Canon PC 1000s, PC1200s, PC1210, PCiR1200s Service Manual 1
SmartBase PC1200s/
iR1200s
REVISION 0
DEC. 2001
COPYRIGHT
©
2001 CANON INC. 2000 2000 2000 2000 CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001
HY8-10AU-000
Application
This manual has been issued by Canon Inc. for qualified persons to learn technical
theory, installation, maintenance, and repair of products. This manual covers all
localities where the products are sold. For this reason, there may be information in this
manual that does not apply to your locality.
Corrections
This manual may contain technical inaccuracies or typographical errors due to
improvements or changes in products. When changes occur in applicable products or in
the contents of this manual, Canon will release technical information as the need arises.
In the event of major changes in the contents of this manual over a long or short period,
Canon will issue a new edition of this manual.
The following paragraph does not apply to any countries where such provisions are
inconsistent with local law.
Trademarks
The product names and company names used in this manual are the registered
trademarks of the individual companies.
Copyright
This manual is copyrighted with all rights reserved. Under the copyright laws, this
manual may not be copied, reproduced or translated into another language, in whole or
in part, without the written consent of Canon Inc.
COPYRIGHT © 2001 CANON INC.
Caution
Use of this manual should be strictly supervised to avoid disclosure of confidential information.
COPYRIGHT
©
2001 CANON INC. 2000 2000 2000 2000 CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001
INTRODUCTION
1 Symbols Used
This documentation uses the following symbols to indicate special information:
Symbol Description
Indicates an item of a non-specific nature, possibly classified as Note, Caution,
or Warning.
Indicates an item requiring care to avoid electric shocks.
Indicates an item requiring care to avoid combustion (fire).
Memo
REF.
Indicates an item prohibiting disassembly to avoid electric shocks or problems.
Indicates an item requiring disconnection of the power plug from the electric
outlet.
Indicates an item intended to provide notes assisting the understanding of the
topic in question.
Indicates an item of reference assisting the understanding of the topic in question.
Provides a description of a service mode.
Provides a description of the nature of an error indication.
COPYRIGHT
©
Refers to the Copier Basics Series for a better understanding of the contents.
2001 CANON INC. 2000 2000 2000 2000 CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001
i
INTRODUCTION
2 Outline of the Manual
This Service Manual provides basic facts and figures needed to service the SmartBase
PC1200 Series/iR1200 Series products in the field, and it consists of the following chapters:
Chapter 1 Product Outline: specifications, names of parts, safety and warnings
Chapter 2 Using the Machine: control panel, user mode, service mode
Chapter 3 Installation: site requirements, installation procedure, work for reloca-
tion
Chapter 4 Operation: mechanical system by function, principles of operation of
electrical systems
Chapter 5 Mechanical System: mechanical construction, disassembly/assembly
Chapter 6 Maintenance and Inspection: periodically replaced parts, durables (life), basic servicing
chart, cleaning
Chapter 7 Troubleshooting: standards/adjustments, troubleshooting image faults,
troubleshooting malfunctions
Appendix: general timing chart, general circuit diagrams
ii
COPYRIGHT
©
2001 CANON INC. 2000 2000 2000 2000 CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001
INTRODUCTION
The descriptions in this Service Manual are based on he following rules:
1. In each chapter, the uses of the function in question and its relationship to electrical and
mechanical systems are discussed and the timing of operation of its associated parts is
explained by means of outlines and diagrams.
In the diagrams, the symbol
represents a mechanical path, while the symbol
with a name next to it indicates the flow of an electric signal.
The expression “turn on the power” means turning on the power switch, closing the
front cover, and closing the delivery cover so that the machine will be supplied with
power.
2. In circuit diagrams (digital), a signal whose level is High is expressed as being ‘1’,
while a single whose level is Low is expressed as being ‘0’; the level of voltage, however, varies from circuit to circuit.
The machine uses CPUs, whose internal mechanisms cannot be checked in the field,
and, therefore, are not explained. In addition, the machine’s PCBs are not intended for
repairs at the user’s and, therefore, are explained by means of bloc k diagrams: two types
are used, i.e., between sensors and inputs of PCBs equipped with a control or drive
function and between outputs equipped with a control or drive function and loads; in addition, functional block diagrams are used at times.
Changes made to the machine for product improvement are communicated in the form of
a Service Information bulletin as needed. All service persons are expected to go through all
service documentation including the bulletins and be equipped to respond to the needs of
the field (as by being able to identify possible causes of problems).
COPYRIGHT
©
2001 CANON INC. 2000 2000 2000 2000 CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001
iii
INTRODUCTION
This service manual covers the models shown in the following table. Be sure to have a
good understanding of the difference from model to model before referring to this manual.
Model
iR1210G
iR1230G
PC1210D
PC1230D
PC1270D
Type
code
UJA
UKA
UGA/
UUK
UHA/
UUM
UIA
ADF
function
√
√
√
Printer
function
√
√
√
√
√
Fax
function
√
Counter
function
√
√
Default
ratio
2R2E
2R2E
2R2E
2R2E
2R2E
The notation “√” indicates that the item in question is available.
