Canon POWERSHOT A70, POWERSHOT A60, POWERSHOT S400, POWERSHOT S50, POWERSHOT A300 User Manual

Windows/Macintosh Windows Macintosh
Software Starter Guide For Version 12
(For the Canon Digital Camera Solution Disk Version 12)
You must install the software bundled on the Canon Digital Camera Solution Disk before connecting the camera to the computer.
Install the software.
Windows Macintosh
p. 10 p. 52
Connect the camera to the computer.
CDI-E070-010 XX02CHXX © 2003 CANON INC. PRINTED IN JAPAN
This guide explains how to install the software programs and briefly introduces their functions and operating procedures.
• Please read the software license agreement in this guide before using the software. By using the software, you agree to be bound by the terms of the agreement.
SAFETY PRECAUTIONS
The precautions noted within this guide are intended to instruct you in the safe and correct use of the products and to prevent injuries or damage to yourself, other persons and property. Please read and ensure that you understand them before proceeding to other sections of the guide.
Warnings
This symbol indicates topics that could lead to death or serious injury if ignored or handled incorrectly.
Canon Customer Support
For Canon Customer Support contacts, please see the Canon Limited Warranty supplied with your camera.
Adobe Customer Support
Adobe Systems Inc. technical support information is available in the PDF file format on the supplied CD-ROM.
Warnings
• Do not play the supplied CD-ROM(s) in any CD player that does not support data CD- ROMs. Playing the CD-ROM(s) in an audio CD player (music player) could damage the speakers. It is also possible to suffer from hearing loss from listening with headphones to the loud sounds of a CD-ROM played on a music CD player.Disclaimer
Disclaimer
• While every effort has been made to ensure that the information contained in this guide is accurate and complete, no liability can be accepted for any errors or omissions. Canon reserves the right to change the specifications of the hardware and software described herein at any time without prior notice.
• No part of this guide may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form, by any means, without the prior written permission of Canon.
• Canon makes no warranties for damages resulting from corrupted or lost data due to a mistaken operation or malfunction of the camera, the software, the CompactFlash™ cards (CF cards), personal computers, peripheral devices, or use of non-Canon CF cards.
Trademark Acknowledgments
• Canon and PowerShot are trademarks of Canon Inc.
• ArcSoft, the ArcSoft logo, ArcSoft PhotoImpression and ArcSoft VideoImpression are trademarks or registered trademarks of ArcSoft, Inc.
• Adobe is a trademark of Adobe Systems Incorporated.
• CompactFlash is a trademark of SanDisk Corporation.
• iBook and iMac are trademarks of Apple Computer, Inc.
• Macintosh, PowerBook, Power Macintosh and QuickTime are trademarks of Apple Computer Inc., registered in the United States and other countries.
• Microsoft, Windows and Windows logo are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
• Netscape and Netscape Navigator are trademarks or registered trademarks of Netscape Communications Corporation in the United States and other countries. Netscape Communicator is a trademark of Netscape Communications Corporation.
• Other names and products not mentioned above may be registered trademarks or trademarks of their respective companies.
PDF File Location and Opening Instructions
Windows: Place the Adobe Photoshop LE CD-ROM in the drive and double-click the [My
Computer] icon on the Windows desktop, followed by the [Photosle] CD-ROM icon. The window will show folders with language names. Double-click the appropriate language folder and the [Support.pdf] file within it.
Macintosh: Place the Adobe Photoshop LE CD-ROM in the drive and double-click the [Adobe
Photoshop LE] icon on the desktop. Double-click the appropriate language folder from among those displayed, followed by the [Support.pdf] file.
To read PDF files, Adobe Acrobat Reader must already be installed on your computer. An installer for this program is on the Adobe Photoshop LE CD-ROM within each language folder in a folder labeled [Acroread].
ArcSoft Customer Support
North America
46601 Fremont Blvd., Fremont, CA 94538 Tel: (510) 440-9901 (Mon. - Fri., 8:30 AM - 5:30 PM PST) E-mail: support@arcsoft.com
Other Regions
Please see the ArcSoft web site: http://www.arcsoft.com/maininternational.html.
Copyright © 2003 Canon Inc. All rights reserved.
