have been
recorded with another camera or modified using a
computer cannot be printed.
There is an error in the settings. Turn off the printer
and turn it on again, then set the print settings
correctly.
31
Page 34
Printing with
Bubble Jet Printers
(PIXMA Series/
SELPHY DS Series)
using
Printing
Easy Print
You can print images by pressing only one button after connecting
the camera to the printer.
PictBridge
Make sure that displays in
the upper left corner of the
LCD monitor.
1
Display the images you wish to print and press the
2
button.
If you wish to change the print settings, see Print after
Changing the Print Settings (p. 33).
32
Page 35
Print after Changing the Print Settings
You can change the print settings before printing.
Make sure that displays in
the upper left corner of the
LCD monitor.
1
Sets the print
effect (p. 36)
Sets the date and
the file number for
printing (p. 35)
If displays on the LCD monitor,
please refer to Printing with
Bubble Jet Printers using Bubble
Jet Direct (p. 71).
Display the images you wish
to print and press the FUNC./
SET button.
The print order screen appears.
2
Starts the printing process
Print Order Screen
Select print settings as needed.
3
Sets the number of copies (p. 37)
Sets the trimming portion (p. 38)
Sets the paper size, type and layout
(p. 42)
Select [Print] and press the FUNC./SET button.
• The image will start to print and, when it is completely
finished, the display will revert to the standard playback
4
mode.
• If you press the MENU button, the display will revert to the
standard playback mode and printing will not take place.
33
Page 36
• You cannot print incompatible RAW images.
• It may not be possible to play back or print images shot with a
different camera.
• You may not be able to print if the memory card holds a large
number of images (about 1000).
Cancel Printing
• To cancel printing between images, press the FUNC./SET
button.
A confirmation dialog will display. Select [OK] and press the
FUNC./SET button. The printer will stop printing the current
image and eject the paper.
Printing Errors
• An error message appears if an error occurs for some reason
during the printing process. When the error is resolved, printing
will automatically resume. If printing does not resume, select
[Continue] and press the FUNC./SET button. If [Continue]
cannot be selected, select [Stop], press the FUNC./SET button
and restart the print job. See List of Messages (p. 50) for
details.
• On printers equipped with an operation panel, an error number
or message displays on the panel. Please refer to the printer
user guide for the remedies corresponding to the error numbers
or messages.
34
Page 37
Selecting Print Settings
Default Setting
• The Default option is a fixed setting of the printer.
• The [Date/File No.], [Print Effect], paper setting [Paper Size],
[Paper Type] and [Page Layout] options are available.
• On printers equipped with an operation panel, you can change
the settings for those items set to [Default] using the printer's
operation panel.
Setting the Date and the File Number Printing Option
Select [ ], then select the
date and the file number
printing option.
You can set the date and the file
number printing as follows:
Date Prints the date.
File No. Prints only the file number.
1
Both
Off
Default
Prints both the date and
the file number.
Prints neither date nor file
number.
Print effects will differ
according to your printer’s
settings. Refer to your
printer’s user guide for
details.
35
Page 38
If you select an image which has had the shooting date
embedded in it using a camera with the Postcard Date Imprint
mode, [ ] will be set to [Off]. If you select [Date], [File No.] or
[Both], the date/file number will be printed on the embedded
information which is also printed.
Setting the Print Effect
This function uses the camera’s shooting information to optimize
the image data, yielding high quality prints. You can select the
following print effects. However, your desired printing results may
not be obtained depending on the image.
Default
On
Off Prints without any effects.
Vivid
NR Prints with a noise reduction effect.
Vivid+NR Prints using both the [Vivid] and [NR] options.
Face
Red-Eye1 Prints with red-eye color corrected.
Red-Eye2 Prints using 3 setting; [Face], [Red-Eye1], and [NR]
Print effects will differ according to your printer’s settings. Refer
to your printer’s user guide for details.
Uses the camera’s shooting information to deliver optimum
prints.
Prints more vibrant colors, such as the green of trees or the
blue of the sea or sky, than the [On] option.
Brightly prints a person’s face that has become dark because of
backlighting, etc.
Select [ ] and choose a
print effect option.
36
1
Page 39
Setting the Number of Copies
Select [ ] and set the
number of prints.
1 to 99 copies can be set.
1
37
Page 40
Setting the Printing Area (Trimming)
You can specify a portion of the image for printing.
Please set [Paper Settings] (p. 42) before setting the trimming
settings. If [Paper Settings] is changed after having made the
trimming settings, you must select the settings again.
Select [Trimming] and press
the FUNC./SET button.
The trimming frame will appear at
the center of the image. If a
trimming setting has already been
selected for the image, the frame
will appear around the previously
selected portion.
