Ensure that you read the Safety Precautions (pp. 194–201).
Confirming the Package Contents
COPY
The following items are included in the package. If something is
missing, please contact the retail outlet at which you purchased the
product.
Camera
abc
Memory Card
df
(32MB)
Wrist Strap WS-DC2
g
User Guides
j
•Camera User Guide
Direct Print User Guide
•
(Connecting the camera to a printer)
Software Starter Guide
•
(Connecting the camera to a computer)
• “Canon Customer Support” Leaflet
• “Use of Genuine Canon Accessories Recommended” Leaflet
See the PDF manuals available on the Canon website.
http://web.canon.jp/Imaging/information-e.html
• ZoomBrowser EX/ImageBrowser Software User Guide
Battery Pack NB-5L
(with Terminal Cover)
Interface Cable
e
IFC-400PCU
Canon Digital Camera
h
Solution Disk
Battery Charger
CB-2LX/CB-2LXE
AV Cable
AVC-DC400
Warranty Card
i
You may not be able to achieve the full performance of this camera
with the included memory card.
Let’s Get Started!
COPY
This guide is divided into the following two sections.
First...
Let’s Get Started!
1
Getting Started
This section explains how to prepare the camera for use and the
basics of shooting, viewing and printing images. Start out by
familiarizing yourself with the camera and mastering the basics.
Next...
Learning More
Once you have mastered the basics, use the camera’s many
features to shoot more challenging photos. Details on using each
function are described in this section, including how to connect the
camera to a TV to view images, and how to make My Camera
settings.
p. 7
p. 37
Table of Contents
COPY
2
Table of Contents
Items marked with a are lists or charts that summarize camera
functions or procedures.
You can set the time delay and the numbers of shots you wish to take
in advance.
10 sec. Self-Timer: shoots 10 seconds after you press the shutter
button.
• 2 seconds before the shut ter releases, the self-timer lamp and
sound speed up.
2 sec. Self-Timer: shoots 2 seconds after you press the shutter
button.
• At the same time as the shutter button is pressed, the self-timer
sound beeps rapidly*, the self-timer lamp blinks, a nd the shutter
releases 2 seconds later.
Custom Timer: you can change the delay time (0–10, 15, 20, 30 s ec.)
and number of shots (1–10).
• When [Delay] is set to 2 or mor e seconds, the self-timer sound
beeps quickly 2 seconds before the shutter releases*. When
[Shots] is set to more than 1, the self-timer sound o nly beeps before
the first shot.
* This may differ depending on your My Camera settings (p. 177).
Press the button.
1
1. Use the o r button to change
the Self-timer mode.
• Pressing the MENU button while this
screen is displayed will allow you to
set the delay and number of shots as
when Custom Timer is selected
Available Shooting Modes p. 222
: This mark denotes issues that may affect the camera’s
operation.
: This mark denotes additional topics that complement the
basic operating procedures.
Mode switch position
Modes
• Shooting Movies ()
• Special Scene ()
• Shooting Still Images ()
• Playback ()
Some functions may not be
available in certain shooting
modes. If there is no notation
to that effect, the function
may be used in all modes.
5
Explanations in this guide are based on the camera’s default settings
at time of purchase.
Specifications are subject to change without prior notice. As a result,
the illustrations and screenshots used in this guide may differ from
the actual camera.
Please Read
COPY
6
Please Read
Test Shots
Before you try to photograph important subjects, we highly recommend that
you shoot several trial images to confirm that the camera is operating and
being operated correctly.
Please note that Canon Inc., its subsidiaries and affiliates, and its
distributors are not liable for any consequential damages arising from any
malfunction of a camera or accessory, including memory cards, that results
in the failure of an image to be recorded or to be recorded in a way that is
machine readable.
Warning Against Copyright Infringement
Please note that Canon digital cameras are intended for personal use and
should never be used in a manner that infringes upon or contravenes
international or domestic copyright laws and regulations. Please be advised
that in certain cases the copying of images from performances, exhibitions,
or commercial properties by means of a camera or other device may
contravene copyright or other legal rights even if the image was shot for
personal use.
