Canon NP66045 Service Manual

SERVICE MANUAL

REVISION 1

FY8-13EL-010

MAR. 1997

IMPORTANT

THIS DOCUMENTATION IS PUBLISHED BY CANON INC., JAPAN, TO SERVE AS A SOURCE OF REFERENCE FOR WORK IN THE FIELD.

SPECIFICA TIONS AND OTHER INFORMATION CONTAINED HEREIN MA Y VARY SLIGHTLY FROM ACTUAL MACHINE VALUES OR THOSE FOUND IN ADVERTISING AND OTHER PRINTED MATTER.

ANY QUESTIONS REGARDING INFORMATION CONTAINED HEREIN SHOULD BE DIRECTED TO THE COPIER SERVICE DEPARTMENT OF THE SALES COMPANY.

THIS DOCUMENTATION IS INTENDED FOR ALL SALES AREAS, AND MAY CONTAIN INFORMATION NOT APPLICABLE TO CERTAIN AREAS.

Printed in Japan

Imprimé au Japon

Use of this manual should be strictly supervised to avoid disclosure of confidential information.

Prepared by

OFFICE IMAGING PRODUCTS TECHNICAL SUPPORT DEPT. 1

OFFICE IMAGING PRODUCTS TECHNICAL SUPPORT DIV.

CANON INC.

30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146 Japan

General Description

introduces the copier's features and specifications,

shows how to operate the copier, and explains how copies are made.

Chapter 2

Basic Operation

provides outlines of the copier's various operational

workings.

Chapter 3

Exposure System

discusses the principles of operation used for the copier's lens drive unit and scanner drive unit. It also explains the timing at which these drive units are operated, and shows how they may be disassembled/assembled and adjusted.

Chapter 4

Image Formation System

discusses the principles of how images are formed. It also explains the timing at which the various units involved in image formation are operated, and shows how they may be disassembled/assembled and adjusted.

Chapter 5

Pick-Up/Feeding System

explains the principles used from when copy paper is picked up to when a copy is delivered in view of the functions of electrical and mechanical units and in relation to their timing of operation. It also shows how these units may be disassembled/assembled and adjusted.

Chapter 6

Fixing System

explains the principles used to fuse toner images to transfer media in view of the functions of electrical and mechanical units and in relation to their timing of operation. It also shows how these units may be disassembled/assembled and adjusted.

Chapter 7

Externals/Auxiliary Mechanisms

shows the copier's external parts, and explains the principles used for the copier's various control mechanisms in view of the functions of electrical and mechanical units and in relation to their timing of operation. It also shows how these units may be disassembled/assembled and adjusted.

Chapter 8

Installation

introduces requirements for the site of installation, and shows

how the copier may be installed using step-by-step instructions.

Chapter 9

Maintenance and Servicing

provides tables of periodically replaced parts

and consumables/durables and scheduled servicing charts.

Chapter 10

Troubleshooting

provides tables of maintenance/inspection, standards/adjustments, and problem identification (image fault/malfunction).

Appendix contains a general timing chart and general circuit diagrams.

INTRODUCTION

This Service Manual provides basic facts and figures needed to service the plain paper copier NP6045 in the field. The NP6045 is designed to enable automated copying work and may be configured with the following system components:

1. Stapler Sorter-E2, Stapler Sorter-G1, Sorter-E1, Sorter-G1

2. RDF-H1

For descriptions on the system components, see their respective service manuals.

This Service Manual covers the copier only, and consists of the following chapters: Chapter 1

The following rules apply throughout this Service Manual:

1. Each chapter contains sections explaining the purpose of specific functions and the relationship between electrical and mechanical systems with reference to the timing of operation.

In the diagrams, represents the path of mechanical drive—where a signal name accompanies the symbol , the arrow indicates the direction of the electric signal.

The expression "turn on the power" means flipping on the power switch, closing the front door, and closing the delivery unit door, which results in supplying the machine with power.

2. In the digital circuits, '1' is used to indicate that the voltage level of a given signal is "High," while '0' is used to indicate "Low." (The voltage value, however, differs from circuit to circuit.)

In practically all cases, the internal mechanisms of a microprocessor cannot be checked in the field. Therefore, the operations of the microprocessors used in the machines are not discussed: they are explained in terms of from sensors to the input of the DC controller PCB and from the output of the DC controller PCB to the loads.

The descriptions in this Service Manual are subject to change without notice for product improvement or other reasons, and major changes will be communicated in the form of

Service Information

bulletins.

All service persons are expected to have a good understanding of the contents of this Service Manual and all relevant

Service Information

bulletins and be able to identify and

isolate faults in the machine.

System Configuration

Stapler Sorter-G1 In addition to the functions of a 20-bin sorter, automatically staples sorted copies.

Sorter-G1 Is a 20-bin sorter capable of automatic sorting and grouping.

Sorter-E1 Is a 20-bin sorter capable of automatic sorting and grouping.

Stapler Sorter-E2 In addition to the functions of a 20-bin sorter, automatically staples sorted copies. Further, it swings out copies to the front for removal, and is equipped with a multiple stacking function, in which two or more sets of copies may be delivered to a single bin.

RDF-H1 Feeds originals one by one from a stack to the copyboard for copying.