The trimming setting screen differs depending on the
camera model. Check which of the following screens
appear before selecting settings.
1
a b
Trimming Frame
38
Steps 2a and 3a
* Proceed to procedure or depending
on the display screen which appears.
a
Steps 2b and 3b
b
Page 41
When screen displays
a
Trim the image.
Changing the Size of the Trimming Frame
• Press the zoom lever or the zoom button to adjust the size of
the trimming frame.
• The trimming frame can be changed to a minimum selection
of approximately half the displayed image (in width and
height) or a maximum selection that is virtually the same size
as the image.
• Expanding the trimming frame beyond its maximum size
cancels the trimming setting.
2a
• When printing an image that has been magnified using the
trimming option, the image quality may become coarser and
grainier depending on the level of magnification.
Moving the Trimming Frame
• Move the trimming frame using the omni selector or the up,
down, right and left buttons.
Rotating the Trimming Frame
• You can rotate the trimming frame by pressing the DISP. (or
DISPLAY) button.
Pressing the MENU button cancels the settings.
Press the FUNC./SET button to close the setting
3a
menu.
39
Page 42
When screen displays
b
Trim the image.
Changing the Size of the Trimming Frame
• Press the up and down buttons to adjust the size of the
trimming frame.
• The trimming frame can be changed to a minimum selection
of approximately half the displayed image (in width and
height) or a maximum selection that is virtually the same size
as the image.
• Expanding the trimming frame beyond its maximum size
cancels the trimming setting.
• When printing an image that has been magnified using the
2b
trimming option, the image quality may become coarser and
grainier depending on the level of magnification.
Rotating the Trimming Frame
• You can rotate the trimming frame using the left and right
buttons.
Moving the Trimming Frame
• Press the FUNC./SET button and use the up, down, right
and left buttons to move the trimming frame. Pressing the
FUNC./SET button again allows you to change the size of
the frame and to rotate it.
Press the MENU button,
select [OK] and press the
FUNC./SET button.
3b
Selecting [Cancel setting] cancels
the selected trimming setting. If
[Edit] is selected, the display
returns to the previous screen.
40
Page 43
• The trimming setting only applies to one image.
• The trimming setting is canceled with the following operations.
• When you set the trimming settings for another image.
• When you close the Print mode (when you turn the camera
power off, change the camera mode, or detach the
connection cable).
• The shooting date or part of the date which has been
embedded in images using a camera with the Postcard Date
Imprint mode may not be printed properly depending on the
trimming setting.
• Images smaller than 640 × 480 pixels cannot be trimmed.
• The paper size and page layout settings determine the shape of
the trimming frame.
• Please use the LCD monitor to set the trimming settings. The
trimming frame may not display correctly on a TV screen.
41
Page 44
Selecting the Paper Settings
Select [Paper Settings] and
press the FUNC./SET button.
The paper size setting screen
1
2
3
appears.
Select a paper size and press
the FUNC./SET button.
The following paper sizes* are
available: 4" × 6", 5" × 7",
13 × 18 cm, 8.5" × 11", A4,
CreditCard, 8" × 10", 10" × 12", A3,
A3+/13" × 19", 14" × 17", 4" × 7.1",
12 cm DVD/CD and Default.
The paper type setting screen
appears.
* Paper sizes vary according to region.
Select a paper type and
press the FUNC./SET button.
The following paper types are
available: Photo, Fast Photo, Fine
Art, Semi-gloss, Plain and Default.
Please refer to the printer user
guide for the kind of paper that may
be used for each paper type
setting.
The Page Layout screen appears.
42
Page 45
4
Select a layout.
The following layout can be
selected.
Default Print effects will differ
Bordered Prints with a border.
Borderless Prints right to the edges
N-up Prints 2, 4, 9 or 16
Bordered
20-up
35-up
* Prints the camera name, shooting
mode, shutter speed, aperture value,
exposure compensation, ISO speed,
etc., from the Exif information.
according to your
printer’s settings. Refer
to your printer’s user
guide for details.
of the paper.
images on a single sheet
of paper (p. 44)
Prints the shooting
information* onto a blank
sheet of paper (size L or
larger).
Prints DPOF print set
images in sets of 20
images onto A4 size
paper. The shooting
information will be printed
next to the image.
Images with DPOF print
settings are printed at a
size that will fit 35 images
per A4 size paper, laid out
like a contact sheet.
43
Page 46
Printing Multiple Images on a Sheet of Paper
• Selecting [4" x 6"] in the paper size setting (p. 42) will allow
you to specify the following layout settings.
2 images (height 2 x width 1) of the same dimensions are
2
arranged on a single sheet of paper.
4 images (height 2 x width 2) of the same dimensions are
4
arranged on a single sheet of paper.
