• Make sure you read this guide, including the "Safety
Precautions" section, before using the camera.
• Store this guide safely so that you can use it in the future.
ENGLISH
Check if the following items are included in your camera package.
Checking the Package Contents
Camera
Battery Pack NB-9L
(with Terminal Cover)
Interface Cable
IFC-400PCU
Battery Charger
CB-2LB/CB-2LBE
Stereo AV Cable
AVC-DC400ST
Wrist Strap
WS-DC7
Warranty
Card
Getting Started
DIGITAL CAMERA
Solution Disk
“Canon Customer
Support” Leaflet
COPY
If anything is missing, contact the retailer from which you purchased the
camera.
Using the PDF Manuals
Also refer to the PDF manuals on the CD-ROM. After installation, shortcut icons
appear on the desktop. If the software installation fails, you can find the manuals in
the Readme folder on the CD-ROM.
• Camera User Guide (This Guide)
Once you have mastered the basics, use the camera’s many
features to shoot more challenging photos.
• Personal Printing Guide
Read when you want to connect the camera to a printer (sold
separately) and print.
• Software Guide
Read when you want to use the included software.
• A memory card is not included.
• Adobe Reader is required to view the PDF manuals.
2
Test Shots and Disclaimer
Read This First
COPY
Take some initial test shots and play them back to make sure the images
were recorded correctly. Please note that Canon Inc., its subsidiaries and
affiliates, and its distributors are not liable for any consequential damages
arising from any malfunction of a camera or accessory, including memory
cards, that results in the failure of an image to be recorded or to be recorded
in a way that is machine readable.
Warning Against Copyright Infringement
The images recorded with this camera are intended for personal use. Do not
record images that infringe upon copyright laws without the prior permission
of the copyright holder. Please be advised that in certain cases the copying
of images from performances, exhibitions, or commercial properties by
means of a camera or other device may contravene copyright or other legal
rights even if the image was shot for personal use.
Warranty Limitations
This camera’s warranty is only effective in the country of sale. If there is a
problem with the camera while abroad, please return it to the country of sale
before proceeding with a warranty claim to a Canon Customer Support Help
Desk. For Canon Customer Support contacts, please see the customer
support list supplied with your camera.
LCD Monitor (Screen)
• The LCD monitor is produced with extremely high-precision manufacturing
techniques. More than 99.99% of the pixels operate to specification, but
occasionally non-performing pixels may appear as bright or dark dots. This
is not a malfunction and has no effect on the recorded image.
• The LCD monitor may be covered with a thin plastic film for protection
against scratches during shipment. If so, remove the film before using the
camera.
Camera Body Temperature
Please take care when operating the camera for an extended period as the
camera body may become warm. This is not a malfunction.
3
What Do You Want to Do?
4
● Shoot, leaving it to the camera to make settings .........................25
Index ............................................. 175
8
• Icons are used in the text to represent the camera buttons and switches.
Conventions Used in This Guide
Right button
FUNC./SET button
Up button
Left button
Down button
Control dial Â
COPY
• Language that displays on the screen appears inside [ ] (square brackets).
• The directional buttons, control dial, and FUNC./SET button are
represented by the following icons.
•: Things you should be careful about
•: Troubleshooting tips
•: Hints for getting more out of your camera
•: Supplemental information
• (p. xx): Reference pages (“xx” stands for a page number)
• This guide assumes all functions are at their default settings.
• The various types of memory cards that can be used in this camera are
collectively referred to as memory cards in this guide.
9
• Before using the product, please ensure that you read the safety precautions
Safety Precautions
COPY
described below. Always ensure that the product is used correctly.
• The safety precautions noted on the following pages are intended to prevent injuries
to yourself and other persons, or damage to the equipment.
• Be sure to also check the guides included with any separately sold accessories you
use.
Warning
• Do not trigger the flash in close proximity to human eyes.
Exposure to the intense light produced by the flash could damage eyesight. In
particular, remain at least one meter (39 inches) away from infants when using the
flash.
• Store this equipment out of the reach of children and infants.
Strap: Putting the strap around a child’s neck could result in asphyxiation.