NP6045

iii

blank page

CHAPTER 1 GENERAL DESCRIPTION

I. FEATURES.........................................1-1

II. SPECIFICATIONS..............................1-2

1. Type..........................................1-2

2. System .....................................1-2

3. Performance.............................1-3

4. Others.......................................1-6

III. NAMES OF PARTS............................1-9

A. External View.................................1-9

B. Cross Section ................................1-11

1. Cross Section of the Body .......1-11

IV. OPERATIONS ....................................1-12

A. Control Panel.................................1-12

B. Special Features Mode .................1-13

C. User Mode.....................................1-14

1. Types of User Modes...............1-14

V. ROUTINE WORK BY THE USER......1-18

VI. IMAGE FORMATION ..........................1-19

A. Outline ...........................................1-19

CHAPTER 2 BASIC OPERATION

I. BASIC OPERATIONS ........................2-1

A. Functional Construction.................2-1

B. Outline of the Electric Circuitry......2-2

C. Basic Sequence of Operations......2-4

1. Basic Sequence of Operations

at Power-On (1/2).....................2-4

2. Basic Sequence of Operations

at Power-On (2/2).....................2-5

3. Basic Sequence of Operations

during Copying.........................2-7

4. Basic Sequence of Operations

for Page Separation .................2-9

D. Main Motor (M1) Control Circuit....2-11

1. Outline......................................2-11

2. Operations................................2-11

3. Detecting an Error....................2-12

E. Inputs to the DC Controller ............2-13

F. Outputs from the DC Controller .....2-21

G. Inputs to and Outputs from the

Options..........................................2-33

CHAPTER 3 EXPOSURE SYSTEM

I. BASIC OPERATIONS ........................3-1

A. Varying the Reproduction Ratio.....3-1

II. LENS DRIVE MECHANISM...............3-2

A. Moving the Lens............................3-2

1. Outline......................................3-2

2. Moving the Lens.......................3-3

3. Controlling the Lens Motors.....3-3

4. Moving the Lens.......................3-4

III. SCANNER DRIVE MECHANISM.......3-6

A. Driving the Scanner.......................3-6

1. Outline......................................3-6

2. Relationship between Scanner

Sensor and Signals..................3-7

3. Basic Sequence of Operations

for Scanner Movement.............3-8

4. Sequence of Operations for Scanner Movement (page

separation) ...............................3-9

5. Scanner Motor (M3) Control

Circuit .......................................3-11

IV. OTHERS.............................................3-13

A. Detecting the Size of Originals......3-13

1. Outline......................................3-13

2. Operation..................................3-14

3. Sizes of Originals .....................3-15

V. DISASSEMBLY AND ASSEMBLY......3-17

A. Scanner Drive System ...................3-17

1. Removing the Scanner Drive

Assembly Motor........................3-17

2. Outline of the Scanner Drive

Cable........................................3-19

3. Removing the Scanner Drive

Cable........................................3-20

4. Adjusting the Tension of the

Scanner Drive System .............3-22

5. Positioning the Mirror ...............3-23

6. Adjusting the Position of the

Scanner....................................3-24

B. Lens Drive Assembly .....................3-25

1. Removing the Lens Y Direction

Drive Motor ...............................3-25

2. Removing the Lens Stage

Temporarily...............................3-27

3. Installing the Light-Blocking

Belt ...........................................3-28

4. Removing the Lens X Direction

Drive Motor ...............................3-29

5. Attaching the Lens X Direction

Drive Belt ..................................3-30

6. Attaching the Light-Blocking

Belt ...........................................3-30

7. When Replacing the Light-

Blocking Belt.............................3-31

CHAPTER 4 IMAGE FORMATION SYSTEM

I. PROCESSES .....................................4-1

A. Controlling the Surface Potential

of the Drum....................................4-1

1. Outline......................................4-1

2. Control Method .........................4-2

3. Potential Measurement Circuit.4-5

B. Controlling the Scanning Lamp

Intensity.........................................4-6

1. Outline......................................4-6

2. Operations................................4-6

3. Automatic Exposure Control

(AE) ..........................................4-7

4. Check Points............................4-9

C. Controlling the Primary/Transfer

Corona Current..............................4-10

1. Outline......................................4-10

2. Controlling the Primary

Corona Current.........................4-10

3. Controlling the Transfer

Corona Current.........................4-11

D. Controlling the Separation/Pre-

Transfer Corona Current...............4-13

1. Outline......................................4-13

2. Turning ON and OFF the Separation/ Pre-Transfer

Corona Current.........................4-15

3. Separation Corona Current

(DC component).......................4-15

4. Pre-Transfer Corona Current

(DC component).......................4-15

5. Controlling the DC Component Overcurrent of the Separation/ Pre-Transfer Corona Current ...4-16

E. Controlling the Blank Exposure

Lamp (LEDs) .................................4-17

1. Outline......................................4-17

2. Controlling the Activation in

Reduce Mode...........................4-17

3. Controlling the Activation in

Direct Mode..............................4-17

4. Controlling the Activation in

Sheet Frame Erasing Mode.....4-17

5. Controlling the Activation in Original Frame Erasing Mode..4-18

6. Controlling the Activation in

Book Frame Erasing Mode ......4-18

7. Controlling the Activation in

Hole Image Erasing Mode........4-19

8. Controlling the Activation of

AE Mode...................................4-19

F. Drum Heater Circuit .......................4-20

1. Outline......................................4-20

2. Idle Rotation of the Photosensitive Drum and the

Developing Cylinder.................4-22

G. Cleaning the Primary Charging

Wire...............................................4-23

1. Outline......................................4-23

2. Operation of the Primary Charging Wire Cleaning Wire...4-23

H. Cleaning the Pre-Transfer,

Transfer, and Separation

Charging Wires Automatically.......4-24

II. DEVELOPING ASSEMBLY AND

CLEANING ASSEMBLY.....................4-26

A. Outline ...........................................4-26

B. Detecting the Toner Level and

Controlling the Supply Operation ..4-27

C. Controlling the Developing

Bias/Roller Electrode.....................4-29

1. Outline......................................4-29

2. Control Timing..........................4-29

3. Developing Bias Control

Circuit .......................................4-32

4. Roller Electrode Bias Control

Circuit .......................................4-33

D. Detecting the Locking of the

Waste Toner Feeding Screw.........4-35

III. DISASSEMBLY AND ASSEMBLY......4-36

A. Scanning Lamp .............................4-36

1. Removing the Scanning Lamp.4-36

2. Removing the Thermal Fuse ....4-37

B. Standard White Plate Assembly....4-38

C. Pre-Exposure Lamp Unit...............4-40

1. Removing the Pre-Exposure

Lamp Unit.................................4-40

D. Blank Exposure Lamp Assembly ..4-41

1. Removing the Blank Exposure

Lamp Assembly ........................4-41

E. Photosensitive Drum .....................4-42

1. Removing the Drum Unit ..........4-42

2. Replacing the Drum Heater......4-44

3. Installing the Photosensitive

Drum.........................................4-44

F. Potential Sensor Assembly ...........4-44

1. Removing the Potential

Sensor Assembly .....................4-44

G. Primary Charging Assembly..........4-45

1. Removing the Primary

Charging Assembly..................4-45

H. Pre-Transfer Charging Assembly..4-45

1. Removing the Pre-Transfer

Charging Assembly..................4-45

I. Transfer/Separation Charging

Assembly.......................................4-46

1. Removing the Transfer/ Separation Charging

Assembly..................................4-46

2. Installing the Transfer/ Separation Charging

Assembly..................................4-47

J. Charging Wire ...............................4-49

1. Outline......................................4-49

2. Removing the Primary Charging Assembly Wire

Cleaner.....................................4-49

3. Installing the Charging Wire.....4-49

4. Routing the Grid for the

Primary Charging Assembly.....4-51

5. Adjusting the Height of the

Charging Wire ..........................4-53

6. Cleaning the Primary Charging Assembly Anti-Stray Toner

Sheet........................................4-54

K. Developing Assembly....................4-55

1. Removing from the Developing

Assembly..................................4-55

2. Removing the Blade Unit .........4-56

3. Installing the Blade...................4-56

4. Removing the Developing Cylinder and the Magnetic

Seal ..........................................4-57

5. Cleaning the Developing Assembly Anti-Stray Toner

Sheet........................................4-59

L. Hopper Assembly..........................4-60

1. Removing the Hopper

Assembly..................................4-60

M. Drum Cleaner................................4-61

1. Construction .............................4-61

2. Removing the Cleaning Blade..4-61

3. Installing the Cleaning Blade....4-62

4. Installing the Side Seal.............4-63

5. Cleaning the Cleaning Side

Scraper.....................................4-63

N. Separation Claw/Separation

Claw Drive Assembly ....................4-65

1. Removing the Separation Claw/Separation Drive Assembly from the Drum Unit..4-65

O. Waste Toner Feeding Assembly....4-66

CHAPTER 5 PICK-UP/FEEDING SYSTEM

I. PICK-UP/FEEDING SYSTEM............5-1

A. Outline ...........................................5-1

II. PICK-UP FROM THE CASSETTE.....5-3

A. Pick-Up Operation .........................5-3

1. Outline......................................5-4

2. Sequence of Pick-Up

Operations................................5-4

B. Cassette Lifter Operations .............5-5

C. Detecting the Size of Copy

Paper in the Cassette....................5-7

1. Outline......................................5-7

2. Detecting the Size of Paper .....5-7

3. Markings on the Width Guide

Rail ...........................................5-8

4. Paper Sizes..............................5-9

5. Registering Paper Width Basic

Value.........................................5-10

III.