9 images (height 3 x width 3) of the same dimensions are
9
arranged on a single sheet of paper.
16 images (height 4 x width 4) of the same dimensions are
16
arranged on a single sheet of paper.
[Printing example 1] Printing 3 copies of image A in 2-up
Number of
copies (p. 37)
Layout 2
DPOF print setting (p. 47) allows you to separately print different
images by specifying the number of frames to be printed per image.
[Printing example 2] Printing 3 copies of image A and 2 copies of
image B in 9-up
DPOF print
settings*
(p. 47)
Layout 9
Image A:
[3] copies
Image A:
[3] copies
Image B:
[2] copies
44
* Please refer to the Camera User Guide for instructions on DPOF print
setting methods.
Page 47
Select a layout and press the FUNC./SET button.
This ends the paper settings operations.
5
The display returns to the print order screen.
• Images will print with borders, even if [Borderless] was selected
with the camera in the following cases:
•When [Plain] is selected in the camera's [Paper Type] (cannot be
selected depending on the connected printer model)
•With printers equipped with an operation panel, when [Plain] is selected
with the printer and [Default] is selected in the camera's [Paper Type].
45
Page 48
Printing Movies (Movie Print)
You can choose a single frame from a movie and print it on a sheet
of paper.
Select the movie you want to
print, then press the FUNC./
SET button.
1
2
Movie Control Panel
3
Select [Print] and press the FUNC./SET button.
4
The movie control panel appears.
If you press the button
instead of the FUNC./SET button,
movie print begins.
Display the frame you wish
to print on the LCD monitor,
select (Print), then press
the FUNC./SET button.
Refer to Viewing Movies section of the
Camera User Guide on how to display
the movie frame you wish to print.
Select and set the
number of prints.
1 to 99 copies can be set.
Selecting [Paper Settings] and
pressing the FUNC./SET button
will allow [Paper Size], [Paper
Type] and [Page Layout] to be
selected.
It may not be possible to play back or print movies shot with a
different camera.
46
Page 49
Specifying and Printing Multiple Images
(Setting the DPOF Print Settings)
With the camera’s (Print) menu, you can specify and print
multiple images or all the images on a memory card. For
instructions on how to specify images, please refer to Setting the
DPOF Print Settings section of the Camera User Guide. In this
section, we will explain how to print images after specifying them.
In the (Print) menu, select
[Print] and press the FUNC./
SET button.
• When an image or images have
1
2
3
been specified (see the Camera
User Guide), the button will
light up blue. At this time, if you
press the button, the
screen for Step 2 will be displayed.
Set the print effect and paper
settings as required.
Sets the Print Effect (p. 36)
Selects the Paper Settings* (p. 42)
* [Page Layout] cannot be set in the
[Paper Settings] when [Index] is
selected in the [Print Settings] option
in Setting the DPOF Print Settings.
The A3 and A3+/13" × 19" paper sizes
cannot be selected, either.
Select [Print] and press the
FUNC./SET button.
• The image will start to print and,
when it is completely finished, the
display will revert to the standard
playback mode.
• If the MENU button is pressed,
the display will revert to the
screen in Step 1 and printing will
not take place.
47
Page 50
• To print the date, set the [Date] setting in [Print Settings] on the
screen in Setting the DPOF Print Settings to [On]. You cannot
set the date in Step 2.
• When the print type is set to [Index], both the [Date] and [File
No.] cannot be printed depending on the printer.
• Depending on the printer, the [File No.] cannot be printed when
the print type is set to [Standard].
• You cannot print movies.
48
Page 51
Cancel Printing
• Press the FUNC./SET button to cancel while printing. A
confirmation dialog appears. Select [OK] and press the FUNC./
SET button. The printer will stop printing the current image and
eject the paper.
Restarting Printing
• Select [Resume] and press the FUNC./SET button. The
remaining images can be printed.
• Printing cannot be restarted under the following circumstances.
• If the print settings have been changed before restarting.
• If the image for which the print settings were set has been
deleted before restarting.
• If there is very little free space on the memory card when
printing is canceled, it may not be possible to restart printing.
• If printing is canceled because the camera battery is depleted, it
may not be possible to restart printing.
(Replace with a fully charged battery pack or new batteries,
then turn the camera power on again. If you intend to use an
extended period of time, you are recommended to power the
camera with a compact power adapter (sold separately).)
Printing Errors
• An error message appears if an error occurs for some reason
during the printing process. When the error is resolved, printing
will automatically resume. If printing does not resume, select
[Continue] and press the FUNC./SET button. If [Continue]
cannot be selected, select [Stop], press the FUNC./SET button
and restart the print job. See List of Messages (p. 50) for
details.