Cassette
250 sheets
250 sheets
250 sheets
250 sheets
250 sheets
Copying speed
(cpm) at Direct
12cpm/A4
12cpm/A4
12cpm/A4
12cpm/A4
12cpm/A4
iv
COPYRIGHT
©
2001 CANON INC. 2000 2000 2000 2000 CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001
Contents
CHAPTER 1 PRODUCT OUTLINE
CONTENTS
1 Specifications...................................... 1-1
1.1 Type............................................1-1
1.2 Mechanisms ............................... 1-1
1.3 Functions.................................... 1-2
1.4 Others......................................... 1-3
1.5 Copying Speed........................... 1-4
1.6 ADF (if equipped with ADF
functions) ................................... 1-5
1.7 FAX (if equipped fax functions) 1- 6
1.7.1 Communications
specifications .......................1-6
1.7.2 Scanner section
specifications .......................1-7
1.7.3 Printer section
specifications .......................1-7
1.7.4 Functions ............................. 1-8
2 Names of Parts .................................. 1-12
2.1 External V i e w...........................1-12
2.1.1 Body (ADF type)............... 1-12
2.1.2 Body (copyboard type) ...... 1-13
2.1.3 ADF (if equipped with ADF
functions) ........................... 1-15
2.2 Cross Section ........................... 1-16
2.2.1 Body .................................. 1-16
2.2.2 ADF (if equipped with ADF
functions) ........................... 1-17
3 Safety and Warnings ......................... 1-18
3.1
3.1.1 Safety of the Laser Unit..... 1-18
3.1.2 CDRH Requirements......... 1-18
3.1.3 Handling the Laser Unit .... 1-19
3.2 Safety of the Toner ................... 1-20
3.3 Storing and Handling the
3.3.1 Storing a Cartridge Before
3.3.2 Storing or Handling the
3.3.2.1 Storing After Unpacking1-21
3.3.2.2 Points to Note When
Safety of Laser Light .........1-18
Cartridge .................................. 1-20
Unpacking.......................... 1-20
Cartridge After Unpacking 1-21
Handling the Cartridge . 1-22
CHAPTER 2 USING THE MACHINE
1 Using the Machine.............................. 2-1
1.1 Control Panel ............................. 2-1
2 User Mode .......................................... 2- 5
2.1 User Mode Menu ....................... 2-5
2.2 User Report .............................. 2-17
2.2.1 Manually Generating a
Report ................................ 2-17
2.2.2 Automatically Generating
Reports (if equipped with fax
functions) ........................... 2-18
2.2.2.1 Memory Clear List ....... 2-19
COPYRIGHT
©
2001 CANON INC. 2000 2000 2000 2000 CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001
3 Service Mode .................................... 2-20
3.1 Outline ..................................... 2-20
3.2 Using Service Mode ................ 2-22
3.3 List of Service Mode Menus ... 2-23
3.4 Bit Switch Settings
(#1 SSSW) ...............................2-31
3.5 Menu Switch Settings
(#2 MENU) .............................. 2-44
3.6 Numeric Parameter Setting
(#3 NUMERIC Param.) ........... 2-46
3.7 SPECIAL Setting
(#4A SPECIAL)....................... 2-49
3.8 NCU Setting (#4B NCU)......... 2-49
v
CONTENTS
3.9 ISDN Setting (#4C ISDN) ....... 2-49
3.10 Country/Region of Installation
(#5 TYPE) ................................ 2-49
3.11 Setting the Original Reading
Functions (#6 SCANNER) ...... 2-50
3.12 Setting the Printer Parameters
(#7 PRINTER) ......................... 2-51
3.12.1 #1 SSSW Setting ...............2-51
3.12.2 #2 NUMERIC Param.
Setting ................................ 2-52
3.12.3 #3 PRINT COUNT ............ 2-52
3.12.4 #4 PRINT RESET ............. 2-52
3.12.5 #5 MLT CLEANING......... 2-52
3.13 PDL (#8 PDL).......................... 2-52
3.14 Counter (#9 COUNTER) ......... 2-53
3.14.1 Counter ..............................2-53
3.14.2 Clearing the Counter
Readings ............................ 2-54
3.15 Generating a Report
(#10 REPORT) ......................... 2-54
3.16 Downloading
(#11 DOWNLOAD) ................ 2-54
3.17 Clearing (#12 CLEAR) ............ 2-55
3.18 ROM Indication (#13 ROM) ... 2-55
3.19 Resetting the Contact Sensor Posi-
tion (#14 CS SET) ................... 2-55
3.20 Service Mode Default Setting.. 2-56
3.21 Test Mode (TEST MODE) ...... 2-66
3.21.1 Outline ............................... 2-66
3.21.2 List of Test Mode Items ..... 2-67
3.21.3 D-RAM Test (1: DRAM) .. 2-74
3.21.4 CCD Test (2: CCD TEST) . 2-75
3.21.5 PRINT Test (3: PRINT)..... 2-76
3.21.6 MODEM NCU Test
(4: MODEM NCU) ...........2-77
3.21.6.1 Relay Test ..................... 2-77
3.21.6.2 Frequency Test .............. 2-78
3.21.6.3 G3 Signal Transmission
Test................................ 2-78
3.21.6.4 DTMF Signal Transmission
Test................................ 2-79
3.21.6.5 Tonal/DTMF Signal
Reception Test .............. 2-79
3.21.7 AGING Test
(5: AGING TEST) ............. 2-80
3.21.8 FACULTY (function) Test
(6: FACULTY TEST) ........ 2-80
3.21.9 BOOK Read Test
(8: BOOK TEST) .............. 2-86
3.22 Service Report.......................... 2-87
3.22.1 Manually Generating
Reports...............................2-87
3.22.1.1 SYSTEM (SERVICE)
DATA LIST................... 2-87
3.22.1.2 SYSTEM DUMP
LIST..............................2-88
3.22.1.3 KEY HISTORY
REPORT .......................2-90
3.22.1.4 COUNTER REPORT ... 2-91
3.22.1.5 PRINT SPEC
REPORT .......................2-92
3.22.2 Automatically Generated
Reports...............................2-92
3.22.2.1 Error TX Report
(for service) .................. 2-93
3.22.2.2 RX Report (for service) 2-94
CHAPTER 3 INSTALLATION
1 Selecting the Site ................................ 3-1
2 Unpacking and Installing the
Machine .............................................. 3-2
2.1 Before Starting ........................... 3-2