• Use only recommended power sources.
• Do not attempt to disassemble, alter or apply heat to the product.
• Avoid dropping or subjecting the product to severe impacts.
• To avoid the risk of injury, do not touch the interior of the product if it has been
dropped or otherwise damaged.
• Stop using the product immediately if it emits smoke, a strange smell, or
otherwise behaves abnormally.
• Do not use organic solvents such as alcohol, benzine, or thinner to clean the
equipment.
• Do not let the product come into contact with water (e.g. sea water) or other
liquids.
• Do not allow liquids or foreign objects to enter the camera.
This could result in electrical shock or fire.
If liquids or foreign objects come into contact with the camera interior, immediately
turn the camera power off and remove the battery.
If the battery charger becomes wet, unplug it from the outlet and consult your
camera distributor or the closest Canon Customer Support Help Desk.
• Do not play the supplied CD-ROM(s) in any CD player that does not support data
CD-ROMs.
Playing the CD-ROM(s) in an audio CD player (music player) could damage the
speakers. It is also possible to suffer hearing loss from listening with headphones
to the loud sounds of a CD-ROM played on a music CD player.
Denotes the possibility of serious injury or death.
10
Safety Precautions
COPY
• Use only the recommended battery.
• Do not place the battery near or in direct flame.
• Unplug the power cord periodically and wipe away any dust and dirt that has
collected on the plug, the exterior of the power outlet, and the surrounding area.
• Do not handle the power cord with wet hands.
• Do not use the equipment in a manner that exceeds the rated capacity of the
electrical outlet or wiring accessories. Do not use if the power cord or plug are
damaged, or not fully plugged into the outlet.
• Do not allow dirt or metal objects (such as pins or keys) to contact the terminals
or plug.
The battery may explode or leak, resulting in electrical shock or fire. This could
cause injury and damage the surroundings. In the event that a battery leaks and
the battery acid contacts eyes, mouth, skin or clothing, immediately flush with
water.
Caution
• Be careful not to bang the camera or subject it to strong impacts or shocks when
hanging it by the strap.
• Be careful not to bump or push strongly on the lens.
This could lead to injury or damage the camera.
• Be careful not to subject the screen to strong impacts.
If the screen cracks, injury may result from the broken fragments.
• When using the flash, be careful not to cover it with your fingers or clothing.
This could result in burns or damage to the flash.
• Avoid using, placing or storing the product in the following places.
- Places subject to strong sunlight.
- Places subject to temperatures above 40 °C (104 °F).
- Humid or dusty areas.
These could cause leakage, overheating or an explosion of the battery, resulting in
electrical shock, fire, burns or other injuries.
High temperatures may cause deformation of the camera or battery charger
casing.
• The slideshow transition effects may cause discomfort when viewed for
prolonged periods.
Denotes the possibility of injury.
11
Safety Precautions
COPY
Caution
• Do not aim the camera at bright light sources (the sun, etc.).
Doing so may damage the image sensor.
• When using the camera on a beach or at a windy location, be careful not to allow
dust or sand to enter the camera.
This may cause the camera to malfunction.
• In regular use, small amounts of smoke may be emitted from the flash.
This is due to the high intensity of the flash burning dust and foreign materials stuck
to the front of the unit. Please use a cotton swab to remove dirt, dust or other
foreign matter from the flash to prevent heat build-up and damage to the unit.
• Remove and store the battery when you are not using the camera.
If the battery is left inside the camera, damage caused by leakage may occur.
• Before you discard the battery, cover the terminals with tape or other insulators.
Contacting other metal materials may lead to fire or explosions.
• Unplug the battery charger from the power outlet after charging is complete, or
when you are not using it.
• Do not place anything, such as cloth on top of the battery charger while it is
charging.
Leaving the unit plugged in for a long period of time may cause it to overheat and
distort, resulting in fire.
• Do not place the battery near pets.
Pets biting the battery could cause leakage, overheating or explosion, resulting in
fire or damage.
• Do not sit down with the camera in your pocket.
Doing so may cause malfunctions or damage the screen.