• On printers equipped with an operation panel, an error number
or message displays on the panel. Please refer to the printer
user guide for the remedies corresponding to the error numbers
or messages.
49
Page 52
List of Messages
The following messages may appear on the camera LCD monitor if
an error occurs during a camera and printer connection.
(Depending on the printer, some messages may not appear.)
• Please refer to the printer’s user guide for the appropriate
remedies.
: Printing restarts if you select [Continue] and press the
FUNC./SET button. For the remedies to other messages
that might appear, refer to your printer’s user guide.
No Paper
Paper Jam
Paper Error
No Ink
Ink Cassete Error
Low ink level
Ink absorber full
Ink Error
There is no paper set in the printer.
The paper jammed during printing. Select [Stop] to
cancel printing. Remove the jammed paper, reset
some other paper in the printer, then print again.
Either the paper is not set correctly in the printer, or
the size of the paper is wrong. Also open the paper
output tray if it is closed.
In addition, close the the CD-R tray guide when it is
open.
The ink tank has run out of ink or there is no ink tank in
the printer. The number of times that the printer’s error
lamp blinks, and the error message displayed, will
indicate the appropriate remedy for the error. Please
refer to the printer’s user guide for the remedy.
The ink tank needs to be replaced soon. Prepare a
new ink tank. If you select [Continue] in the error
screen, you can restart printing.
You can restart printing if you select [Continue] in the
error screen. Please request replacement of the ink
absorber from your nearest Canon Customer Support
center listed in the contact list provided with the printer
or in the user guide. The ink absorber cannot be
replaced by the user.
There is a problem with the ink. If the printer’s error
lamp is blinking and an error message is displayed,
please refer to the printer’s user guide to ascertain the
problem and its remedy.
50
Page 53
Printer error
Printer in use
Paper lever error
Printer cover open
No print head
Hardware Error
File Error
Incompatible paper
size
Print error
Check print
settings
Disconnect the cable from the printer and turn off the
printer power. Then reconnect the cable and turn on
the printer. If the error persists, please request a repair
from your nearest Canon Customer Support Center
(listed in the contact list provided with the printer).
The printer is warming up or in use. The printer
automatically starts printing the images from the
camera after completing the current printing.
Also, when a message displays regarding checking
the position of the paper thickness lever, check the
position of the paper thickness lever, then press the
OK button on the printer.
Adjust the paper thickness lever to the proper position.
Close the printer cover securely.
If the printer’s error lamp is blinking and an error
message is displayed, please refer to the printer’s user
guide to ascertain the problem and its remedy.
If the printer’s error lamp is blinking and an error
message is displayed, please refer to the printer’s user
guide to ascertain the problem and its remedy.
You tried to print an image that is not compatible with
PictBridge. Some images that have been recorded
with another camera or modified using a computer
cannot be printed.
Paper of a different size than the specified paper size
is set to the printer. Select [Continue] on the error
screen to display the paper size setting screen.
Correct the paper size using the screen (only the
selectable paper sizes appear on the screen).
Check that the correct paper size is selected. If this
error message appears even when the correct paper
size is set, turn off the printer, then turn it on again. If
the error persists, please request a repair from your
nearest Canon Customer Support Center (listed in the
contact list provided with the printer).
Unprintable settings are included. Select [Continue] on
the error screen to display the print order screen.
Check the print settings (only the printable settings
appear on the screen), change the settings if
necessary, then print again.
51
Page 54
Printing with Non-Canon,
PictBridge
Compliant
Printers
Printing
Make sure that displays in
the upper left corner of the
LCD monitor.
1
After this step, follow the procedures in the section Printing with
Bubble Jet Printers (PIXMA Series/ SELPHY DS Series) using
PictBridge (p. 32) to print your images.
However, the following menu options cannot be set.
• Print Effect (p. 36): [Vivid], [NR], [Vivid+NR], [Face ], [Red-
Eye1], [Red-Eye2]
• Paper Size (p. 42): [5" × 7"] or [13 ×18cm]
• Paper Type (p.42): [Fine Art], [Glossy]
• Page Layout (p.43): [Bordered ], [20-up ], [35-up ]
Please also refer to the user guide that came with your printer.
52
Page 55
Printing with SELPHY
CP Series Printers using
Canon Direct Print
If you use Canon Compact Photo Printer
SELPHY CP750/CP740/CP730/CP720/CP710/
CP510
In the following cases, select from [Print Method] in the
camera’s [Set up] menu:
• When printing (wide) size images shot using a Canon digital
camera onto wide-size paper.
• When printing images of human subjects after red-eye
correction.
After this, see Printing with SELPHY ES Series/SELPHY CP
Series Printers using PictBridge (p. 10).
Printing
Easy Print
You can print images by pressing only one button after connecting
the camera to the printer.