READ CAREFULLY BEFORE USING
Canon Software License Agreement
IMPORTANT - READ THIS AGREEMENT BEFORE USING THE SOFTWARE ON THE CD-ROM IN THIS BOX. BY USING THE SOFTWARE, YOU AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT.
This is a license agreement (the “Agreement”) between you and Canon Inc. (“Canon”). IF YOU DO NOT AGREE TO THE TERMS AND CONDITIONS OF THIS AGREEMENT, DO NOT
USE THE SOFTWARE PROGRAM ON THE CD-ROM (INCLUDING ALL SOUND AND IMAGE DATA) AND THE USER MANUAL IN THIS BOX (COLLECTIVELY, THE “SOFTWARE”) AND PROMPTLY RETURN THE SOFTWARE TO YOUR POINT OF PURCHASE FOR A REFUND.
In consideration of the right to use the SOFTWARE, you agree to abide by the terms and conditions of this Agreement.
1. LICENSE: Canon grants you the personal, non-exclusive right to use the SOFTWARE only on a
single computer. You may physically transfer the SOFTWARE from one computer to another provided that the SOFTWARE is used on only one computer at a time. You shall not install or use the SOFTWARE on a network, multiple CPU, multiple site arrangement, or any other hardware configuration where the SOFTWARE is accessible to more than one CPU or to more than one user.
With respect to the sound and image data (“Data”) contained in the Software, which are to be downloaded to the applicable Canon digital camera product, Canon grants you a personal, non- exclusive license to use the Data on a single Canon digital camera product only.
YOU SHALL NOT ASSIGN, SUBLICENSE, RENT, LEASE, LOAN, CONVEY OR OTHERWISE USE, TRANSFER, COPY, TRANSLATE, CONVERT TO ANOTHER PROGRAMMING LANGUAGE, ALTER, MODIFY, DECOMPILE OR DISASSEMBLE THE SOFTWARE, IN WHOLE OR IN PART, EXCEPT AS EXPRESSLY PROVIDED IN THIS AGREEMENT.
2. BACK-UP COPY: You may make one copy of the SOFTWARE solely for back-up purposes, or
copy the SOFTWARE onto the permanent storage device (e.g. a hard disk) of your computer and retain the original for back-up purposes. Any other copying of the SOFTWARE is a violation of this Agreement. You must reproduce and include the copyright notice on the back-up copy.
3. SUPPORT AND UPDATES: Neither Canon, nor its subsidiaries, dealers or distributors will be responsible for providing maintenance or support for use of the SOFTWARE. No updates, fixes or support will be made available for the SOFTWARE.
4. LIMITED WARRANTY AND LIMITATION OF LIABILITY: It is your responsibility to choose, maintain and match the hardware and software components of your computer system. Thus Canon does not guarantee uninterrupted service or correction of errors or that the functions or performance of the SOFTWARE will meet your requirements. THE SOFTWARE IS LICENSED ON AN “AS IS” BASIS AND WITHOUT WARRANTY OR CONDITION OF ANY KIND. The CD-ROM storing the SOFTWARE is warranted only against defective material under normal use for a period of ninety (90) days after purchase from an authorized Canon dealer as evidenced by your sales receipt. Your sole remedy for a defective CD-ROM shall be replacement of the same without charge when returned by you at your expense to your point of purchase and proven to be defective upon inspection. The Replacement CD-ROM will be warranted for the remainder of the original ninety (90) day warranty period of the defective CD-ROM. The limited warranty does not apply if the failure of the CD-ROM resulted from accident, abuse or misapplication of the SOFTWARE and shall not extend to anyone other than the original user of the SOFTWARE.
EXCEPT AS SPECIFICALLY SET FORTH IN THIS PARAGRAPH 4, CANON, CANON’S SUBSIDIARIES, DISTRIBUTORS AND DEALERS DISCLAIM ALL WARRANTIES, OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE.
NEITHER CANON NOR ANY OF CANON’S SUBSIDIARIES, DISTRIBUTORS OR DEALERS IS LIABLE FOR ANY DAMAGES HOWSOEVER CAUSED, INCLUDING WITHOUT LIMITATION, DIRECT, CONSEQUENTIAL OR INCIDENTAL LOSS OR DAMAGE INCLUDING LOSS OF PROFITS, EXPENSE OR INCONVENIENCE HOWSOEVER CAUSED OR ARISING OUT OF THE SOFTWARE OR THE USE THEREOF.
i
ii
NEITHER CANON, NOR ANY OF CANON’S SUBSIDIARIES, DISTRIBUTORS OR DEALERS SHALL HAVE ANY OBLIGATION TO INDEMNIFY YOU AGAINST ANY CLAIM OR SUIT BROUGHT BY A THIRD PARTY ALLEGING THAT THE SOFTWARE OR THE USE THEREOF INFRINGES ANY INTELLECTUAL PROPERTY OF SUCH THIRD PARTY.