• When putting the camera in your bag, ensure that hard objects do not come into
contact with the screen.
• Do not attach accessories to the strap.
Doing so may cause malfunctions or damage the screen.
Denotes the possibility of damage to the equipment.
12
Getting Started
1
Strap
COPY
This chapter explains preparations before shooting, how to shoot in
A mode, and then how to view and erase the images you take. The
latter part of this chapter explains how to shoot and view movies and
transfer images to a computer.
Attaching the Strap/Holding the Camera
• Be sure to attach the supplied strap to the camera and wrap it around your
wrist when shooting to avoid dropping the camera.
• Keep your arms tight against your body while holding the camera firmly by
the sides. Be sure that your fingers do not block the flash.
13
Use the included charger to charge the battery. Be sure to charge the battery
Charging the Battery
CB-2LB
CB-2LBE
COPY
as it is not charged at the time of purchase.
Remove the cover.
Insert the battery.
● Align the o marks on the battery and
charger, then insert the battery by sliding it
in ( ) and down ( ).
Charge the battery.
● For CB-2LB: Flip out the plug ( ) and
plug the charger into a power outlet ( ).
● For CB-2LBE: Plug the power cord into
the charger, then plug the other end into a
power outlet.
X The charge lamp lights orange and
charging starts.
X The charge lamp will light green when
charging has finished. Charging takes
approx. 1 hour and 50 minutes.
Remove the battery.
● Unplug the battery charger from the power
outlet, then remove the battery by sliding it
in ( ) and up ( ).
To protect the battery and prolong its life, do not charge it for longer than
24 hours continuously.
14
Charging the Battery
COPY
Approximate Number of Shots That Can Be Taken
Number of Shots
• The number of shots that can be taken is based on the Camera & Imaging Products
Association (CIPA) measurement standard.
• Under some shooting conditions, the number of shots that can be taken may be less
than mentioned above.
Playback Time
Approx. 150
Approx. 4 hrs. 30 min.
Battery Charge Indicator
An icon or message will appear on the screen indicating the battery’s charge
state.
“Change the battery pack.”Depleted. Recharge the battery.
Using the battery and charger effectively
• Charge the battery on the day, or the day before, it will be used.
Charged batteries continue to discharge naturally even if they are not used.
• How to store the battery for long periods:
Deplete and remove the battery from the camera. Attach the terminal cover and
store the battery. Storing a battery for long periods of time (about a year) without
depleting it may shorten its life span or affect its performance.
• The battery charger can also be used when abroad.
The charger can be used in regions that have 100 – 240 V (50/60 Hz) AC power.
If the plug does not fit the outlet, use a commercially available plug adapter. Do
not use electrical transformers for foreign travel as they will cause damage.
• The battery may develop a bulge.
This is a normal characteristic of the battery and does not indicate a problem.
However, if the battery bulges to the point where it will no longer fit into the
camera, please contact a Canon Customer Support Help Desk.
• If the battery is quickly depleted even after charging, it has reached the end of
its life span. Purchase a new battery.
15
• SD memory cards (2 GB and less)*
Compatible Memory Cards (Sold Separately)
COPY
• SDHC memory cards
(more than 2 GB, up to and including 32 GB)*
• SDXC memory cards
(more than 32 GB)*
• MultiMediaCards
• MMCplus memory cards
• HC MMCplus memory cards
• Eye-Fi Cards
* This memory card complies with the SD standards. Some cards may not operate
properly depending on the brand of card used.
Depending on your computer’s OS version, SDXC memory cards may not
be recognized when using a commercially available card reader. Check to
make sure that your OS supports this function beforehand.
About Eye-Fi Cards
This product is not guaranteed to support Eye-Fi card functions (including
wireless transfer). In case of an issue with an Eye-Fi card, please check with
the card manufacturer.
Also note that an approval is required to use Eye-Fi cards in many countries
or regions. Without approval, use of the card is not permitted. If it is unclear
whether the card has been approved for use in the area, please check with
the card manufacturer.
16
Insert the included battery.
Inserting the Battery
Terminals
COPY
Open the cover.
● Slide the cover ( ) and open it ( ).