Warranty Limitations
This camera’s warranty is only effective in the country of sale. If a problem
arises while the camera is in use abroad, please convey it back to the
country of sale before proceeding with a warranty claim to a Canon
Customer Support Help Desk.
For Canon Customer Support contacts, please see the customer
support list supplied with your camera.
Camera Body Temperature
If your camera is used for prolonged periods, the camera body may
become warm. Please be aware of this and take care when operating the
camera for an extended period.
About the LCD Monitor
The LCD monitor is produced with extremely high-precision
manufacturing techniques. More than 99.99% of the pixels operate to
specification. Less than 0.01% of the pixels may occasionally misfire or
appear as red or black dots. This has no effect on the recorded image and
does not constitute a malfunction.
Video Format
Please set the camera’s video signal format to the one used in your region
before using it with a TV monitor.
Language Setting
Please see Setting the Display Language (p. 13) to change the language
setting.
Getting Started
COPY
z Preparations
z Shooting Still Images
z Viewing Still Images
z Erasing
z Printing
z Embedding the Date in the Image Data
z Shooting Movies
z Viewing Movies
z Downloading Images to a Computer
z System Map
7
You can use SD memory cards, SDHC (SD High
Capacity) memory cards, MultiMediaCards,
MMCplus cards and HC MMCplus cards in this
camera. These cards are collectively referred to
as memory cards in this guide.
Preparations
COPY
8
Preparations
Charging the Battery
1. Insert the battery into the battery charger.
Getting Started
Align these symbols
2. Plug the battery charger (CB-2LX) into a power outlet,
or attach the power cord to the battery charger (CB2LXE) and plug it into a power outlet.
• Battery charger model names and types vary by region.
For CB-2LX
Charge Indicator
Charging:
Lights red
For CB-2LXE
3. Remove the battery after charging is complete.
• Charging takes approximately 2 hours 5 minutes.
Charge Indicator
Charging complete:
Lights green
To protect the battery and prolong its life, do not charge it for
longer than 24 hours continuously.
Preparations
COPY
Installing the Battery and Memory Card
1. Slide the cover (a) and open it out (b).
2. Insert the battery.
• It will lock into place with a click.
3. Insert the memory card until it clicks into place.
Write Protect Tab
(Only SD memory cards)
Back
• Confirm that the write protect tab is
unlocked (only SD and SDHC
memory cards).
• Check the memory card for the
correct orientation.
9
Getting Started
Ensure that the memory card is correctly oriented before
inserting it in the camera. Inserting it backward may cause the
camera to fail to recognize the memory card or to malfunction.
Preparations
COPY
10
4. Close the cover (a, b).
Getting Started
To Remove the Battery
Press the battery lock in the direction of
the arrow (a) and pull the battery out
(b).
To Remove the Memory Card
Use a finger or the toggle on the wrist strap to push the memory card in
until you hear a click, then release it.
Preparations
COPY
Attaching the Wrist Strap
Use the wrist strap when using the camera to prevent yourself from
accidentally dropping the camera.
Toggle
You can change its position on the strap. The
toggle can be used to open the A/V OUT and
DIGITAL terminal cover and when inserting or
removing memory cards.
Use the Wrist Strap to Open the Terminal Cover
Hook your fingernail or the wrist
strap toggle under the bottom edge
of the A/V OUT and DIGITAL
terminal cover to open it.
11
Getting Started
Preparations
COPY
12
Setting the Date and Time
The Date/Time settings menu will appear the first time the power is
turned on.
Power Button
Getting Started
Button
Button
Buttons
1. Press the power button.
2. Select the month, day, year and
time, and the display order.
1. Use the or button to select a
category.
2. Use the or button to set the
value.
3. Press the button.
To Change a Previously Set Date/Time
Use the following procedures to display the Date/Time settings
window, and then perform Steps 2 and 3 above.
1. Press the button.
2. Use the or button to select
the (Set up) menu.
3. Use the or button to select
[Date/Time].
4. Press the button.
Preparations
COPY
z A rechargeable lithium battery is built into the camera to
save such settings as the date/time. Insert a charged battery
into the camera. Or if you use the separately sold AC
Adapter Kit ACK-DC30, the battery will charge in about four
hours. It will charge even if the camera is turned off.
z The date/time settings may be lost after approximately three
weeks if you remove the main battery. Reset the date/time
settings if this occurs.