SOME STATES, PROVINCES OR LEGAL JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, OR THE LIMITATION OR EXCLUSION OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR PERSONAL INJURY OR DEATH RESULTING FROM NEGLIGENCE ON THE PART OF THE SELLER, SO THE ABOVE DISCLAIMERS AND EXCLUSIONS MAY NOT APPLY TO YOU.
5. TERM: This Agreement is effective upon your using the SOFTWARE and remains in effect until
expiration of all copyright interests in the SOFTWARE unless earlier terminated. You may terminate this Agreement by destroying the SOFTWARE. This Agreement will also terminate without notice to you if you fail to comply with any of the terms of this Agreement and you must then promptly return the SOFTWARE. In addition, Canon may enforce its other legal rights.
6. U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE:
The SOFTWARE is a “commercial item,” as that term is defined at 48 C.F.R. 2.101 (Oct 1995), consisting of “commercial computer software” and “commercial computer software documentation,” as such terms are used in 48 C.F.R. 12.212 (Sept 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.72024 (June 1995), all U.S. Government End Users shall acquire the SOFTWARE with only those rights set forth herein. Manufacturer is Canon Inc./30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan.
7. EXPORT RESTRICTIONS: You agree to comply with all export laws and restrictions and regulations of the country involved, and not to export or re-export, directly or indirectly, the SOFTWARE in violation of any such laws and restrictions and regulations, or without all necessary approvals.
8. SEVERABILITY:
In the event that any provision of this Agreement is declared or found to be illegal by any court or tribunal of competent jurisdiction, such provision shall be null and void with respect to the jurisdiction of that court or tribunal and all the remaining provisions of this Agreement shall remain in full force and effect.
9. CONTROLLING LAW: The terms of this Agreement as it relates to purchases of the Software in the United States of America shall be governed and construed in all respects in accordance with the laws and regulations of the State of New York, without reference to choice of law principles. The terms of this Agreement as it relates to purchases of the Software in Canada shall be governed by the laws of the province of Ontario.
10.OWNERSHIP: All rights, including but not limited to copyrights and trade secret rights, to the SOFTWARE belong to Canon, its affiliated corporations and third party licensors. Your use of the SOFTWARE is subject to the laws of the United States, and Canada, and other applicable copyright and trademark laws, and nothing in this Agreement constitutes a waiver of the rights of Canon, its affiliated corporations and third party licensors under such laws. You only own the CD-ROM media in which the Software is stored. Except as expressly provided herein, no license or right, express or implied, is hereby conveyed or granted by Canon to you for any intellectual property of Canon. Nothing contained in Paragraph 1 shall be construed to give Canon any ownership rights in any images, graphics or textual material that you save in connection with the Software.
You may not modify, remove or delete any or all copyright notices (i) which are contained in the Software, including any copy thereof, and (ii) which are on the original CD-ROM and on the medium of a back-up copy made pursuant to Section 2 above.
11.ACKNOWLEDGEMENT: BY USING THE SOFTWARE, YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTOOD IT, AND AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. YOU ALSO AGREE THAT THIS AGREEMENT IS THE COMPLETE AND EXCLUSIVE STATEMENT OF AGREEMENT BETWEEN YOU AND CANON CONCERNING THE SUBJECT MATTER HEREOF AND SUPERSEDES ALL PROPOSALS OR PRIOR AGREEMENTS, VERBAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS BETWEEN THE PARTIES RELATING TO THE SUBJECT MATTER HEREOF. NO AMENDMENT TO THIS AGREEMENT SHALL BE EFFECTIVE UNLESS SIGNED BY A DULY AUTHORIZED OFFICER OF CANON.