Insert the battery.
● Insert the battery as shown until it locks
● Be sure to insert the battery in the correct
Close the cover.
● Close the cover ( ), and press downward
Removing the Battery
● Open the cover and press the battery lock
X The battery will pop up.
into place with a click.
direction or it will not properly lock into
place.
as you slide it until it clicks into place ( ).
in the direction of the arrow.
17
Insert a memory card (sold separately).
Inserting the Memory Card
Terminals
COPY
Check the card’s write-protect tab.
● If the memory card has a write-protect tab,
you will not be able to record images if the
tab is in the locked position. Slide the tab
up until you hear a click.
Open the cover.
● Slide the cover ( ) and open it ( ).
Insert the memory card.
● Insert the memory card asshown until it
locks into place with a click.
● Be sure the memory card is oriented
correctly. Inserting the memory card in the
wrong direction could damage the camera.
Close the cover.
● Close the cover ( ) and press downward
as you slide it until it clicks into place ( ).
Removing the Memory Card
● Open the cover and push the memory card
in until you hear a click, then slowly release
it.
X The memory card will pop up.
18
Inserting the Memory Card
Number of shots that can be taken
COPY
What if [Memory card locked] appears on the screen?
SD, SDHC and SDXC memory cards, and Eye-Fi cards have a write-protect tab.
If this tab is in the locked position, [Memory card locked] will appear on the screen
and you will not be able to take or erase images.
Approximate Number of Shots per Memory Card
Memory Card
Number of Shots
• Values are based on the default settings.
• The number of shots that can be taken will vary depending on camera settings, the
subject and the memory card used.
Can you check the number of shots that can be taken?
You can check the number of shots that can be taken when the camera is in a
Shooting mode (p. 25).
4 GB16 GB
14716026
19
The Date/Time settings screen will appear the first time the camera is turned
Setting the Date and Time
COPY
on. Since the dates and times recorded into your images are based on these
settings, be sure to set them.
Turn on the camera.
● Press the power button.
X The Date/Time screen will appear.
Set the date and time.
● Press the qr buttons to choose an option.
● Press the op buttons or turn the  dial
to set a value.
Complete the setting.
● Press the m button.
X Once the date and time have been set, the
Date/Time screen will close.
● Pressing the power button will turn off the
camera.
Reappearing Date/Time screen
Set the correct date and time. If you have not set the date and time, the Date/Time
screen will appear each time you turn on the camera.
Daylight saving time settings
If you choose in Step 2 and press the op buttons or turn the  dial and
choose , you will set the time to daylight saving (1 hour ahead).
20
Setting the Date and Time
COPY
Changing the Date and Time
You can change the current date and time settings.
Display the menus.
● Press the n button.
Choose [Date/Time] in the 3 tab.
● Press the qr buttons to choose the 3
tab.
● Press the op buttons or turn the  dial
to choose [Date/Time], then press the m
button.
Change the date and time.
Date/Time battery
• The camera has a built-in date/time battery (backup battery) that allows the
date/time settings to be retained for about three weeks after the battery pack
has been removed.
• By inserting a charged battery or connecting an AC adapter kit (sold separately,
p. 39) the date/time battery can be charged in about 4 hours even if the camera
is not turned on.
• If the date/time battery is depleted, the [Date/Time] menu will appear when you
turn the camera on. Follow the steps on p. 20 to set the date and time.
● Follow Steps 2 and 3 on p. 20 to adjust the
setting.
● Pressing the n button will close the
menu.
21
You can change the language that displays on the screen.
Setting the Display Language
COPY
Enter Playback mode.
● Press the 1 button.
Display the settings screen.
● Press and hold the m button, then
immediately press the n button.
Set the display language.
● Press the opqr buttons or turn the Â
dial to choose a language, then press the
m button.
X Once the display language has been set,
the settings screen will close.
What if the clock appears when the m button is pressed?
The clock will appear if too much time passes between pressing the m button
and the n button in Step 2. If the clock appears, press the m button to
remove the clock and repeat Step 2.
You can also change the display language by pressing the n button,
choosing the 3 tab, and choosing the [Language] menu item.