Make sure that displays in
the upper left corner of the
LCD monitor.
1
Display the images you wish to print and press the
2
button.
If you wish to change the print settings, see Print after
Changing the Print Settings (p. 54).
53
Page 56
Print after Changing the Print Settings
You can change the print settings before printing.
Make sure that displays in
the upper left corner of the
LCD monitor.
1
Selects the Number of
Copies (p. 55)
If displays on the LCD monitor,
please refer to
SELPHY ES Series/SELPHY CP
Series Printers using PictBridge
(p. 10).
Display the images you wish
to print and press the FUNC./
SET button.
The print order screen appears.
Printing with
2
Sets the Print Style (p. 55)
Sets the Printing Area (Trimming)
Print Order Screen
Select print settings as required.
3
Select [Print] and press the FUNC./SET button.
If you press the MENU button, the display will revert to the
4
standard playback mode and printing will not take place.
• You cannot print incompatible RAW images.
• It may not be possible to play back or print images shot with a
different camera.
54
(p. 57)
Page 57
Cancel Printing
• You cannot stop printing when printing only one copy of an
image. If you are printing more than one copy or more than one
image, you can cancel the rest of the printing by pressing the
FUNC./SET button. Once the current print is finished, a
confirmation dialog appears. Select [OK] and press the FUNC./
SET button.
Printing Errors
• An error message appears if an error occurs for some reason
during the printing process. Select [Stop] or [Resume] and
press the FUNC./SET button. See List of Messages (p. 70) for
details.
The [Resume] option may not appear with some types of errors.
In that case, select [Stop].
Selecting Print Settings
Setting the Number of Copies
Select [ ] and set the number of prints.
1
1 to 99 copies can be set.
Setting the Print Style (Image, Borders and Date)
The following print styles can be selected when printing on large
size or credit card size paper.
Standard Prints one image per page.
Image
Borders
Date
* This option can only be selected when printing on card size paper.
Multiple*
ID Photo Prints a specified print size (p. 61).
Borderless Prints right to the edges of the paper.
Bordered Prints with a border.
On Adds the date to the print.
Off Prints without the date.
Prints eight copies of the same
image on one page.
55
Page 58
In the print order screen, select [Style] and press
1
the FUNC./SET button.
Select [Image], [Borders], or
[Date].
2
Select settings as needed.
3
Press the MENU button to
end the setting selection
process.
With borderless or multiple prints,
the top, bottom and sides of the
4
Print Area Frame
image may be cropped slightly. If
you have not specified a trimming
setting, a frame will appear around
the area of the image that will be
printed, allowing you to check the
portion that will be cropped.
If you select an image which has had the shooting date
embedded in it using a camera with the Postcard Date Imprint
mode, [Date] in the [Style] menu will be set to [Off]. If you set
[Date] to [On], dates will appear twice on the printed image.
56
Page 59
• When printing multiple prints, the [Borders] and the [Date]
cannot be set. (Images are printed without any date or borders.)
• Practically all of the image area displayed on the LCD monitor is
printed on bordered prints.
Setting the Printing Area (Trimming)
You can specify which portion of an image gets printed.
Please set the Print Style (Image, Borders and Date) before setting
the trimming settings. If the print style is changed after having
made the trimming settings, you must select the settings again.
In the print order screen,
select [Trimming] and press
the FUNC./SET button.
The trimming frame will appear at
the center of the image. If a
trimming setting has already been
selected for the image, the frame
will appear around the previously
selected portion.
The trimming setting screen differs depending on the
camera model. Check which of the following screens
appear before selecting settings.
1
a b
Trimming Frame
Steps 2a and 3a
* Proceed to procedure or depending
on the display screen which appears.
a
Steps 2b and 3b
b
57
Page 60
When screen displays
a
Trim the image.
Changing the Size of the Trimming Frame
• Press the zoom lever or the zoom button to adjust the size of
the trimming frame.
• The trimming frame can be changed to a minimum selection
of approximately half the displayed image (in width and
height) or a maximum selection that is virtually the same size
as the image.
• Expanding the trimming frame beyond its maximum size
cancels the trimming setting.
• When printing an image that has been magnified using the
2a
trimming option, the image quality may become coarser and
grainier depending on the level of magnification. If this
happens, the trimming frame displays in red.
Moving the Trimming Frame
• Move the trimming frame using the omni selector or the up,
down, right and left buttons.
Rotating the Trimming Frame
• You can rotate the trimming frame by pressing the DISP. (or
DISPLAY) button.
Pressing the MENU button cancels the settings.
Press the FUNC./SET button to close the setting
3a
menu.
58
Page 61
When screen displays
b
Trim the image.
