How it Works
Canon
Loading...
MF6540
Getting Started Guide
34 pgs6.53 Mb0
Operation Manual
270 pgs20.03 Mb1
Owner's Manual
82 pgs2.44 Mb1
Reference Guide
292 pgs11.59 Mb0
Service & Support Excellence Brochure
2 pgs8.51 Mb0
Table of contents
Loading...

Canon MF6540, MF6590, MF6595, MF6595cx Getting Started Guide

Starter Guide
Please read this guide before operating this product. After you nish reading this guide, store it in a safe place for future reference.

Contents

What You Can Do with the Machine ..................................................................................................................... 1
Find Your Purpose on the Machine ...................................................................................................................... 2
Set Up the Machine ................................................................................................................................................. 3
Do You Have Everything? .................................................................................................................................................3
Manuals for the machine ......................................................................................................................................3
Install Toner Cartridge ....................................................................................................................................................... 4
Set Up the Paper Cassette and Load Paper ...............................................................................................................7
Connect the Power Cord and Turn On the Machine ..............................................................................................8
Set the Date and Time .......................................................................................................................................................9
Before FAX Setting (MF6595cx/MF6595/MF6590 Only) ................................................................................ 10
If Necessary to Use Pulse Dialing .....................................................................................................................11
Set the Machine for Sending Faxes (MF6595cx/MF6595/MF6590 Only) .................................................... 12
Entering Information ............................................................................................................................................12
Guidelines for Entering Information ...............................................................................................................13
Set the Machine for Receiving Faxes (MF6595cx/MF6595/MF6590 Only) ................................................. 14
About the Receiving Modes ..............................................................................................................................15
Software Settings with Computer ...................................................................................................................... 16
Network Connection (MF6595cx/MF6595/MF6590 Only) ......................................................................16
USB Connection .....................................................................................................................................................16
MF Drivers & Toolbox ...........................................................................................................................................17
Bundled Programs .................................................................................................................................................18
Manuals .....................................................................................................................................................................18
Connect the Machine to a Network ................................................................................................................19
Automatic Setting .................................................................................................................................................19
Manual Setting .......................................................................................................................................................20
Installation Procedure ..........................................................................................................................................21
Checking the Installation ....................................................................................................................................24
Installation Procedure ..........................................................................................................................................25
Checking the Installation ....................................................................................................................................28
Appendix ................................................................................................................................................................. 29
Uninstalling the MF Toolbox (USB Connection Only) ...............................................................................29
Uninstalling the MF Drivers ...............................................................................................................................29

What You Can Do with the Machine

You can use the following functions with imageCLASS MF6500 Series.
1

Find Your Purpose on the Machine

For using each function (COPY, FAX, PRINTER, SCANNER, PC FAXING, REMOTE UI), follow the settings in the owchart below. For example, when you use copy function only, follow “Necessary Settings”. When you use both copy and fax functions, follow “Necessary Settings” and “Fax Settings”.
2

Set Up the Machine

Unless otherwise mentioned, illustrations used in this manual are those taken when no optional equipment is attached to the imageCLASS MF6595, and also the menus described in this manual are based on the model MF6595. Depending on the model of your machine, some settings may not be available and the number on the top of each menu may vary.

Do You Have Everything?

Machine● Paper Cassette*● Toner Cartridge●
Power Cord● Telephone Cable**● Destination Labels**● Ferrite Core for USB Cable**●
Limited Warranty Notice
●
Registration Card
●
Starter Guide (This Document)
●
Basic Operation Guide
●
User Software CD
●
Unpacking Instruction Sheet
●
* MF6595cx/MF6595 only (Optional for MF6595)
**MF6595cx/MF6595/MF6590 only

Manuals for the machine

Starter Guide:
●
Machine set-up and software installation (This Document)
Basic Operation Guide:
●
Basic operation features
Use the handles (on the left side) and the hand grips (on the right side) to lift the machine. Be sure at least two people lift the machine.
(User software CD)
Reference Guide:
●
Total operation features (Also includes the basic operation guide contents.) Scanner Driver Guide:
●
Scanner settings
3
Set Up the Machine