22
Before you use a new memory card or one that has been formatted in other
Formatting Memory Cards
COPY
devices, you should format the card with this camera.
Formatting (initializing) a memory card erases all data on the memory card.
As you cannot retrieve the erased data, exercise adequate caution before
formatting the memory card.
Before formatting an Eye-Fi card (p. 155), be sure to install the software
contained on the card to a computer.
Display the menu.
● Press the n button.
Choose [Format].
● Press the qr buttons to choose the 3
tab.
● Press the op buttons or turn the  dial
to choose [Format], then press the m
button.
Choose [OK].
● Press the qr buttons or turn the  dial to
choose [OK], then press the m button.
Format the memory card.
● Press the op buttons or turn the  dial
to choose [OK], then press the m button.
X The memory card will be formatted.
Complete formatting.
X When formatting ends, [Memory card
formatting complete] will appear on the
screen.
● Press the m button.
23
Pressing the Shutter Button
Pressing the Shutter Button
COPY
Formatting or erasing data on a memory card merely changes the file
management information on the card and does not ensure its contents are
completely erased. Be careful when transferring or disposing of a memory
card. When disposing of a memory card, take precautions such as
physically destroying the card to prevent personal information leaks.
The total capacity of the memory card displayed in the formatting screen
may be less than indicated on the memory card.
To take images that are in focus, be sure to first press the shutter button
lightly (halfway) to focus, then press fully to shoot.
Press halfway (Press lightly to focus).
● Press lightly until the camera beeps twice
and AF frames appear where the camera
focused.
Press fully (Press fully to shoot).
X The camera plays the shutter sound and
takes the shot.
● Since the shot is being taken while the
shutter sound plays, be careful not to move
the camera.
Does the length of the shutter sound change?
• Since the time required to shoot differs according to the scene you want to take,
the length of the shutter sound may change.
• If the camera or subject moves while the shutter sound is playing, the recorded
image may be blurry.
If you shoot without pressing the shutter button halfway, the image may not
be in focus.
24
Since the camera can determine the subject and shooting conditions, you can
Taking Pictures (Smart Auto)
Zoom bar
COPY
let it automatically select the best settings for the scene and just shoot. The
camera can also detect and focus on faces, setting the color and brightness
to optimal levels.
Turn on the camera.
● Press the power button.
X The start-up screen will appear.
Choose A mode.
● Set the mode switch to A.
● When you point the camera toward the
subject, the camera will make a slight
noise as it determines the scene.
X The icon for the determined scene will
appear in the upper right of the screen.
X The camera will focus on detected faces
and display frames on them.
X Black bars will appear on the left and right
sides of the screen. These areas cannot
be recorded when shooting.
Compose the shot.
● Moving the zoom lever toward i
(telephoto) will zoom in on your subject,
making it appear larger. Moving the lever
toward j (wide angle) will zoom out from
your subject, making it appear smaller.
(The zoom bar showing the zoom position
appears on the screen.)
● If you move the zoom lever all the way
toward j (wide angle) or i (telephoto),
you will zoom quickly. If you move it
slightly, you will zoom slowly.
25
Taking Pictures (Smart Auto)
AF Frame
COPY
Focus.
● Press the shutter button halfway to focus.
X When the camera focuses, it will beep
twice and AF frames will appear where the
camera focused.
Several AF frames will appear when the
camera focuses on more than one point.
Shoot.
● Press the shutter button fully.
X The camera will play the shutter sound and
shoot. The flash will automatically fire in
low light conditions.
X The image will appear on the screen for
about two seconds.
● You can take a second picture even while
What if an icon appears in the upper right of the screen?
The icon for the determined scene will appear in the upper right of the screen. For
details on the icons that appear, see “Scene Icons” (p. 163).
an image is displayed by pressing the
shutter button again.
26
Taking Pictures (Smart Auto)
COPY
What if...
•
What if the color and brightness of the images do not turn out as expected?
The scene icon (p.
scene. If this happens, try shooting in G mode (p.
• What if white and gray frames appear when you point the camera toward
a subject?