2.2 Installation Procedure ................3-2
2.3 Unpacking .................................. 3-3
2.4 Fitting the Cartridge................... 3-5
vi
COPYRIGHT
©
2001 CANON INC. 2000 2000 2000 2000 CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001
2.5 Putting Paper in the Cassette ..... 3 -7
2.6 Putting Paper in the Manual
Feed Tray ...................................3-8
2.7 Connecting the Interface Cable.. 3-9
2.8 Connecting the Modular Cable
(if equipped with fax functions) 3-9
2.9 Connecting the Power Cord..... 3-10
CONTENTS
2.10 Fitting the Delivery Tray..........3-10
2.11 Checking the Copy Images ...... 3-10
2.12 Setting the Printer Functions ... 3-11
2.13 Setting Fax Functions (if equipped
with fax functions) ................... 3-12
CHAPTER 4 OPERATION
1 Basic Operation .................................. 4-1
1.1 Reproduction Processes ............. 4 -1
1.1.1 Outline ................................. 4-1
1.2 Functional Construction ............ 4-4
1.3 Outline of the Electrical
Circuitry ..................................... 4-5
1.3.1 Functional Block Diagram .. 4 -5
1.3.2 Outlines of Functions .......... 4-6
1.3.2.1 Image Processor PCB ..... 4-6
1.3.2.2 DC Controller PCB ........ 4-7
1.3.2.3 Control Panel PCB ......... 4-8
1.3.2.4 Power Supply PCB ......... 4-8
1.3.2.5 Analog Processor PCB ... 4-9
1.3.2.6 Sensor PCB..................... 4-9
1.3.2.7 Laser Driver/BD PCB.....4-9
1.3.2.8 Main Motor/Scanner Motor
Driver.............................. 4-9
1.3.2.9 Printer Controller PCB ... 4-9
1.3.2.10 NCU PCB (if equipped with
fax functions)................ 4-10
1.3.2.11 Modular Jack PCB
(if equipped with fax
functions) ...................... 4-10
1.4 Power-On Sequence ................. 4-11
1.5 Controlling the Main Motor .... 4-12
1.5.1 Outline ............................... 4-12
2 Image Reading/Processing System...4-13
2.1 Outline ..................................... 4-13
3 Laser Exposure System .................... 4-14
3.1 Outline ..................................... 4-14
4 Image Formation System .................. 4-16
4.1 Outline ..................................... 4-16
5 Pickup/Feeding/Delivery System .....4-17
5.1 Outline ..................................... 4-17
2.13.1 Setting the Date/Time (user
mode) ................................. 3-12
2.13.2 Setting the Dial Type ......... 3-13
2.13.3 Executing Communications
Testing ............................... 3-13
3 When Relocating the Machine ......... 3-14
5.2 Pickup Operation ..................... 4-18
5.2.1 Pickup from the Cassette ... 4-18
5.2.1.1 Outline ..........................4-18
5.2.1.2 Retry Pickup ................. 4-19
5.2.1.3 Detecting the Size of
Paper ............................. 4-19
5.2.2 Pickup from the Manual
Feed Tray ........................... 4-20
5.2.2.1 Outline ..........................4-20
5.2.2.2 Retry Pickup ................. 4-21
5.2.2.3 Detecting the Size of
Paper ............................. 4-21
5.3 Feeding Operation/Delivery
Operation ................................. 4-22
5.3.1 Outline ............................... 4-22
5.3.2 Auto Delivery Control ....... 4-22
5.4 Reducing the Copying Speed .. 4-23
5.4.1 Outline ............................... 4-23
5.5 Detecting Jams ......................... 4-24
5.5.1 Outline ............................... 4-24
5.5.2 Types of Jams .................... 4-24
6 Fixing System ................................... 4-26
6.1 Outline ..................................... 4-26
6.2 Controlling the Fixing
Operation ................................. 4-27
6.2.1 Controlling the Fixing
Temperature ....................... 4-27
6.2.2 Controlling the Fixing Film
Bias .................................... 4-29
6.2.3 Fixing Heater Safety
Mechanism......................... 4-29
6.2.4 Detecting a Fault in the
Fixing Assembly ................ 4-29
COPYRIGHT
©
2001 CANON INC. 2000 2000 2000 2000 CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001
vii
CONTENTS
7 Power Supply System....................... 4-31
7.1 Low Voltage Circuit ................. 4-31
7.1.1 Lo w Voltage Power Supply
Circuit ................................ 4-31
7.1.2 Protective Functions ..........4-33
7.2 High-Voltage Power Supply
Circuit ...................................... 4-33
7.3 Controlling the ESS
Mechanism ............................... 4-33
7.3.1 Outline ............................... 4-33
7.3.2 Operation ........................... 4-33
8 Others................................................ 4-34
8.1 Fan ........................................... 4-34
8.1.1 Outline ............................... 4-34
8.2 Back-Up Batteries .................... 4-35
8.2.1 Back-Up Function ............. 4-35
8.2.1.1 Outline ..........................4-35
8.2.1.2 Lithium Battery
(BAT1) .......................... 4-35
8.2.1.3 Vanadium Lithium
Secondary Battery
(BAT2) .......................... 4-37
8.2.2 Back-Up Data .................... 4-38
8.2.2.1 Types of Data ................ 4-38
8.2.2.2 Printing the Backup Data
List ................................ 4-40
9 ADF (if equipped with ADF
functions) .......................................... 4-41
9.1 Outline ..................................... 4-41
9.2 Picking Up and Moving
Originals................................... 4-42
9.2.1 Outline ............................... 4-42
9.2.2 Moving Down the Original
Pickup Roller and Moving Up
the Original Stopper .......... 4-43
9.3 Detecting an Original Jam ....... 4-44
9.3.1 Outline ............................... 4-44
9.3.2 Types of Jams .................... 4-44
CHAPTER 5 MECHANICAL SYSTEM
1 Points to Note When Disassembling/As-
sembling the Machine......................... 5-1
2 Disassembly ........................................ 5-3