Install Toner Cartridge

1 Remove the toner cartridge from the bag. Keep
the bag for future use.
Do not open the drum protective shutter (A).
3 Remove the seals (2 places).
4 Bend back the blue plastic pull tab as in the
illustration above.
2 Gently rock the toner cartridge several times to
evenly distribute the toner inside.
Do not remove the pull tab as it is used to pull out the toner when the cartridge needs replaced.
4
Set Up the Machine
5 Place the toner cartridge on a at surface and
pull the seal completely out.
Do not pull the seal out at an angle.
If toner is adhered on the removed seal, be careful that
–
your hands or clothes do not get dirty from touching the toner. If your hands or clothes get dirty from touching the toner,
–
wash them immediately in cold water. Do not use hot water. If you do, the toner may be set permanently.
7 Hold the toner cartridge by its handle. Insert the
toner cartridge into the machine with the arrows (A) on the toner cartridge pointing toward the machine.
8 Insert the toner cartridge so that the left edge
of the toner cartridge (A) and the protrusions on the right side of the toner cartridge (B, C) t into the guides inside the machine. The blue plastic pull tab should be pulled up as illustrated in step 4.
6 Open the left cover.
5
Set Up the Machine
9 Push the toner cartridge to make sure it is
properly set in the machine.
Do not touch the xing assembly (A) as it becomes very hot during use.
10 Close the left cover.
Be careful not to get your ngers caught.
–
If you cannot close the left cover, do not force it to close.
–
Open the cover and make sure the toner cartridge is properly set in the machine.
6

Set Up the Paper Cassette and Load Paper

Set Up the Machine
1 Pull out the paper cassette until it stops. If you
use LTR size, go to step 4. If you use other sizes, go to step 2.
2 Incline the rear paper end guide until it is
unlocked, then remove it from the paper cassette.
4 Even the edges of the paper stack.
5 Load the paper stack print side up.
Make sure the back edge of the paper stack touches the rear paper end guide (A), the paper stack does not exceed the load limit mark (B), and the load is under the small ns (C) on the paper guides.
By default, the guide is set to LTR.
3 Attach the guide to the slots of the desired
paper size.
6 Gently insert the paper cassette as far as it will
go.
Be careful not to get your ngers caught.
You can load the paper into the additional paper cassette
–
(standard for MF6595cx and optional for MF6595). For attaching the additional paper cassette, see the instruction sheet that comes with the machine. For loading paper in the multi-purpose tray, see
–
Chapter 2, “Document and Paper,” in the Basic Guide.
7
A T E X T
1 0 0 % L T R
0 1
A T E X T
1 0 0 % A U T O
0 1
Set Up the Machine

Connect the Power Cord and Turn On the Machine

1 Connect the power cord into the rear socket on the back side of the machine and the wall outlet, and press
the [I] side of the main power switch (A) to ON.
2 The machine enters the standby mode.
MF6595/MF6590/MF6540/MF6520
MF6595cx or MF6595 with the optional cassette
The LCD display turned o:
●
The machine may enter the sleep mode while you are setting up the machine. Press [POWER] to turn the machine back on and continue the setup.
<CLOSE COVER LEFT COVER> is displayed:
●
Make sure that the left cover is closed properly. (See “Install Toner Cartridge,” on p. 4.)
<TONER IS NOT SET INSERT TONER> is displayed:
●
Make sure that the toner cartridge is installed properly. (See “Install Toner Cartridge,” on p. 4 and “Set Up the Paper Cassette and Load Paper” on p.
7.)
Any data stored in the memory, including received fax documents, will be deleted about 60 minutes after you turn o the main power switch or unplug the power cord.
8
Set Up the Machine
1 2 / 3 1 /
´ 0 7 1 1 : 1 9
D A T E & T I M E S E T T I N G
Ex.
Set Up the Machine

Set the Date and Time

Before using the machine, you MUST set the current date and time. The current date and time settings are used as standard timer settings for functions that require them.
Entering Information
●
Numeric keys: Enters numbers.
‒
[ ] or [ ]: Moves the cursor position.
‒
[OK]: Conrms the entry.
‒
1 Press [Additional Functions]. 2 Press [ ] or [ ] to select <6. TIMER
SETTINGS>, then press [OK].
3 Press [ ] or [ ] to select <1. DATE&TIME
SETTING>, then press [OK].
4 Use the numeric keys to enter the date (month/
day/year) and time (in 24-hour/military time format), then press [OK].
If you accidently enter an incorrect number, press [ ] or [ ] to move the cursor to the number that needs correcting and overwrite it.
5 Press [Stop] to return to the standby mode.
You can select one of the following three date formats in
–
<2. DATE TYPE SELECT>.
<MM/DD/YYYY>
–
<DD/MM YYYY>
–
<YYYY MM/DD>
–
By default, <5. DAYLIGHT SV. TIME> in the <6. TIMER
–
SETTINGS> menu is set to <OFF>. If you want to set <5. DAYLIGHT SV. TIME> in the <6. TIMER SETTINGS> menu to <ON>, see Chapter 1, “Before Using the Machine,” in the Basic Operation Guide.
The LCD display turned o:
●
The machine may enter the sleep mode while you are setting up the machine. Press [POWER] to turn the machine back on and continue the setup.
9
Loading...
+ 23 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use