Changing the Size of the Trimming Frame
• Press the up and down buttons to adjust the size of the
trimming frame.
• The trimming frame can be changed to a minimum selection
of approximately half the displayed image (in width and
height) or a maximum selection that is virtually the same size
as the image.
• Expanding the trimming frame beyond its maximum size
cancels the trimming setting.
• When printing an image that has been magnified using the
2b
trimming option, the image quality may become coarser and
grainier depending on the level of magnification. If this
happens, the trimming frame displays in red.
Rotating the Trimming Frame
• You can rotate the trimming frame using the left and right
buttons.
Moving the Trimming Frame
• Press the FUNC./SET button and use the up, down, right
and left buttons to move the trimming frame. Pressing the
FUNC./SET button again allows you to change the size of
the frame and to rotate it.
Press the MENU button,
select [OK] and press the
FUNC./SET button.
3b
Selecting [Cancel setting] cancels
the selected trimming setting. If
[Edit] is selected, the display
returns to the previous screen.
59
Page 62
• The trimming setting only applies to one image.
• The trimming setting is canceled with the following operations.
• When you set the trimming settings for another image.
• When you close the Print mode (when you turn the camera
power off, change the camera mode, or detach the
connection cable).
• The shooting date or part of the date which has been
embedded in images using a camera with the Postcard Date
Imprint mode may not be printed properly depending on the
trimming setting.
• Images smaller than 640 × 480 pixels cannot be trimmed.
• The selected image and border settings determine the shape of
the trimming frame.
• Please use the LCD monitor to set the trimming settings. The
trimming frame may not display correctly on a TV screen.
60
Page 63
Printing by Specifying the Print Size (ID Photo
Print)
You can specify the print size and print a portion of an image as an
ID photo*.
* Images printed with the ID Photo Print function may not be allowed as a
formal certificate photo. Refer to the party (organization) or administration
requiring the photo.
The print size can be specified for only L (Large) resolution
images in the camera connected to the printer.
In the print order screen,
select [Style] and press the
FUNC./SET button.
1
Select [Image], then select
[ID Photo]. Specify the print
size by selecting the length
of the long side and the short
side, then press the FUNC./
SET button.
2
Specify the size by selecting the
length of the long side first, then
the short side. See the next table
for selectable combinations of the
long side length and the short side
length.
Press the MENU button to exit
without making any trimming
settings.
61
Page 64
Long Side
z Selectable combination
: Available print size
20 mm 25 mm 30 mm 35 mm 40 mm 45 mm 50 m m
25 mm
30 mm
35 mm
40 mm
45 mm
50 mm
55 mm
60 mm
70 mm
1.8 inch
2.0 inch
1.4 inch 1.5 inch 1.8 inch 2.0 inch
Short Side
Trim the image to specify the
print area.
See Step 2 of Setting the Printing
Area (Trimming) (pp. 58, 59) on
how to trim the image.
62
3
The trimming setting screen differs
depending on the camera model.
Trimming Frame
Follow the steps according to the
screen that displays on your
camera.
Press the MENU button to end
trimming.
Press the FUNC./SET button to close the setting
4
menu.
Page 65
• The print size setting only applies to one image.
• The print size setting is canceled with the following operations:
• When you set the print size settings for another image.
• When you close the Print mode (when you turn the camera
power off, change the camera mode, or detach the
connection cable).
• The shape of the trimming frame varies depending on the
specified print size.
• Use the LCD monitor to specify the print size settings. The
trimming frame may not display correctly on a TV screen.
63
Page 66
Printing Movies (Movie Print)
Select the movie you want to
print, then press the FUNC./
SET button.
1
Single-frame
You can choose a single frame from a movie and print it on a sheet
of paper.
2
Movie Control Panel
The movie control panel appears.
If you press the button
instead of the FUNC./SET button,
movie print begins.
Display the frame you wish
to print on the LCD monitor,
select (Print), then press
the FUNC./SET button.
Refer to Viewing Movies section of
the Camera User Guide on how to
display the movie frame you wish
to print.
Select and choose
[Single].
3
64
4
Select and set the
number of prints.
1 to 99 copies can be set.
Selecting [Style] and pressing the
FUNC./SET button will allow
[Image] (excluding [ID Photo]) and
[Borders] to be selected.
Page 67
Select [Print] and press the FUNC./SET button.
5
Sequence-frame
You can print movie frames selected automatically at fairly regular
intervals on a sheet of paper.
Select (Print) and press
the FUNC./SET button.
2
Movie Control Panel
Select and choose
[Sequence].
3
If necessary, select [On] or
[Off] in (Caption).
If you set (Caption) to [On], you
4
can print the file number and the
elapsed time of the frame at the
same time.
Select [Print] and press the FUNC./SET button.