2.1 Externals/Auxiliary System ....... 5-3
2.1.1 External Covers ................... 5-3
2.1.1.1 Removing the Left Cover/Rear
Cover ................................... 5-4
2.1.1.2 Removing the Right
Cover .............................. 5-4
2.1.1.3 Removing the Front
Cover .............................. 5-5
2.1.1.4 Removing the Delivery
Cover .............................. 5-5
2.1.1.5 Removing the Delivery
Upper Cover/Delivery Rear
Cover .............................. 5-6
2.1.1.6 Removing the Cartridge
Cover .............................. 5-6
2.1.1.7 Removing the Upper
Cover .............................. 5-7
2.1.1.8 Removing the Right
Door................................ 5-8
2.1.2 Removing the Control
Panel .................................... 5-8
2.1.3 Removing the Copyboard
Glass .................................. 5-10
2.1.4 Removing the Main Motor
Unit .................................... 5-10
2.1.5 Remove the Fan ................. 5-14
2.1.6 Removing the Reader Unit
Slide Detecting Switch ......5-16
2.2 PCBs ........................................ 5-17
2.2.1 Removing the Image
Processor PCB ................... 5-17
2.2.2 Removing the Analog
Processor PCB ................... 5-17
2.2.3 Removing the Sensor
PCB.................................... 5-20
2.2.4 Removing the DC Controller
PCB/Power Supply PCB ... 5-21
2.2.5 Removing the Printer
Controller PCB .................. 5-25
viii
COPYRIGHT
©
2001 CANON INC. 2000 2000 2000 2000 CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001
CONTENTS
2.2.6 Removing the NCU PCB
(if equipped with fax
functions) ........................... 5-25
2.2.7 Removing the Modular Jack
PCB.................................... 5-26
2.3 Original Reading/Processing
System ...................................... 5-27
2.3.1 Removing the Contact
Sensor ................................ 5-27
2.3.2 Removing the Reader Motor
Drive Unit .......................... 5-28
2.3.3 Removing the Reader
Unit .................................... 5-30
2.4 Laser Exposure System............ 5-32
2.4.1 Removing the Laser Scanner
Unit .................................... 5-32
2.5 Image Formation System .........5-34
2.5.1Removing the Transfer Charging
Roller ....................................... 5-34
2.6 Pickup/Feeding System ........... 5-35
2.6.1 Removing the Cassette Pickup
Roller ................................. 5-35
2.6.2 Removing the Cassette Pickup
Solenoid ............................. 5-37
2.6.3 Removing the Manual Feed
Tray (upper)....................... 5-39
2.6.4 Removing the Manual Feed
Tray (lower) ....................... 5-39
2.6.5 Removing the Manual Feed
Pickup Roller ..................... 5-40
2.6.6 Removing the Separation
Pad ..................................... 5-41
2.6.7 Removing the Manual Feed
Pickup Solenoid/Manual Feed
Tray Paper Sensor .............. 5-41
2.6.8 Removing the Vertical Path
Roller ................................. 5-42
2.6.9 Removing the Registration
Roller Unit ......................... 5-42
2.7 Fixing System .......................... 5-44
2.7.1 Removing the Fixing
Assembly ........................... 5-44
2.7.2 Removing the Fixing Film Unit/
Fixing Pressure Roller ....... 5-46
2.7.3 Removing the Delivery
Sensor ................................5-47
2.8 ADF System (if equipped with
ADF functions) ........................ 5-48
2.8.1 Externals/Auxiliary Control
System ............................... 5-48
2.8.1.1 Removing the ADF.......5-48
2.8.1.2 Removing the ADF Drive
Unit ............................... 5-50
2.8.1.3 Removing the ADF Motor
Unit ............................... 5-51
2.8.1.4 Removing the Slide Guide
(front, rear) ................... 5-52
2.8.1.5 Mounting the Slide Guide
(front, rear) ................... 5-53
2.8.2 Pickup System ................... 5-54
2.8.2.1 Removing the Separation
Roller Unit .................... 5-54
2.8.2.2 Removing the Original
Pickup roller/Original Sepa-
ration roller ................... 5-56
2.8.2.3 Removing the Original
Sensor/Registration
Sensor ........................... 5-56
2.8.2.4 Removing the Separation
Pad ................................ 5-57
2.8.2.5 Removing the ADF Registra-
tion Roller ..................... 5-58
2.8.3 Feeding System ................. 5-60
2.8.3.1 Removing the White
Roller ............................ 5-60
2.8.3.2 Removing the Feeding Out-
side Guide ..................... 5-61
2.8.3.3 Removing the Feed
Roll ...............................5-62
2.8.3.4 Removing the Original Feed
Roller ............................ 5-63
2.8.4 Delivery System ........... 5-64
2.8.4.1 Removing the Delivery
Stacking Tray/Original
Delivery Roller ............. 5-64
2.8.4.2 Removing the Original
Delivery Sensor ............ 5-65
COPYRIGHT
©
2001 CANON INC. 2000 2000 2000 2000 CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001
ix
CONTENTS
CHAPTER 6 MAINTENANCE AND INSPECTION
1 Periodically Replaced Parts ................ 6 -1
2 Durables .............................................. 6-1
3 Scheduled Servicing Chart ................. 6-1
4 Cleaning .............................................. 6-2
4.1 Cleaning by the User
(machine) ................................... 6-2
4.1.1 Cleaning the Fixing Pressure
Roller ................................... 6-2
4.1.2 Other Cleaning..................... 6 -2
4.2 Cleaning by the User (ADF)...... 6-3
4.2.1 Cleaning the White Roller ... 6-3
4.2.2 Other Cleaning..................... 6 -3
4.3 Cleaning at Time of a Service
V isit (machine) ........................... 6-4
4.3.1 Selfoc Lens Array of the
Contact Sensor..................... 6-4
4.3.2 Cassette Pickup Roller.........6-5
4.3.3 Manual Feed Pickup
Roller ................................... 6-5