Table of contents
Read This First 1
It’s so Simple! Make Prints Right at Home Like a Pro ......................2
Unbounded Possibilities with Entertaining Software .....................4
About the CD-ROMs in Your Package ..............................................6
System Requirements ........................................................................7
Using the Software on the Windows Platform 9
- Preparations -
Installing the Software and USB Driver ..........................................10
Using the Software on the Windows Platform 17
- The Basics -
Starting ZoomBrowser EX ............................................................... 18
Downloading Images to the Computer ..........................................22
Printing Images ................................................................................25
Using the Software on the Windows Platform 29
- Advanced Techniques -
The ZoomBrowser EX Windows ......................................................30
Replaying Movies .............................................................................32
Converting RAW Images - File Viewer Utility ................................33
Merging Panoramic Images - PhotoStitch ......................................35
Operating the Shutter Remotely - RemoteCapture .......................37
Enjoy Customizing Your Camera with the My Camera Settings ...44
iii
Using the Software on the Macintosh Platform 51
- Preparations -
Installing the Software ....................................................................52
Using the Software on the Macintosh Platform 55
- The Basics -
Starting ImageBrowser ....................................................................56
Downloading Images to the Computer ..........................................63
Printing Images ................................................................................66
iv
Using the Software on the Macintosh Platform 69
- Advanced Techniques -
Replaying Movies ............................................................................. 70
Converting RAW Images - File Viewer Utility ................................71
Merging Panoramic Images - PhotoStitch ...................................... 73
Operating the Shutter Remotely - RemoteCapture ...................... 75
Enjoy Customizing Your Camera with the My Camera Settings ..82
Downloading Images with the USB Mounter ................................ 87
Information about Your Camera 91
Information Common to All Models .............................................. 92
PowerShot S50 ................................................................................. 94
PowerShot S400 DIGITAL ELPH/DIGITAL IXUS 400 ......................... 95
PowerShot A70 ................................................................................ 96
PowerShot A60 ................................................................................ 97
PowerShot A300 .............................................................................. 98
PowerShot G3 ..................................................................................99
PowerShot S45 ...............................................................................100
PowerShot S230 DIGITAL ELPH/DIGITAL IXUS v
3
......................... 101
Appendices 103
About the CD-ROMs in Your Package .......................................... 104
Uninstalling the Software ............................................................. 110
Memory Card Folder Structure .....................................................115
Troubleshooting ............................................................................ 116
Index ............................................................................................... 127
Read This First
This chapter explains what you can accomplish using the camera with the software contained on the Canon Digital Camera Solution Disk.
It also lists the computer system configurations required to use the software.
1
Windows/Macintosh
About this Guide
The explanations in this guide are based on Windows XP and Mac OS X v10.2. If you are using another version of these operating systems, the actual screen contents and procedures may vary slightly from those shown.
This guide uses the following notations on the right to represent the items on the left.
Mac OS X (v10.1/10.2) -> Mac OS X Mac OS 9.0 - 9.2 -> Mac OS 9 CF Card, PC Card -> Memory Card
2
It’s so Simple! Make Prints Right at Home Like a Pro
It’s so Simple! Make Prints Right at Home Like a Pro
Shoot the images
See your Camera User Guide for shooting instructions.
Install the software on the computer
Just install the software once at the beginning.
3
Connect the camera to the computer
Download images to the computer
Windows/Macintosh
Print the images
4
Unbounded Possibilities with Entertaining Software
Unbounded Possibilities with Entertaining Software
Print a Variety of Layouts
Print with the diverse layouts available in PhotoRecord (Windows) and ImageBrowser (Macintosh).
The examples shown are from PhotoRecord (Windows).
Stitch a Panorama Together
Create a panoramic image from a series of images with PhotoStitch.
Send an Image as an E-mail Attachment
Attach an image to an e-mail message by starting your mail software from within ZoomBrowser EX (Windows) or ImageBrowser (Macintosh).
Operate the Camera Shutter from the Computer
Release the camera’s shutter from the computer with RemoteCapture. The recorded image is saved directly to your computer.
5
Windows/Macintosh
Release the shutter from the computer.
Convert RAW Images
Use the File Viewer Utility to convert RAW-format images downloaded to the computer into standard photo formats, such as the TIFF and JPEG formats. It can make fine adjustments to the image quality and coloring during conversion. (RAW format images can only be recorded by select camera models.)