Setting the Display Language
You can change the language displayed in the LCD monitor menus
and messages.
Button
13
Getting Started
Button
Button
Buttons
1. Press the (Playback) button.
2. Hold down the button and press the button.
3. Use the , , or button to select a language.
4. Press the button.
Shooting Still Images
COPY
14
Shooting Still Images
Getting Started
Control Dial
(Auto Mode)
Shutter ButtonPower Button
Mode Switch
1. Press the power button.
• The start-up sound will play and the start-up image will display in
the LCD monitor.
• Pressing the power button again turns the power off.
2. Select a shooting mode.
1. Set the mode switch to
(Shooting).
2. Turn the control dial to select
(Auto).
3. Aim the camera at the subject.
Avoiding Camera Shake
Keep your arms tight against your body while
holding the camera firmly by the sides. Using
a tripod is also effective.
Use the wrist strap to avoid dropping
the camera during use.
Wrist Strap
Indicator
4. Press the shutter button lightly (press halfway) to set
the focus.
• When the camera focuses, it beeps twice and the indicator lights
green (orange when the flash fires).
Shooting Still Images
COPY
5. Without changing anything else, press the shutter
button all the way (press fully) to shoot.
• The shutter sound will play once and the image will record.
• Recorded images are displayed on the LCD monitor for
approximately 2 seconds immediately after shooting (Rec.
review). Shooting is possible while the image is displayed.
• Holding down the shutter button after taking a shot will continue
displaying the image.
• The indicator will blink green and the file will record to the
memory card.
To Shoot Images in Focus
The camera automatically sets the focus when you press the shutter
button halfway*.
* The shutter button has a two-stage action. Pressing it down to the first stage is
referred as “pressing halfway”.
Press
halfway to
focus
Correct
Beeps
twice
Press fully
Just
pressing
fully
Incorrect
15
Getting Started
Shooting preparations
complete: Lights green
(orange when the flash fires)
AF frames will display in
green on the LCD monitor
at the points of focus.
Recording:
Blinks green
Recording:
Blinks green
Mute Setting
Pressing the DISP. button while turning on the camera power will
silence all camera sounds except for warning sounds. Setting can be
changed from the
(Set up) Menu [Mute].
Viewing Still Images
COPY
16
Viewing Still Images
Getting Started
Control Dial
( / Buttons)
1. Press the (Playback) button.
2. Use the or button to display
the image you wish to view.
• Use the button to move to the
previous image and the button to
move to the next image.
• The images advance more quickly if
you keep the button pressed
continuously, but they will appear
coarse.
• Use the control dial to select images. Turn the dial
counterclockwise to view a previous image and clockwise to view
the next image.
z Setting [Resume] to either [Last seen]* or [Last shot] in the
playback mode (* Default setting). If you select [Last seen],
the last image viewed will display (Resume Playback).
z Following the procedure below will display the last image,
regardless of the [Resume] setting.
- Shooting an image
- Changing the memory card
- Editing an image on the memory card using a computer
(Play) menu allows you to specify the image to display in
Button
Erasing
COPY
Erasing
Button
17
Getting Started
Control Dial
( / Buttons)
/Buttons
Button
Button
1. Press the (Playback) button.
2. Use the or button to select an image to erase and
press the button.
• You can select images by turning the control dial.
3. Confirm that [Erase] is selected
and press the button.
• To exit instead of erasing, select
[Cancel].
Please note that erased images cannot be recovered. Exercise
adequate caution before erasing an image.
Printing
COPY
18
Printing
A/V OUT and DIGITAL Terminal
Getting Started
Control Dial
( / Buttons)
Interface
Cable
Button
Button
1. Connect the camera to a direct print compatible printer.
• Hook your fingernail or the wrist strap toggle under the bottom
edge of the camera’s terminal cover to open it, then insert the
interface cable all the way into the connector.
• See the printer’s user guide for connection instructions.