4.3.4 Separation Pad .....................6-5
4.3.5 Registration Roller ............... 6-5
4.3.6 Transfer Guide ..................... 6-5
4.3.7 Transfer Charging Roller ..... 6 -5
4.3.8 Separation Static
Eliminator ............................ 6-5
4.3.9 Paper Path ............................ 6-5
4.3.10 Fixing Inlet Guide ............... 6-5
4.3.11 Fixing Pressure Roller ......... 6-5
4.3.12 Delivery Roller ....................6-6
4.3.13 Back of Copyboard Glass
(Back of Shading Plate)....... 6-6
4.4 Cleaning at Time of a Service
Visit (ADF) ................................ 6 -7
4.4.1 Original Pickup Roller......... 6-7
4.4.2 Original Separation Roller... 6-7
4.4.3 Original Separation Pad....... 6-7
4.4.4 ADF Registration Roller...... 6-7
4.4.5 Original Feed Roller ............ 6-7
4.4.6 Original Delivery Roller ...... 6-7
4.4.7 Copyboard Glass
(Original Reading Area) ...... 6-8
CHAPTER 7 TROUBLESHOOTING
1 Standards and Adjustments ................. 7-1
1.1 Checking Against the Standards 7- 1
1.1.1 Checking the Pressure (nip) of
the Fixing Pressure Roller ... 7-1
1.2 Making Adjustments .................. 7-3
1.2.1 Making Adjustments When
Replacing Major Parts .......... 7-3
1.2.2 Preparing a T est Sheet for
Adjustment ........................... 7-4
1.2.3 Adjusting the Mechanical
Systems ................................ 7-5
1.2.4 Adjusting the Electrical
Systems ................................ 7-5
1.2.4.1 Contact Sensor LED Inten-
sity Auto Adjustment ...... 7-5
1.2.4.2 Leading Edge Read Start
Position Adjustment ........ 7-6
1.2.4.3 Left/Right Edge Read Start
1.3 Making Adjustments (ADF) ...... 7-8
1.3.1 Items of Adjustment and
Sequence of Work ................ 7-8
1.3.2 Preparing a T est Sheet for
Adjustment ........................... 7-8
1.3.3 Adjusting the Mechanical
Systems ................................ 7-9
1.3.3.1 Removing the Skew ........ 7-9
1.3.3.2 Left/Right Registration
1.3.4 Adjusting the Electrical
Systems .............................. 7-12
1.3.4.1 Registration Arch Auto
1.3.4.2 Original Read Position
Position Adjustment ....... 7-7
Adjustment .................... 7-10
Adjustment .................... 7-12
Adjustment .................... 7-12
x
COPYRIGHT
©
2001 CANON INC. 2000 2000 2000 2000 CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001
CONTENTS
1.3.4.3 Original Speed
Adjustment ................... 7-13
1.3.4.4 Leading Edge Read Start
Position Adjustment ..... 7-14
1.3.4.5 Trailing Edge Read End
Position Adjustment ..... 7-15
1.4 When Replacing a Component 7-16
1.4.1 When Replacing the Image
Processor PCB ................... 7-16
1.4.1.1 Before Starting the
Work ............................. 7-16
1.4.1.2 After Finishing the
Work ............................. 7-17
1.4.2 When Replacing the
NCU PCB .......................... 7-17
2. Troubleshooting................................ 7-18
2.1 Making Initial Checks.............. 7-18
2.1.1 Site Environment ............... 7-18
2.1.2 Checking the Cartridge......7-18
2.1.3 Checking the Paper............7-18
2.1.4 Others ................................ 7-18
2.2 Troubleshooting Flow Chart .... 7-19
2.3 Making Checks in Response
to an Image Fault ...................... 7-20
2.3.1 Checking the Originals Against
the Symptom......................7-20
2.3.2 Copyboard Glass and White
Sheet .................................. 7-20
3 Troubleshooting Image Faults ..........7-21
3.1 Troubleshooting Procedure for
Image Faults............................. 7-21
3.1.1 The output is too light. ...... 7-22
3.1.2 The output is too dark........ 7-24
3.1.3 The output is foggy
vertically. ........................... 7-25
3.1.4 The output has fuzzy, black
vertical lines. ...................... 7-25
3.1.5 The output is foggy
horizontally . ....................... 7-26
3.1.6 The output has fuzzy, black
horizontal lines. ................. 7-26
3.1.7 The output has black lines
(vertical)............................. 7-27
3.1.8 The output has black lines
(horizontal). .......................7-27
3.1.9 The output has white spots
(vertical)............................. 7-27
3.1.10 The output has white lines
(vertical)............................. 7-27
3.1.11 The output has white spots
(horizontal). .......................7-28
3.1.12 The output has white lines
(horizontal). .......................7-28
3.1.13 The output is soiled. .......... 7-29
3.1.14 The back of the output is
soiled.................................. 7-30
3.1.15 The output has a fixing
fault. ................................... 7-31
3.1.16 The output has left/right
displacement. ..................... 7-32
3.1.17 The output has a blurry
image. ................................ 7-32
3.1.18 The output has poor sharpness
(out of focus). .................... 7-33
3.1.19 The output is blank. ........... 7-34
3.1.20 The output is solid black. .. 7-36
4 Troubleshooting Malfunctions ......... 7-37
4.1 Troubleshooting Malfunctions
(service error)........................... 7-37
4.2 Troubleshooting Malfunctions
(other than service error) .........7-41
4.2.1 Power is absent. ................. 7-41
4.2.2 The LCD fails to operate. .. 7-41
4.2.3 The contact sensor fails to
move. ................................. 7-42
4.2.4 The contact sensor LED fails
to go ON. ........................... 7-42
4.2.5 The speaker fails to generate
sound. ................................7-43
4.2.6 The message “INSTALL
CARTRIDGE” fails to go
OFF. ...................................7-43
4.2.7 The message “SUPPLY REC.
PAPER” fails to go OFF.
(cassette) ............................ 7-44
COPYRIGHT
©
2001 CANON INC. 2000 2000 2000 2000 CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001
xi
CONTENTS
4.2.8 The message “SUPPLY REC.
PAPER” fails to go OFF.