6
About the CD-ROMs in Your Package
About the CD-ROMs in Your Package
About the Supplied Software
In addition to the Canon Digital Camera Solution Disk, your camera may be accompanied by other CD-ROMs containing image editing software. Your choice of camera model will determine which disks are included.
See Information about Your Camera (p. 91) to read which disks are included with your model.
For a description of the features and installation procedures for the software on the CD-ROMs, see About the CD-ROMs in Your Package (p. 104).
7
System Requirements
Please install the software on a computer meeting the following minimum requirements.
Windows
OS Windows 98 (First or Second Edition)
Windows Millenium Edition (Windows Me) Windows 2000 Windows XP (Home Edition, Professional)
Computer Model The above OS should be pre-installed on computers with built-
CPU Windows 98/ Windows Me/ Windows 2000: Pentium 150MHz
RAM Windows 98/ Windows Me/Windows 2000: 64 MB or more
Interface USB
Free Hard Disk Space
in USB ports.
or better Windows XP: Pentium 300 MHz or better
Windows XP: 128 MB or more
Canon Utilities
- ZoomBrowser EX: 120 MB or more (Including the PhotoRecord printing program)
- File Viewer Utility: 100 MB or more
- PhotoStitch: 40 MB or more
- RemoteCapture: 20 MB or more
Canon Camera TWAIN Driver: 25 MB or more
Canon Camera WIA Driver: 25 MB or more
Windows/Macintosh
Display 800 x 600 pixels/ High Color (16 bit) or better is required
1,024 x 768 pixels or better is recommended
A CD-ROM drive is required to install the software.
A sound card is required to play movie audio tracks.
All procedures performed with a connection to a USB 2.0 compliant board are not guaranteed.
8
System Requirements
Macintosh
OS Mac OS 9.0 - 9.2, Mac OS X (Version 10.1/ 10.2)
Computer Model The above OS should be pre-installed on computers with built-
in USB ports.
CPU PowerPC
RAM Mac OS 9.0 - 9.2: 20 MB or more of application memory
Interface USB
Free Hard Disk Space
Display 800 x 600 pixels/ 32,000 Colors or better is required
Mac OS X (Version 10.1/ 10.2): 128 MB or more
Canon Utilities
- ImageBrowser: 50 MB or more
- File Viewer Utility: 100 MB or more
- PhotoStitch: 30 MB or more
- RemoteCapture: 15 MB or more
USB Mounter: 5 MB or more
1,024 x 768 pixels or better is recommended
A CD-ROM drive is required to install the software.
•ImageBrowser, File Viewer Utility, PhotoStitch and RemoteCapture are compatible with Mac OS X (v10.1/10.2). However, they are not compatible with disks formatted with the Unix File System (UFS).
• All procedures performed with a connection to a USB 2.0 compliant board are not guaranteed.
Using the Software on the Windows Platform
- Preparations -
This chapter explains the basic procedures for installing the software and connecting the camera to a computer. Read this material before you connect the camera to the computer.
9
Windows - Preparations -
10
Installing the Software and USB Driver
Installing the Software and USB Driver
Start by installing the software from the Canon Digital Camera Solution Disk.
You must install the software before you connect the camera to the computer.
Users of Windows XP Professional and Windows 2000 must first log in as an Administrator (computer system administrator) to install programs.
Items to Prepare
Your computer
Canon Digital Camera Solution Disk supplied with the camera
Installation Procedures
Confirm that the camera is NOT
1
connected to the computer. If it is, disconnect it and the cable from the computer.
Close any programs that are
2
running.
Place the Canon Digital Camera Solution
3
Disk in the computer’s CD-ROM drive.
The installer panel will display automatically.
If the installer panel does not appear automatically, use the procedures in How to Display the Installer Panel on the next page.
Click [Software Installation].
4
Installer Panel
Click [Next].
5
Read the software license agreement and click [Yes] if you consent to
6
all the conditions.
How to Display the Installer Panel
Use the following procedures to display the installer panel if it does not appear automatically.
11
Windows - Preparations -
Windows XP
1. Select [My Computer] from the [Start] menu.
2. Right-click the CD-ROM icon and select [Open].
3. Double-click the [Setup.exe] icon.
Windows 2000, Windows Me, Windows 98
1. Double-click the [My Computer] icon on the desktop.
2. Right-click the CD-ROM icon and select [Open].
3. Double-click the [Setup.exe] icon. (Some computers may not display the [.exe] file name extension as shown above.)
12
Installing the Software and USB Driver
Select your camera model name and click [Next].