• Printing is also possible using a non-Canon-brand printer
provided the printer is PictBridge compliant. Refer to the Direct Print User Guide for details.
2. Turn on the printer.
3. Press the camera’s (Playback) button to turn on the
power.
• The button will light blue.
4. Use the or button to select an image to print and
press the button.
• You can select images by turning the control dial.
• The button will blink blue and printing will start.
• After you finish printing, turn off the camera and the printer and
disconnect the interface cable.
Printing
COPY
19
Printing From a Print List
You can add images directly to a print list by merely pressing the
button immediately after shooting or while playing back images.
You can then print the images from the print list, when connecting the
camera to a printer.
Adding to a Print List
1. Press the button (still images only).
2. Add to the print list.
1. Use the or button to set
the number of copies to print.
2. Use the or button to select
[Add].
3. Press the button.
• To remove an image from the print
list, press the button again,
select [Cancel] using the or button, then press the
FUNC./SET button.
Printing Images in a Print List
This explanation is based on the use of a Canon SELPHY ES series
or SELPHY CP series printer.
1. Connect the camera to your printer.
2. Print images.
1. Use the or button to select
[Print now].
• Use the or button to confirm
the images added to the print list.
2. Press the button.
• Printing will begin.
• If printing is halted and resumed,
printing will start from the next
image in the queue.
Number of copies to print
Getting Started
Embedding the Date in the Image Data
COPY
20
Embedding the Date in the Image Data
Getting Started
Control Dial
(
Buttons)
This section explains how to embed date information on images as
they are recorded (Date Stamp).
• The date stamp cannot be deleted from the image data once it has
been embedded. Ensure that the camera’s date/time is set correctly
beforehand (p. 12).
• The image size is fixed to 2M (1600 x 1200) setting and the
compression to (Fine) (appropriate for printing L-size or postcardsize prints).
1. Select a shooting mode.
1. Set the mode switch to (Shooting).
2. Turn the control dial to select (Auto).
• Shooting modes other than can be selected (except for
(Digital Macro), (Stitch Assist), and ).
Mode Switch
Button
Button
Embedding the Date in the Image Data
COPY
2. Select [Date Stamp].
1. Press the button.
2. Use the or button to select
.
3. Use the or button to select
.
• The area which will not be printed
will appear gray.
•Press the DISP. button, then use the
or button to select [Date/
Time].
You can use the following methods to imprint the
date on images lacking imprinted date stamps.
• Set with the camera’s Digital Print Order Format (DPOF)
function.
Set the [Date] option to [On] in [Print Settings] in the (Print)
menu.
• Connect the camera to a printer and imprint the date.
See the Direct Print User Guide.
• Insert a memory card into the printer and imprint the date.
See your printer user guide.
• Use the supplied software.
See the Software Starter Guide.
21
Getting Started
Shooting Movies
COPY
22
Shooting Movies
Power Button
Microphone
Getting Started
Control Dial
1. Press the power button.
2. Select a shooting mode.
1. Set the mode switch to (Movie).
2. Turn the control dial to select
(Standard).
3. Aim the camera at the subject.
z Do not touch the microphone while recording.
z Do not press any buttons other than the shutter button. The
sound that buttons make will be recorded in the movie.
(Standard Mode)
Shutter Button
Mode Switch
Indicator
4. Press the shutter button lightly
COPY
(press halfway) to set the focus.
• An electronic beep will sound twice
and the indicator will light green when
the camera focuses.
• The exposure, focus and white
balance are automatically set when
you press the button halfway.
5. Without changing anything else,
press the shutter button all the
way (press fully) to shoot.
• Recording starts.
Shooting Movies
Shooting preparations
complete: Lights green
23
Getting Started
• During the recording, the elapsed
recording time and [
in the LCD monitor.
Rec.] will display
z
6. Press the shutter button again
(press fully) to stop recording.
• The indicator will blink green and the
data will be recorded onto the memory
card.
• Recording will stop automatically when
the maximum recording time elapses,
or the built-in memory or memory card
become full.
Elapsed Time
Recording: Blinks green
Viewing Movies
COPY
24
Viewing Movies
Getting Started
Control Dial
(
Buttons)
Button
Button
1. Press the (Playback) button.
2. Use the or button to display a movie and press the
button.