(manual feed tray).............. 7-44
4.2.9 The message “REC. PAPER
JAM” fails to go OFF.........7-45
4.2.10 The message “PLATEN IS
OPEN CLOSE THE PLATEN
Unit” fails to go OFF. ........7-46
4.3 Troubleshooting Malfunctions
(if equipped with ADF
functions) ................................. 7-47
4.3.1 Original pickup fails. ......... 7-47
4.4 Troubleshooting Malfunctions
(printer functions) .................... 7-48
4.4.1 Printing fails to start ..........7-48
4.4.2 Printing stops in the
middle ................................ 7-48
4.5 Troubleshooting
(faults unique to models equipped
with fax functions) ................... 7-50
4.5.1 Troubleshooting Communica-
tion Faults .......................... 7-50
4.5.2 Service Error Code
Output ................................ 7-52
4.5.3 Error Codes........................ 7-52
4.5.3.1 Transmission Level (ATT):
No.07 of Service Soft Switch
#2 MENU ..................... 7-52
4.5.3.2 NL Equalizer: No.05 of
Service Soft Switch #2
MENU .......................... 7-52
4.5.3.3 Transmission Page Timer:
SW12 of Service Soft Switch
#1 SSSW....................... 7-52
4.5.3.4 T0 Timer: No.10 of Service
Soft Switch #3 NUMERIC
param. ........................... 7-52
4.5.3.5 T1 Timer: No.11 of Service
Soft Switch #3 NUMERIC
param. ........................... 7-53
4.5.3.6 RTN Signal Transmission
Condition: No. 02, 03, and
04 of Service Soft Switch #3
NUMERIC param.........7-53
4.5.3.7 Echo Remedy ................ 7-53
4.5.3.8 Echo Protect Tone: SW03
bit 1 of Service Soft
Switch #1 SSSW .......... 7-53
4.5.3.9 Number of Final Flag
Sequences: SW04 bit 2 of
Service Soft Switch #1
SSSW............................ 7-53
4.5.3.10 Subaddress .................... 7-54
4.5.3.11 Password ....................... 7-54
4.5.3.12 Signals .......................... 7-54
4.5.3.13 Timer............................. 7-55
4.5.4 HOW TO RECORD THE
PROTOCOL ......................7-56
4.5.5 Causes and Remedies for User
Error Codes........................7-57
4.5.6 Causes and Remedies for
Service Error Codes...........7-62
4.5.7 Common Faults ................. 7-82
5 Troubleshooting Feeding Faults ....... 7-83
5.1 Outline ..................................... 7-83
5.2 Paper Jams ............................... 7-84
5.2.1 Pickup Assembly
(cassette) ............................ 7-84
5.2.2 Pickup Assembly (manual feed
tray).................................... 7-86
5.2.3 Feeding Assembly ............. 7-88
5.2.4 Fixing Delivery
Assembly ........................... 7-90
5.2.5 Checking the Rotation of the
Rollers and Gears .............. 7-91
5.2.5.1 Checking the Rotation of the
Cassette Pickup Roller and
the Vertical Path
Roller ............................ 7-91
5.2.5.2 Checking the Rotation of the
Registration Roller and the
Gear for the Photosensitive
Drum ............................. 7-91
5.3 Original Jams (if equipped with
ADF functions) ........................ 7-92
5.4 Feeding Faults..........................7-93
5.4.1 Double Feeding ................. 7-93
5.4.2 Wrinkles ............................ 7-94
xii
COPYRIGHT
©
2001 CANON INC. 2000 2000 2000 2000 CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001
CONTENTS
5.5 Faulty Feeding of Originals
(if equipped with ADF
functions) ................................. 7-95
5.5.1 Double Feeding ................. 7-95
5.5.2 Skew .................................. 7-95
6 Arrangement of the Electrical Parts.. 7-96
6.1 Checking the
Photointerrupters...................... 7-96
6.2 Arrangement and Functions of
Electrical Components ............. 7-98
6.2.1 Solenoids, Motors, Fans .... 7-98
6.2.1.1 Body .............................7-98
6.2.1.2 ADF (if eqquiped with ADF
functions) ...................... 7-99
APPENDIX
1 General Timing Chart ........................ A-1
2 General Circuit Diagram.................... A-3
3 List of Special Tools .......................... A-5
4 List of Solvents and Oils ................... A-6
6.2.2 Sensors............................. 7-100
6.2.2.1 Body ...........................7-100
6.2.2.2 ADF (if eqquiped with ADF
functions) .................... 7-101
6.2.3 Others .............................. 7-102
6.2.4 PCBs ................................ 7-104
6.3 Variable Resistors, Light Emitting
Diodes (LED), and Check Pins by
PCB ........................................ 7-106
6.3.1 Image Processor PCB ...... 7-106
6.3.2 DC Controller PCB ......... 7-107
COPYRIGHT
©
2001 CANON INC. 2000 2000 2000 2000 CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001
xiii
CHAPTER 1
PRODUCT OUTLINE
COPYRIGHT
©
2001 CANON INC. 2000 2000 2000 2000 CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001
1 Specifications
1.1 Type
CHAPTER 1 PRODUCT OUTLINE
Item
Body
Copyboard glass
Light source
Lens
Photosensitive medium
1.2 Mechanisms
Item
Reproduction
Charging
Exposure
Copy density adjustment
Development
Pickup
Transfer
Separate
Cleaning
Fixing
Specifications
Desk top (ADF standard type, copyboard standard type)
Fixed
LED
CIS (contact sensor)
OPC drum (30-mm dia.)
Specifications
Indirect electrostatic
Roller contact
Semiconductor laser
Auto or manual
Dry, 1-component toner projection
Cassette: 1 cassette
Multifeeder: 1 feeder
Roller transfer
Static (static eliminator) + curvature
Rubber blade
SURF (on-demand)
COPYRIGHT
©
2001 CANON INC. 2000 2000 2000 2000 CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001
1-1
CHAPTER 1 PRODUCT OUTLINE
1.3 Functions
Item
Original type
Maximum original size
Reproduction ratio
Direct
Reduce I
Reduce II
Enlarge I
Enlarge II
Zoom
Wait time
First copy time
Continuous reproduction
Reproduction size
250-sheet cassette
Manual feed tray
Paper type
250-sheet cassette
Manual feed tray
Cassette
Manual feed tray capacity
Delivery tray capacity
Non-image width
AE
Image mode
Toner save mode
Special mode
Auto power-off
Power save mode
N-on-1
1-on-N memory copy
Auto copy start
Jam recovery
Auto clear
Date/time set
Specifications
Sheet, book, 3-D object (2 kg max.)