PICK-UP FROM THE PAPER DECK

A. Outline ...........................................5-11

1. Pick-Up Operations..................5-12

....5-11

2. Sequence of Pick-Up

Operations................................5-12

B. Lifter Operations............................5-13

1. Operations................................5-13

2. Deck Limit Detection ................5-14

C. Detecting Paper for the Deck........5-15

1. Detecting the Presence/

Absence of Paper.....................5-15

2. Detecting the Deck Size ...........5-15

D. High-Speed Pick-Up......................5-15

IV. PICK-UP FROM THE

MULTIFEEDER...................................5-16

A. Pick-Up Operation .........................5-16

B. Detecting the Size of Paper in

the Multifeeder...............................5-17

C. Sequence of Operations

(multifeeder) ..................................5-18

V. CONTROLLING THE

REGISTRATION CLUTCH .................5-19

VI. MAKING TWO-SIDED/OVERLAY

COPIES (1st SIDE) ............................5-20

vii

A. Two-Sided/Overlay Copy

Operation .......................................5-20

1. Sequence of Operations for Making Two-Sided/Overlay

Copies (1st side) ......................5-21

B. Making Two-Sided Copies

(2nd side) ......................................5-22

1. Sequence of Operations for Making Two-Sided Copies

(2nd side) .................................5-23

C. Making Overlay Copies

(2nd side) ......................................5-24

1. Outline......................................5-24

2. Outline of Operations ...............5-25

3. Sequence of Operations for

Overlay Copies (2nd side)........5-27

D. Reversal Delivery ..........................5-28

1. Sequence of Reversal

Delivery Operations ..................5-29

E. Switching Paper Sizes for Two-

Sided/Overlay/Reversal Delivery

Copies ...........................................5-30

1. Movement of the Paper Size

Guide........................................5-30

2. Movement of the Paper Jogging Plate and the Rear

Guide Plate...............................5-31

3. Detecting Copy Paper..............5-32

F. Re-Pick Up from the Holding

Tray................................................5-33

G. Skipping.........................................5-34

1. Outline......................................5-34

2. Operation..................................5-34

3. Skip Mode (copying an even

number of originals) .................5-35

4. Skip Mode (copying an odd

number of originals) .................5-37

5. Reverse Delivery......................5-39

VII. DETECTING JAMS............................5-40

A. Outline ...........................................5-40

1. Registration Roller Delay Jam..5-43

2. Registration Roller Stationary

Jam...........................................5-43

3. Pick-Up Vertical Path Feeding

0/1 Delay Jam ..........................5-44

4. Pick-Up Vertical Path Feeding

0/1 Stationary Jam ...................5-44

5. Pick-Up Vertical Path Feeding

2–4 Delay Jam .........................5-45

6. Pick-Up Vertical Path Feeding

2–4 Stationary Jam ..................5-45

7. Fixing Assembly Outlet Delay

Jam...........................................5-46

8. Fixing Assembly Outlet

Stationary Jam .........................5-46

9. External Delivery Delay Jam....5-47

10.External Delivery Stationary

Jam...........................................5-47

11.Internal Delivery Delay Jam .....5-48

12.Internal Delivery Paper

Stationary Jam .........................5-48

13.Holding Tray Inlet Delay Jam...5-49

14.Holding Tray Inlet Stationary

Jam...........................................5-49

15.Holding Tray Re-Pick Up Delay

Jam...........................................5-50

16.Holding Tray Registration

Delay Jam ................................5-50

17.Holding Tray Registration

Stationary Jam .........................5-51

18.Holding Tray Feeding 1/2

Delay Jam ................................5-51

19.Holding Tray Feeding 1/2

Stationary Jam .........................5-52

20.Fixing Assembly Separation

Claw Stationary Jam ................5-52

VIII. DISASSEMBLY AND ASSEMBLY......5-53

A. Multifeeder Assembly ....................5-53

1. Removing the Multifeeder

Assembly..................................5-53

2. Removing the Pick-Up Roller...5-54

3. Installing the Pick-Up Roller.....5-54

4. Removing the Separation

Roller........................................5-55

5. Removing the Feeding Roller...5-57

6. Removing the Multifeeder

Paper Sensor ...........................5-58

7. Attaching the Side Guide Timing Belt for the Multifeeder

Assembly..................................5-60

8. Installing the Feeding Roller of

the Multifeeder..........................5-60

9. Adjusting the Pick-Up/Feeding Roller Pressure (multifeeder) ...5-61

10.Positioning the Pick-Up Roller Releasing Solenoid

(multifeeder) .............................5-61

B. Paper Deck Assembly...................5-62

1. Removing the Paper Deck

Assembly from the Copier ........5-62

2. Removing the Lifter Cable........5-63

3. Changing the Deck Paper

Size ..........................................5-68

4. Adjusting the Registration for

the Deck...................................5-70

C .Cassette/Paper Deck Pick-Up

Assembly.......................................5-71

1. Removing the Pick-Up

Assembly from the Copier ........5-71

2. Removing the Pick-Up Roller...5-71

3. Removing the Feeding Roller...5-73

4. Removing the Separation

Roller........................................5-73

5. Adjusting the Separation

Roller Pressure.........................5-75

6. Orientation of the Separation

Roller........................................5-76

viii

7. Orientation of the Feeding Roller of the Cassette/Deck

Pick-Up Assembly....................5-76

8. Position of the Pick-Up Roller Releasing Solenoid of the

Deck .........................................5-77

9. Position of the Pick-Up Roller Releasing Solenoid for the

Cassette ...................................5-77

10.Adjusting Registration for the

Cassette ...................................5-77

D. Pick-Up Vertical Path Roller

Assembly.......................................5-78

1. Removing the Pick-Up Vertical

Path Roller Assembly...............5-78

E. Registration Feeding Assembly .....5-79

1. Construction .............................5-79

2. Removing the Registration

Feeding Assembly ....................5-79

3. Removing the Registration

Roller (upper rubber)................5-80

F. Feeding Assembly.........................5-82

1. Construction .............................5-82

2. Removing the Fixing/Feeding

Unit...........................................5-82

3. Removing the Feeding Belt ......5-83

G. Holding Tray Assembly..................5-86

1. Construction .............................5-86

2. Removing the Holding Tray

Assembly from the Copier ........5-87

3. Removing the Holding Tray

Re-Pick Up Assembly ..............5-87

4. Removing the Holding Tray

Registration Paper Sensor.......5-88

5. Removing the Re-Pick Up

Roller........................................5-89

6. Removing the Holding Tray

Driver PCB ...............................5-89

7. Removing the Holding Tray Y

Motor ........................................5-90

8. Removing the Y Motor Home

Position Sensor........................5-92

9. Removing the Holding Tray