• Images with a icon are movies.
• You can switch between images by
turning the control dial.
3. Use the or button to select (Playback) and
press the button.
• The movie will start playing.
• If you press the FUNC./SET button
during playback, you can pause and
restart the movie.
• You can adjust the playback volume
with the or button.
Downloading Images to a Computer
COPY
Downloading Images to a Computer
You are recommended to use the supplied software to download
images to your computer.
Items to Prepare
• Camera and computer
• Canon Digital Camera Solution Disk supplied with the camera
• Interface cable supplied with the camera
System Requirements
Please install the software on a computer meeting the following
minimum requirements.
Windows
OSWindows Vista
Computer ModelThe above OS should be pre-installed on computers with built-in
CPUWindows VistaPentium 1.3 GHz or higher
RAMWindows Vista512 MB or more
InterfaceUSB
Free Hard Disk
Space
Display1,024 x 768 pixels/High Color (16 bit) or better
Windows XP Service Pack 2
Windows 2000 Service Pack 4
USB ports.
Windows XP/Windows 2000Pentium 500 MHz or higher
Windows XP/Windows 2000256 MB or more
• Canon Utilities
- ZoomBrowser EX200 MB or more
- PhotoStitch40 MB or more
•
Canon Camera TWAIN Driver
25 MB or more
25
Getting Started
Macintosh
OSMac OS X (v10.3 – v10.4)
Computer ModelThe above OS should be pre-installed on computers with built-in
CPUPowerPC G3/G4/G5 or Intel Processor
RAM256 MB or more
InterfaceUSB
Free Hard Disk
Space
Display1,024 x 768 pixels/32,000 Colors or better
USB ports.
• Canon Utilities
- ImageBrowser300 MB or more
- PhotoStitch50 MB or more
Downloading Images to a Computer
COPY
26
Preparing to Download Images
When using Windows 2000, make sure to install the software first
before connecting the camera to the computer.
1. Installing the software.
Getting Started
Windows
1. Place the Canon Digital Camera Solution Disk in the
computer’s CD-ROM drive.
2. Click [Easy Installation].
• Follow the onscreen messages to
proceed with the installation.
3. Click [Restart] or [Finish] once the
installation is complete.
• When the installation is finished,
[Restart] or [Finish] will display. Click
the button that appears.
4. Remove the CD-ROM from the
drive when your normal desktop
screen appears.
Macintosh
Double-click the icon in the CDROM window. When the installer panel
appears, click [Install]. Follow the
onscreen instructions to proceed.
Downloading Images to a Computer
COPY
2. Connecting the camera to a computer.
1. Connect the supplied interface cable to the computer’s USB
port and to the camera’s A/V OUT and DIGITAL terminal.
• Hook your fingernail or the wrist strap toggle under the bottom
edge of the camera’s terminal cover to open it, then insert the
interface cable all the way into the connector.
USB Port
Interface Cable
A/V OUT and DIGITAL
Terminal
3. Preparing to download images to the computer.
1. Press the camera’s (Playback)
button to turn on the power.
If the Digital Signature Not Found window appears, click [Yes].
The USB driver will automatically finish installing onto the
computer when you attach the camera and open a connection.
27
Getting Started
Downloading Images to a Computer
COPY
28
4. Displaying CameraWindow.
Windows
1. Select [Canon CameraWindow] and
click [OK].
Getting Started
If this event dialog does not appear, click the [Start] menu and
select [All Programs] or [Programs], followed by [Canon
Utilities], [CameraWindow], [CameraWindow] and
[CameraWindow].
CameraWindow will display.
Macintosh
CameraWindow will appear when you establish a connection
between the camera and computer. If it fails to appear, click the
[CameraWindow] icon on the Dock (the bar which appears at the
bottom of the desktop).
Preparations for downloading images are now finished. Please
proceed to the Downloading Images Using the Camera (Direct Transfer) section (p. 29) (except Windows 2000).
z Please refer to the Software Starter Guide regarding how to
download images using the computer.
z With Windows 2000, you can download images using the
computer.
Loading...
+ 197 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.