When faces are detected, a white frame appears on the face of the main
subject, while gray frames appear on other detected faces. The frames will
follow the subjects within a certain range (p. 84).
If the main subject moves, however, the gray frames will disappear, leaving only
the white frame.
• What if a blue frame appears when you press the shutter button halfway?
A blue frame appears when a moving subject is detected; the focus and
exposure will continuously adjust (Servo AF).
• What if the indicator blinks orange and flashes on the screen?
Attach the camera to a tripod so that the camera does not move and blur the
image.
• What if the camera does not play any sounds?
Pressing the n button while turning on the camera power will turn off all
sounds except for warning sounds. To turn the sounds on, press the n
button to choose [Mute] in the 3 tab, then press the qr buttons to choose [Off].
• What if the image comes out dark even if the flash fired when shooting?
The subject is too far away for the flash to reach. The effective flash range is
approximately 30 cm – 3.5 m (12 in. – 12 ft.) at maximum wide angle (j), and
approximately 1.0 – 2.0 m (3.3 – 6.6 ft.) at maximum telephoto (i).
•
What if the camera beeps once when the shutter button is pressed halfway?
Your subject may be too close. Move the zoom lever toward j and hold it until
the lens stops moving. The camera will be at its maximum wide angle setting
and you will be able to focus on subjects that are about 1 cm (0.4 in.) or more
away from the end of the lens. Move the zoom lever toward i and hold it until
the lens stops moving. The camera will be at its maximum telephoto setting and
you will be able to focus on subjects that are about 1 m (3.3 ft.) or more away
from the end of the lens.
• What if the lamp lights when the shutter button is pressed halfway?
To reduce red-eye and to assist in focusing, the lamp may light when shooting
in dark areas.
• What if the h icon blinks when you try to shoot?
The flash is charging. You can shoot when recharging ends.
163
) that appears on the screen may not match the actual
72
).
27
You can view the images you have taken on the screen.
Viewing Images
COPY
Enter Playback mode.
● Press the 1 button.
X The last image you took will appear.
Choose an image.
● Pressing q or turning the  dial counter-
clockwise will cycle through the images in
the reverse order they were taken, from
the newest image to the oldest.
● Pressing r or turning the  dial
clockwise will cycle through images in the
order they were taken, from oldest to
newest.
● The images change more quickly if you
keep the qr buttons pressed, but they will
appear coarse.
● The lens will retract after approximately 1
Switching to Shooting mode
• Pressing the shutter button halfway while in Playback mode switches the
camera to Shooting mode.
minute elapses.
● Pressing the 1 button again while the
lens is retracted will turn off the power.
28
You can choose and erase images one at a time. Please note that erased
Erasing Images
COPY
images cannot be recovered. Exercise adequate caution before erasing an
image.
Enter Playback mode.
● Press the 1 button.
X The last image you took will appear.
Choose an image to erase.
● Press the qr buttons or turn the  dial to
display an image to erase.
Erase the image.
● After pressing the m button, press op
buttons or turn the  dial to choose a,
then press the m button again.
X [Erase?] appears on the screen.
● Press the qr buttons or turn the  dial to
choose [Erase], then press the m button.
X The displayed image will be erased.
● To exit instead of erasing, press the qr
buttons or turn the  dial to choose
[Cancel], then press the m button.
29
The camera can automatically select all settings so that you can shoot movies
Shooting Movies
Remaining Time
Elapsed Time
COPY
just by pressing the movie button. The audio will record in stereo.
If you continue shooting for a long time, the camera may become warm. This
is not a malfunction.
Choose A mode.
● Set the mode switch to A.
Compose the shot.
●
Moving the zoom lever toward i will zoom
in on your subject, making it appear larger.
Moving the lever toward j will zoom out
from your subject, making it appear smaller.
Shoot.
● Press the movie button.
X The camera will beep once, recording will
start, and [ Rec] and the elapsed time will
appear on the screen.
● Once shooting begins, take your finger off
the movie button.
● If you change the composition of your shot
during shooting, the focus, brightness and
tone will automatically adjust.
30
Loading...
+ 150 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.