Inlet Assembly..........................5-92

10.Removing the Feeding Roller/Separation Belt

Assembly..................................5-94

11.Removing the Feeding Roller...5-95

12.Removing the Separation Belt

Assembly..................................5-96

13.Adjusting the Pressure of the Separation Roller of the

Holding Tray.............................5-96

14.Position of the Holding Tray Paper Deflecting Plate Drive

Solenoid ...................................5-97

15.Removing the Side Guide

Plate .........................................5-97

16.Removing the Holding Tray X

Motor ........................................5-98

17.Removing the Holding Tray

Re-Circulating Motor ................5-98

18.Removing the Holding Tray

Paper Jogging Solenoid...........5-99

19.Installing the Holding Tray Paper Jogging Guide Plate

Assembly..................................5-101

20.Installing the Holding Tray Assembly Side Guide Plate

Assembly..................................5-101

21.Attaching the Timing Belt for the Holding Tray Assembly

Paper Jogging Guide Plate......5-102

22.Position of the Holding Tray

Paper Jogging Solenoid...........5-102

H. Holding Tray Feeding Assembly ...5-103

1. Removing the Holding Tray Feeding Assembly from the

Copier.......................................5-103

2. Removing the Sensor from the

Holding Tray.............................5-104

CHAPTER 6 FIXING SYSTEM

I. BASIC OPERATIONS ........................6-1

A. Outline ...........................................6-1

B. Fixing Drive Assembly...................6-2

C. Controlling the Fixing

Temperature ..................................6-3

D. Reciprocating Mechanism for

the Main Thermistor (TH1)............6-8

E. Reciprocating Mechanism for

the Upper Separation Claw...........6-9

F. Fixing Heater SSR Error

Detection Circuit............................6-10

G. Locking the Fixing/Feeding Unit....6-12

H. Error Detection Circuit...................6-13

II. DISASSEMBLY AND ASSEMBLY......6-16

1. Outline......................................6-13

2. Scanning Lamp Error

Activation Detection Circuit ......6-14

3. Fixing Heater Error Activation

Detection Circuit.......................6-15

A. Fixing Assembly ............................6-16

1. Construction .............................6-16

2. Locking Mechanism..................6-16

3. Removing the Fixing Cleaning

Belt ...........................................6-17

4. Installing the Fixing Cleaning

Belt ...........................................6-19

5. Removing the Upper Fixing

Unit...........................................6-20

6. Removing the Fixing Heater.....6-22

7. Installing the Fixing Heater.......6-24

8. Removing the Upper Fixing

Roller........................................6-24

9. Installing the Upper Fixing

Roller........................................6-26

10.Removing the Thermal Switch .6-27

11.Removing the Main Thermistor

(TH1) ........................................6-27

12.Removing the Lower

Separation Claw Assembly ......6-28

13.Removing the Lower Roller......6-29

14.Removing the Upper

Separation Claw.......................6-30

15.Adjusting the Nip (tightening

the pressure adjusting nut).......6-30

16.Adjusting the Fixing Clutch.......6-31

17.Removing the Sub Thermistor

(TH2) Unit .................................6-32

B. Delivery Assembly.........................6-33

1. Construction .............................6-33

2. Removing the Delivery Upper Guide (fixing delivery

assembly).................................6-33

3. Removing the Fixing/Feeding

Locking Assembly ....................6-34

4. Removing the External

Delivery Roller..........................6-34

5. Removing the External Delivery Sensor and the Internal

Delivery Sensor........................6-36

6. Removing the Fixing Assembly Outlet Paper Sensor

Assembly..................................6-36

7. Removing the Internal Delivery

Roller........................................6-37

CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS

I. CONTROL PANEL .............................7-1

A. Outline ...........................................7-1

B. Operation.......................................7-1

1. Data Communication ................7-1

2. LCD Processing .......................7-2

3. LCD Contrast Automatic

Adjustment ...............................7-3

4. Touch Switch Input...................7-4

II. FANS..................................................7-5

III. POWER SUPPLY...............................7-8

A. Outline of Power Supply................7-8

B. Power Supply Circuit.....................7-9

C. Power Supply for Date/Time

Display ...........................................7-11

IV. DISASSEMBLY AND ASSEMBLY......7-12

A. External Covers.............................7-12

1. Removing the Front Door .........7-13

2. Removing the Inside Upper

Cover........................................7-15

3. Removing the Fixing/Feeding

Unit Front Cover.......................7-15

4. Removing the Rear Cover........7-16

5. Sliding Out the Hopper

Assembly..................................7-16

6. Removing the Process Unit......7-17

7. Installing the Process Unit........7-19

B. Control Panel.................................7-20

1. Removing the Control Panel

from the Copier ........................7-20

2. Removing the Control Panel

PCB..........................................7-24

3. Removing the Touch Panel......7-24

4. Removing the Control Panel

CPU PCB .................................7-25

C. Door Switch Assembly ..................7-26

1. Removing the Front Door

Switch Assembly......................7-26

2. Removing the Multifeeder

Door Switch Assembly .............7-27

3. Installing the Drum Heater

Switch.......................................7-27

D. Fan Unit.........................................7-28

1. Removing the Scanner

Cooling Fan..............................7-28

2. Removing the Air Exhaust

Fan ...........................................7-28

3. Removing the Fixing Air

Exhaust Fan.............................7-29

4. Removing the Developing

Fan ...........................................7-29

5. Removing the Cleaner Fan......7-30

6. Removing the Feeding Fan ......7-31

E. Removing the Counter Assembly..7-31

F. Main Motor Assembly....................7-32

1. Removing the Main Motor........7-32

G. Fixing/Waste Toner Drive

Assembly.......................................7-32

1. Construction .............................7-32

2. Removing the Waste Toner

Bottle ........................................7-33

3. Removing the Fixing/Waste

Toner Drive Assembly..............7-33

H. Drive Assembly (drum/

developing assembly)....................7-35

1. Construction .............................7-35

2. Removing the Drive Assembly.7-35

I. Vertical Path Drive Assembly........7-36

1. Construction .............................7-36

2. Removing the Vertical Path

Drive Assembly ........................7-37

J. Pick-Up Drive Assembly................7-39

1. Construction .............................7-39

2. Removing the Pick-Up Drive

Assembly..................................7-39

K. Duplexing Unit Drive 1 Assembly..7-40

1. Construction .............................7-40

2. Removing the Duplexing Unit

Drive 1 Assembly .....................7-40

L. Lifter Drive Assembly ....................7-41