5
It may not be possible to play back or print movies shot with a
different camera.
65
Page 68
• The number of printed movie frames per sheet of paper with
[Sequence] is determined by the paper size shown as follows:
(Depending on the number of seconds in the movie, there are
cases when the number of frames indicated below will not be
printed.)
• Card size: 20 frames
• L size: 42 frames
• Postcard size: 63 frames
• Wide size: 63 frames
66
Page 69
Specifying and Printing Multiple Images
(Setting the DPOF Print Settings)
With the camera’s (Print) menu, you can specify and print
multiple images or all the images on a memory card. For
instructions on how to specify images, please refer to Setting the
DPOF Print Settings section of the Camera User Guide. In this
section, we will explain how to print images after specifying them.
In the (Print) menu, select
[Print] and press the FUNC./
SET button.
• When an image or images have
1
2
3
been specified (see the Camera
User Guide), the button will
light up blue. At this time, if you
press the button, the
screen for Step 2 will be displayed.
Set the print style settings as
required.
•See Setting the Print Style
(Image, Borders and Date)
(p. 55).
• A print style cannot be set if [Print
Settings] on the screen in Setting
the DPOF Print Settings is set to
[Index].
Select [Print] and press the
FUNC./SET button.
• The image will start to print and,
when it is completely finished, the
display will revert to the standard
playback mode.
• If the MENU button is pressed,
the display will revert to the
screen in Step 1 and printing will
not take place.
67
Page 70
• To print the date, set the [Date] setting in [Print Settings] on the
screen in Setting the DPOF Print Settings to [On]. You cannot
set the date to print with the [Style] menu in Step 2.
• When the print type is set to [Index], the [Date] cannot be
printed.
• When the print type is set to [Standard], the [File No.] cannot be
printed.
• The ID photo print function cannot be used.
• The maximum number of images printed on one page in the
Index print type depends on the selected paper size.
• Card size: 20 images
• L size: 42 images
• Postcard size: 63 images
• Wide size: 63 images
Cancel Printing
• To cancel printing between images printed, press the FUNC./
SET button.
Once the current print is completed, a confirmation dialog
appears. Select [OK] and press the FUNC./SET button.
Restarting Printing
• Select [Resume] and press the FUNC./SET button. The
remaining images can be printed.
• Printing cannot be restarted under the following circumstances.
• If the print settings have been changed before restarting.
• If the image for which the print settings were set has been
deleted before restarting.
• If there is very little free space on the memory card when
printing is canceled, it may not be possible to restart printing.
• If printing is canceled because the camera battery is depleted, it
may not be possible to restart printing.
(Replace with a fully charged battery pack or new batteries,
then turn the camera power on again. If you intend to use an
extended period of time, you are recommended to power the
camera with a compact power adapter (sold separately).)
68
Page 71
Printing Errors
• An error message appears if an error occurs for some reason
during the printing process. Select [Stop] or [Resume] and
press the FUNC./SET button.
* The [Resume] option may not appear with some types of
errors. In that case, select [Stop].
69
Page 72
List of Messages
The following messages may appear on the camera’s LCD monitor
when an error occurs during a camera and printer connection.
(Depending on the printer model, some messages may not
display.)
• Please refer to the printer’s user guide for solutions.
No Paper
No Ink
Incompatible paper
size
Incompatible ink
size
Ink Cassette Error The ink cassette is experiencing a problem.
Paper and ink do not
match
Paper Jam The paper jammed during printing.
Paper has been
changed
Recharge the printer
battery
Communication
Error
Readjust trimming
Cannot Print!
Could not print xx
images
70
Paper cassette is incorrectly inserted or out of
paper. Or the paper feed is not operating correctly.
The ink cartridge has not been inserted or has run
out of ink.
Wrong paper size is loaded in the printer.
Wrong ink cassette size is loaded in the printer.
The paper and ink are from different sets.
Paper size was changed after the print style was
displayed.
The printer’s battery pack is depleted.
The printer is experiencing a data transmission
error.
You attempted to print the image with a different
style than the one used when the trimming settings
were set.
You attempted to print an image that was
photographed with another camera, one recorded
in a different data type, or one that has been edited
on a computer.
You attempted to use the DPOF print settings to
print xx images that were photographed with
another camera, that have been recorded in a
different data type, or that have been edited on a
computer.
Page 73
Printing with
Bubble Jet Printers
using
Printing
1
After this step, follow the procedures in the section Printing with
SELPHY CP Series Printers using Canon Direct Print (p. 53) to
print your images.
However, please note that some menus and precautions
differ, as listed below.
See pages 54 and 68.
• You cannot print movies or incompatible RAW images.
Bubble Jet Direct
Make sure that displays in
the upper left corner of the
LCD monitor.