A4 (297 × 210 mm / 11.7" × 8.3"), LGL (356 × 216 mm / 14.0" × 8.5")
2R2E
1:1.000
1:0.500
1:0.707
1:1.414
1:2.000
50% to 200% (1% increments)
8.5 sec (after plug in) / 1.0 sec (after pressing Energy Saver key)
21.5 sec (after plug in)
18 sec (after pressing Energy Saver key)
99 pages max.
A4
Width: 76.2 to 216 mm (3.0" to 8.5")
Length: 127 to 356 mm (5.0" to 14.0")
Weight: 56 to 128 g/m
Plain paper (64 to 80 g/m2)
Transparency, label, tracing paper, postcard, thick paper (to 128
2
), envelope
g/m
Claw separation, front loading
10 mm deep, (about 100 sheets of 80 g/m
100 sheets max.
Leading edge: 3.0 ± 2.0 mm (0.12" ± 0.08"), left/right edge: 2.5 ±
1.5 mm (0.10" ± 0.06")
Yes
Yes (text, text/photo, photo)
Yes
Yes: Tracing paper mode, transparency mode, special paper1
mode, special paper2 mode
No
Yes (manually ON/OFF, auto OFF after specific time, auto ON
after fax reception/print data reception)
Yes (in some functions, 2-on-1)
Yes
Yes
Yes
Yes
Yes
2
2
paper)
1-2
COPYRIGHT
©
2001 CANON INC. 2000 2000 2000 2000 CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001
1.4 Others
CHAPTER 1 PRODUCT OUTLINE
Item
Weekly timer
Toner level detection
Cassette paper level detection
LGL size detection
Operating environment
Temperature range
Humidity range
Atmospheric pressure
range
Power supply
Serial number
Power consumption
Maximum
Standby
Operation
Noise
Standby
Copying
Ozone
(after 50000 pages)
Dimensions
Width
Depth
Height
Weight
Consumables storage
Paper
Toner
Specifications
Yes
Yes
Yes
Yes
0° to 35°C / 32° to 95°F
35% to 85%
0.61 to 1.01 hPa (0.6 to 1 atm)
230V (50/60Hz)
UGAxxxx UKAxxxx
UHAxxxx UUKxxxx
UIAxxxx UUMxxxx
UJAxxxx
780 W or less
16 Wh (approx.; reference only)
280 Wh (approx.; reference only)
Copyboard type: 40 dB or less (impulse mode)
ADF type: 40 dB or less (impulse mode: reference)
Copyboard type: 66 dB or less (fast mode)
ADF type: 69 dB or less (fast mode: reference)
0.05 ppm (Ave.)
Copyboard type: 475 mm (18.7"), ADF type: 475 mm (18.7")
Copyboard type: 442 mm (17.4"), ADF type: 442 mm (17.4")
Copyboard type: 295 mm (11.6"), ADF type: 352 mm (13.9")
Copyboard type: 20.5 kg
ADF type: 22.6 kg
Keep wrapped to avoid humidity.
Avoid direct sunshine, and store between 0° and 35°C / 32° and
95°F, between 35% and 85%.
COPYRIGHT
©
2001 CANON INC. 2000 2000 2000 2000 CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001
1-3
CHAPTER 1 PRODUCT OUTLINE
1.5 Copying Speed
Ratio
Size
Paper size
copies/min
Cassette
Manual
feed tray
Direct
Reduce I (50.0%)
Reduce II (70.7%)
Enlarge I
Enlarge II (200.0%)
(141.4%)
A4 (210 × 297mm / 8.3" × 11.7")
A5 (149 × 210mm / 5.9" × 8.3")
A4R → postcard
A4R → A5R
A5R → A4R
postcard → A4R
A4
A5
postcard
A5
A4
A4
12
-
-
-
12
12
12
13
13
13
12
12
*1: If the manual feed tray is in use, the copying speed is indicated assuming that the paper
size setting is correct.
The machine performs 3-step copying speed reduction control designed to prevent cr acking of the fixing heater, otherwise possibly occurring as a result overheating of the ends of
the fixing assembly. (See 5.4 of Chapter 4.)
*1
1-4
COPYRIGHT
©
2001 CANON INC. 2000 2000 2000 2000 CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001
CHAPTER 1 PRODUCT OUTLINE
1.6 ADF (if equipped with ADF functions)
Items
Pickup
Original type
Original size
Original orientation
Original position
Original processing mode
Original reading
Stack
Mixed original sizes
Original AE detection
Original size recognition
Stamp
Power supply
Operating environment
Specifications
Auto pickup/delivery (top separation by double-pad)
2
Single-sided sheet (50 to 128 g/m
A4R, B5R, A5R, B6, LGL, LTRR, STMTR
Length: 128 to 356 mm (5" to 14"), width: 139 to 216 mm (5.5" to
8.5")
Face-down
Center reference
From single-sided to single-sided
Stream reading
30 sheets or less (if A4/LTR or smaller)
15 sheets or less (if LGL)
Yes (only if of the same paper configuration)
No
No
No
From host (5 VDC and 24 V)
Same as host
)
The machine may not be able to handle the following types of originals:
• original with a carbon back
• original made of multiple layers (pasted, bound)
• original with a cut-off, 5 or more holes, or tear
• original with a clip, adhesive tape, or glue
• original with curling, wrinkling, or appreciable bending
• transparency
Advise the user to remove as much curling as possible, if any, and place the original in the
original tray so that the side with the curling is the trailing edge.