1. Construction .............................7-41

2. Removing the Lifter Assembly .7-42

M. Cassette Pick-Up Drive

Assembly.......................................7-43

1. Construction .............................7-43

2. Removing the Cassette

Pick-Up Drive Assembly...........7-43

CHAPTER 8 INSTALLATION

N. Attaching the Drive Belt.................7-45

O. DC Controller PCB........................7-46

1. Removing the DC Controller

PCB..........................................7-46

2. Points to Note When Replacing

the DC Controller PCB.............7-46

P. DC Power Supply Assembly.........7-47

1. Removing the DC Power

Supply Assembly ......................7-47

Q. High-Voltage Transformer

Assembly.......................................7-48

1. Remove the High-Voltage

Transformer Assembly.............7-48

R. Power Supply Input Assembly ......7-49

I. SELECTING THE SITE......................8-1

II. UNPACKING AND INSTALLATION....8-3

A. Unpacking ......................................8-4

B. Installing the Scanner....................8-6

C. Installing the Fixing Assembly.......8-7

D. Installing the AP Kit and the

Charging Assembly .......................8-9

E. Installing the Copy Tray.................8-15

1. Replacing the Delivery Gear....8-15

2. Replacing the Leaf Springs of

the Delivery Roller....................8-16

CHAPTER 9 MAINTENANCE AND SERVICING

PERIODICALLY REPLACED PARTS

II. CONSUMABLES AND DURABLES...9-2

A. Copier............................................9-2

B. RDF-H1 .........................................9-3

...9-1

CHAPTER 10 TROUBLESHOOTING

F. Checking the Developing

Assembly.......................................8-17

G. Installing the Pick-Up Assembly....8-19

H. Supplying Toner.............................8-20

I. Setting Images/Functions and

User Mode.....................................8-24

III. RELOCATING THE MACHINE...........8-28

IV. INSTALLING THE CONTROL

CARD V..............................................8-29

III. SCHEDULED SERVICING.................9-4

IV. SCHEDULED SERVICING CHART...9-6

A. Copier............................................9-6

B. RDF-H1 .........................................9-8

I. MAINTENANCE AND INSPECTION ..10-3

A. Image Adjustment Basic

Procedure....................................10-3

B. Points to Note for Scheduled

Servicing......................................10-4

II. STANDARDS AND

ADJUSTMENTS...............................10-5

A. Image Adjustment .......................10-5

1. Adjusting the Leading Edge

Margin ....................................10-5

2. Adjusting the Leading Edge Non-Image Width

(registration)...........................10-5

3. Adjusting the Left/Right Registration (paper deck and

cassette position)...................10-5

4. Adjusting the Left/Right Registration (holding tray position; 2nd side of a two-

sided/overlay copy)................10-7

5. Adjusting the Left/Right

]4])..................10-53

III. TROUBLESHOOTING IMAGE

FAULTS............................................10-54

A. Making Initial Checks ..................10-54

1. Site of Installation ...................10-54

2. Checking the Originals...........10-54

3. Copyboard Cover, Copyboard Glass, and Standard White

Plate.......................................10-54

4. Charging Assemblies.............10-54

Margin ....................................10-8

6. AE Auto Adjustment...............10-8

7. Adjusting the AE Slope..........10-9

B. Exposure System ........................10-10

1. Adjusting the Scanner Home

Position...................................10-10

2. Routing the Scanner Drive

Cable......................................10-11

3. Adjusting the Tension of the

Scanner Cable .......................10-12

4. Adjusting the Mirror Position..10-12

5. Cleaning the Mirror (No. 5

mirror) .....................................10-13

6. Installing the Light-Blocking

Belts .......................................10-13

7. Installing the Lens X

Direction Drive Belt ................10-14

C. Image Formation System............10-15

1. Routing the Grid for the Primary Charging Assembly...10-15

2. Adjusting the Height of the

Charging Wire........................10-17

3. Adjusting the Blank Exposure

Lamp ......................................10-18

4. Position of the Roller

Electrode................................10-19

5. Position of the Side Seal in

the Cleaning Assembly ..........10-19

6. Cleaning the Cleaner Side

Scraper ...................................10-19

D. Pick-Up/Feeding System .............10-21

1. Orientation of the Pick-Up

Roller (cassette/deck) ............10-21

2. Orientation of the Separation

Roller (cassette/deck) ............10-22

3. Orientation of the Feeding

Roller (cassette/deck) ............10-22

4. Orientation of the Pick-Up

Roller (multifeeder).................10-23

5. Orientation of the Feeding

Roller (multifeeder).................10-24

6. Adjusting the Pressure of the Separation Roller

(cassette/deck).......................10-24

7. Adjusting the Pressure of the Separation Roller

(holding tray)..........................10-25

8. Adjusting the Pressure of the Pick-Up/Feeding Roller

(multifeeder)...........................10-25

9. Positioning the Pick-Up Roller Releasing Solenoid

(cassette)................................10-26

10.Adjusting the Position of the Pick-Up Roller Releasing

Solenoid (deck)......................10-26

11.Adjusting the Pick-Up Roller Releasing Solenoid

(multifeeder)...........................10-27

12.Routing the Timing Belt for the Multifeeder Assembly Side

Guide ......................................10-27

13.Adjusting the Position of the Delivery Paper Deflecting

Drive Solenoid........................10-28

14.Adjusting the Position of the Holding Tray Paper Deflecting

Plate Drive Solenoid...............10-28

15.Installing the Holding Tray Assembly Side Guide

Assembly ................................10-29

16.Installing the Holding Tray Paper Jogging Guide

Assembly ................................10-29

17.Installing the Timing Belt for the Holding Tray Assembly

Paper Jogging Guide Plate....10-30

18.Adjusting the Position of the Holding Tray Paper Jogging

Solenoid .................................10-30

19.Installing the Drive Belt ..........10-31

E. Fixing System..............................10-32

1. Points to Note When

Handling the Fixing Heater ....10-32

2. Position of the Fixing

Assembly Paper Guide ..........10-32

3. Adjusting the Pressure of the

Lower Roller (nip) ...................10-33

4. Adjusting the Fixing Clutch ....10-34

F. Electrical System.........................10-35

1. When Replacing the DC

Controller PCB.......................10-35

2. Checking the Surface

Potential Control System........10-35

3. Checking the Potential

Control System.......................10-39

4. Potential Control System

Conversion Table ...................10-41

5. Checking the Environment

Sensor....................................10-46

6. Checking the

Photointerrupters ....................10-46

7. Registering the Cassette/ Multifeeder Paper Width Basic Value (

xii

5. Checking the Developing

Assembly ................................10-55

6. Checking the Paper................10-55

7. Checking the Periodically

Replaced Parts.......................10-55