7
Just click [Next] if your camera model name does not appear in the list.
Place a check mark beside your camera model name.
Confirm the installation destination and click [Next].
8
Installation destination
Select the programs you wish to install and click [Next].
9
Confirm that there is a check mark beside the names of the programs you wish to install.
The USB Driver (the software for connecting) is required when the camera is connected to the computer with a USB cable. Ensure that you select a USB driver from below (the appropriate one for your operating system).
Windows XP: no driver required for some models*
Windows 2000:Canon Camera TWAIN Driver
Windows Me:Canon Camera WIA Driver
Windows 98:Canon Camera TWAIN Driver
* The Canon Camera WIA Driver is required for Windows XP
with the PowerShot G3, PowerShot S45 and PowerShot S230 DIGITAL ELPH/DIGITAL IXUS v
3
models.
Review the installation settings and click [Next].
10
13
Windows - Preparations -
The items displayed here differ according to the software installed.
The installation will start. Follow the onscreen instructions to proceed.
Click [OK] if the following message appears.
11
This message will display if you selected and installed the USB Driver in Step
9.
14
Installing the Software and USB Driver
When the installation is over, select [Yes, I want to restart my
12
computer now.] and click [Finish].
Users of Windows XP Professional and Windows 2000 must log in as an Administrator (computer system administrator) after restarting to carry out the subsequent procedures.
Remove the disk from the CD-ROM drive
13
when your normal desktop screen appears after restarting.
This concludes the software installation. Continue by connecting the camera to the computer so that the USB Driver can be utilized.
If you installed a USB Driver, so far the required files have only been copied to your computer. You must now connect the camera to the computer with the USB cable to complete the installation and prepare the driver for use.
See Uninstalling the Software (p. 110) to delete the software installed with these procedures.
Attach the camera to the computer and set it to the correct mode for
14
connecting.
Procedures for attaching the camera to the computer and placing it in the correct mode for connecting vary between camera models. See Information about Your Camera (p. 91) for details.
The USB Driver will automatically finish installing onto the computer when you attach the camera and open a connection. Dialogs similar to the following ones will appear during this process (first connection only).
Windows XP
The following dialog will appear after a few moments and the USB Driver will automatically install.
The USB Driver selected in Step 9 will automatically install if you are using a PowerShot G3, PowerShot S45 or PowerShot S230 DIGITAL ELPH/DIGITAL IXUS v
A USB driver supplied with the Windows operating system will automatically install if you are using a camera other than one of the above models.
3
.
15
Windows - Preparations -
Windows 2000/Windows Me/Windows 98
The "Add New Hardware Wizard" will appear after a few moments and the USB Driver will automatically install.
The USB Driver selected in Step 9 will automatically install.
Restart the computer according to the instructions if you are prompted to do so by a message.
The Events dialog will appear after installation, allowing you to select an application to start. The explanation for these procedures is contained in Using the Software on the Windows Platform-The Basics (p. 17).
16
Installing the Software and USB Driver
•See USB Driver Installation not proceeding well in the Troubleshooting section (p. 117) if you are having problems installing the USB Driver.
•See Uninstalling the USB Driver (p. 111) to delete the USB Driver installed with these procedures.
•See If You Were Using ZoomBrowser EX Version 2 or 3 (p.
125) if you were previously using either version.
This concludes the software and USB Driver installation and the procedures for connecting the camera to the computer. You may now download camera images to the computer (p. 22).
Using the Software on the Windows Platform
- The Basics -
This chapter explains the procedures for using ZoomBrowser EX to download the camera's images to the computer and print them.
Read this chapter after completing the preparations in the Using the Software on the Windows Platform - Preparations - section.
17
Windows - The Basics -
18
Starting ZoomBrowser EX
Starting ZoomBrowser EX
Begin by starting up ZoomBrowser EX. The startup procedures vary according to whether you are connecting the camera to the computer or using a memory card reader.
Camera to Computer Connection
Attach the supplied USB cable to the computer’s USB port and the
1
camera’s Digital Terminal. Prepare the camera for communication with the computer.
Procedures for attaching the camera to the computer and placing it in the correct mode for connecting vary between camera models. See Information about Your Camera (p. 91) for details.