COPYRIGHT
©
2001 CANON INC. 2000 2000 2000 2000 CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001
1-5
CHAPTER 1 PRODUCT OUTLINE
1.7 FAX (if equipped fax functions)
1.7.1 Communications specifications
Applicable lines
Analog line (one line)
• PSTN (Public Switched Telephone Network)
Transmission method
Half-duplex
Transmission control protocol
ITU-T T.30 binary protocol/ECM protocol
Modulation method
G3 image signals ITU-T V.27ter (2.4kbps, 4.8kbps)
ITU-T V.29 (7.2kbps, 9.6kbps)
ITU-T V.17 (14.4kbps, 12kbps, TC9.6kbps, TC7.2kbps)
G3 procedure signals ITU-T V.21 (No.2) 300bps
Transmission speed
14.4k, 12k, TC9.6k, TC7.2k, 9.6k, 7.2k, 4.8k, 2.4kbps
With automatic fallback function
Coding
MH, MR, MMR, JBIG
Error correction
ITU-T ECM
Canon express protocol
None
Transmission output level
from 0 to -15 dBm
Minimum receive input level
-43 dBm
Modem IC
CONEXANT FM214
1-6
COPYRIGHT
©
2001 CANON INC. 2000 2000 2000 2000 CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001
CHAPTER 1 PRODUCT OUTLINE
1.7.2 Scanner section specifications
Scanning method
Contact sensor scanning method
Scanning line density
Horizontal:
Standard/Fine/Superfine 203.2 dpi (8 dots/mm)
Ultrafine 406.4 dpi (16 dots/mm) (Interpolated)
Vertical:
Standard 97.79 dpi (3.85 lines/mm)
Fine 195.58 dpi (7.7 lines/mm)
Superfine/Ultrafine 391.16 dpi (15.4 lines/mm)
Scanning density adjustment
Light, Standard, Dark: The density level of each mode can be selected
by the user mode menu.
Half tone
64-gradation error diffusion system
1.7.3 Printer section specifications
Printing resolution
600dpi × 600dpi
Reduction for reception
Fixed reduction (75%, 90%, 95%, 97%)
Auto reduction (70~100%)
COPYRIGHT
©
2001 CANON INC. 2000 2000 2000 2000 CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001
1-7
CHAPTER 1 PRODUCT OUTLINE
1.7.4 Functions
ST AMP
None
FAX/TEL switching
Method CNG detection
Message None
Pseudo CI None
Answering machine connection
Yes (Telephone answering priority type)
CNG detection
DPRD
Yes
Polling
Polling transmission
None
Polling reception
Receives from a fax in automatic transmission mode
One touch locations Max. 12
Confidential reception
None
Confidential transmission
None
Remote reception
Method ID call# (ID input method)
Remote ID (with ID call#) 2 digits (Default : 25)
Memory reception
Yes
1-8
COPYRIGHT
©
2001 CANON INC. 2000 2000 2000 2000 CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001
CHAPTER 1 PRODUCT OUTLINE
Auto dialing
Telephone number digits Average 39 digits
One-touch dial Max. 12
Coded speed dial Max. 100
Group dial Max. 111 (One-touch : 11, Coded speed dial : 100)
Redial Numeric button redial function (max. 120 digits)
Delayed transmission
Locations Max. 122 (One-touch : 12, Coded speed dial : 100)
Numeric button: 10)
No. of reseruation Max. 20
Broadcast transmission
Locations Max. 122 (One-touch : 12, Coded speed dial : 100)
Numeric button: 10)
Group button addresses Max. 111 (One-touch : 11, Coded speed dial : 100)
Relay broadcasting originating
None
Relay broadcasting
None
Closed network
None
Direct mail prevention
None
Dual access
File No. of reservation Max. 21 files
COPYRIGHT
©
2001 CANON INC. 2000 2000 2000 2000 CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001
1-9
CHAPTER 1 PRODUCT OUTLINE
Activity management
a)User report
Activity report
(Every 20 transactions)
TX/RX report
1-touch spd dial list
Coded speed dial list
Group dial list
Memory clear list
User data list
Multi activity report
Document memory list
b)Service report
System data list
System dump list
Key history report
Counter report
Print spec report
Transmitting terminal identification
Items Time, telephone No. (max 20 digits), senders ID, address,
number of transmitted pages (max 3 digits)
Address Can be registered with one-touch/ coded speed dial keys
(16 characters)
Senders ID 20 characters (1 name)
Program key
None
Redial
Interval 2 min. (from 2 to 99 min. can be selected in user data)
Count 2 times (from 1 to 10 times can be selected in user data)
Memory backup
Backup contents dial registration data, user data, service data, time
Backup IC 128 Kbyte SRAM
Backup battery Lithium battery 3.0 V DC / 560 mAh
Battery life Approx. 5 years
1-10
COPYRIGHT
©
2001 CANON INC. 2000 2000 2000 2000 CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001
CHAPTER 1 PRODUCT OUTLINE
Image data backup
Backup contents Memory reception, delayed transmission
and broadcast transmission image data, activity
management report
Backup IC 8 Mbyte SDRAM
Backup coding method JBIG
Backup battery Rechargeable vanadium lithium battery 3.0V DC/ 50 mAh
Battery life 40 cycles with 100% discharge
(Temperature 77°F (25°C))
Time
precision ±60 sec per month
The foregoing specifications are subject to change for product improvement.
COPYRIGHT
©
2001 CANON INC. 2000 2000 2000 2000 CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001
1-11
CHAPTER 1 PRODUCT OUTLINE
2 Names of Parts
2.1 External View
2.1.1 Body (ADF type)
[2]
[3]
[4]
[5]
[12]
[11]
[10]
[9]
[1] Reader unit slide lever
[2] Reader unit
[3] White sheet
[4] White roller
[5] Copyboard glass
[6] Control panel
[1]
[8]
[7]
F01-201-01
[7] Cassette
[8] Delivery tray
[9] Power cord connector assembly
[10] Modular cable connector assembly
[11] USB cable connector assembly
[12] Parallel interface cable connector assembly
[6]
*1
*1: If equipped with fax functions.
1-12
COPYRIGHT
©
2001 CANON INC. 2000 2000 2000 2000 CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001
Loading...