8. Others.....................................10-55

B. Image Fault Samples ..................10-58

C. Troubleshooting Image Faults.....10-59

1. The copy is too light.

(halftone area only)................10-59

2. The copy is too light. (solid

black also)..............................10-60

3. The copy is too light. (overall,

considerably)..........................10-60

4. The copy has uneven density.

(darker at front) ......................10-62

5. The copy has uneven density.

(lighter at front) .......................10-62

6. The copy is foggy. (overall)....10-63

7. The copy has vertical

fogging....................................10-64

8. The copy has black lines.

(vertical, fuzzy, thick)..............10-64

9. The copy has black lines.

(vertical, thin)..........................10-65

10.The copy has white spots.

(vertical)..................................10-66

11.The copy has white lines.

(vertical)..................................10-66

12.The copy has white spots.

(horizontal) .............................10-68

13.The back of the copy is

soiled......................................10-69

14.The copy has fixing faults. .....10-70

15., 16., 17. The copy has

leading edge displacement. ...10-71

18.The copy has a blurred or

fuzzy image............................10-72

19.The copy has horizontal

fogging....................................10-73

20.The copy has poor

sharpness. ..............................10-73

21.The copy is blank...................10-74

22.The copy is completely black...10-74

IV. TROUBLESHOOTING

MALFUNCTIONS.............................10-75

A. Troubleshooting Malfunctions .....10-75

1. E000.......................................10-75

2. E001.......................................10-76

3. E002.......................................10-77

4. E003.......................................10-77

5. E004.......................................10-77

6. E005.......................................10-78

7. E006.......................................10-78

8. E010.......................................10-78

9. E013.......................................10-79

10.E015.......................................10-80

11.E020.......................................10-81

12.E030 (The total copy counter

fails to operate.) .....................10-82

13.E031 (The option counter has

an open circuit.)......................10-82

14.E050.......................................10-83

15.E051.......................................10-83

16.E202 (Locks the keys but

does not indicate a code.) ......10-83

17.E203.......................................10-84

18.E204 (Locks the keys but

does not indicate a code.) ......10-84

19.E210 (The lens X direction

drive system has an error.)....10-84

20.E212 (The lens Y direction

drive system has an error.)....10-84

21.E240.......................................10-85

22.E243.......................................10-85

23.E710/E711..............................10-85

24.E712.......................................10-85

25.E713.......................................10-86

26.E800.......................................10-86

27 E802.......................................10-87

28.AC power is absent................10-88

29.DC power is absent. ...............10-89

30.Pick-up fails............................10-90

31.The deck lifter fails to move

up. ..........................................10-91

32.Pick-up fails. (cassette

pick-up)...................................10-92

33.The lifter fails to move up.

(cassette pick-up)...................10-94

34.Pick-up fails. (multifeeder)......10-95

35.The vertical path roller fails

to rotate..................................10-96

36.The registration roller fails

to rotate..................................10-96

37.The scanner fails to rotate

forward. ..................................10-97

38.The scanner fails to move in

reverse. ..................................10-97

39.The blank exposure lamp fails

to turn ON...............................10-98

40.The pre-exposure lamp fails

to turn ON...............................10-98

41.The pre-exposure lamp fails

to turn ON...............................10-99

42.The hopper motor (M10) fails

to operate...............................10-100

43.The hopper motor (M11) fails

to operate...............................10-101

44.The drum heater fails to

operate...................................10-101

45.The lens fails to move............10-102

46.The Add Toner indicator fails

to turn ON...............................10-103

47.The Add Toner message fails

to turn OFF.............................10-103

48.The Control Card Set

indicator fails to turn ON. .......10-104

xiii

49.The Control Card Set

indicator fails to turn OFF.......10-104

50.Paper jams at the fixing

assembly inlet. .......................10-104

51.The Add Paper indicator fails

to turn OFF.............................10-104

52.The fixing heater fails to turn

ON..........................................10-105

V. TROUBLESHOOTING FEEDING

PROBLEMS......................................10-106

A. Copy Paper Jams........................10-106

1. Pick-up assembly...................10-107

2. Separation/feeding assembly.10-108

3. Fixing/delivery assembly........10-109

4. Fixing/delivery assembly

(reversal delivery)...................10-109

5. Cleaning assembly.................10-110

6. Holding tray assembly (copying on 1st side of two-

sided/overlay copy)................10-110

7. Holding tray assembly

(re-pick up).............................10-111

8. Holding tray assembly

(overlay re-pick up) ................10-111

9. Holding tray feeding

assembly................................10-112

B. Feeding Failure ...........................10-113

1. Double feeding.......................10-113

2. Wrinkling.................................10-113

VI. ARRANGEMENT/FUNCTIONS OF

THE ELECTRICAL PARTS ..............10-114

A. Sensors .......................................10-114

B. Switches and Solenoids..............10-118

C. Motors and Fans.........................10-122

D. Clutches ......................................10-124

E. Lamps, Heaters, and

Photosensors ..............................10-126

F. PCBs ...........................................10-128

G. Variable Resistors, Light-

Emitting Diodes, and Check

Pins by PCB................................10-130

1. DC Controls PCB...................10-130

2. AC Driver PCB.......................10-133

3. DC Power Supply PCB..........10-133

4. Control CPU PCB...................10-134

5. Holding Tray Driver PCB........10-135

6. Potential Measurement PCB ..10-136

7. HVT1 PCB..............................10-137

8. HVT2 PCB..............................10-138

9. Inverter PCB...........................10-138

10.Lamp Regulator PCB.............10-139

11.Counter PCB..........................10-139

VII. SERVICE MODE..............................10-140

A. Outline.........................................10-140

B. Using Service Mode....................10-140

C. Using Adjustment Mode and

Option Setting Mode ...................10-141

D. Control Display Mode ( 1 ) ....10-142

E. I/O Display Mode ( 2 ) ...........10-157

F. Adjustment Mode ( 3 )...........10-193

G. Function Mode ( 4 ) ...............10-211

H. Options Mode ( 5 ) ................10-222

I. Counter Mode ( 6 )................10-231

]]