A dialog (Events dialog) similar to that below will appear after a moment. Select the application program you wish to start from the list in this dialog.
Your camera model name or "Canon Camera" will appear here.
Select an application program here.
If the above dialog (Events dialog) does not appear, open it with the procedures described in How to Display the Events Dialog on the next page.
Select [Canon ZoomBrowser EX] and click [OK].
2
ZoomBrowser EX will start and open its Camera Window. The camera images will display as thumbnails (tiny versions) in the Camera Window.
Camera Window
Thumbnail
A dialog allowing you to select the camera model will display if a camera and a memory card reader are connected at the same time. Confirm that your model name or "Canon Camera" is displayed and click [OK].
How to Display the Events Dialog
Use the following procedures to start ZoomBrowser EX and display the Camera Window.
19
Windows - The Basics -
Double-click the [ZoomBrowser EX] icon on the
1
desktop.
Click [Camera & Memory
2
Card] when ZoomBrowser EX starts.
Click [Browse & Download
3
Images] in the next menu.
This will display the Camera Window.
20
Starting ZoomBrowser EX
A message asking whether you wish to continue the connection may appear after some camera models are connected to the computer. See Connection Confirmation Message Displays (p. 117) in the Troubleshooting section regarding this message.
Next, download images to the computer (p. 22).
Memory Card Connection
Insert the memory card into the reader.
1
Use a separately sold card adapter (PCMCIA adapter) if required. See the manual for the memory card for its connection and handling instructions.
Place the memory card in an adapter if required.
Start ZoomBrowser EX.
2
Double-click the [ZoomBrowser EX] icon on the desktop.
Insert the loaded adapter into the slot.
Click [Camera & Memory Card].
3
Click [Browse & Download Images] in the next menu.
4
21
Windows - The Basics -
This will display the Camera Window. The memory card images will display as thumbnails (tiny versions) in the Camera Window.
A selection dialog will appear if multiple memory card readers loaded with memory cards are connected or if a camera and memory card reader are connected. Select one of the devices and click [OK].
•See Memory Card Folder Structure (p. 115) for information about memory card folder structures and file names.
Next, download images to the computer (p. 22).
22
Downloading Images to the Computer
Downloading Images to the Computer
Downloading Images to the Computer
Downloading Images to the ComputerDownloading Images to the Computer
Click on images in the Camera Window that you wish to download.
1
The background color of the selected images will change to orange.
Thumbnail
“RAW” displays on RAW image.
If you are downloading images previously selected with the cameras [Transfer Order] setting, click [Select] and select [Select Send Mark].
Click [Download Image].
2
A Download Settings dialog allowing you to select the image destination folder will display.
The movie icon displays on movie thumbnails.
Confirm the destination folder and click [OK].
3
Specify the destination folder for the image(s). (You can change the destination folder by clicking [Browse] and selecting a new destination.)
Select [Create new folder] to create a new folder within the one specified above, and select a naming option.
At this point the Camera Window will close and the Main Window will open. The downloaded images will appear in the Main Window.
23
Windows - The Basics -
Continue by printing out an image (p. 25).
Main Window
24
Downloading Images to the Computer
Other Methods of Downloading Images to the Computer
* Windows XP
Your camera uses a standard image transfer protocol called the Picture Transfer Protocol (PTP). With the PTP and Windows XP, all you need do is connect the camera to the computer with a USB cable to download images. It is easy using the Scanners and Cameras Wizard and other procedures. (You do not even need to install ZoomBrowser EX or the USB Driver.) However, there are some inconveniences and limitations to this downloading method. See the For Windows
See the Picture Transfer Protocol (PTP) Mode leaflet if you are using a PowerShot G3, PowerShot S45, or PowerShot S230 DIGITAL ELPH/DIGITAL IXUS v3. In addition, set the camera's transfer setting to [PTP] if you use this method to download with these models.
®
XP and Mac OS X Users leaflet for details.
* Windows Me (with the USB Driver installed)
It is easy to download images using the Scanners and Cameras Wizard or Windows Explorer. All you need do is connect the camera to the computer with a USB cable. (ZoomBrowser EX does not need to be installed.) However, you cannot download RAW format images or movies with these methods.
See the Windows Help system for information about the Scanners and Cameras Wizard and Windows Explorer.
Loading...
+ 108 hidden pages