If displays, refer to Printing
with Bubble Jet Printers (PIXMA
Series/ SELPHY DS Series) using
PictBridge (p. 32).
71
Page 74
Cancel Printing
• To cancel printing between images printed, press the FUNC./
SET button. A confirmation dialog appears. Select [OK] and
press the FUNC./SET button.
The printer will stop printing the current image and eject the
paper.
Printing Errors
• An error message appears if an error occurs for some reason
during the printing process. When the error is resolved, printing
will automatically resume. If printing does not resume, select
[Continue] and press the FUNC./SET button. If [Continue]
cannot be selected, select [Stop], press the FUNC./SET button
and restart the print job.
• With printers equipped with an operation panel, the error
number displays on the panel. Please refer to the printer user
guide for the remedies corresponding to the error numbers.
See page 55.
Setting the Print Style
You can select from among the following print styles.
Select the paper size from the following:
Paper
Borders
Date
Borderless Prints right to the edges of the paper.
Bordered Prints with a border.
On Adds the date to the print.
Off Prints without the date.
[Card #1], [Card #2], [Card #3], [LTR] or [A4].
For usable paper types, please refer to the
printer user guide.
72
Page 75
• The ID photo print function cannot be used.
• If you select an image which has had the shooting date
embedded in it using a camera with the Postcard Date Imprint
mode, [Date] in the [Style] menu will be set to [Off]. If you set
[Date] to [On], dates will appear twice on the printed image.
See page 68.
• To print the date, set the [Date] setting in [Print Settings] on the
screen in Setting the DPOF Print Settings to [On]. You cannot
set the date to print with the [Style] menu in Step 2.
• When the print type is set to [Index], the [Date] and [File No.]
cannot be printed at the same time.
• When the print type is set to [Standard], the [File No.] cannot be
printed.
• The ID photo print function cannot be used.
73
Page 76
Settings that Can Be Set with the
Camera
SELPHY ES Series/SELPHY CP Series
Printers using PictBridge
(When appears on the camera’s LCD monitor during a
connection)
Print Options Selectable with the Camera
Date
File No.
Date/File No.
Print Effect
Number of Prints 1 to 99
Trimming
Paper Settings
Movies
(Movie Print)
*1
Compatible with SELPHY CP series only.
74
*2
This option can only be selected when [CreditCard] size paper is set.
Both
Off
Default
Default
On
Off
Red-Eye1
Paper Size
Page Layout
Single
Sequence
CreditCard
9 × 13 cm
10 × 14.8 cm
4" × 8" or 10 × 20 cm*
Default
Default
Bordered
Borderless
N-up 2/4/(8*
ID Photo
Fixed Size
1
2
)
Page 77
Bubble Jet Printers (PIXMA Series/
SELPHY DS Series) using PictBridge
(When appears on the camera’s LCD monitor during a
connection)
Print Options Selectable with the Camera
Date
File No.
Date/File No.
Print Effect
Number of Prints 1 to 99
Trimming
Movies (Movie Print)
Both
Off
Default
Default
On
Off
Vivid
NR
Vivid+NR
Face
Red-Eye1
Red-Eye2
75
Page 78
Paper Size*
Paper Settings
Paper Type
Page Layout
* Paper sizes vary according to region.
4" × 6"
13 × 18 cm
5" × 7"
A4
8.5" × 11"
CreditCard
8" × 10"
10" × 12"
A3
A3+/13" × 19"
14" × 17"
4" × 7.1"
12 cm DVD/CD
Default
Photo
Fast Photo
Fine Art
Semi-gloss
Plain
Default
Default
Bordered
Borderless
N-up 2/4/9/16
Bordered (print with the
shooting information)
20-up (print with the shooting
information)
35-up (print images laid out
like a 35mm contact sheet)
76
Page 79
SELPHY CP Series Printers using Canon Direct Print
Bubble Jet Printers using Bubble Jet Direct
(When or appears on the camera’s LCD monitor during a
connection)
SELPHY
CP Series
Print Options Selectable with the Camera
Number of Prints 1 to 99 {{
1 image { –
Image
Multiple {*
ID Photo { –
Card #1, Card #2,
Paper
Style
Trimming {{
Movies
(Movie Print)
*1This option can only be selected when [CreditCard] size paper is set.
2
*
Paper size will be set automatically according to the paper cassette set to
the printer.
Card #3, Letter (LTR)
or A4
Bordered {{
Borders
Borderless {{
Date {{
Single { –
Sequence { –
Printers
using
Canon
Direct Print
–*
1
2
Bubble Jet
Printers
using
Bubble Jet
Direct
–
{
77
Page 80
MEMO
78
Page 81
MEMO
79
Page 82
MEMO
80
Loading...