VIII. SELF DIAGNOSIS ...........................10-237

A. Copier..........................................10-237

B. RDF Self Diagnosis.....................10-242

C. Sorter Self Diagnosis ..................10-243

APPENDIX

A. GENERAL TIMING CHART ..........A-1

SIGNALS AND ABBREVIATIONS

1. Signals......................................A-2

2. Abbreviations............................A-3

C. GENERAL CIRCUIT DIAGRAM ....A-5

...A-2

D. RDF-H1 GENERAL CIRCUIT

DIAGRAM ......................................A-7

E. SPECIAL TOOLS LIST .................A-9

F. SOLVENTS AND OILS..................A-10

xiv

CHAPTER 1

GENERAL DESCRIPTION

I. FEATURES.........................................1-1

II. SPECIFICATIONS..............................1-2

III. NAMES OF PARTS............................1-9

A. External View.................................1-9

B. Cross Section ................................1-11

IV. OPERATIONS ....................................1-12

A. Control Panel.................................1-12

B. Special Features Mode .................1-13

C. User Mode.....................................1-14

V. ROUTINE WORK BY THE USER......1-18

VI. IMAGE FORMATION ..........................1-19

A. Outline ...........................................1-19

This chapter introduces the copier's features and specifications, shows how to operate the copier, and

explains how copies are made.

blank page

CHAPTER 1 GENERAL DESCRIPTION

I. FEATURES

1. The NP6045 is capable of making as many as 45 copies (A4, horizontal) every minute.

2. It uses newly designed pick-up and feeding mechanisms so that it not only helps save space, but it also is less susceptible to jams.

3. It provides high durability and high image quality required of high-speed copying. The use of the Canon-unique A-Si (amorphous silicon) photosensitive drum ensures high durability while the single-component toner projection mechanism promises high-quality images for a long time.

4. It is equipped with a large-size liquid crystal display, offering easy-to-understand instructions.

1-1

CHAPTER 1 GENERAL DESCRIPTION

II. SPECIFICATIONS

1. Type

Body Copyboard Light source Lens Photosensitive

medium

2. System

Body Copying Charging Exposure Copy density

adjustment Development Pick-up Automatic

Manual

Console Fixed Halogen lamp (70 V, 265 W) Zoom lens Amorphous silicon (ø80)

Front deck paper deck type Indirect electrostatographic Corona Slit (moving light source) Automatic or manual

Dry (toner projection) 2 front cassettes

1 front paper deck Multifeeder (5.5 mm deep; 50 sheets of 80 g/m

paper) Transfer Separation Cleaning Fixing

Corona Corona (static separation) Blade Heating roller (790 W + 410 W; 120 V), (1200 W; 220/240 V)

1-2

3. Performance

× 17" 1:1 1:0.500 1:0.707 1:0.816 1:0.865 1:2.000 1:1.414 1:1.224 1:1.154 1:0.490 to 2.040 (1% increments) 5 min or less (at 20°C room temperature)

3.0 sec (A4, non-AE, top cassette/paper deck) 999 copies max. One-sided Metric A3 max. A6 (vertical, postcard) min.

Inch 11" × 17" max. STMT min.

Two-sided Metric A3 max. A5 (horizontal) min.

Inch 11" × 17" max. STMT (horizontal) min.

CHAPTER 1 GENERAL DESCRIPTION

Original type Maximum original size

Direct Reduce I Reduce II Reduce III

Copying ratios

Reduce IV Enlarge I Enlarge II Enlarge III Enlarge IV

Zoom Wait time First copy Continuous copying Copy size

Sheet, book, 3-D object (2 kg max.) A3/11"

1-3

CHAPTER 1 GENERAL DESCRIPTION

Cassette

Paper deck

Automatic

Copy paper type

Automatic

Twosided copying

Multifeeder

Automatic

Overlay copying

Multifeeder

• Plain Paper (64 to 90 g/m2) A3, B4, A4, B5, A4R, B5R, 11" × 17", LGL, LTR, LTR-R, A5, A5R, STMT, STMTR, Foolscap, GLTR, GLTR-R, KLGL, K-LGL-R, OFFICIO, E-OFFICIO, A-OFFICIO, B-OFFICIO, A-LTR, ALTR-R, A-LGL

• Tracing Paper* (SM-1) A3, B4, A4, B5, A4R, B5R

• Colored Paper (Canon-recommended) B4, A4

• Plain Paper (64 to 90 g/m

)

A4, B5, LTR

• Colored Paper (Canon-recommended) A4

• Plain Paper (64 to 90 g/m

) A3, B4, A4, B5, A4, B5R, 11" × 17", LGL, LTR, LTR-R, STMT-R*, postcard

• Tracing Paper (SM-1)* A3, B4, A4, B5, A4R, B5R

• Transparency* (Canon-recommended) A4, LTR

• Colored Paper* (Canon-recommended) B4, A4

• Label Sheet (Canon-recommended) A4, LTR

• Thick Paper* (91 to 200 g/m

• Plain Paper* (64 to 90 g/m

)

) A3, B4, A4, B5, A4R, B5R, 11" × 17", LGL, LTR, LTR-R, A5, STMT

• Colored Paper (Canon-recommended) B4, A4

• Plain Paper* (64 to 90 g/m

) A3, B4, A4, B5, A4R, B5R, 11" × 17", LGL, LTR, LTR-R, STMT-R, A5, STMT

• Colored Paper* (Canon-recommended) B4, A4

• Plain Paper* (64 to 90 g/m

) A3, B4, A4, B5, A4R, B5R, 11" × 17", LGL, LTR, LTR-R, A5, STMT

• Colored Paper* (Canon-recommended) B4, A4

• Plain Paper* (64 to 90 g/m

) A3, B4, A4, B5, A4R, B5R, 11" × 17", LGL, LTR, LTR-R, STMT-R, A5, STMT

• Colored Paper* (Canon-recommended) B4, A4

1-4

CHAPTER 1 GENERAL DESCRIPTION

Tray

Non-image width

Auto Clear

Claw Cassette

Paper deck

Copy tray Leading edge

Trailing edge

Left/right (1st side)

Left/right (2nd side)

A4 horizontal, B5 horizontal, B4, A3, LTR horizontal

None 55 mm deep

(500 sheets each of 80 g/m

paper)

162 mm deep

paper)

)

(about 1500 sheets each of 80 g/m 250 sheets (approx.; A3, 80 g/m

4.5±1.5 mm in Direct (4.5±1.5 mm in non-Direct, Overlay, Two-sided)

2.0 ±1.0 mm (2.0 ±1.0 mm in non-Direct, Overlay, Two-sided)

2.75±2.5mm

Provided (2 min standard; may be changed from 0 to 9 min in 1-min increments and from 0 to 50 sec in 10-sec increments)

Auto Power-Off

Accessory

Provided (1 hr standard; may be changed from 0 to 2 hr; in 10-min increments up to 1st 1 hr, in 1hr increments up to 24 hr)

• Stapler Sorter-E2 • Sorter-E1

• Stapler Sorter-G1 • Sorter-G1

• CC-V • Cassette Heater

1-5

CHAPTER 1 GENERAL DESCRIPTION

4. Others

Front paper deck

Operating environment

Power supply

Power consumption

Noise

Ozone (avr over 8 hr)

Temperature Humidity Atmospheric

pressure 120 V

220/240 V(ITA) 220/240 V(UK) 220/240 V(FRN) 220/240 V(GER) 220/240 V(AMS) 220/240 V(CA) 220/240 V

Maximum Standby Continuous

copying Copying Standby

7.5° to 32.5°C/45.5° to 90.5°F 5 to 80% RH

810.6hPa to 1013.3hPa (0.8 to 1.0 atm) NGQ XXXXX

FGB XXXXX DGB XXXXX BGB XXXXX AGB XXXXX UBW XXXXX, CGB XXXXX RBJ XXXXX PCL XXXXX, EGB XXXXX

1.5 kW or less

0.3 kWh or less (reference only)

1.2 kWh or less (reference only) 71 dB or less (sound power level by ISO standards)

50 dB or less (as required)

0.05 ppm or less

Width

Dimensions Depth

Height

Weight

Copy paper

Consumables

Toner

620 mm/24.4 in 725 mm/28.5 in 1136 mm/44.7 in 187 kg/412.2 lb (approx.; w/RDF) Keep wrapped to protect against moisture. Avoid direct sunshine, and store at 40°C, 85% or less.

1-6

CHAPTER 1 GENERAL DESCRIPTION

(50%)

(70%)

III

(81%)

(86%)

(200%)

(141%)

III

(122%)

(115%)

Copies/min

24 45 30 45 35 39

44 35

39 45

35 30

45 23

24 29 45

30 24

Copy size

A3 A4 B4

B5 A4R B5R

A5R A4R

B5R

A5 A4R

Size A3(297 × 420mm) A4(210 × 297mm) B4(257 × 364mm) B5(182 × 257mm)

A4R(297 × 210mm) B5R(257 × 182mm)

A3 → 5R A3 → 4R

B4 → B5R

A4 → A5

B4 → A4R

A3 → B4 A4 → B5

A5R → A3 A4R → A3

B5R → B4

A5 → A4

A4R → B4

B4 → A3 B5 → A4

Reduce

Ratio

Direct

Enlarge

Table 1-201 Copying Speed (copier only)

1-7

CHAPTER 1 GENERAL DESCRIPTION

Reduce

Enlarge

Ratio

Direct

(50%)

(64.7%)

III

(73.3%)

(200%)

(129.4%)

III

(121.4%)

Size

LTR

11” × 17”

LGL

LTRR

STMT/STMTR

11” × 17” → STMTR

11” × 17” → LTRR

11” × 15” → LTRR

STMR → 11” × 17”

LTRR → 11” × 17”

LGL → 11” × 17”

Copy paper size

LTR

11” × 17”

LGL

LTRR

STMT/STMTR

STMTR

LTRR

11” × 17”

Copies/min

45 24 30 37 45

Table 1-202 Copying Speed (copier only)

Specifications are subject to change without notice.

1-8

III. NAMES OF PARTS

A. External View

Figure 1-301

CHAPTER 1 GENERAL DESCRIPTION

1-9

q Copy tray

w RDF

e Toner supply mouth

r Power switch

t Original tray/manual holder

y Multifeeder

u Upper right door

i Lower right door

o Paper deck

!0 Cassette 3

!1 Cassette 4

!2 Front door

CHAPTER 1 GENERAL DESCRIPTION

@1 Fixing/feeding assembly

@2 Fixing assembly knob

@3 Fixing/feeding assembly releasing

lever

@4 Toner hopper

@5 Holding tray feeding knob

@6 Holding tray feeding assembly

@7 Holding tray assembly

@8 Holding tray knob

Figure 1-302

1-10

B. Cross Section

qwer

tyuio!0!1!2!3!4!5!6 !8

@1@2@3@4@5@6@7@8@9

1. Cross Section of the Body

CHAPTER 1 GENERAL DESCRIPTION

q No. 3 mirror

w No. 2 mirror

e Heat absorption

r Scanning lamp

t No. 1 mirror

y Fixing assembly

u Copyboard glass

i Fixing cleaner belt

o Lens

!0 Drum cleaning

!1 Pre-exposure lamp

!2 Primary charging

assembly

@2 Registration roller

@3 Transfer/separation

!3 Potential sensor

glass

!4 No. 6 mirror

!5 Blank exposure lamp

@4 Feeding belt

@5 Duplexing unit

!6 Developing cylinder

!7 No. 4 mirror

!8 No. 5 mirror

!9 Multifeeder pick-up

@6 Holding tray

@7 Fixing roller

@8 Holding tray pick-up

roller

@9 Delivery roller

assembly

@0 Roller electrode

@1 Pre-transfer charging

assembly

feeding assembly

(crescent) roller

Figure 1-303

1-11

IV. OPERATIONS

A. Control Panel

Figure 1-401

Figure 1-402

Ready to copy.

LTR

REDUCE DIRECT ENLARGE

LIGHT DARK

PAPERSELECT

FIT IMAGE

ZOOM

SORTER

2-SIDED

SPECIAL FEATURES

START

STOP

RESET

CHAPTER 1 GENERAL DESCRIPTION

1-12

q Touch panel display w Guide key e Reset key r Keypad t Display Contrast key y Energy Saver key u Stop key

i Toner supply mouth o Pilot lamp !0 Copy Start key !1 Clear key !2 Interrupt key !3 User Mode key !4 Preferences key

+ 654 hidden pages

Canon NP66045 Service Manual

CONTENTS

CHAPTER 1

I. FEATURES

II. SPECIFICATIONS

III. NAMES OF PARTS

IV. OPERATIONS